Netfs causing slow boot, waiting for wifi?
Since adding netfs to the daemons in rc.conf my laptop takes about 30-40secs longer to startup. I realise netfs must be waiting for the network (WiFi) to connect but I have nfsd running as background (@) so I don't know how to fix this.
Actually I don't need the mounted NFS drive from boot so maybe I can run some script from rc.local to start nfs later and mount the drives?
My computer has a static IP setup in network client, could I fix the problem above by "hardwiring" the net config from rc.conf, making the WiFi connect faster?
Last edited by dabbi2000 (2011-11-27 14:10:56)
nfsd is the nfs server - are you sure you need that running on your laptop?
You didn't say which network utility you're using, but afaik all of them have some do-this-after-connecting facility e.g. netcfg has PRE_UP/POST_UP/PRE_DOWN/POST_DOWN - I use that to make sure my nfs shares are mounted/unmounted after/before the network comes up/down.
Similar Messages
-
how do i eliminate talking tom cat when it wont download the 20mb. It sits waiting for WiFi and my Pc to hook up. No wifi hook up at home
So you started downloading it and it won't finish? Hold the home (circle) and lock (top of phone) buttons at the same time untill a power off slider comes up. Turn off your phone and when you turn it back on it will ask you for your password to restart the download. Click cancel and it should cancel the download.
-
My imac now takes more than 1 minute to boot. Most of the time is spent on the gray screen. It used to be under 20 seconds.
I have tried disabling all login items as well as moving launch daemons in /Users/name/Library/LaunchAgents, /Library/LaunchAgents and /Library/LaunchDaemons. This did not help.
I have reset the PRAM and SMC, but no change either.
Finally, I removed all usb cables as well as the ethernet cable to see if this was creating the slow boot time, but again, no significant change in boot time.
I have used onyx to clean all caches, and verified the smart status as well as the structure of the volume. I also repaired permissions and executed maintenance scripts. No change.
I have done a verbose boot, and attached to this message is the generated log file. If anyone could take a look at this and let me know if there is anything wrong, I'd much appreciate it. If there's anything else I can try, do let me know as well.
Thank you.
PMAP: PCID enabled
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
vm_page_bootstrap: 2993651 free pages and 135693 wired pages
kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
zone leak detection enabled
standard timeslicing quantum is 10000 us
standard background quantum is 2500 us
mig_table_max_displ = 74
TSC Deadline Timer supported and enabled
corecrypto kext started!
Running kernel space in FIPS MODE
Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
corecrypto.kext FIPS integrity POST test passed!
corecrypto.kext FIPS AES CBC POST test passed!
corecrypto.kext FIPS TDES CBC POST test passed!
corecrypto.kext FIPS AES ECB AESNI POST test passed!
corecrypto.kext FIPS AES XTS AESNI POST test passed!
corecrypto.kext FIPS SHA POST test passed!
corecrypto.kext FIPS HMAC POST test passed!
corecrypto.kext FIPS ECDSA POST test passed!
corecrypto.kext FIPS DRBG POST test passed!
corecrypto.kext FIPS POST passed!
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [S0 S3 S4 S5]
PFM64 (36 cpu) 0xf80000000, 0x80000000
AppleIntelCPUPowerManagement: Turbo Ratios 1234
AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
[ PCI configuration begin ]
console relocated to 0xfc0010000
PCI configuration changed (bridge=16 device=3 cardbus=0)
[ PCI configuration end, bridges 12 devices 17 ]
mbinit: done [96 MB total pool size, (64/32) split]
Pthread support ABORTS when sync kernel primitives misused
rooting via boot-uuid from /chosen: D1154437-384E-377D-B73C-B36D1F5FFEF2
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
AppleIntelCPUPowerManagementClient: ready
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST32000541AS Media/IOGUIDPartitionScheme/Customer@2
BSD root: disk0s2, major 1, minor 3
FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe918aca; max speed s800.
Kernel is LP64
USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
1.166964: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
1.172754: Atheros: mac 448.3 phy 5.10 radio 0.0
1.173497: Use hw queue 0 for WME_AC_BE traffic
1.174226: Use hw queue 1 for WME_AC_BK traffic
1.174952: Use hw queue 2 for WME_AC_VI traffic
1.175678: Use hw queue 3 for WME_AC_VO traffic
1.176404: Use hw queue 8 for CAB traffic
1.177038: Use hw queue 9 for beacons
1.177707: wlan_vap_create : enter. devhandle=0x47ddf658, opmode=IEEE80211_M_STA, flags=0x1
1.179128: wlan_vap_create : exit. devhandle=0x47ddf658, opmode=IEEE80211_M_STA, flags=0x1.
1.180602: start[1012] sc->sc_inuse_cnt is at offset: 203c, sizeof(_sc->sc_ic) is 25f0
USBMSC Identifier (non-unique): 2008102301130 0x781 0xb7bd 0x1804
Waiting for DSMOS...
macx_swapon SUCCESS
BCM5701Enet: Ethernet address c8:2a:14:28:9d:b1
AirPort_AtherosNewma40: Ethernet address e4:ce:8f:56:8f:98
IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
IO80211Interface::efiNVRAMPublished():
AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff8029be9000
AtherosNewma40P2PInterface::init() <p2p> role 1
Previous Shutdown Cause: 5
IOBluetoothUSBDFU::probe
[IOBluetoothHCIController][start] -- completed
IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
[BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
[IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
[AGPM Controller] build GPUDict by Vendor1002Device6720
DSMOS has arrived
[IOBluetoothHCIController::setConfigState] calling registerService
Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,4de1,0000]
Ethernet [AppleBCM5701Ethernet]: Link down on en0
Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,4de1,0000]
AirPort: Link Down on en1. Reason 1 (Unspecified).
en1::IO80211Interface::postMessage bssid changed
virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
[ffffff8029bd1400][BNBMouseDevice::init][75.15] init is complete
[ffffff8029bd1400][BNBMouseDevice::handleStart][75.15] returning 1
[ffffff802a661c00][AppleMultitouchHIDEventDriver::start] entered
34.450553: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
34.450568: switchVap from 1 to 1
[ffffff802ab2cc00][AppleMultitouchDevice::start] entered
CODE SIGNING: cs_invalid_page(0x1000): p=206[GoogleSoftwareUp] clearing CS_VALID
CODE SIGNING: cs_invalid_page(0x1000): p=274[ksadmin] clearing CS_VALID
utun_ctl_connect: creating interface utun0
CODE SIGNING: cs_invalid_page(0x1000): p=298[ksadmin] clearing CS_VALID
/drv/ HypVtx.c:186 CPU is Intel
/drv/ HypLowCache.c:193 Low cache initialized (106560 kB for 24 VMs on 12288 MB)
/drv/ HypApic.c:211 Host APIC phy 0xFEE00000 lin 0xffffff816f24a000 ver 0x15
/drv/ HypVtd.c:3941 [vtdInit]
/drv/ HypVtd.c:3957 [vtdInit] VTD initialization disabled
/drv/ HypSMBios.c:54 Failed to find SMBios entry point
/drv/ HypModule.c:184 Parallels IPI irq = 0 ipi = 0(0x0)
/drv/ HypModule.c:194 Parallels Hypervisor 7.0.15106.786747 loaded.
/prl_hid/ Parallels HID Helper started.
com.parallels.kext.prlnet 7.0.15106.786747 has started.
com.parallels.kext.vnic 7.0.15106.786747 has started.
Sandbox: sandboxd(338) deny mach-lookup com.apple.coresymbolicationd
com_parallels_kext_prl_vnic: created vnic0
com_parallels_kext_prl_vnic: created vnic1
vnic0: promiscuous mode enable failed
vnic1: promiscuous mode enable failed
/drv/ HypIoctls.c:779 Ioctl VT-d status: 0Sorry for my late reply, I didn't have access to the computer.
I tried a newly created auto-login user account, but it didn't make a difference. The time between restarting and a cold start is also about the same.
Anyway, you were right these messages are also in the console log with timestamps. Found that with a different command.
