Netflix prompting for userid and password - constantly!

Hello,
First some background. I do not have apple tv powered or my wifi powered all the time. When I want to use apple tv I power it up as well as my wifi. My Netflix userid and password was stored in the app and I never got prompted for it. As of last week, I noticed the Netflix app propmpts me for my userid and password. When I left my apple tv and wifi powered up all day and then went back to netflix, no userid and password prompt. Why did they change this? Over the last few days, I am still be prompted for my userid and password. (I use DSL).
Thanks,
Charlie

Why did they change this? Over the last few days, I am still be prompted for my userid and password.
THEY did not change anything. You have been getting lucky. Contantly restarting ATV and your router can, and usaully will change your IP. When that happens you will have to re-authenticate.
The other response is correct. This is a problme by design. Networks are not supposed to be powered down every time you stop using them.

Similar Messages

SSO Configuration not working - Still asking for Userid and password

Hi Guys,
I have configured Portal to use with backend server. Configured WAS & ITS and created System Alias.
For Testing SSO I did following steps on portal:
System Administration > Support > SAP Appliction > SAP Transaction
Selected system Alias and tcode se12. Selected SAPGUI for HTML. Pressed Go.
Instead of SE12 screen, I get Logon Screen asking for USERID and password.
I should be getting SE12 screen directly without entering USERID and PASSWORD.
I tested with Transaction iView (SE12) and getting the same logon screen. After entering userid/password it displays SAP Easy Access menu instead of displaying SE12
Please help.
Thanks a lot.
mini

Hi Sandeep.
Thanks for your reply. Here are the answers to your questions:
1. Is the username same in the portal and the backend that you are trying to connect, ensure that there is the same username that exists in the system you want to connect to. YES
2. The ticket is imported properly- check the ACL and Certificate list in Tcode STRUSTSSO2.
Ticket is valid from 01 Jan 2009 to 14 Mar 2012.
3. Check for the parameters in place login_accept_ticket = 1 and login_create_ticket = 2 and icm_hostname_full is set to FQDN.
In RZ10 it has 3 parameters:
login/accept_sso2_ticket = 1
login/create_sso2_ticket = 2
icm/host_name_full = sapecc6.tri.com
4. What is the result when you test the system connection?
WAS & ITS Connections are successful.
Connection test for Connectors is giving following results:
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
My Connectors Details:
Application Host : sapecc6
Gateway Host : sapecc6.tri.com
Gateway Host : 3301
SAP Client : 800
SAP Client : EC7
SAP System Number : 01
Server Port: 3201
System Type: SAP_R3
I am using same userid for Portal and backend.
5. Are the 2 systems that you want to configure SSO in the same domain?
I am trying to connect R3 to Portal.
Please give me directions to fix the problem.

Micrsoft Outlook somtimes prompting for username and password

hello All ,
I Have Exchange 2010 sp3 installed two mailbox servers & two HUB & CAS Servers and Outlook sometimes prompting for username and password .
how can fix it .
Thank you

Hi,
Please check the following points:
1. Does the issue happen to your external users or internal users?
2. For all users or some specific users?
If the issue happens to internal users, please configure the authentication in Outlook Security tab with Negotiate Authentication to have a try.
Thanks,
Winnie Liang
TechNet Community Support

Network printers prompting for username and password

With the more recent OS upgrades I can now see my printers on my home network. Very cool. When I select one to print, I am prompted for a username and password. I have tried my network keys with no luck and cannot set a password on my printers. Is this unusual and if not, what should I be using?

You can try to take a fiddler trace in both scenarios and then search for the differences. This issue seems to be related with your network configuration that with the product itself.
In fiddler you can identify what verb is requesting for credentials and from there you can go further with troubleshooting.
You can check also this article
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/users-are-prompted-for-username-and-password-when-opening-an-office-file-from-a-web-server.aspx
MCITP|MCTS SharePoint| SharePoint Performance blog

Lync keeps prompting for username and password.

Hi All,
Lync 2013 prompt for username and password. The request for username and password happens intermittently.
Appreciate any help.
Thanks
denciod

This kb is helpful to troubleshoot this issue:
https://support.microsoft.com/en-us/kb/2298541
There are solutions for Lync users and Lync administrators, choose the method depending on your role.
-Jeff

Prompting for username and password for opening

Hi,
The domain of my organisation is xyz.com. So when try to access any office doc from the office network it opens the office docs without any prompt in office client. But whenever try to access them using VPN or citrix it asks for the username and password.
Then if I give credentials or cancel it irrespective of that it opens the doc for me.
The sites are in trusted zone. It is happening for 2010 and 2013 both. But for pdf it is not prompting.
Why it is asking for credentials and how to mitigate this so that it opens directly from everywhere.

You can try to take a fiddler trace in both scenarios and then search for the differences. This issue seems to be related with your network configuration that with the product itself.
In fiddler you can identify what verb is requesting for credentials and from there you can go further with troubleshooting.
You can check also this article
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/users-are-prompted-for-username-and-password-when-opening-an-office-file-from-a-web-server.aspx
MCITP|MCTS SharePoint| SharePoint Performance blog

Outlook 2013 on Windows 8.1 keeps prompting for username and password.

