Netflix on Apple TV not showing search results

Hey, a few months ago the Netflix search function on my Apple TV stopped working. I do the search in the search box, but the area on the right, where the search results are supposed to show, remains black. I have restarted, signed in and out of Netflix, tried all I can think of with no results. This is only a Neflix on Apple TV issue, as all other Apple TV apps have the search function working fine.
Please help!

I had this exact problem and finally thought to check online at the Apple forums here for an answer. This came up after looking at one or two other questions in the search.
I'm happy to say that the restore of the Apple TV worked. Search in NetFlix on the Apple TV now shows results.
My Apple TV is the latest generation I think, have had it for almost two years. It was already upgraded to the latest Apple TV software. I'm guessing that a bug snuck in at some point over the years and over multiple software updates.
Upon restore, I noticed a feature I didn't realize existed, which is that you can start using the Bluetooth in your iPhone or iPad to immediately help with Apple TV setup. You need Bluetooth on and to place the device near/on the Apple TV. This is a feature I know I've seen many commenters request, but apparently not realize this was possible? Or maybe this is a new feature in the latest software update?

Similar Messages

How to prevent Mac OS X's Finder not to show search results from other accounts?

Hello.
How do I have Mac OS X 10.8.3 not show searched file results, on Mac, from other accounts with a standard account? I noticed a standard account found files (test.txt in an admin account in a standard account) and can open them! :O
Thank you in advance.

Barney-15E wrote:
If I'm reading your path correctly, it is because you created the folder at the root of your Home directory.
As I stated above, all users can read your home directory, in order to see into the Sites and Public folders.
Other users, including Admin users, cannot see into the default folders in the Home folder, except Sites and Public.
When you create a folder at the root of your home folder, it inherits the permissions of the parent folder, which allows everyone to read that folder.
If you create a folder at the root of your home, you have to set the permissions on it to prevent others from being able to read it.
To do so, Get Info on the folder and unlock the padlock on the Sharing and Permissions section.
Make sure you are the owner of the folder. Select your name from the list, or add it if it is not. Then, click on the gear button and if it is available, select "Make username the owner." If it is not available, you are already the owner. Also make sure you have Read & Write access. Then, select the staff group and delete it. Then, select everyone and set to No access. Then, select Apply to Enclosed from the gear menu.
To avoid all of this, make your folders inside the default folders (Documents, Pictures, Music, etc.), or one you've already change the permissions on. The Sites and Public folders are visible to all.
Interesting. I didn't want to use Apple's default folders. I want to make my own. I tried chmod -R 700 on my account and that seems to work. Is that enough? I don't see Staff anymore through Get Info.

IOS 8: spotlight not showing wikipedia result snippets

hi
running 8.0.2.
iOS 8: spotlight not showing wikipedia result snippets.
it does show the static Search Wikipedia link however.
how to get the spotlight search snippets of wikipedia to show, as advertised?
thanks

Turn Spotlight Suggestions on and off a few times. If it still doesn't work try a reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
I'm using a iPad but I can't see that making a difference.

After upgrading to iOS 8, the weather app does not show up results for any of the Indian States/cities

After upgrading to iOS 8 on my iPhone 5, the weather app does not show up results for any of the Indian States/cities. Can Apple look into this or does anyone have a solution to this.

Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc") upwards. I thought it was gone too but it's still there~just takes different way to access it.

Altavista will not display search results

altavista us will not display search results. altavista canada works fine. On us site results will display in no style page but not in basic page style. The page comes up blank. This may have been caused by delta search. I think I have rid my computer of delta? Reloaded firefox. I use norton 360 and have run registry clean up and virus scans. Also cleaned explorer. In explorer the u.s. altavista works ok that is why I think it something to do with firefox and delta search showed up at the same time unwanted and forced a change on my home page. Have cleared computer of what delta files I could find my have something in the registry but I would not know what to look for or to do with. I am running xp

In a round about way you solved my problem cor-el ! At the end of standard diagnostic there was mention of malware so I ran malwarebytes before running profile manager. malwarebytes found 21 items some in the registry. deleted these items and tried altavista us again and to my surprise it is working ok now.I thought norton 360 would catch such things but I guess it doesn't ! will keep and run a malware program from now on. thank you for your help.

Disk Utility does not show any result....

Dear Apple Community,
on my mid 2012 Mac Book Air the disk utility test does not show any result. The test just stops at some point and can be restarted again, but does not show weather the SSD is damaged or not.
Does anyone know what this means?
Thanks a lot for your advice!

I think this happens to everyone (who uses "Live Verification") in Mavericks. Occasionally the output from the test shows correctly, but usually not. I guess this will get fixed someday.
Apple - Mac OS X - Feedback
For now, probably you will get best results from using command-r at startup to get into "recovery mode", then run disk utility from there.
charlie

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

Apple tv not showing up in devices on itunes. Content gone from the apple tv and I'm not sure how to sync.

Apple tv not showing up in devices on itunes. Content gone from the apple tv and I'm not sure how to sync.

Welcome to the Apple Community.
Re-pair your library with iTunes.
Settings/computers, disconnect your library, then remove the Apple TV from iTunes prefs if necessary.
Then settings/computers/connect to iTunes.

