Netflix stopped working today 5/27/14

Netflix stopped working on my dinosaur iPad this evening.
Tried all Netflix fixes, spoke to tech support, no help.
App loads to browse screen, then crashes back to iPad home screen.
Was working earlier in the day, and roku was fine up until I switched to another room.
I saw they released a new version today.
Any thoughts?

Hi jmbohio,
If you are having issues with an iPhone that won't boot past the Apple screen and isn't otherwise responding, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden

Similar Messages

  • My iphone 5 speakerphone just stopped working today while on the phone?  whats going on?, My iphone 5 speakerphone just stopped working today while on the phone?  whats going on?

    My iphone 5 speakerphone just stopped working today as i was on the phone.  i have tried to use it, and it doesnt work.  THis really stinks because now im completly unable to video chat and do other things.. please help!!!

    Booked into the Genius Bar at the Apple store in the Manchester Arnedale shopping centre and arrived on time today.
    The staff asked if I had backed it up, which I responded that I had. I also explained that I had been on the forums and followed some of the advice.
    My iphone 5 was only 7 months old and still under warranty, so I should have expected excellent service, and I got it. The phone was repaired by the store and returned to me approximately 30 minutes earlier.
    Happy days.

  • Express stopped working today

    My Express stopped working today. Moved it from a plug where it had been working to another and no I can't see it from my Mac, though I can see it from my Windows laptop as a live wireless connection, it shows up on the PC as Apple Network 5f7ea1, but is absent from my Mac.
    I've reset it, and confirmed it has version 6.1.1 installed (the updater could see it) , but I can't get AirPort admin to see it from either computer. Now it just displays a blinking amber light and doesn't work.

    I've seen references to "Turn it off" before, but the only way to do that is unplug it. Or am I missing something? I've unplugged it a few times to no avail.
    For the record, I'm connecting to this from an Extreme base station.

  • Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?

    There is an explanation in the following link in the section "What's new in version 3.0.09440" that there was a problem with the update. It's available again now. https://itunes.apple.com/us/app/cisco-anyconnect/id392790924?mt=8

  • One usb port stopped working today

    One of my USB ports stopped working today. I think it may be related to Itunes update today. Has anyone else seen this recently? I restarted my computer - but that didn't help. I have a MacBook Pro - running Lion 10.7.5
    Any suggestions? I saw one USB Hub when I went to Apple --> About this Mac, but couldn't tell if both were there.

    http://www.ehow.com/how_7351075_reset-usb-ports-mac-laptops.html

  • Apps stopped working today

    my apps stopped working today. When I click one it shows the loading screen then goes back to the home screen it was on. I also have been able to get the home screen to be stuck between pages often today.
    The only thing I did today was install bubble wrap and play it once then when I went to play pandora for the way to work it started happening.
    Turning off and on didn't fix it. Any ideas?

    Sometimes other apps does not release memory properly. So when you try running another app, iPhone terminates it. For some, turning off the iPhone (pressing the Sleep/Wake button) frees the memory, for some you need to reset the phone (pressing the Sleep/Wake and the Home button for 18 sec). What I do, when I use a lot of apps and after I'm done, I just turn off/on the phone. I also recommend reading the reviews before downloading an app - if there are comments like "it crashes my iPhone" or "It hangs", then I don't download it or wait until the developer fixes the issue.

  • HT201365 i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help

    i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help

    If you are unable to restore your iPhone with iTunes without having to enter the passcode, you will not be able to update your iPhone's backup. You will need to place the iPhone into recovery mode in order to restore the iPhone with iTunes and you can restore from the most recent backup available.
    http://support.apple.com/kb/ht1808

  • NETFLIX STOPS WORKING WITH HDMI ATTACHED TO MY TV

    Everytime I use my Netflix app with a HDMI cord for my TV. It stops working and saying I need to download video drivers to be able to use the service. Where do I find the video driver info on an HP Envy- Tablet and Laptop combo...

    Hello SCB08,
    If you tell us what the full model number of the computer is and what country it was purchased in, we can point you to the correct drivers.
    How Do I Find My Model Number or Product Number? | HP® Support
    Does the HDMI link to your TV work if you just use your browser to view videos or anything else? Or is it just the streaming Apps like Netflix?
    HP may or may not have an update to fix this.

  • The email EDIT button used for marking emails to delete, move or mark just stopped working today.  When I hit EDIT nothing happens.  How do I fix it?

    I need help fixiting the iPad2 email EDIT button used for tagging emails to delete, move, or mark.  Today, it just stopped working and is unresponsive.  The DELETE, MOVE, & MARK icons do not appear and I cannot tag emails.
    How do I fix the problem?

    Restart the device (hold power + home until the Apple logo appears) or just turn it off (hold the power button until the red swip bar appears and swipe) and then back on.
    If that doesn't fix it, you can try a restore from backup or setting it up as new.
    Set up as new: http://support.apple.com/kb/HT4137
    Backup/Restore: http://support.apple.com/kb/HT1414

  • Internal microphone stopped working today - Pavilion G7 - C2M31UA#ABA / Windows 8

    Hey there
    I am using Skype quite often, but today my internal microphone stopped working. I restarted Skype, my laptop and I also followed all steps of you trouble shooting page. No change ...
    Any ideas?
    Thanks
    Bettina
    This question was solved.
    View Solution.