Here is that new log:
Mar 27 15:30:34 localhost kernel[0]: PMAP: PCID enabled
Mar 27 15:30:34 localhost kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Mar 27 15:30:34 localhost kernel[0]: vm_page_bootstrap: 3029947 free pages and 99397 wired pages
Mar 27 15:30:34 localhost kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
Mar 27 15:30:34 localhost kernel[0]: zone leak detection enabled
Mar 27 15:30:34 localhost kernel[0]: standard timeslicing quantum is 10000 us
Mar 27 15:30:34 localhost kernel[0]: standard background quantum is 2500 us
Mar 27 15:30:34 localhost kernel[0]: mig_table_max_displ = 74
Mar 27 15:30:34 localhost kernel[0]: TSC Deadline Timer supported and enabled
Mar 27 15:30:34 localhost kernel[0]: corecrypto kext started!
Mar 27 15:30:34 localhost kernel[0]: Running kernel space in FIPS MODE
Mar 27 15:30:34 localhost kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Mar 27 15:30:34 localhost kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS integrity POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS SHA POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS POST passed!
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
Mar 27 15:30:34 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Mar 27 15:30:34 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Mar 27 15:30:34 localhost kernel[0]: calling mpo_policy_init for Sandbox
Mar 27 15:30:34 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Mar 27 15:30:34 localhost kernel[0]: calling mpo_policy_init for Quarantine
Mar 27 15:30:34 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Mar 27 15:30:34 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 27 15:30:34 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Mar 27 15:30:34 localhost kernel[0]: MAC Framework successfully initialized
Mar 27 15:30:34 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Mar 27 15:30:34 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Mar 27 15:30:34 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5]
Mar 27 15:30:34 localhost kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
Mar 27 15:30:34 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1234
Mar 27 15:30:34 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
Mar 27 15:30:34 localhost kernel[0]: [ PCI configuration begin ]
Mar 27 15:30:34 localhost kernel[0]: console relocated to 0xfc0010000
Mar 27 15:30:34 localhost kernel[0]: PCI configuration changed (bridge=16 device=3 cardbus=0)
Mar 27 15:30:34 localhost kernel[0]: [ PCI configuration end, bridges 12 devices 17 ]
Mar 27 15:30:34 localhost kernel[0]: Thunderbolt runtime power conservation disabled.
Mar 27 15:30:34 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
Mar 27 15:30:34 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Mar 27 15:30:34 localhost kernel[0]: rooting via boot-uuid from /chosen: D1154437-384E-377D-B73C-B36D1F5FFEF2
Mar 27 15:30:34 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Mar 27 15:30:34 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Mar 27 15:30:34 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Mar 27 15:30:34 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Mar 27 15:30:34 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Mar 27 15:30:34 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Mar 27 15:30:34 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST32000541AS Media/IOGUIDPartitionScheme/Customer@2
Mar 27 15:30:34 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
Mar 27 15:30:34 localhost kernel[0]: Kernel is LP64
Mar 27 15:30:34 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe918aca; max speed s800.
Mar 27 15:30:34 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
Mar 27 15:30:34 localhost kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
Mar 27 15:30:34 localhost kernel[0]: 1.121155: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
Mar 27 15:30:34 localhost kernel[0]: 1.126950: Atheros: mac 448.3 phy 1.8 radio 0.0
Mar 27 15:30:34 localhost kernel[0]: 1.127693: Use hw queue 0 for WME_AC_BE traffic
Mar 27 15:30:34 localhost kernel[0]: 1.128432: Use hw queue 1 for WME_AC_BK traffic
Mar 27 15:30:34 localhost kernel[0]: 1.129173: Use hw queue 2 for WME_AC_VI traffic
Mar 27 15:30:34 localhost kernel[0]: 1.129913: Use hw queue 3 for WME_AC_VO traffic
Mar 27 15:30:34 localhost kernel[0]: 1.130651: Use hw queue 8 for CAB traffic
Mar 27 15:30:34 localhost kernel[0]: 1.131296: Use hw queue 9 for beacons
Mar 27 15:30:34 localhost kernel[0]: 1.131934: wlan_vap_create : enter. devhandle=0x3f118658, opmode=IEEE80211_M_STA, flags=0x1
Mar 27 15:30:34 localhost kernel[0]: 1.133383: wlan_vap_create : exit. devhandle=0x3f118658, opmode=IEEE80211_M_STA, flags=0x1.
Mar 27 15:30:34 localhost kernel[0]: USBMSC Identifier (non-unique): 2008102301130 0x781 0xb7bd 0x1804
Mar 27 15:30:35 localhost kernel[0]: macx_swapon SUCCESS
Mar 27 15:30:35 localhost kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:28:9d:b1
Mar 27 15:30:35 localhost kernel[0]: AirPort_AtherosNewma40: Ethernet address e4:ce:8f:56:8f:98
Mar 27 15:30:35 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Mar 27 15:30:35 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Mar 27 15:30:36 localhost kernel[0]: Waiting for DSMOS...
Mar 27 15:30:38 localhost kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff802079d000
Mar 27 15:30:38 localhost kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
Mar 27 15:30:38 localhost kernel[0]: IOBluetoothUSBDFU::probe
Mar 27 15:30:38 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
Mar 27 15:30:38 localhost kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Mar 27 15:30:38 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Mar 27 15:30:38 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Mar 27 15:30:38 localhost kernel[0]: Previous Shutdown Cause: 5
Mar 27 15:30:38 iMac-van-wesley kernel[0]: AMDBartsGraphicsAccelerator: ** Device in slot: SLOT--1 **
Mar 27 15:30:38 iMac-van-wesley kernel[0]: DSMOS has arrived
Mar 27 15:30:38 iMac-van-wesley kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
Mar 27 15:30:38 iMac-van-wesley kernel[0]: en1::IO80211Interface::postMessage bssid changed
Mar 27 15:30:39 iMac-van-wesley kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6720
Mar 27 15:30:40 iMac-van-wesley kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Mar 27 15:30:41 iMac-van-wesley kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,4de1,0000]
Mar 27 15:30:42 iMac-van-wesley kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
Mar 27 15:30:46 iMac-van-wesley kernel[0]: [BNBMouseDevice::init][75.19] init is complete
Mar 27 15:30:46 iMac-van-wesley kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
Mar 27 15:30:46 iMac-van-wesley kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
Mar 27 15:30:46 iMac-van-wesley kernel[0]: [AppleMultitouchDevice::start] entered
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypVtx.c:186 CPU is Intel
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypLowCache.c:193 Low cache initialized (106560 kB for 24 VMs on 12288 MB)
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypApic.c:211 Host APIC phy 0xFEE00000 lin 0xffffff819bf36000 ver 0x15
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypVtd.c:3941 [vtdInit]
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypVtd.c:3957 [vtdInit] VTD initialization disabled
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypSMBios.c:54 Failed to find SMBios entry point
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypModule.c:184 Parallels IPI irq = 0 ipi = 0(0x0)
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypModule.c:194 Parallels Hypervisor 7.0.15106.786747 loaded.
Mar 27 15:30:51 iMac-van-wesley kernel[0]: /prl_hid/ Parallels HID Helper started.
Mar 27 15:30:53 iMac-van-wesley kernel[0]: com.parallels.kext.prlnet 7.0.15106.786747 has started.
Mar 27 15:30:55 iMac-van-wesley kernel[0]: com.parallels.kext.vnic 7.0.15106.786747 has started.
Mar 27 15:30:56 iMac-van-wesley kernel[0]: 37.311866: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
Mar 27 15:30:56 iMac-van-wesley kernel[0]: 37.311877: switchVap from 1 to 1
Mar 27 15:30:56 iMac-van-wesley kernel[0]: 37.581056: performCountryCodeOperation: Not connected, scan in progress[0]
Mar 27 15:30:56 iMac-van-wesley kernel[0]: en1: 802.11d country code set to 'BE '.