Business rule not showing the result

When i am executing a business rule, it runs successfully but it does not show any result. But when i enter any amount in that specific cell where the BR should calculate the amount and then run the BR then it shows me the required result. What can be the reason for that?
We are on 11.1.2
and im making BRs through Calc Manager (Wizard Based)
Edited by: ar_aff on Mar 24, 2011 9:56 PM

I think that's about Block problem (value of a cell). The BR can't open block automatically. In BR sorce usually used a command Set Createnonmissngblk on before calculating value;

VL06I Inbound delivery monitor not showing correct results

Dears,
We are creating inbound deliveries on the basis of POs and creating GR via MIGO after eliminating movement type in line item catageory by using SPRO. For monitoring we would like to use VL06I but its not showing correct results.
Can anyone guid me ?
Regards,
FR

You can list all Inbound Deliveries by selecting "List Inbound Deliveries" Tab in VL06I
May be if you can little elaborate the issue

Query not showing detailed result when run through query Designer or Portal

Hi,
There is one query which not showing detailed result while running through Query Designer or run in Portal.
But strange thing is that it is showing the detailed result when i run it through BeX Analyzer.
While all the other queries don't have this problem in system. All showing the correct detailed result.
If anyone have some idea on this issue plz let me know.
Regards,
Javed
Edited by: Javed Akhtar on Jul 7, 2009 3:59 PM

Hi,
We can do this setting in WAD. Please check the web template and try to remove that setting. When you have hierarchy then we can display only till certain level in portal, this setting is done in web template APIs, but in bex analyzer you can see all the detailed information.
Edited
Go through this thread for some more detailed information
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Regards,
rik

Spotlight is not showing any results!

I just upgraded to Leopard and now my spotlight app will not show any results when typed upon. I have tried to re-index the volume through system pref. but it didnt work. Anyone know any other methods to get it back into shape? thanks

enter the following terminal commands form an admin account:
sudo mdutil -i off /
sudo mdutil -E /
sudo mdutil -i on /
please copy and paste them exactly as given. you'll have to enter your admin password (which you won't see) after the first command. that's normal.
the commands turn spotlight off, delete the index and turn it back on.

QUnit not showing any results - VisualStudio 2013

In Mircrosofs book:
"Programming in HTML5 with JavaScript and CSS3" there is testing with QUnit.
Have done exactly as the book describes with in an example with an webcalculator in excersise 3.
But when I run the debugging with QUnit does not show any results.
It does not matter if I program an
error..nothing is displayed when I´m start debugging.
Only a blue line with the following:
Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/39.0.2171.95 Safari/537.36
My question:
How do I make QUnit to show something?
I really appreciate your answer
:0)

Hello,
Please post your question in ASP.NET forums here:
http://forums.asp.net/
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Not showing any results V_V2 resheduling sales and stock transfer documents

My client using IS Retail . First i create sales order i want resheduling perticular order through V_V2 i enter article and site ,process sales documents,process stock transfer order,unconfirm quantity and leave simulation but it does not showing any results...previous showing from 2008 to 2010 sales orders only....
Please give answer i am waiting your reply...
Edited by: amitp2121 on Mar 3, 2011 11:57 AM

Hi Hweiling,
In my opinion V_V1 used to create confirmed backorder (line item where confirm quantity in first schedule line is 0 and there is no second schedule line) .
V_V2 is used when you want to alocate your stock based of priority or some criteria.
For example you have order 1 that created on 07.2007 confirmed but you hasn't delivered yet, then you have order 2 that created on 08.2007 it's not confirmed, and you have the other order 3 that create on 01.2008 and it's confirmed ready to deliver 03.01.2008. You can use V_V2 to alocate the stock to first order, 2nd order and third order. So you can deliver the first order first, 2nd order and then the 3rd order will be in backorder.
If you run V_V1, it's only update the stock for second item (if stock is enough).
If you think why it's not update the order that you want when you run V_V2, please check the criteria and the stock.
Guys please correct me if I am wrong.
tsalasi

Apple mail not showing all the messages?

In Apple mail, for my icloud account, I have some mailboxes which show the wrong number of messages, it shows too few.
As an example, a mailbox contains 150 messages, but apple mail reports there are only 146.
I rebuilt the mailbox and let apple mail do its thing. In the activity window I can see there are 150 messages. Yet, once apple mail has finished rebuilding the mailbox, it still tells me there are 146 messages. What's going wrong? Why would apple mail not show all the messages while in the activity window it clearly shows it knows there are 150?

Solved!
This was too weird to be real. Apple mail does not show messages it believes to be duplicates, and buy, does it make big mistakes in deciding what are duplicate messages and what not! Some of my mailboxes had over 100 "duplicates" not showing according to apple mail.
I found a solution thanks to this topic:
https://discussions.apple.com/message/18265121#18265121
defaults delete com.apple.mail AlwaysShowDuplicates
does yield an error in 10.8.2 ( Domain (com.apple.mail) not found. Defaults have not been changed. )
defaults write com.apple.mail AlwaysShowDuplicates -bool true
Does work brilliantly though!

Netflix on Apple TV not showing search results

Similar Messages

Maybe you are looking for