    Enter your device manager.
    Can be found by pressing windowskey + x.
    Press Sound, video and game controllers.
    And right click and remove the one called Realtek high definition (should be something like that). 
    Reboot the computer, this should make it reinstalll the driver på itself.
    If this doesn't work, search for the program called recovery manager. In here you pick the one furthest to the left, called something with reinstall driver. Here you find the one called IDT High-Definition (HD) Audio Driver check it, and press install.
    Since it used to work, and you dont have windows 8.1. If this still doesn't fix it, it must be some setting regarding your microphone. So try right clicking your speaker icon down in the right corner, when in desktop mode and pick recording units (translating directly from danish). Please let me know what you see in here.
    Best regards
    ThaCrash
    Troubleshooting Steps:
    1. Reinstall Adobe Reader.
    2. Turn it off and on.
    3. Press Kudos star.

  • My WRT54GS Stopped Working Today

    I have a wireless-g broadbrand router 2.4 GHZ with SpeedBooster.  Today, it stopped working.  If I connect to my laptop directly to my modem, my internet connection works fine.  But it doesn't do anything when I connect to my router.  I currently can't find my original setup CD.
    I tried a variety of things I seen through out the forum to no avail.
    Firmware: v1.52.2
    ISP:   Comcast Cable
    Internet Type:  Internet Cable
    Router:  WRT54GS v.5
    I tried upgrading the firmware, resetting the MTU, rebooting my laptop, rebooting the router, resetting the router, unpluging the cable, etc to no avail. 

    I also have a WRT54G not with speed boost but version 3.1. My router was working fine yesterday and now it isn't. I've connect via ethernet to the modem and it works fine but when I try to connect either wirelessly or via ethernet to my router it doesn't work. I mean the router works I can access settings and ping other machines on it but when it comes to spanning the WAN it just not there. I've done as the previous mentioned countless times. First thing I did was to reconnect ISP then router still nothing. Not sure what it is or why it would just stop working overnight when everything appeared to be operation just fine beofore.

  • I bought an ipad mini the other day and Siri just stopped working today

    I bought a new ipad mini in store of Thursday and was very pleased. Siri was working all well but then today it just stopped working. It isn't picking up and sounds through the microphone. What should I do?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Netflix stopped working on my smartTV/Blu-ray box NSZ-GT1

    My NSZ-GT1 SmartTV/Blu-Ray player has stopped working with Netflix. Its worked fine for 4 years. Internet works fine. Other Smart TVs in house get Netflix fine {not a network problem}. A friend with the same Sony NSZ-GT1 had same problem but after multiple tries it started working. The Netflix banner page comes up and then says it cant access. I've tried mutiple time and no success. Suppect Netfilx changed something and now my box is not compatable with the change. is there a firmware/patch/update i can load to fix this. software version: 2012091701_WWV_ORSC20120917092811

    same thing happened to me. unplug ur blueray player. Go to you Internet Modem and restart it. Plug ur Blueray back up... and it should work fine.

  • Kanex XD stopped working today.

    Hello,
    I have had a Kanex XD for around 7 months now, and today it has decided to give up on me. The XD just wouldn't find a signal. The blue light next to the Minidisplay port wouldn't light up blue, and the iMac just kept popping out of Target display mode back to the iMac interface. A few hours later I tried and it worked, but then wouldn't work again.
    I've checked that I haven't installed a firmware update that would make the Kanex stop working, so I really dont know what to do. I bought it on Amazon and have tried to return it but it only had a 30-day returns policy!
    Thanks in advance.

    Hi, not familiar with Kanex.... how does it connect?
    Only clue I have is here...
    http://forums.macrumors.com/showthread.php?t=928799

  • My home and lock button had both stopped working today-?

    All of a sudden today my lock button and my home button stopped working. Any way to fix that? I already have the touch dot on my screen but i now have no way to make my screen light up unless i receive a notification/text/call or plug it in...

    You can turn it on by connecting to charging source and you can use Assitive Touch (Settings>General>Accessibility)
    Otherwise, if not covered by warranty
    Apple will exchange your iPod for a refurbished one for t$199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
      Apple - iPod Repair price             
    You can do it at an Apple store by making an appointment:
    Apple Retail Store - Genius Bar
    or send it in to Apple. See:
    Service Answer Center - iPod

Maybe you are looking for

  • Facetime issue - after installing a new logic board due to liquid damage.

    I installed a new logic board this week.. after installing the os x operation system and then upgrading it to mavericks and i used migration assistant to load my backuped user from an external disk. I tried to log in using my apple id ( which is veri

  • Down Payment Processing on the Basis: Document Condition

    Hi all, since Enhancement Pack 2 there is a new possibility of down payment process. The new process is not depending on billing plan instead depending on Document conditions. With this you can also have the the final invoice delivery related. In the

  • HP Pavillion Media Center m8020n audio add in?

    HI, I have a Media Center M8020n... Product #: RX883AA-ABA07010#32#203211022006 running vista. The sound has recently died, and I am trying to figure out what to do with it. I realize it's pretty out of date at this point, but everything still works,

  • Error while running ComponentTool command line

    Hi , I am getting following exception while running command line component tool in linux ./ComponentTool --list csPathUnableToFindParameter(IdcProductName,$IdcResourcesDir/core/config/defaultconfig-$IdcProductName.cfg) Please give some pointer to get

  • AP Isolation not working

    Using a wrt610n.  I am trying to Isolate one of my wireless bands from the rest of the network. I turn on the AP Isolation and I still have access to all of my wired computers.  Questions: Am I doing something wrong? With AP Isolation working will th