Netflix will not stream on apple tv

Netflix will not stream on my apple tv

Unplug the power and disconnect the ethernet cable (if wired) wait about a minute and plug everything back in. Doing this has worked for me in the past. Hopefully that'll help, if not let me know.

Similar Messages

  • TS2972 Itunes Library will not stream to apple TV

    I can find my itunes library on my apple TV, but it will not stream. it just continues to buffer, and does not load the movie. Is there a way to fix this? Everything used to work just fine before today.

    Solution:
    I had the same problem.  Apple TV worked, because I could stream the BBC iplayer from my iPad, it was just iTunes that was the problem.  However, I just downloaded the latest Apple TV update and bingo!

  • ITunes will not stream vidoe audio to Apple Hi-Fi speakers

    Hi - Using iTunes, I am able to stream music and podcast audio to my Apple Hi-Fi speakers via Airport Express. However, VidoeCast, TV Shows and purchased movies will not stream... am I doing something wrong? Is there a workaround?
    hevans

    Try turning IPv6 ON in your network preferences - this is helping SOME people with this problem. It won't help you at all if your network router doesn't do IPv6.
    To turn on: go to Network Preferences, select the interface you use, under teh TCP/IP tab click 'Configure IPv6', and choose 'Automatic'. Save changes.

  • TS3623 Apple TV3 will not stream movies

    My Apple TV3 will not stream movies and it takes a very long time for music to stream from my MacBook. I readjusted the resolution settings and it was the same thing. It gives me an "error occurred loading this content; try again later" message after spending several minutes of buffering after I try to play movies. 
    I have high speed 15 mbps Mediacom internet, which has never had any issues. I called Mediacom and they said my connectivity was excellent. I have reset my router/modem/AppleTV to no avail.  My homesharing is on and I have followed all other recommendations I could find on Apple forums concerning this same issue.
    I am going to return this product for a Roku if I am not offerred a solution on the matter.
    Apple, I hope you realize this is not an isolated incident.

    Annethrax wrote:
    My Apple TV3 will not stream movies
    From where? Internet or local iTunes library?
    Annethrax wrote:
    I have high speed 15 mbps Mediacom internet, which has never had any issues. I called Mediacom and they said my connectivity was excellent. I have reset my router/modem/AppleTV to no avail. 
    Good.
    Annethrax wrote:
    I am going to return this product for a Roku if I am not offerred a solution on the matter.
    Apple, I hope you realize this is not an isolated incident.
    I appreciate your frustration, but remember we are fellow users here, and you are not talkingto Apple support directly.
    If you are connected via wifi try using ethernet if you can to rule out a wifi issue.
    My AppleTVs are very stable with internet or LAN streaming 99% of the time, but since yesterday they have all behaved oddly - weird!
    AC

  • HT204291 Netflix will not work with IOS 7 on my HD TV, The screen comes up but will not play video. It says i need to disable mirroring. I dont have a Apple TV any suggestions?

    Netflix will not work on my HD Tv with the New IOS7. All other and movies clips work fine. The netflix screen says you need to disable mirroring to play. It plays on the ipad but just the Netflix screen on the tv. Any suggestions?

    Hi Everyone,
    hope this message finds you all in time. The recent Apple TV update 5.1 is terrible. Apple knows it is which is why (thankfully for some relentless user -I have no idea who but I believe it was under threat) they have allowed to sign 5.0.2 again which means you can downgrade your Apple TV 2 and 3 to a 5.0.2 version via iTunes. Who knows how long they will keep the window open but I have downgraded my ATV early this morning. I couldn't post this earlier because I was out all day but I am doing it now.
    Here's how to do it:
    1) Connect your ATV to your computer via a Mini USB (not included with ATV but included with many other electronic devices) - in order for your ATV to appear in iTunes you must FIRST plug the USB cable to your computer and ATV and only THEN plug the power cable.
    2) Download your ipsw restore file from Apple.
    5.0.2 (ATV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (ATV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3) In iTunes select yout ATV, hold SHIFT and click on Restore
    4) Find and choose the downloaded IPSW file in the Open Dialog Box and hit Next
    5) As long as Apple still signs that version the Restore process will begin and will take a few minutes to complete.
    Enjoy!
    raadore

  • QuickTime 7.7 for windows vista 64 bit will not stream for me,anyone else having problems?

