Netflix won't stay in Fullscreen

Hi i need help!
I am so annoyed with silverlight/netflix.
It won't allow me to add netflix as a permission.
It never comes up as an option when it kicks me off of fullscreen after a few minutes.
Is there any way to fix this or am I doomed?
I hear this problem is abound!

Hi all,
I had the same problem that is described here and I found a solution that works for me. I followed the instructions that Rasmus and made modifications that fixed the problem.
First, I actually found the registry key in a different location than He/She described:
HKEY_CURRENT_USER/Software/AppDataLow/Microsoft/SilverLight/Permissions
I already had an entry for http://www.netflix.com:80 with the StayInFullScreenWhenUnfocused key set to 11 (Hex).
I noticed that firefox was just displaying www.netflix.com in the address bar, so on a hunch I tried adding keys for www.netflix.com, www.netflix.com:80, and http://www.netflix.com.I then added the StayInFullScreenWhenUnfocused Dword with a value of 11 (Hex).
This fixed the problem. I am guessing that the actual cause here (at least for me) is that the address that Silverlight is looking at doesn't exactly match the string it had in the registry. To sum up, to fix the issue, do the following:
Open Regedit and go to HKEY_CURRENT_USER/Software/AppDataLow/Microsoft/SilverLight/Permissions.
Add a new key in the under permissions and name it http://www.netflix.com.
Add a new DWORD in that key. Name it StayInFullScreenWhenUnfocused. Set the value to 11 (Hex).
Repeat steps 2 & 3 with keys named http://www.netflix.com:80, www.netflix.com, and www.netflix.com:80.
Restart Silverlight. Full screen should hopefully stay.

Similar Messages

Won't stay in fullscreen mode!!!!

darn it. just updated to 7.2 and now when i try to watch something with my TV as the second screen in fullscreen mode, every time i do something other than that (like try to use safari on the first screen) quicktime drops the playback size to a small window. very annoying. what happened?

no... i have quicktime pro, i use cmd-f to use fullscreen, have it set the second screen, but if QT isn't the foreground application, it resizes the screen.
in other words if QT is playing fullscreen and i cmd-tab to another app, it also resizes. or click on another app's window, QT resizes.
same on both systems.

Highlighting text won't stay on

When I highlight text it often won't stay on, and when it does and I try to move the selection, it just beeps at me and sits there. What's up?

Ok. In System Preferences > General, Apple applies the term “Highlight” instead of “Selection” color.
In Pages v5(.2), I select a passage of text and it reflects my first sentence color setting. You can leave this alone and visit any menu or side panel setting, and the selection in the body text will remain selected. It will remain selected, if you leave the Pages document and click in another application. When you return to this Pages document, click anywhere but the body text to regain document focus. The next click in the body text should be a click/hold/drag on the selection to move it, or a press of the space bar to remove the selected text. This is mouse-based behavior.
If you are using a Trackpad, whether built-in or external, you must be very careful not to brush against it while in your Pages document, or your selection focus will be lost.
I am using the above Pages on OS X 10.9.4 and do not experience a loss of selection, or an inability to drag/move or remove the selection. I have tried with both mouse and Trackpad following the preceding guidelines and cannot reproduce what you have stated.

New Pioneer DVR-110 installed, "patchburned", BUT drive won't stay closed.

Have had some good advice on how to intall a new DVD/CD drive, but after installing a New Pioneer DVR-110 (I thought succesfully) on my G4, and downloading Patchburn for Panther, the DVD drive now won't function as the computer keeps ejecting or opening the drive tray.
After installing the drive, I installed Patchburn, and Toast did recognize the drive. I then tried to verify disc permissions on the computer and it kept getting hung up during repair/verify saying it lost connection with the drive manager. Tried Onyx to repair/verify permissions and it too gets hung up. (Had to force quit)
Any advice on how to get the drawer of the DVD drive to stay closed and what else I need to do to get it working?... Alas I can not even reinstall my original OSX software now as I can't boot from the disc drive since it won't stay closed.
Thanks, Rob
G-4 Quicksilver Mac OS X (10.3.9)

You can verify the closeness by opening the empty drive door with the KB and then hold the door open and close drawer with the KB.

My Itunes will not stay open, I have uninstalled it and reinstalled it and it still won't stay open

My Itunes will not stay open. Everytime I open it it just gives me a wait signal and then closes down on it's own. I have uninstalled it and reinstalled it and it still won't stay open.... what should I do now?

Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

My spooler won't stay running, I can't add printers.

My spooler won't stay running, I can't add printers.
Not able to figure out even after firewall on/off, network on/off and all setting to default...
Regards
Reddy

find some possibility solution for spooler wont start here
https://social.technet.microsoft.com/Forums/en-US/d875ab83-1b17-4a28-8738-e67249a2bdfd/cannot-print-after-update-to-81-printers-gone-print-spooler-keeps-stopping-cannot-add?forum=w8itprohardware
I recommended this step
1. do printer troubleshooting
http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-8&v1h=win8tab3&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
2. Uninstall antivirus using removal tools (Kapersky)
3. Registry trick as
JSB43211 suggested, backup your registry before perform this
1. Open Regedit as Administrator
2. Find the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\ key.
3. If you are on a 64-Bit machine, browse to the "Windows x64" sub-key (else "Windows NT x86")
4. Under the "Print Processors" sub-key DELETE ALL THE SUB-KEYS EXCEPT "winprint" key
5. Start the Print Spooler service.
6. Test to see if you can Add a printer.