Mar 27 15:30:56 iMac-van-wesley kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
Mar 27 15:30:57 iMac-van-wesley kernel[0]: Sandbox: sandboxd(230) deny mach-lookup com.apple.coresymbolicationd
Mar 27 15:30:57 iMac-van-wesley kernel[0]: com_parallels_kext_prl_vnic: created vnic0
Mar 27 15:30:57 iMac-van-wesley kernel[0]: com_parallels_kext_prl_vnic: created vnic1
Mar 27 15:30:57 iMac-van-wesley kernel[0]: vnic0: promiscuous mode enable failed
Mar 27 15:30:57 iMac-van-wesley kernel[0]: vnic1: promiscuous mode enable failed
Mar 27 15:30:58 iMac-van-wesley kernel[0]: /drv/ HypIoctls.c:779 Ioctl VT-d status: 0
Mar 27 15:30:59 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=306[GoogleSoftwareUp] clearing CS_VALID
Mar 27 15:31:05 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=363[ksadmin] clearing CS_VALID
Mar 27 15:31:06 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=364[ksadmin] clearing CS_VALID
Mar 27 15:31:13 iMac-van-wesley kernel[0]: utun_ctl_connect: creating interface utun0
---------- This one seems to have started up a little faster than normal, so here is an earlier startup:
Mar 27 15:20:22 localhost kernel[0]: PMAP: PCID enabled
Mar 27 15:20:22 localhost kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Mar 27 15:20:22 localhost kernel[0]: vm_page_bootstrap: 2883004 free pages and 246340 wired pages
Mar 27 15:20:22 localhost kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
Mar 27 15:20:22 localhost kernel[0]: zone leak detection enabled
Mar 27 15:20:22 localhost kernel[0]: standard timeslicing quantum is 10000 us
Mar 27 15:20:22 localhost kernel[0]: standard background quantum is 2500 us
Mar 27 15:20:22 localhost kernel[0]: mig_table_max_displ = 74
Mar 27 15:20:22 localhost kernel[0]: TSC Deadline Timer supported and enabled
Mar 27 15:20:22 localhost kernel[0]: corecrypto kext started!
Mar 27 15:20:22 localhost kernel[0]: Running kernel space in FIPS MODE
Mar 27 15:20:22 localhost kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Mar 27 15:20:22 localhost kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS integrity POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS SHA POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS POST passed!
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
Mar 27 15:20:22 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Mar 27 15:20:22 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Mar 27 15:20:22 localhost kernel[0]: calling mpo_policy_init for Sandbox
Mar 27 15:20:22 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Mar 27 15:20:22 localhost kernel[0]: calling mpo_policy_init for Quarantine
Mar 27 15:20:22 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Mar 27 15:20:22 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 27 15:20:22 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Mar 27 15:20:22 localhost kernel[0]: MAC Framework successfully initialized
Mar 27 15:20:22 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Mar 27 15:20:22 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Mar 27 15:20:22 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5]
Mar 27 15:20:22 localhost kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
Mar 27 15:20:22 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1234
Mar 27 15:20:22 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
Mar 27 15:20:22 localhost kernel[0]: [ PCI configuration begin ]
Mar 27 15:20:22 localhost kernel[0]: console relocated to 0xfc0010000
Mar 27 15:20:22 localhost kernel[0]: PCI configuration changed (bridge=16 device=3 cardbus=0)
Mar 27 15:20:22 localhost kernel[0]: [ PCI configuration end, bridges 12 devices 17 ]
Mar 27 15:20:22 localhost kernel[0]: Thunderbolt runtime power conservation disabled.
Mar 27 15:20:22 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
Mar 27 15:20:22 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Mar 27 15:20:22 localhost kernel[0]: rooting via boot-uuid from /chosen: D1154437-384E-377D-B73C-B36D1F5FFEF2
Mar 27 15:20:22 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Mar 27 15:20:22 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Mar 27 15:20:22 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Mar 27 15:20:22 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Mar 27 15:20:22 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Mar 27 15:20:22 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Mar 27 15:20:22 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST32000541AS Media/IOGUIDPartitionScheme/Customer@2
Mar 27 15:20:22 localhost kernel[0]: BSD root: disk0s2, major 1, minor 3
Mar 27 15:20:22 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe918aca; max speed s800.
Mar 27 15:20:22 localhost kernel[0]: Kernel is LP64
Mar 27 15:20:22 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
Mar 27 15:20:22 localhost kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
Mar 27 15:20:22 localhost kernel[0]: 1.004924: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
Mar 27 15:20:22 localhost kernel[0]: 1.009592: Atheros: mac 448.3 phy 5.10 radio 0.0
Mar 27 15:20:22 localhost kernel[0]: 1.009600: Use hw queue 0 for WME_AC_BE traffic
Mar 27 15:20:22 localhost kernel[0]: 1.009605: Use hw queue 1 for WME_AC_BK traffic
Mar 27 15:20:22 localhost kernel[0]: 1.009610: Use hw queue 2 for WME_AC_VI traffic
Mar 27 15:20:22 localhost kernel[0]: 1.009615: Use hw queue 3 for WME_AC_VO traffic
Mar 27 15:20:22 localhost kernel[0]: 1.009620: Use hw queue 8 for CAB traffic
Mar 27 15:20:22 localhost kernel[0]: 1.009624: Use hw queue 9 for beacons
Mar 27 15:20:22 localhost kernel[0]: 1.009691: wlan_vap_create : enter. devhandle=0x62f97658, opmode=IEEE80211_M_STA, flags=0x1
Mar 27 15:20:22 localhost kernel[0]: 1.009722: wlan_vap_create : exit. devhandle=0x62f97658, opmode=IEEE80211_M_STA, flags=0x1.
Mar 27 15:20:22 localhost kernel[0]: USBMSC Identifier (non-unique): 2008102301130 0x781 0xb7bd 0x1804
Mar 27 15:20:23 localhost kernel[0]: macx_swapon SUCCESS
Mar 27 15:20:24 localhost kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:28:9d:b1
Mar 27 15:20:24 localhost kernel[0]: AirPort_AtherosNewma40: Ethernet address e4:ce:8f:56:8f:98
Mar 27 15:20:24 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Mar 27 15:20:24 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Mar 27 15:20:25 localhost kernel[0]: Waiting for DSMOS...
Mar 27 15:20:25 localhost kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff80450fc000
Mar 27 15:20:25 localhost kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
Mar 27 15:20:25 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Mar 27 15:20:25 localhost kernel[0]: IOBluetoothUSBDFU::probe
Mar 27 15:20:25 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
Mar 27 15:20:25 localhost kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Mar 27 15:20:25 localhost kernel[0]: AMDBartsGraphicsAccelerator: ** Device in slot: SLOT--1 **
Mar 27 15:20:25 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Mar 27 15:20:25 localhost kernel[0]: Previous Shutdown Cause: 5
Mar 27 15:20:25 localhost kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6720
Mar 27 15:20:25 localhost kernel[0]: DSMOS has arrived
Mar 27 15:20:25 localhost kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
Mar 27 15:20:25 localhost kernel[0]: en1::IO80211Interface::postMessage bssid changed
Mar 27 15:20:26 iMac-van-wesley kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
Mar 27 15:20:26 iMac-van-wesley kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Mar 27 15:20:29 iMac-van-wesley kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,4de1,0000]
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypVtx.c:186 CPU is Intel
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypLowCache.c:193 Low cache initialized (106560 kB for 24 VMs on 12288 MB)
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypApic.c:211 Host APIC phy 0xFEE00000 lin 0xffffff818aca5000 ver 0x15
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypVtd.c:3941 [vtdInit]
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypVtd.c:3957 [vtdInit] VTD initialization disabled
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypSMBios.c:54 Failed to find SMBios entry point
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypModule.c:184 Parallels IPI irq = 0 ipi = 0(0x0)
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypModule.c:194 Parallels Hypervisor 7.0.15106.786747 loaded.
Mar 27 15:20:37 iMac-van-wesley kernel[0]: 28.890941: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
Mar 27 15:20:37 iMac-van-wesley kernel[0]: 28.890949: switchVap from 1 to 1
Mar 27 15:20:37 iMac-van-wesley kernel[0]: 29.160659: performCountryCodeOperation: Not connected, scan in progress[0]
Mar 27 15:20:37 iMac-van-wesley kernel[0]: /prl_hid/ Parallels HID Helper started.
Mar 27 15:20:40 iMac-van-wesley kernel[0]: com.parallels.kext.prlnet 7.0.15106.786747 has started.
Mar 27 15:20:40 iMac-van-wesley kernel[0]: en1: 802.11d country code set to 'BE '.
Mar 27 15:20:40 iMac-van-wesley kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
Mar 27 15:20:43 iMac-van-wesley kernel[0]: com.parallels.kext.vnic 7.0.15106.786747 has started.