    I updated to 7.7 quicktime and itunes 10.4.0.80(latest versions) for windows vista 64 bit .It appears to be working for movies I took with my camera no problem and other various tasks but I cannot get it to stream online videos.I did the test http://seminars.apple.com/seminarsonline/wctest/apple/level2/wctest.html on most of these I can hear audio fine but I get no visual.It will not stream from a place it has always streamed from and others at same place say it works fine for them with the new update.I have uninstalled and reinstalled configured the streaming according to apple I have set it to the default player I have dumped cache and still nothing...help!!!

    ok without doing anything the streaming on the test page is suddenly coming up with a different page and the test streaming is working fine but still no streaming  for the other place I always stream from...

  • Will Not Stream

    My Apple TV has been having a very weird problem since I got it a year ago. It works outstanding at my apartment without changing any settings on my router or my computer. It streams, syncs, etc.
    Anytime I move both my Mac Mini (the server) and the AppleTV to my parents house, however, everything gets messed up. It still syncs just fine, but it will not stream. Unless the movie/tv show you are trying to watch is synced to the appletv hard drive, it will just try to buffer and not get anywhere. I have completely turned off the firewall of the router (Belkin N+) and even put the Mac Mini in the DMZ. I don't imagine it is a problem with the Mac Mini, as the whole system works great when I go home. The only change is the router I'm using, and the ISP my parents have.
    Also, the Mac Mini will connect to the internet/get email/surf just fine. The AppleTV Network Test runs successfully.
    Any help would be really great. Thank you!

    It's possible the Mac's firewall is blocking it, since the network address has probably changed with the different router. I don't recommend running without a firewall any longer than it takes to test it, however.
    I know you said the firewall on the router was off, but I suggest assigning a static IP address on the router to the ATV's MAC address and then set up port forwarding to and from the ATV's static address on the necessary ports. If the router is properly configured, it should work.

  • ITunes will not stream audio to AppleTv.

    Since I upgraded to Yosemite iTunes will not stream audio to AppleTv. IPhone and iPad running iOS8 works fine.

    Hey there Klausnorgaard,
    It sounds like AirPlay is not functioning correctly between iTunes on your computer, to your AppleTV but iOS devices work without issue. I would use the troubleshooting in the following article, named:
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Video Audio will not stream via express

    Hi - Using iTunes, I am able to stream music and podcast audio to my Apple Hi-Fi speakers via Airport Express. However, VidoeCast, TV Shows and purchased movies will not stream... am I doing something wrong? Is there a workaround?
    hevans

    Streaming movie audio only is quite different from streaming both audio and video. The problem comes in the prebuffering that's necessary to keep the audio from skipping, which makes the audio lag behind the video. To keep them in sync, the AirTunes protocol would have to be considerably more complex: iTunes would have to be able to advance the video ahead of the audio by a predictable amount to ensure that they don't fall out of sync. I can see Apple's point for not supporting it since the Express is intended as an audio device and was never intended for the audio associated with video.

  • HBO GO will not stream

    MAX GO which seems to be identical to HBO GO works fine, but HBO go will not stream. I get to the play screen. I can see the progress bar at the bottom. I can move the dot on the progress bar. I can hit pause. But when I hit play the screen remains blank, and there is no progress on the proress bar. The identical program on MAX GO works perfectly. My speed, memory and processor are all within requirements. I get the same results on Safari and Mozilla.

    I'd contact them and let them know of your difficulty.  If they want you to use Internet Explorer, don't worry, there are solutions such as this:
    Enabled the Develop menu in Safari, and change the User Agent:
    http://support.apple.com/kb/PH5057
    Or install Explorer with WINE:
    http://www.wikihow.com/Install-Internet-Explorer-on-Mac-Using-WineBottler

  • IMac Duo will not stream Quicktime behind my router.