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

The battery is fully charged so it is not the problem.
What happens when you use the MagSafe?

My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time.

My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time. Help anyone?

Is there a crash log? If so post the first 100 or so lines o fit
Do you know what the ofending plugin is? and where it came from?
LN

I currently have a DROID RAZR M and I'm 1 year into my 2 year contract. Since the Kitkat update, the phone won't stay charged and it's very buggy. I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s

I currently have a DROID RAZR M and I'm 1 year into my 2 year contract. Since the Kitkat update, the phone won't stay charged and it's very buggy. I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s and keep my same plan but switch to the Edge program. Is this possible? I don't think I should have to pay an early termination fee or anything like that since my phone has become almost unusable. I know under normal circumstances you have to wait 2 yrs to upgrade but due to the update and the poor service I'm now getting I hope Verizon can make an exception. Thank you.

How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...

IPod Nano won't stay mounted

Hi this is my first post and hope someone can help. My problem is that when I attach my nano to my computer it will mount on the desktop, open iTunes check and see that it is update, which it is and then it umounts from the desktop within a few seconds. It remains in the iTunes window so I can access the nano preferences but then when I hit apply it searches for the nano and since it is not on the desktop says it can not find it. The iPod is not in the finder window but shows up in the system profiler as being attached to the USB. I am up to date on iTunes and the nano updater says it is up to date running 2006-06-28. I have tried everything such as restarting, using different USB ports, etc... to no avail. When I run the updater it stays mounted on the desktop but I can not acces the preferences. I really need to change my nano preferences as it will not update my new playlists because prefs, are set to update only the checked ones and I can not changes this and apply it if the nano won't stay mounted. Can anyone help? Much thanks

This happened to me when using iTunes 6. Is that the version you are using? I was never able to find a complete answer to the "Preferences not saved" error or any knowledge base articles with an official explanation. I did however find a workaround in a previous discussion. Connect your iPod and in the short time that it is still visible on the desktop just as iTunes is opening, go to Preferences>iPod and tick "enable disk use". You have to be quick but it can be done. Once it is enabled you will be able to go back and update the preferences such as manual update etc. and and you'll not get the error.
If you are using iTunes 7 try the same technique only tick "enable disk use" in the Summary tab before your iPod unmounts.

I updated my iPhone 5 software and now it won't stay connected to wi-fi

I updated my iPhone 5 software and now it won't stay connected to wi-fi

Icloud uses you Apple ID. It one of the Key feature on the new ATV. Restart the ATV, if that doesn't work unplug it and restart it. It should resolve the issue

I have 2 ipad ist generations. I updated one to OS and now netflix won't play on it but my nonupdated one still plays netflix

I have 2 ipad ist generations. I updated one to OS and now netflix won't play on it but my nonupdated one still plays netflix.

I have the iPad2 with IOS5 and Netflix works fine with the Netflix application - I didn't try from Safari.
It shouldn't behave differently between iPad1 and iPad2.

How can I wipe a drive on an old iMac that won't stay on long enough to complete the task?

How can I wipe a drive on an old iMac that won't stay on long enough to complete the task?

Do you have access to another Mac? If so contact the two via a Firewire cable, boot your problem Mac into Target Disk Mode, Transferring files between two computers using FireWire,, and try to use Disk Utiltiy from the second Mac to reformat and erase your hard drive.

When I boot up my Mac, Messages opens automatically. I quit the app, but it just re-opens itself. It won't stay off!!! I can't figure out what's wrong with it!

For the past few months, my Mac has been acting weird. EVERY time I boot up the computer, Messages opens automaticallly (I am runing OS X 10.8.x). I quit the app, but it just re-opens a few seconds later! It just won't stay off! I've looked it up online and nothing helps. I have no idea what to do!!!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Image Adjustments won't stay on

Hey everybody, I'm Steven! I'm working on a sci-fi mural spacescape for my art class, and I'm having a bit of difficulty in the star scape area. See, whenever I do anything in the "Image > Adjustments" tab at the top of Photoshop, the preview on my page makes it look just how I want it, but after I click OK, or Apply, it either goes right back to how it was before I did the adjustment, or it does it to a degree, it just goes back halfway.
For instance, when I click "add noise", then go to Image > Adjustments > Levels to thin the noise out to resemble stars, as a base layer to my starscape, and get it perfect, with the right amount of contrast and everything, when I click OK, it just goes back to big ugly noise. Now, I've added adjustment layers, but those effect everything under them, and I kind of need this to be specific. I've tried changing my mode to 32, 16 and 8 bit, as well as from RGB to CYMK and others. If anyone could help me out, I'd be really grateful! Thanks!
(P.S. I'm using CS4, if that helps)
Steven.

Well, I did have one file that looked similar to it in the directory I was opening it from, so to be safe, I moved it and tried again, but it didn't work. The thing is, when I do Image > Adjustments, the preview on my actual canvas looks good, but when I click OK to lock it in, it just goes back to the way it was before, or kinda how I wanted it, but only a fraction, like half power. And when I save it, it also won't stay on. It will keep effect if I add an adjustments layer, and give me the desired effect, but it affects all the layers below it, not just the one I want, and it will revert to what it was before the effect if I save it as anything but a .PSD, for instance a .PNG, it will go back to white noise, not stars, just like Image > Adjustments. I did both Save and Save As, but they both had the same outcome. Haha, it seems I've really gotten myself in a pickle. Thanks for helping me out -
-Steven

Netflix won't stay in Fullscreen

Similar Messages

Maybe you are looking for