Hi,
I have a HP Pavillion TouchSmart laptop with MS Windows 8.1 OS. I had installed MS Outlook 2013 Standard. This laptop is joined to the domain like many of my users, however, it keeps prompting for username and password. The emails are still able to send
and receive without any problem.
I have tried to check the connectivity, both cables and wireless are well connected.
I have tried to reinstall the Outlook 2013, but it still occurs.
Attempted to recreate profile but it still occurs.
For the configuration:
I have selected negotiate authentication, and have unchecked the box that states
"Always prompt for login credentials"
Please advise.
Thank you.

Hi,
We can also follow this forum FAQ to troubleshoot this problem:
Why does Outlook keep prompting for password
http://social.technet.microsoft.com/Forums/en-US/bcd2d9c2-1a1b-4446-bf32-69fee8cdf11b/why-does-outlook-keep-prompting-for-password?forum=outlook
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Word 2010 prompts for username and password when opening a document on trusted website

Hi Guys,
We have a website (not sure if the site is a sharepoint site) on our trusted domain that asked for username and password when trying to access it. I added the site to our trusted sites zone and this resolved the issue however when I try to open word documents
I get prompted for usernames and password again if I cancel the credentials box the document opens with no issues.
Below is some of the steps i have taken
- Tried opening other non office documents (e.g. PDF, JPEG) and they open with no issues
- Tried to opening the word documents with a system that only had word pad install and not Office 2010 and the documents open with no issues so it looks like it's an office 2010 problem
Can you please advise how I can resolve this issue and if this is a client issue or an issue on the web server thanks

Hi,
This issue is caused by the Office suit itself. When Internet Explorer opens an Office document, the appropriate Office application is started with the path of the document. The Office application then tries to access the document directly from
the server. This differs from other browsers and other file types. Most browsers download the file and call the application to open the file from the local cache. However, when this occurs, if the opened file is changed and saved,
the changes are only made to the local copy and not to the server copy.
To establish the richest experience possible, the first thing that the Office application does is communicate with the server to determine the server type and what web authoring protocol is available. The application does this by making
an OPTIONS request directly to the server.
As a new process accessing the server, the Office application is required to renegotiate authentication. This method is more secure than a method in which the new process uses an existing authentication that was established by the browser.
Please try the following methods:
An alternative with full functionality but with a calculated risk
Client approaches that can reduce the impact
Alternative configurations when the web server does not support DAV or reduced functionality is acceptable
For more detail information, please refer to the following link:
http://support.microsoft.com/kb/2019105/en-us
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Users prompted for username and password after sharing removed from servers

Hello Community
    On Sharepoint 2010 Server using the UI in a 2 server farm with an intranet running on it and everything functions as it should. However it was noticed that from a users computer when in "Windows Explorer" if "Network"
is clicked the 2 servers are visible.
    The problem is that when the server are clicked on in Windows Explorer the files and folders on the hard drive of the servers are visible too.
    Subsequently I logged onto the server and when into "Properties' - "Sharing" and
unchecked the checkbox to "Share this folder".
    That solved the problem of the users being able to see and access the files
and folders on servers hard drives but now when the users log onto the intranet
they are prompted for a user name and password and even when they provide the user
name and password and the page is returned the prompt appears on the screen again(then they cancel out).
    What can be done about the user being prompted for username and password without sharing the drives on the servers ?
    Thank you
    Shabeaut

What exactly was shared out from the SharePoint server's file system? There are certain things that are shared by default.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Prompt for username and password when executing servlet

In Weblogic 5.1 when I set the username and password in weblogic.properties file, it prompts for the usertname and password when I execute the gatewayServlet
weblogic.allow.execute.weblogic.servlet.servlets/gateway.administration=vijay
weblogic.password.vijay=password
But I guess this is not the way it can be implemented in 8.1. Please let me know how I can prompt for username and password when executing the servlet. I dont want it to be done programatically. Please let me know whether I can set anything on the properties file.
Thanks
Vijay Subramanian

You can use Apache ACLs, http://httpd.apache.org/docs/1.3/howto/auth.html
GoodEvening!
I'm developing a web application using jsp
technology.
When the user digit:
http://<machine address>:<port>/<applicationName>
I would that a browser prompt login is diplayed to
the user for enter him username and password,
before loading the index.jsp page. Is possible
without using awt or swing components?! using only
the browser's prompt dialog?!
p.s.
sorry 4 my bad english! ;-)

How to make dyn/admin not to prompt for username and password?