Mar 27 15:20:48 iMac-van-wesley kernel[0]: [BNBMouseDevice::init][75.19] init is complete
Mar 27 15:20:48 iMac-van-wesley kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
Mar 27 15:20:48 iMac-van-wesley kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
Mar 27 15:20:48 iMac-van-wesley kernel[0]: [AppleMultitouchDevice::start] entered
Mar 27 15:20:52 iMac-van-wesley kernel[0]: com_parallels_kext_prl_vnic: created vnic0
Mar 27 15:20:52 iMac-van-wesley kernel[0]: com_parallels_kext_prl_vnic: created vnic1
Mar 27 15:20:55 iMac-van-wesley kernel[0]: [SendHCIRequestFormatted] ### ERROR: [0x0C37] (Write Link Supervision Timeout) -- Send request failed (err = 0x0012 (kBluetoothHCIErrorInvalidHCICommandParameters))
Mar 27 15:20:56 iMac-van-wesley kernel[0]: vnic0: promiscuous mode enable failed
Mar 27 15:20:56 iMac-van-wesley kernel[0]: vnic1: promiscuous mode enable failed
Mar 27 15:20:56 iMac-van-wesley kernel[0]: /drv/ HypIoctls.c:779 Ioctl VT-d status: 0
Mar 27 15:20:56 iMac-van-wesley kernel[0]: utun_ctl_connect: creating interface utun0
Mar 27 15:20:58 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=303[GoogleSoftwareUp] clearing CS_VALID
Mar 27 15:21:02 iMac-van-wesley kernel[0]: Sandbox: sandboxd(315) deny mach-lookup com.apple.coresymbolicationd
Mar 27 15:21:06 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=359[ksadmin] clearing CS_VALID
Mar 27 15:21:07 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=360[ksadmin] clearing CS_VALID
Thanks for all help provided! -
Windows boot wait for RAID initialization
My windows startup is greatly slowed by my RAID!
I have 3 disks -- 2x Samsung SSD in RAID 0 through a Dell perc h330, and one Corsair SSD connected to the motherboard.
Windows is installed on the Corsair SSD. The RAID has no file on it currently.
Each time my machine boots, initialization of RAID costs roughly 40 secs. I disabled the RAID bios in MB CSM settings so that it doesn't show the black screen of initialization, but it doesn't save any time, for the 40 secs are added to the windows startup
screen i.e. the circle dots, walks 30+ cycles.
I suspect that is because windows is still waiting for the Raid to get ready before entering desktop. But that wastes a lot of time. Must windows wait for that piece of hardware to get ready before entering desktop? Why these two processes aren't parallel
when windows doesn't depend on the raid?
My question is, is there any way to bypass the wait time and boot into desktop first?
ThanksHi,
According to your description, you've already disabled the raid bios but still has a long boot time. We might take other factors into consideration such as other hardware components, applications, network, etc.
Please see detailed information in this link:
Root Causes for Slow Boots and Logons (sbsl)
http://social.technet.microsoft.com/wiki/contents/articles/10130.root-causes-for-slow-boots-and-logons-sbsl.aspx
Or you might refer to some discussions in the following link:
https://communities.intel.com/message/241965
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
[SOLVED] Random kernel panics during boot (Waiting for UDev uevents..)
Update 2012-03-31: Workaround confirmed to work, see tenthirteen's post.
Update 2012-02-03: I've narrowed down the problem to the 3.x kernels. Downgrading to kernel26-2.6.38.5-1, with the other packages up-to-date (using nouveau instead of nvidia driver), solves the problem. Still, I still consider this a problem since it forces me to use an older kernel, so if anyone has any idea how to find the problem I would be very thankful!
When I came back home after the summer vacations I did a huge upgrade with pacman -Syu (of course I read the announcements before). This included linux (3.0.3-1) from kernel26 (2.6.38.5-1) and udev (167-2 -> 173-3). After this point, the boot process randomly fails from time to time; today I had to restart more than 20 times before my machine would boot successfully.
It always occurs during "Waiting for UDev uvents to be processed". Some of the errors are:
1. The computer freezes when the message is shown (cursor stops to blink).
2. Nothing happens for a long time, then Waiting for UDev uvents to be processed [ FAIL ]s.
3. Short and long error messages that look similar to this guy's (except for the last line).
I greped for some of the error messages in /var/log but they don't seem to be logged, so the examples below are from my handwritten notes and thus not very complete (there are a lot of other error messages except these lines). It's also possible that there are some mistakes. Note that they're from different boots.
BUG: Soft lockup - CPU#1 stuck for 23 s! [modprobe:256]
BUG: Unable to handle kernel
--[End ...]--
note: udevd[225] exited with preempt_count 2
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0147299
BUG: Unable to handle kernel paging request at f8d20076
Code: Bad EIP value.
EIP: ...
CRZ: ...
--[End ...]--
Kernel panic - not syncing: Attempted to kill the idle task!
Lock: Bad EIP value
Note: modprobe [296] exited with preempt_count 3
WARNING: at kernel/watchdog.c:240 watchdog-overflow-callback+0xac/...
BUG: Unable to handle kernel NULL pointer dereference at 00000286
BUG: Unable to handle kernel NULL pointer dereference at (null)
These errors are seemingly arbitrary which makes it very hard to find the problem. Sometimes it works without a single complaint, sometimes it says something about "No caching mode page present, Assuming drive cache: write through", and sometimes I get different errors (the examples above are only from today!). As you can imagine, it gets pretty annoying.
So far I've tried to:
* Use the fallback mode - nope.
* Rerun mkinitcpio -p linux - nope.
* Append noapic and nomodeset to the kernel in GRUB - nope.
* Install and try kernel26-lts - seems to work, although I don't understand what other differences there are (e.g., it doesn't start X). At least this seems to suggest that it's not a hardware problem.
* Unplug all USB devices before boot - sometimes works, sometimes not. Doesn't seem to be a direct connection.
* Remove my custom settings in /etc/modprobe.d - nope.
* A lot of other things I've forgotten.
Edit: I forgot to mention, once it's booted, the system works perfectly fine. No kernel panics etc. That's the second reason why I suspect it's not a hardware failure.
I've been thinking about trying to downgrade the kernel and udev, but with the renaming and all dependencies I'm not sure how to do that.
Since I've run out of ideas how to troubleshoot this issue, I would appreciate if I could get some suggestions here. I've search around and found similar posts but no solution that works for me.
Finally, here are some more information.
uname -a:
Linux archon 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686 Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux
The packages that I upgraded with pacman -Syu that day (removed most KDE packages from the list):
[2011-08-26 15:14] Running 'pacman-color -Syu'
[2011-08-26 15:14] synchronizing package lists
[2011-08-26 15:18] Running 'pacman-color -Sy pacman'
[2011-08-26 15:18] synchronizing package lists
[2011-08-26 15:18] upgraded linux-api-headers (2.6.38.1-1 -> 3.0.1-1)
[2011-08-26 15:19] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2011-08-26 15:19] Generating locales...
[2011-08-26 15:19] en_US.UTF-8... done
[2011-08-26 15:19] en_US.ISO-8859-1... done
[2011-08-26 15:19] sv_SE.UTF-8... done
[2011-08-26 15:19] sv_SE.ISO-8859-1... done
[2011-08-26 15:19] Generation complete.
