Netflix Silverlight 2103 error after Firefox 3.6.15 upgrade, but IE remains fine, reinstall of Silverlight made no difference

Within the last week, Firefox automatically upgraded itself to v. 3.6.15. Netflix started reporting a Silverlight 2103 error. I followed the Netflix instructions to uninstall Silverlight, then let Netflix reinstall Silverlight, which it did according to the Netflix instructions. MSIE continues to be able to play Netflix instant-view movies, even after the uninstall/reinstall of Silverlight.
Did something break as of 3.6.15?
Netflix reports that this particular combo is not a known issue and they have opened a case based on my report. I wonder if other users are silently switching to a different browser without reporting it...?
Thanks for any ideas or solutions.

The Netflix supervisor I spoke to today finally confirmed that it is a known condition. But he said Netflix can't contact Mozilla, only Microsoft since Silverlight is Microsoft's product (even though it seems to be a Firefox change at issue, not Silverlight breakage).
The suggestion from Netflix is to switch to an earlier (and less secure) version of Firefox, or change browsers entirely to MSIE or Chrome. Please someone on the Firefox dev team check into this so Firefox doesn't lose market share to other browsers over this.

Similar Messages

  • Netflix plug in error after lion install

    What is the fix for Netflix plug in error after lion install?

    I reinstalled the plugin from a Netflix email, still get this problem:
    I don't have private browsing on, by the way.

  • Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods.  I have reset the classic several times and same issue happens, any ideas?

    Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods.  I have reset the classic several times and same issue happens, any ideas?

    I have that exact same problem! It plays albums fine. But individual songs including ones downloaded from iTunes either skip or play the music of another totally different song. All play fine on iTunes and my iPhone... Got this one to replace my dying 5th gen classic.
    I hope there is a fix for this, cause it *****!!!!

  • Error after update installation Method Method 'Upgrade' in type ...

    Hi guys after the install of some upgrade i can t access to my SharePoint site and i recive this error
    Method 'Upgrade' in type
    'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy' from
    assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0,
    Culture=neutral, PublicKeyToken=71e9bce111e9429c' does not have an
    implementation.
    Any idea?

    Microsoft has started pushing security updates for SharePoint along with windows update. If you are using automated patching tool , then you should be aware of this. Same thing happened to me. Our automated tool pushed through patches for share point security
    update that needed SP1 as pre-requisite and our environment didnt have that. So it broke everything in all farms, 5 farms broken all together. What you can do is try to install any new security update . This will restart all the process of patching and make
    your farm accessible. 
    I opened up a support ticket with microsoft so August security update broke my farm so just to fix it i had to install may security update for the shake of restarting the  whole prcoess. If fixed the farm. I eventually ended up installing SP1 any way
    since security update introduces office 365 tab in central admin and it was broken due to lack of SP1.
    hope this helps. 
    sachin

  • Pacman will not work after upgrade, but webbrowsing works fine

    As topic stated. sudo pacman -Syu gives:
    :: Synchronizing package databases...
    error: failed retrieving file 'core.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
    error: failed retrieving file 'core.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
    error: failed retrieving file 'core.db.tar.gz' from jane.tihlde.org : Transient resolver failure
    error: failed retrieving file 'core.db.tar.gz' from jane.tihlde.org : Transient resolver failure
    error: failed to update core (Transient resolver failure)
    error: failed retrieving file 'extra.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
    error: failed retrieving file 'extra.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
    error: failed retrieving file 'extra.db.tar.gz' from jane.tihlde.org : Transient resolver failure
    error: failed retrieving file 'extra.db.tar.gz' from jane.tihlde.org : Transient resolver failure
    error: failed to update extra (Transient resolver failure)
    error: failed retrieving file 'community.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
    error: failed retrieving file 'community.db.tar.gz' from mirror.archlinux.no : Transient resolver failure
    error: failed retrieving file 'community.db.tar.gz' from jane.tihlde.org : Transient resolver failure
    error: failed retrieving file 'community.db.tar.gz' from jane.tihlde.org : Transient resolver failure
    error: failed to update community (Transient resolver failure)
    error: failed to synchronize any databases
    Yet internet in general works fine. This happened after an upgrade, but I can't remember what was updated because I went on a holliday right after the update. I have a kernel oss linkage error at boot, but don't know if this has anything to do with it. Is there any thing I could paste to help solve the matter?