Hello all
How to make dyn/admin not to prompt for username and password? I am writing a selenium job to automate cache invalidation to load test a production issue we are facing. Selenium is opening a fresh firefox session and prompting for username and password every time. I am also trying to modify my script such that it will use the same session again and not prompt for username and password. But I thought of asking this question in the group.
Your inputs will help a lot.
Thanks,
Sundar

Hi,
You can set enabled property of /atg/dynamo/servlet/adminpipeline/AuthenticationServlet/ to false. It will not prompt for authentication.
Gopi

Outlook 2013 - Exchange 2013 - Prompts for username and password when EWS basic authentication is enabled

So we have an Exchange 2013 environment, and a CRM solution that requires basic authentication to EWS internally. Problem is, after a reboot of our Exchange server, all of our Outlook clients begin prompting for username and password (which nothing
works) which also starts locking users AD accounts out due to failed login attempts (somehow). If I disabled basic authentication on EWS, Outlook authenticates as normal using NTLM and there are no issues. Once Outlook has authenticated, I can
turn back on basic authentication, and Outlook will be fine until the next time the Exchange server is rebooted.
Any ideas?

Hi,
According to your description, I understand that Outlook client prompted for username and password when Exchange server restart and basic authentication is enabled for EWS.
If I misunderstand your concern, please do not hesitate to let me know.
It’s normal. This caused by the difference between basic authentication and NTML authentication:
Basic, with any version of Outlook prior to 2010, results in a pop up dialog asking for creds. Outlook 2010 makes the 'save this password' actually work, so in an Outlook 2010 or later world, Basic can mean no need to authenticate every time you open/reconnect,
but in all earlier versions, you will have to enter creds every time.
NTLM, when used by a client that is domain joined and logged in with cached creds, results in the client simply sending the cached in creds to the server, resulting in what looks like a pretty seamless single sign on experience. However, if you want to do pre-authentication
at something like TMG, and not let the traffic go all the way to CAS, you need to configure TMG for this.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Connect To Server Hangs Before Prompting For Name And Password

Hi Everyone.
Connect to Server hangs for 25 seconds before prompting for name and password.
I am trying to access a share on a Windows 2008 R2 domain controller via a Mac running 10.6.8 (Snow Leopard) using SMB.
Example: smb://192.168.101.11/sharename
Once connected, browsing is fine - it's just the connecting that takes a long time.
I have specified port 139 and login name, I have disabled IP6 on the Mac, the Mac and Windows 2008 server are on the same LAN and are wired.
Again, once connected, browsing is fine - it's just the connecting that takes a long time.
Any help would be appreciated.
Damian

Something to add ...
Connecting to a Windows 2008 stand-alone server outside of the domain (e.g., workgroup) does not have the same problem - the name and password prompt shows immediately.

Browser prompting for username and password to access enterprise manager.

I've just installed Internet Directory 10.1.4.0.1 and am having trouble connecting to Application Server Console in Enterprise Manager.
When I try to go to the url http://localhost:18101, a dialog pops up asking for a username and password. In firefox it says 'Enter username and password for "enterprise-manager" at http://localhost:18101'. IE6 just says, 'enterprise-manager'. I have tried various sets of credentials for this - my network userid and password; and ias_admin, orcladmin, sys and sysman, all with the passwords I specified at install time. None of these work. If I cancel the dialog box I get a '401 Unauthorised' page. I'm sure this is coming from apache and is basic web page authentication, and not an enterprise manager login.
Has any one seen this before?
I can connect through directory manager, and I can connect to the database console for the metadata repository.
emctl status iasconsole shows that it is running.
Windows XP Pro SP2 standalone (ie not part of a windows domain)

trying to access my college intranet form home
Contact your college network support. The syntax for specifying your authentication may be different than you usually use when you are just connecting there locally.
Robert Aldwinckle

How to avoid prompting the userid and password in Drop Down Menu

Hey Guys hope you can help me.
I have created a page wherein within that page I have a drop down menu using a javascript here is the code (please see my code below): Now the problem is each time I click any of the selection below the useid and password prompt me.
Is their any way that this can be fixed so that I cann pass the userid and password as a parameter? I have already tried to pass the &SESSION but it does not work.
Please enlighten me on this one....
Thanks,
Henry
<select name="P300_selected_alert" size="1" onChange="bringMeHere(this.options[selectedIndex].value)">
<option value="" selected>-Select One-</option>-->
<option value="All Alerts">All Alerts</option>
     <option value="Acknowledged">Acknowledged</option>
<option value="Unacknowledge">Unacknowledge</option>
<option value="Acknowledged-Resolved">Acknowledged-Resolved</option>
     <option value="Acknowledged-Unresolve">Acknowledged-Unresolve</option>
<option value="Target Name">Target Name</option>
     </select></td>
</td>
<script language="JavaScript1.1" type="text/javascript">
function bringMeHere(a)
if (a == "Acknowledged")
location.href="f?p=103:295:12375097291676676231:NO::";
else
location.href="f?p=103:300:12375097291676676231:NO::";
</script>
---------------------------------------------------

Henry,
See the change I made to your reports region template on page 1, adding the session id to the links as was suggested earlier:
var Session_Id = html_GetElement('pInstance').value;
if (a == "Name")
location.href="f?p=35225:3:"+Session_Id;
else if (a == "Employee")
location.href="f?p=35225:2:"+Session_Id;
else
location.href="f?p=35225:1:"+Session_Id;
And again, you do not want to be hard-coding the application ID anywhere in your code.
Scott

Netflix prompting for userid and password - constantly!

Similar Messages

Maybe you are looking for