[2011-08-26 15:19] upgraded glibc (2.13-5 -> 2.14-5)
[2011-08-26 15:19] upgraded pacman (3.5.3-1 -> 3.5.4-4)
[2011-08-26 15:27] Running 'pacman-color -Syu'
[2011-08-26 15:27] synchronizing package lists
[2011-08-26 15:27] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Rsn linuxwacom-bamboo-cth-ctl'
[2011-08-26 15:29] removed linuxwacom-bamboo-cth-ctl (0.10.99.1-1)
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:29] Running 'pacman-color -Syu'
[2011-08-26 15:29] synchronizing package lists
[2011-08-26 15:29] starting full system upgrade
[2011-08-26 15:53] Running 'pacman-color -Syu'
[2011-08-26 15:53] synchronizing package lists
[2011-08-26 15:54] starting full system upgrade
[2011-08-26 16:03] warning: /etc/krb5.conf saved as /etc/krb5.conf.pacsave
[2011-08-26 16:03] removed heimdal (1.3.3-4)
[2011-08-26 16:03] removed eigen (2.0.15-1)
[2011-08-26 16:03] removed python2-qt (4.8.3-1)
[2011-08-26 16:03] removed kernel26 (2.6.38.5-1)
[2011-08-26 16:04] removed kernel26-headers (2.6.38.5-1)
[2011-08-26 16:04] removed libreoffice (3.3.2-2)
[2011-08-26 16:04] upgraded readline (6.2.001-1 -> 6.2.001-2)
[2011-08-26 16:04] upgraded bash (4.2.008-1 -> 4.2.010-1)
[2011-08-26 16:04] upgraded attr (2.4.44-3 -> 2.4.46-1)
[2011-08-26 16:04] upgraded acl (2.2.49-2 -> 2.2.51-1)
[2011-08-26 16:04] upgraded rsync (3.0.8-1 -> 3.0.8-2)
[2011-08-26 16:04] upgraded abs (2.4.2-1 -> 2.4.3-1)
[2011-08-26 16:04] upgraded gcc-libs (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:04] upgraded zlib (1.2.5-3 -> 1.2.5-4)
[2011-08-26 16:04] upgraded icu (4.6.1-1 -> 4.8.1-1)
[2011-08-26 16:04] upgraded boost-libs (1.46.0-4 -> 1.47.0-1)
[2011-08-26 16:04] upgraded libmysqlclient (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] upgraded mysql-clients (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] hostname and {,yp,nis}domainname has moved:
[2011-08-26 16:04] ----------
[2011-08-26 16:04] hostname is now in coreutils
[2011-08-26 16:04] domainname is now in yp-tools
[2011-08-26 16:04] their functionality might have changed slightly
[2011-08-26 16:04]
[2011-08-26 16:04] dnsdomainname remains in net-tools
[2011-08-26 16:04] ----------
[2011-08-26 16:04] upgraded net-tools (1.60-14 -> 1.60-18)
[2011-08-26 16:04] warning: directory permissions differ on var/lib/mysql/
filesystem: 755 package: 700
[2011-08-26 16:04] upgraded mysql (5.5.11-1 -> 5.5.15-1)
[2011-08-26 16:04] upgraded libpng (1.4.5-1 -> 1.4.8-1)
[2011-08-26 16:04] upgraded sqlite3 (3.7.6.1-1 -> 3.7.7.1-1)
[2011-08-26 16:04] upgraded run-parts (3.4.1-1 -> 3.4.4-1)
[2011-08-26 16:04] upgraded db (5.1.25-1 -> 5.2.28-1)
[2011-08-26 16:04] installed libgssglue (0.3-1)
[2011-08-26 16:04] installed libtirpc (0.2.2-2)
[2011-08-26 16:04] upgraded pam (1.1.3-1 -> 1.1.4-1)
[2011-08-26 16:04] Fixing gshadow file ...
[2011-08-26 16:04] upgraded shadow (4.1.4.3-1 -> 4.1.4.3-2)
[2011-08-26 16:04] upgraded gmp (5.0.1-2 -> 5.0.2-3)
[2011-08-26 16:04] upgraded libcap (2.20-1 -> 2.22-1)
[2011-08-26 16:04] upgraded coreutils (8.12-1 -> 8.12-3)
[2011-08-26 16:04] Updating certificates. This might take a while...
[2011-08-26 16:04] upgraded ca-certificates (20090814+nmu2-1 -> 20110421-3)
[2011-08-26 16:04] upgraded pcre (8.12-1 -> 8.13-2)
[2011-08-26 16:04] upgraded glib2 (2.28.6-1 -> 2.28.8-1)
[2011-08-26 16:04] upgraded iana-etc (2.30-1 -> 2.30-2)
[2011-08-26 16:04] warning: /etc/fstab installed as /etc/fstab.pacnew
[2011-08-26 16:04] warning: directory permissions differ on run/
filesystem: 1777 package: 755
[2011-08-26 16:04] upgraded filesystem (2011.04-1 -> 2011.08-1)
[2011-08-26 16:04] upgraded dbus-core (1.4.1-1 -> 1.4.14-1)
[2011-08-26 16:04] upgraded xproto (7.0.21-1 -> 7.0.22-1)
[2011-08-26 16:04] upgraded libx11 (1.4.3-2 -> 1.4.4-1)
[2011-08-26 16:05] upgraded dbus (1.4.1-1 -> 1.4.14-1)
[2011-08-26 16:05] upgraded freetype2 (2.4.4-2 -> 2.4.6-1)
[2011-08-26 16:05] upgraded libxfont (1.4.3-1 -> 1.4.4-1)
[2011-08-26 16:05] upgraded util-linux (2.19-4 -> 2.19.1-3)
[2011-08-26 16:05] upgraded module-init-tools (3.12-2 -> 3.16-1)
[2011-08-26 16:05] ATTENTION UDEV:
[2011-08-26 16:05] ----------
[2011-08-26 16:05] Kernel 2.6.32 or newer is now required.
[2011-08-26 16:05] --
[2011-08-26 16:05] OSS emulation modules are not loaded by default, add to rc.conf if needed.
[2011-08-26 16:05] --
[2011-08-26 16:05] Arch specific cd symlinks are now no longer created.
[2011-08-26 16:05] --
[2011-08-26 16:05] cd and net persistent rules will no longer be autogenerated,
[2011-08-26 16:05] see <https://wiki.archlinux.org/index.php/Udev> for details.
[2011-08-26 16:05] --
[2011-08-26 16:05] Errors are now logged (possibly to the console) by default.
[2011-08-26 16:05] --
[2011-08-26 16:05] Arch's custom blacklisting logic has been removed. MOD_AUTOLOAD and
[2011-08-26 16:05] blacklisting in MODULES no longer works.
[2011-08-26 16:05] See 'man modprobe.conf' for a replacement to blacklisting.
[2011-08-26 16:05] To disable a module mod1 on the kernel command line, use
[2011-08-26 16:05] mod1.disable=1
[2011-08-26 16:05] or
[2011-08-26 16:05] modprobe.blacklist=mod1
[2011-08-26 16:05] --
[2011-08-26 16:05] The following modules are no longer unconditionally loaded:
[2011-08-26 16:05] pcspkr irtty-sir analog lp ppdev ide-generic
[2011-08-26 16:05] Add them to MODULES in rc.conf if you need them.
[2011-08-26 16:05] --
[2011-08-26 16:05] Support for non-devtmpfs self-compiled kernels have been moved to udev-compat.
[2011-08-26 16:05] --
[2011-08-26 16:05] Blacklisting of framebuffer devices has moved from /etc/modprobe.d to
[2011-08-26 16:05] /lib/modprobe.d. Any customizations shoud be done to the file in /etc, as it
[2011-08-26 16:05] takes precedence.
[2011-08-26 16:05] --
[2011-08-26 16:05] kbd and rtc devices are no longer world readable.
[2011-08-26 16:05] --
[2011-08-26 16:05] rtc is no longer in the audio group and fb devices are no longer in
[2011-08-26 16:05] the video group, as permissions and ownership of fb devices are controlled
[2011-08-26 16:05] by X.