    Session wrote:
    The new module-init-tools 3.8 package changes the location of the configuration file: /etc/modprobe.conf is no longer read, instead /etc/modprobe.d/modprobe.conf is used. Files in /etc/modprobe.d without a .conf suffix will be ignored in the future.
    Please adjust your local configuration files after the update.
    The way I read this is that I can delete /etc/modprobe.conf and all files/folders in /etc/modprobe.d that does not contain .conf suffix?
    Not quite, if you have anything in /etc/modprobe.conf you still want to be read it should be moved into /etc/modprobe.d/modprobe.conf, and anything that's already in modprobe.d/ should get renamed so it's called *.conf

  • Failed to execute default file manager (input/output error) After Firefox Reset? [Any more help? you guys/gals rule!]

    after resetting firefox it seems I cant open anything from the menu as i get the above error msg.

    Are you using ubuntu? [http://askubuntu.com/questions/42682/failed-to-execute-default-file-manager-input-output-error]

  • 400 bad request error after Firefox 4.0.1 update

    After the latest Firefox update, the browser no longer works. When I try to go to a web site, Firefox sends the URL incorrectly by repeating the url. For example: if I type the url http://my.yahoo.com/, I get the following error:
    400 Bad Request
    Your browser sent a request that this server could not understand:
    my.yahoo.comhttp://my.yahoo.com/ (port 80)

    Thank you again for your help. After clearing the cache and cookies, and still having the problem, I uninstalled/reinstalled firefox. I had tried this before, but allowed it to keep my bookmarks, etc.. This time I had it remove everything (this is a check-box when doing the uninstall).
    After reinstalling Firefox this time, the problem went away. Thank you for your help. Your comment about the cache and cookies, made me think that removing all information during the uninstall would help, and it did.
    I don't know if your second suggestion would have helped, because it is now fixed.
    But I believe it was a possibility.

  • Can't connect to Netflix: Sudden HDCP error after software update

    I have been unable to connect to Netflix after I updated the apple tv software. I have tried the suggested remedies: unplug/replug HDMI cables; swap out HDMI cables; turn apple tv and tv on and off; reset; among others...Worked fine with my TV until the update. What the deuce? Can anyone help?

    I am using the same Sharp Aquos LCD TV set and same ATV With the same apple HDMI cable that I have been using for years with sleek functionality and great enjoyment ....
    There are two factors though - to consider -
    1) the remote has been somewhat sluggish lately
    2) The day before all of this happened I had removed the HDMI CABLE From my TV in order to put the Hdmi adaptor that connects through the mini DVI ( I think that is how it is called ) to my 2008 White MacBook. I wanted to watch a French Region DVD.
    To my surprise , it did not work , but I thought that maybe the cable has suffered damage and I haven't used it for a long time.
    I wonder if the connection in my TV is at fault. that can be checked tonight on another TV.
    If that does not work I'll change the battery in the remote
    And if none of this works , I'll buy another ATV.
    Any success will be posted. but I have a nagging feeling now that my TV might be the cause of all this trouble.