    Just bought a new iMac Duo it will not stream QT behind my Linksys router. Now I know this is a bug in QT and a port not being open for this new version of QT on the Duo because all other Macs I have work fine.
    If I move the iMac Duo to a DMZ zone it will stream just fine.
    Now what UDP or TCP port range do I need to open for this iMac Duo version of QT 7.0.4 to stream properly ?????
    Thank you for your help.

    Does this affect the system even without the firewall turned on? I don't have the firewall enabled (at least I think it is off - bear with me as this is my first Mac I noticed that neither the HTTP (port 80) nor UDP (port 554) work for my iMac, although my wife's iBook G4 and my other PC, an Athlon64 Windows XP box, play streaming Quicktime flawlessly over HTTP behind my NetGear DSL router. My iMac fails with connection error -5420.
    All things considered, since I am a recent Mac owner (only had the thing for a about a week) and it is my first, I am very happy. I am just a bit disappointed in Apple for a problem like this since media technologies are their bread and butter.
    Any more thoughts are certainly welcome.
    Thanks,
    Joshua
    iMac Core Duo 1.83 GHz 17"   Mac OS X (10.4.4)  

  • I recently backed up my iPad and then I restored it to factory settings. Now, I want to restore it from the back up that I created, but it will not accept my Apple ID password. Is there any way that I can save my data?

    Hi,
    As I have said in the title, I was supposed to do a restore on my iPad for work. I backed up the device and then I restored it to factory settings as I was instructed. Now that all of that is complete, I tried to restore it from the back up point I created and it will not recognize my Apple ID password.  I really hope that I won't lose all of my data, but I don't know what else to do. I have tried entering my password numerous times. I really hope that someone can help me.

    Restoring an iPad from an iTunes-generated backup should not require an Apple ID password.
    Did you encrypt the iPad backup? If so, then trying to restore will require entering the encryption password.

  • IPod Touch 4gen not seen in las test iTunes. Also will not accept my Apple ID pw

    iPod Touch 4gen not seen in las test iTunes. Also will not accept my Apple ID pw

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem
    Where are you entering the Apple ID PW?
    What message do yo get when you try?
    Have you tried resetting the PW?
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

  • Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Hi Tokha,
    If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • My windows PC will not connect with Apple express

    My windows XP PC will not connect to Apple Express.

    Which exact model of AirPort Express do you have? Which wireless security type is it configured for? Does your Windows XP PC support this type? Can the PC connect if you disable wireless security on the AirPort?

Maybe you are looking for

  • GPIB-USB-B device not recognized by Windows XP

    I am using an HP Compaq nx9010 notebook with Windows XP Pro. When I plug in the the GPIB-USB-B, I get an error message telling me that 'The Device has not been Recognized'. I hjave followed all the instructions and have updated the bios and drivers o

  • Question about creating JPEG still from movie clip?

    The aperture help says that a frame will be copied as part of a stack .. But I do not see this to be the case. When I make a frame from a movie, I don't see ANYTHING different in the browser window. Please help!

  • Entering batch addresses in messages in Mail [Yosemite]

    How can I enter a batch of addresses in the bcc camp on an outgoing message in Mail? In Mavericks I used to click the bcc button and the Contacts app would immediately open and after selecting the addresses click on the bcc button and all of them wou

  • GRC_10 Risk Analysis Report

    Hi, i should extend the risk analysis report with more details from diffrent tables, they hold special role details. I havent found an idea how to do this. Could i extend the standard report for risk analysis with more columns? Is there something lik

  • Dispatcher not starting, inconsistencies with database.

    Hi guys,   In my coy a member of staff shutdown the SAP Server abnormally causing inconsistencies in the database. The SAP system runs on an MSSQL database. The next morning the dispatcher was not starting and i checked the database. Apparently, i co