[2011-08-26 16:05] ---------------
[2011-08-26 16:05] upgraded udev (167-2 -> 173-3)
[2011-08-26 16:05] upgraded libdrm (2.4.25-1 -> 2.4.26-1)
[2011-08-26 16:05] upgraded pixman (0.20.2-1 -> 0.22.2-1)
[2011-08-26 16:05] upgraded libgpg-error (1.9-3 -> 1.10-1)
[2011-08-26 16:05] upgraded libgcrypt (1.4.6-3 -> 1.5.0-1)
[2011-08-26 16:05] upgraded xorg-xkbcomp (1.2.1-2 -> 1.2.3-1)
[2011-08-26 16:05] upgraded xorg-server-common (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:05] upgraded xorg-server (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:05] upgraded nvidia-173xx-utils (173.14.30-1 -> 173.14.31-1)
[2011-08-26 16:05] upgraded libxext (1.2.0-1 -> 1.3.0-1)
[2011-08-26 16:05] upgraded libxrandr (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:05] upgraded inputproto (2.0.1-1 -> 2.0.2-1)
[2011-08-26 16:05] upgraded libxi (1.4.2-1 -> 1.4.3-1)
[2011-08-26 16:05] upgraded xorg-xset (1.2.1-2 -> 1.2.2-1)
[2011-08-26 16:05] upgraded xdg-utils (1.1.0rc1-2 -> 1.1.0rc1-3)
[2011-08-26 16:05] upgraded qt (4.7.2-6 -> 4.7.3-3)
[2011-08-26 16:05] installed libssh2 (1.2.9-1)
[2011-08-26 16:05] upgraded curl (7.21.6-1 -> 7.21.7-1)
[2011-08-26 16:05] upgraded raptor (2.0.2-1 -> 2.0.4-1)
[2011-08-26 16:05] upgraded mpfr (3.0.1-1 -> 3.0.1.p4-2)
[2011-08-26 16:05] upgraded rasqal (1:0.9.21-1 -> 1:0.9.27-1)
[2011-08-26 16:05] upgraded binutils (2.21-7 -> 2.21.1-2)
[2011-08-26 16:05] upgraded libmpc (0.9-1 -> 0.9-2)
[2011-08-26 16:05] upgraded isl (0.06-1 -> 0.06-2)
[2011-08-26 16:05] upgraded cloog (0.16.2-1 -> 0.16.2-2)
[2011-08-26 16:05] upgraded ppl (0.11.2-1 -> 0.11.2-2)
[2011-08-26 16:05] upgraded gcc (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:05] upgraded libtool (2.4-3 -> 2.4-4)
[2011-08-26 16:05] upgraded redland (1:1.0.12-1 -> 1:1.0.14-1)
[2011-08-26 16:05] upgraded redland-storage-virtuoso (1:1.0.12-1 -> 1:1.0.14-1)
[2011-08-26 16:05] upgraded soprano (2.6.0-5 -> 2.7.0-1)
[2011-08-26 16:05] upgraded akonadi (1.5.2-1 -> 1.6.0-2)
[2011-08-26 16:05] upgraded dialog (1.1_20110302-1 -> 1.1_20110707-1)
[2011-08-26 16:05] upgraded psmisc (22.13-1 -> 22.14-1)
[2011-08-26 16:05] upgraded alsa-utils (1.0.24.2-1 -> 1.0.24.2-3)
[2011-08-26 16:06] upgraded exiv2 (0.21.1-1 -> 0.21.1-2)
[2011-08-26 16:06] upgraded strigi (git20110405-1 -> 0.7.5-4)
[2011-08-26 16:06] upgraded xz (5.0.2-1 -> 5.0.3-1)
[2011-08-26 16:06] upgraded libsasl (2.1.23-5 -> 2.1.23-7)
[2011-08-26 16:06] upgraded libldap (2.4.24-1 -> 2.4.26-3)
[2011-08-26 16:06] upgraded keyutils (1.4-1 -> 1.5.2-1)
[2011-08-26 16:06] installed krb5 (1.9.1-3)
[2011-08-26 16:06] upgraded shared-desktop-ontologies (0.6.0-1 -> 0.7.1-1)
[2011-08-26 16:06] upgraded libdbusmenu-qt (0.8.2-1 -> 0.8.3-1)
[2011-08-26 16:06] upgraded grantlee (0.1.8-1 -> 0.1.9-1)
[2011-08-26 16:06] upgraded aspell (0.60.6-5 -> 0.60.6.1-1)
[2011-08-26 16:06] upgraded dbus-glib (0.92-1 -> 0.94-2)
[2011-08-26 16:06] upgraded hunspell (1.2.15-1 -> 1.3.2-1)
[2011-08-26 16:06] upgraded enchant (1.6.0-1 -> 1.6.0-3)
[2011-08-26 16:06] upgraded libogg (1.2.2-1 -> 1.3.0-1)
[2011-08-26 16:06] upgraded flac (1.2.1-2 -> 1.2.1-3)
[2011-08-26 16:06] upgraded libsndfile (1.0.24-1 -> 1.0.25-1)
[2011-08-26 16:06] upgraded libpulse (0.9.22-2 -> 0.9.23-1)
[2011-08-26 16:06] installed libqzeitgeist (0.7.0-1)
[2011-08-26 16:06] upgraded pango (1.28.4-2 -> 1.28.4-3)
[2011-08-26 16:06] upgraded gstreamer0.10 (0.10.32-1 -> 0.10.35-1)
[2011-08-26 16:06] upgraded gstreamer0.10-base (0.10.32-4 -> 0.10.35-1)
[2011-08-26 16:06] upgraded gstreamer0.10-base-plugins (0.10.32-4 -> 0.10.35-1)
[2011-08-26 16:06] upgraded phonon-gstreamer (4.5.0-1 -> 4.5.1-1)
[2011-08-26 16:06] upgraded sdl (1.2.14-6 -> 1.2.14-7)
[2011-08-26 16:06] upgraded xvidcore (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:06] upgraded x264 (20110327-1 -> 20110617-1)
[2011-08-26 16:06] upgraded libvpx (0.9.6-2 -> 0.9.7.p1-1)
[2011-08-26 16:06] upgraded libva (1.0.12-1 -> 1.0.14-1)
[2011-08-26 16:06] installed rtmpdump (2.4-1)
[2011-08-26 16:06] upgraded ffmpeg (20110330-1 -> 20110724-1)
[2011-08-26 16:06] upgraded cifs-utils (4.9-2 -> 4.9-3)
[2011-08-26 16:06] upgraded smbclient (3.5.8-2 -> 3.6.0-4)
[2011-08-26 16:06] upgraded mesa (7.10.2-2 -> 7.11-1)
[2011-08-26 16:06] upgraded libsamplerate (0.1.7-1 -> 0.1.8-1)
[2011-08-26 16:06] upgraded jack (0.120.1-1 -> 0.121.2-2)
[2011-08-26 16:06] upgraded fluidsynth (1.1.3-2 -> 1.1.4-1)
[2011-08-26 16:06] upgraded libass (0.9.11-1 -> 0.9.13-1)
[2011-08-26 16:06] upgraded libproxy (0.4.6-6 -> 0.4.7-1)
[2011-08-26 16:06] upgraded libjpeg-turbo (1.1.0-1 -> 1.1.1-3)
[2011-08-26 16:06] upgraded v4l-utils (0.8.3-1 -> 0.8.5-1)
[2011-08-26 16:06] upgraded taglib (1.7-1 -> 1.7-3)
[2011-08-26 16:06] upgraded libdvbpsi (0.1.7-1 -> 0.2.0-1)
[2011-08-26 16:06] upgraded libebml (1.2.0-1 -> 1.2.1-1)
[2011-08-26 16:06] upgraded libmatroska (1.1.0-1 -> 1.2.0-1)
[2011-08-26 16:06] upgraded libmodplug (0.8.8.1-1 -> 0.8.8.3-1)
[2011-08-26 16:06] upgraded libmpeg2 (0.5.1-1 -> 0.5.1-3)
[2011-08-26 16:06] upgraded libmtp (1.0.2-2 -> 1.1.0-1)
[2011-08-26 16:06] installed libupnp (1.6.13-1)
[2011-08-26 16:06] upgraded vlc (1.1.9-1 -> 1.1.11-4)
[2011-08-26 16:06] upgraded phonon-vlc (0.4.0-1 -> 0.4.1-1)
[2011-08-26 16:06] upgraded phonon (4.5.0-1 -> 4.5.55-1)
[2011-08-26 16:06] upgraded upower (0.9.10-1 -> 0.9.12-1)
[2011-08-26 16:07] upgraded device-mapper (2.02.84-1 -> 2.02.88-1)
[2011-08-26 16:07] upgraded parted (2.3-1 -> 3.0-3)
[2011-08-26 16:07] upgraded lvm2 (2.02.84-1 -> 2.02.88-1)
[2011-08-26 16:07] upgraded eject (2.1.5-5 -> 2.1.5-7)
[2011-08-26 16:07] upgraded udisks (1.0.3-2 -> 1.0.3-6)
[2011-08-26 16:07] upgraded libxcursor (1.1.11-1 -> 1.1.12-1)
[2011-08-26 16:07] upgraded ntrack (1:13-1 -> 1:13-2)
[2011-08-26 16:07] upgraded libssh (0.4.8-1 -> 0.5.1-1)
[2011-08-26 16:07] upgraded oxygen-icons (4.6.2-1 -> 4.7.0-1)
[2011-08-26 16:07] upgraded xorg-xauth (1.0.5-2 -> 1.0.6-1)
[2011-08-26 16:07] installed qjson (0.7.1-1)
[2011-08-26 16:08] upgraded amarok (2.4.0-4 -> 2.4.3-1)