  • Kernel Power error after Win 7 and RAM upgrade

    Hello,
    I posted earlier on the subject of win7 and ram upgrades.  I did both and it seemed to go fine.  I did the ram first ... replaced a 667Mhz 1gb with a 800Mhz 2gb.  A couple of days later the computer just shut itself down and restarted.  Since then it has done it another 5 times, seemingly at random.  Yesterday I decided to spend some time looking into it and found the 'event log'.  All the shutdowns are recorded as 'critical'.  A search on the web/here showed other occurences of the fault associated with drivers as much as anything.
    After I did the win update I did update almost every driver with ones from this site.
    Other than the shutdowns the only issues I have which are of very mild concern are the length of time the fingerprint reader takes to be present and that occasionally the cursor is unavailable for about a minute after logging on. When you try and control it it jumps about anywhere but where you want it to go.   I rolled back the alps driver and that seems to have sorted the cursor issue.
    So, details of the shutdown from the event log are as follows.
    Log Name:      System
    Source:        Microsoft-Windows-Kernel-Power
    Date:          16/01/2011 16:21:31
    Event ID:      41
    Task Category: (63)
    Level:         Critical
    Keywords:      (2)
    User:          SYSTEM
    Computer:      (removed by me)
    Description:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
    There's more (I've shown it all below) but it's not that important.  When I looked into it I found details of the problem on the microsoft knowledge base.  Its described here http://support.microsoft.com/kb/2028504.
    I believe I fit into scenario 3 for cause and resolution.
    So, it seems that win7 and mixed speed ram may be a problem on some computers ... probably only a tiny number, but it looks like the HP3507 is one of them.  I did see somewhere that I could down speed from 667 to 266 which might help with memory compatability but I can't see anywhere on the the insydeH20 bios where to do it.  BIOS is version F18 .... upgraded from F15 as part of the Win7/RAM ugrade.  
    Before I swap back to the 'old' memory I'll see if anybody here can come up with any ideas.  It may be that I have to sell off the expensive 2gb memory (ddr2 800mhz 200 pin) for £39.99 from maplin at a bargain price and get 2gb of 667Mhz from somewhere.
    The full 'detail' regarding the fault is below.
    Bye for now.
    Phil
    Log Name:      SystemSource:        Microsoft-Windows-Kernel-Power
    Date:          16/01/2011 16:21:31
    Event ID:      41
    Task Category: (63)
    Level:         Critical
    Keywords:      (2)
    User:          SYSTEM
    Computer:      (removed by me)
    Description:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
        <EventID>41</EventID>
        <Version>2</Version>
        <Level>1</Level>
        <Task>63</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000002</Keywords>
        <TimeCreated SystemTime="2011-01-16T16:21:31.187617000Z" />
        <EventRecordID>194889</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="8" />
        <Channel>System</Channel>
        <Computer>Home_Laptop</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="BugcheckCode">0</Data>
        <Data Name="BugcheckParameter1">0x0</Data>
        <Data Name="BugcheckParameter2">0x0</Data>
        <Data Name="BugcheckParameter3">0x0</Data>
        <Data Name="BugcheckParameter4">0x0</Data>
        <Data Name="SleepInProgress">false</Data>
        <Data Name="PowerButtonTimestamp">0</Data>
      </EventData>
    </Event>

    Hi DWeiland and Schwede,
    Thanks for your replies. Yes I did the runtime engine registry change and also mass compiled the LV7.1 folder and my sourcecode. I still see the problem as I have set the LV adapter as Lv 7.1.1 runtime engine. Now I have changed it to LV7.1 development system. With this setting, it is not giving any error. Thus I don’t see any problem now. The older version of the code had the adapter as the runtime engine for some reason, now I have changed the setting to the development system. I hope that it shouldn’t be a problem.
    Thanks again!
    Thank you,
    Sasi

  • No Hulu after firefox 3.6.8 upgrade, flash version 10.1 (RESOLVED)

    Automatically Upgraded firefox to 3.6.8 now my Hulu does not play at all
    Adobe flash is latest version 10.1
    The videos are introduced but the they fail to play.
    Hulu works fine in explorer and chrome.
    Also hulu works fine on my laptop that is using an older version of firefox.
    What did you change firefox?
    I need to know so that i can fix the problem you guys caused!

    I had this problem also with ALL flash content (e.g. http://www.adobe.com/software/flash/about/) after upgrade to Mozilla 3.6.8.
    As the previous post suggested, I disabled all Add-Ons (except Flash player) and it worked OK. I re-enabled all the Add-Ons again one-by-one and it is still working fine.

  • -18002 error after Labview 7.1.1 upgrade

    Hi All,
    It seems like LV 7.1.1 upgrade is very dangerous when you use with Teststand. The existing system runs fine with LV 7.0 and TS 3.1. Now we have upgraded to LV 7.1.1. The LabVIEW adapter was set as LV 7.0 runtime engine previously. Now I could see only LV 7.0 and LV 7.1 even after I upgraded to LV 7.1.1. I have mass compiled my source code folder and also LV 7.1 folder. But I couldn’t see LV 7.1.1 listed in the runtime engine adapter list.
    I could see some support link which explains about the registry changes (copying LV 7.1 (runtime) key to LV 7.1.1 (runtime)).  After doing so, I could see LV 7.1.1 in the adapter list. But then it is of No use. As even if I select the LV 7.1.1 runtime engine as my adapter, it changes back to LV 7.1 run time engine (when I check the adapter option again). It gives error when we run with LV 7.1 runtime engine.
    I have attached the sample error message! 
    Thank you,
    Sasi