[2011-08-26 16:08] upgraded apr (1.4.2-1 -> 1.4.5-1)
[2011-08-26 16:08] upgraded apr-util (1.3.10-2 -> 1.3.12-2)
[2011-08-26 16:08] upgraded atk (2.0.0-1 -> 2.0.1-1)
[2011-08-26 16:08] upgraded avahi (0.6.30-2 -> 0.6.30-4)
[2011-08-26 16:08] installed eigen2 (2.0.16-1)
[2011-08-26 16:08] upgraded libffi (3.0.9-1 -> 3.0.10-1)
[2011-08-26 16:08] upgraded python (3.2-2 -> 3.2.1-1)
[2011-08-26 16:08] installed sip (4.12.4-1)
[2011-08-26 16:08] installed pyqt (4.8.5-1)
[2011-08-26 16:08] upgraded python2 (2.7.1-9 -> 2.7.2-2)
[2011-08-26 16:08] upgraded python2-sip (4.12.1-1 -> 4.12.4-1)
[2011-08-26 16:08] upgraded dbus-python (0.83.1-2 -> 0.84.0-1)
[2011-08-26 16:08] installed python2-pyqt (4.8.5-1)
[2011-08-26 16:08] upgraded glew (1.5.8-1 -> 1.6.0-1)
[2011-08-26 16:08] upgraded blas (3.3.0-2 -> 3.3.1-2)
[2011-08-26 16:08] upgraded lapack (3.3.0-2 -> 3.3.1-2)
[2011-08-26 16:08] upgraded python2-numpy (1.5.1-2 -> 1.6.0-1)
[2011-08-26 16:08] upgraded avogadro (1.0.3-1 -> 1.0.3-3)
[2011-08-26 16:08] upgraded bison (2.4.3-1 -> 2.5-1)
[2011-08-26 16:08] upgraded bluez (4.93-1 -> 4.96-1)
[2011-08-26 16:08] upgraded boost (1.46.0-4 -> 1.47.0-1)
[2011-08-26 16:08] upgraded cabextract (1.3-1 -> 1.4-1)
[2011-08-26 16:08] upgraded libsigc++ (2.2.9-1 -> 2.2.10-1)
[2011-08-26 16:08] upgraded cairomm (1.9.8-1 -> 1.10.0-1)
[2011-08-26 16:08] upgraded chmlib (0.40-1 -> 0.40-2)
[2011-08-26 16:08] installed nettle (2.2-1)
[2011-08-26 16:08] upgraded gnutls (2.12.3-1 -> 3.0.1-1)
[2011-08-26 16:08] upgraded libcups (1.4.6-1 -> 1.4.8-2)
[2011-08-26 16:08] upgraded gdk-pixbuf2 (2.23.3-1 -> 2.23.5-1)
[2011-08-26 16:08] upgraded gtk-update-icon-cache (2.24.4-1 -> 2.24.5-3)
[2011-08-26 16:08] upgraded gtk2 (2.24.4-1 -> 2.24.5-3)
[2011-08-26 16:09] upgraded nspr (4.8.7-1 -> 4.8.9-1)
[2011-08-26 16:09] upgraded nss (3.12.9-1 -> 3.12.11-1)
[2011-08-26 16:09] upgraded libevent (2.0.10-1 -> 2.0.12-1)
[2011-08-26 16:09] upgraded xorg-mkfontscale (1.0.8-1 -> 1.0.9-1)
[2011-08-26 16:10] upgraded ttf-dejavu (2.32-2 -> 2.33-1)
[2011-08-26 16:10] upgraded chromium (11.0.696.57-1 -> 13.0.782.215-1)
[2011-08-26 16:10] upgraded cln (1.3.1-1 -> 1.3.2-1)
[2011-08-26 16:10] upgraded clucene (0.9.21b-1 -> 2.3.3.4-1)
[2011-08-26 16:11] upgraded cmake (2.8.4-1 -> 2.8.5-1)
[2011-08-26 16:11] upgraded consolekit (0.4.4-1 -> 0.4.5-1)
[2011-08-26 16:11] upgraded cryptsetup (1.2.0-1 -> 1.3.1-2)
[2011-08-26 16:11] upgraded poppler (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:11] daemon script has been renamed to /etc/rc.d/cupsd
[2011-08-26 16:11] change your entry in /etc/rc.conf
[2011-08-26 16:11] upgraded cups (1.4.6-1 -> 1.4.8-2)
[2011-08-26 16:11] upgraded cvs (1.11.23-6 -> 1.11.23-7)
[2011-08-26 16:11] upgraded dash (0.5.6.1-2 -> 0.5.7-2)
[2011-08-26 16:11] upgraded dconf (0.7.3-2 -> 0.8.0-1)
[2011-08-26 16:11] upgraded dcron (4.4-2 -> 4.5-2)
[2011-08-26 16:11] upgraded diffutils (3.0-2 -> 3.1-1)
[2011-08-26 16:11] upgraded libksba (1.0.8-1 -> 1.2.0-1)
[2011-08-26 16:11] upgraded libassuan (2.0.1-1 -> 2.0.2-1)
[2011-08-26 16:11] upgraded dirmngr (1.1.0-1 -> 1.1.0-3)
[2011-08-26 16:11] upgraded dri2proto (2.3-1 -> 2.6-1)
[2011-08-26 16:11] upgraded fakeroot (1.15.1-1 -> 1.17-1)
[2011-08-26 16:11] upgraded file (5.06-1 -> 5.08-1)
[2011-08-26 16:11] upgraded startup-notification (0.10-2 -> 0.12-1)
[2011-08-26 16:11] upgraded mime-types (1.0-3 -> 8-1)
[2011-08-26 16:11] upgraded libnotify (0.7.2-1 -> 0.7.3-1)
[2011-08-26 16:11] upgraded firefox (4.0.1-1 -> 6.0-1)
[2011-08-26 16:11] upgraded flashplugin (10.2.159.1-2 -> 10.3.183.7-1)
[2011-08-26 16:11] - The directories /usr/lib/perl5/current, /usr/lib/perl5/site_perl/current,
[2011-08-26 16:11] /usr/lib/perl5/site_perl/5.10.1, and /usr/share/perl5/site_perl/5.10.1
[2011-08-26 16:11] have been removed from @INC.
[2011-08-26 16:11] - The script/binary directories are now /usr/bin/*_perl instead of
[2011-08-26 16:11] /usr/lib/perl5/*_perl/bin which will be eventually removed.
[2011-08-26 16:11] upgraded perl (5.12.3-1 -> 5.14.1-3)
[2011-08-26 16:11] upgraded foomatic-db (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded foomatic-filters (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded foomatic-db-engine (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
[2011-08-26 16:11] upgraded fortune-mod (1.99.1-4 -> 1.99.1-5)
[2011-08-26 16:12] upgraded fpc (2.4.2-1 -> 2.4.4-3)
[2011-08-26 16:12] upgraded gawk (3.1.8-2 -> 4.0.0-1)
[2011-08-26 16:12] upgraded gc (7.1-1 -> 7.1-3)
[2011-08-26 16:12] upgraded gcc-fortran (4.6.0-4 -> 4.6.1-3)
[2011-08-26 16:12] upgraded gdb (7.2-2 -> 7.3-2)
[2011-08-26 16:12] upgraded libftdi (0.18-2 -> 0.19-1)
[2011-08-26 16:12] upgraded lirc-utils (1:0.9.0-2 -> 1:0.9.0-6)
[2011-08-26 16:12] installed mpg123 (1.13.3-2)
[2011-08-26 16:12] upgraded mplayer (33159-1 -> 34007-1)
[2011-08-26 16:12] upgraded gnome-mplayer (1.0.3-1 -> 1.0.4-1)
[2011-08-26 16:12] upgraded gecko-mediaplayer (1.0.3-1 -> 1.0.4-1)
[2011-08-26 16:12] upgraded libggz (0.0.14.1-1 -> 0.0.14.1-2)
[2011-08-26 16:12] upgraded ggz-client-libs (0.0.14.1-1 -> 0.0.14.1-2)
[2011-08-26 16:12] upgraded ghostscript (9.02-1 -> 9.04-5)
[2011-08-26 16:12] upgraded pygobject-devel (2.28.4-1 -> 2.28.6-1)
[2011-08-26 16:12] upgraded pygobject (2.28.4-1 -> 2.28.6-1)
[2011-08-26 16:12] upgraded pygtk (2.24.0-1 -> 2.24.0-2)
[2011-08-26 16:12] upgraded gimp (2.6.11-5 -> 2.6.11-6)
[2011-08-26 16:12] upgraded git (1.7.5-1 -> 1.7.6.1-1)
[2011-08-26 16:12] upgraded glibmm (2.28.0-1 -> 2.28.2-1)
[2011-08-26 16:12] upgraded glib-networking (2.28.6.1-2 -> 2.28.7-4)
[2011-08-26 16:12] upgraded glproto (1.4.12-1 -> 1.4.14-1)
[2011-08-26 16:12] upgraded gnugo (3.8-1 -> 3.8-2)
[2011-08-26 16:12] upgraded gnupg (1.4.11-2 -> 1.4.11-3)
[2011-08-26 16:12] upgraded pinentry (0.8.1-1 -> 0.8.1-3)
[2011-08-26 16:12] upgraded gnupg2 (2.0.17-1 -> 2.0.18-1)
[2011-08-26 16:12] upgraded wxgtk (2.8.12-1 -> 2.8.12.1-1)
[2011-08-26 16:12] ==> To add the gnuplot mode in Emacs, add the content of /usr/share/emacs/site-lisp/dotemacs to your ~/.emacs file.