    Hi DWeiland and Schwede,
    Thanks for your replies. Yes I did the runtime engine registry change and also mass compiled the LV7.1 folder and my sourcecode. I still see the problem as I have set the LV adapter as Lv 7.1.1 runtime engine. Now I have changed it to LV7.1 development system. With this setting, it is not giving any error. Thus I don’t see any problem now. The older version of the code had the adapter as the runtime engine for some reason, now I have changed the setting to the development system. I hope that it shouldn’t be a problem.
    Thanks again!
    Thank you,
    Sasi

  • BPM error after PI 7.31 SP12 upgrade

    We have a bpm scenario where we send a request to a web server and it sends a response message if successful request is sucessfuly processed (synchronous) or else sends us a fault message saying the server is busy at that time.
    Now this scenario was working fine before the upgarde, however in the upgarded environment we get an error message:

    Opened message with SAP.
    SAP's response:
    Thanks for XPI inspector traces. We have analyzed and found that
    NPE(NullPointerException) is happening while converting the SOAP fault
    into an Application fault. We have also gone through the
    implementation part. It looks like the variable 'xer' is not properly
    handled. Hence we are planning to fix it. So we will get back to you
    with an update on this soon. Hope this is fine with you.
    Will keep you all posted with SAP's response.
    Thanks.

  • AveConnect driver error after SQL Server service pack upgrade

    I am currently testing aveConnect 3.0 (connection optimized) for SQL Server 2000 on a machine we have here.We updated SQL Server with Service Pack 2 & 3 this morning and since then we've been getting the exception below.This is only since we added the service packs to SQL Server,before it worked fine.
    java.sql.SQLException: [Avenir][JDBC SQL Server Driver] Connection refused: connect
    I also tested it with the older version of AveConnect (2.2) which we've been using until recently,and it returned the same error.
    I am currently testing aveConnect 3.0 for SQL Server 2000 on a machine we have here.We updated SQL Server with Service Pack 2 & 3 this morning and since then we've been getting the exception below.This is only since we added the service packs to SQL Server,before it worked fine.If anyonecould provide any advice I would be very grateful,as this is pretty urgent.

    Hi,
    I just contacted the driver vendor (Atinav Inc).heard that aveconnect jdbc driver is now updated to work with latest SQL server fixes from microsoft.
    FYI, aveconnect jdbc driver link http://www.atinav.com/products/aveconnect/aveconnect.htm
    HTH,
    -ashraff.

  • OJ6110xi cartridge error message keeps me from using menu, but cartridge works fine in printing

    When I power on the 6110xi, I get the message:  Remove and check left cartridge.  I removed both the black and color cartridges and cleaned the contacts both on the cartridges and unit with no change in the situation.  I deleted and re-installed the printer.  Still the same situation.  I can print (in both black and color) and scan fine.  I just can't access the menu.  How can I clear this error message?

    Hard Reset – While printer is powered ON, pull
    the power cord from the printer then from the
    wall. After 30 seconds reconnect power to
    wall and printer. This will trigger a ‘dirty
    power up’ and restore the printer to a known
    good condition (if it is possible). No user
    settings are lost with a ‘hard reset’.
    This ‘Hard Reset’ is one of the most powerful
    tools to use when the printer hardware is not
    functioning properly!
    If not fixed, printhead is defective.replace printhead or if printer is old...replace it.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • Error while running the code using jvm but its working fine with eclipse3.0

    Hi Everyone,
    I have a problem while building xml document.
    I have developed my java files using IBM Eclipse 3.0 and i had no problem while executing the files.
    But while i am trying to execute the same code in jdk/bin, xml document is not working..
    No error encountered while compiling but while executing when i try to print the xml string it just gives the root element name like [root : null]
    Can anyone suggest some solution?Its urgent please....

    since i didnt get any reply when i posted it at http://forum.java.sun.com/thread.jspa?threadID=723865
    i have posted my pbm in the forum.
    Anyways i never got a reply back for neither of my posts.

Maybe you are looking for