[2011-08-26 16:12] Updating TeX tree...
[2011-08-26 16:12] mktexlsr: Updating /etc/texmf/ls-R...
[2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf/ls-R...
[2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2011-08-26 16:13] mktexlsr: Updating /var/lib/texmf/ls-R...
[2011-08-26 16:13] mktexlsr: Done.
[2011-08-26 16:13] upgraded gnuplot (4.4.2-2 -> 4.4.3-1)
[2011-08-26 16:13] upgraded gtkmm (2.24.0-1 -> 2.24.2-1)
[2011-08-26 16:13] upgraded gparted (0.8.0-2 -> 0.9.0-3)
[2011-08-26 16:13] upgraded gpgme (1.3.0-1 -> 1.3.1-1)
[2011-08-26 16:13] upgraded gpsd (2.96-1 -> 3.0-3)
[2011-08-26 16:13] upgraded graphicsmagick (1.3.12-1 -> 1.3.12-2)
[2011-08-26 16:13] upgraded grep (2.7-1 -> 2.9-1)
[2011-08-26 16:13] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
[2011-08-26 16:13] upgraded grub (0.97-17 -> 0.97-20)
[2011-08-26 16:13] upgraded gsl (1.14-1 -> 1.15-1)
[2011-08-26 16:13] upgraded vim-runtime (7.3.138-1 -> 7.3.266-1)
[2011-08-26 16:13] upgraded ruby (1.9.2_p180-1 -> 1.9.2_p290-1)
[2011-08-26 16:13] Updating desktop and mime database...done.
[2011-08-26 16:13] upgraded gvim (7.3.138-1 -> 7.3.266-1)
[2011-08-26 16:13] upgraded hdf5 (1.8.6-1 -> 1.8.7-1)
[2011-08-26 16:13] upgraded heirloom-mailx (12.5-1 -> 12.5-2)
[2011-08-26 16:13] upgraded htop (0.9-1 -> 0.9-2)
[2011-08-26 16:13] installed lcms2 (2.2-1)
[2011-08-26 16:13] upgraded imagemagick (6.6.9.4-1 -> 6.7.1.6-1)
[2011-08-26 16:13] installed iproute2 (2.6.39-1)
[2011-08-26 16:13] upgraded kbd (1.15.2-1 -> 1.15.3-1)
[2011-08-26 16:13] warning: /etc/inittab installed as /etc/inittab.pacnew
[2011-08-26 16:13] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2011-08-26 16:13] Blacklisting of modules is no longer supported in rc.conf,
[2011-08-26 16:13] please add blacklist entries to /etc/modprobe.d/ instead.
[2011-08-26 16:13] VERBOSE= in rc.conf no longer has any effect.
[2011-08-26 16:13] Please append 'quiet' to your kernel command line.
[2011-08-26 16:13] upgraded initscripts (2011.04.1-2 -> 2011.07.3-1)
[2011-08-26 16:13] upgraded poppler-glib (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:13] upgraded inkscape (0.48.1-2 -> 0.48.2-1)
[2011-08-26 16:13] upgraded irssi (0.8.15-4 -> 0.8.15-5)
[2011-08-26 16:13] upgraded jfsutils (1.1.14-2 -> 1.1.15-2)
[2011-08-26 16:14] upgraded jre (6u25-1 -> 7-3)
[2011-08-26 16:14] upgraded libdmtx (0.7.2-2 -> 0.7.4-1)
[2011-08-26 16:14] installed qrencode (3.1.1-2)
[2011-08-26 16:14] installed prison (1.0-1)
[2011-08-26 16:14] upgraded libedit (20110227_3.0-1 -> 20110802_3.0-1)
[2011-08-26 16:14] upgraded openssh (5.8p2-1 -> 5.8p2-9)
[2011-08-26 16:14] upgraded lm_sensors (3.3.0-1 -> 3.3.1-2)
[2011-08-26 16:14] upgraded xorg-xprop (1.2.0-2 -> 1.2.1-1)
[2011-08-26 16:14] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2011-08-26 16:14] installed libkexiv2 (4.7.0-2)
[2011-08-26 16:15] upgraded qscintilla (2.5.1-1 -> 2.5.1-2)
[2011-08-26 16:15] installed ocaml (3.12.1-1)
[2011-08-26 16:15] installed libkipi (4.7.0-2)
[2011-08-26 16:16] upgraded sane (1.0.22-1 -> 1.0.22-2)
[2011-08-26 16:16] installed libksane (4.7.0-2)
[2011-08-26 16:16] installed libkdcraw (4.7.0-2)
[2011-08-26 16:16] upgraded poppler-qt (0.16.4-1 -> 0.16.7-1)
[2011-08-26 16:16] upgraded libidn (1.21-1 -> 1.22-1)
[2011-08-26 16:16] upgraded qt3 (3.3.8-19 -> 3.3.8-20)
[2011-08-26 16:16] upgraded libktorrent (1.1.1-1 -> 1.1.2-1)
[2011-08-26 16:16] installed libmms (0.6.2-1)
[2011-08-26 16:16] upgraded libgadu (1.10.1-1 -> 1.11.0-1)
[2011-08-26 16:16] installed ortp (0.16.5-1)
[2011-08-26 16:16] installed mediastreamer (2.7.3-3)
[2011-08-26 16:17] upgraded qwt (5.2.1-1 -> 6.0.0-1)
[2011-08-26 16:17] upgraded neon (0.29.3-2 -> 0.29.6-2)
[2011-08-26 16:17] upgraded subversion (1.6.15-1 -> 1.6.17-6)
[2011-08-26 16:17] upgraded linux-firmware (20110227-1 -> 20110727-1)
[2011-08-26 16:17] upgraded mkinitcpio-busybox (1.18.2-1 -> 1.18.5-1)
[2011-08-26 16:17] upgraded mkinitcpio (0.6.11-1 -> 0.7.2-1)
[2011-08-26 16:18] >>> Updating module dependencies. Please wait ...
[2011-08-26 16:18] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-08-26 16:18] ==> Building image from preset: 'default'
[2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-08-26 16:18] ==> Starting build: 3.0-ARCH
[2011-08-26 16:18] -> Parsing hook: [base]
[2011-08-26 16:18] -> Parsing hook: [udev]
[2011-08-26 16:18] -> Parsing hook: [autodetect]
[2011-08-26 16:18] -> Parsing hook: [pata]
[2011-08-26 16:18] -> Parsing hook: [scsi]
[2011-08-26 16:18] -> Parsing hook: [sata]
[2011-08-26 16:18] -> Parsing hook: [filesystems]
[2011-08-26 16:18] -> Parsing hook: [usbinput]
[2011-08-26 16:18] ==> Generating module dependencies
[2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-08-26 16:18] 7278 blocks
[2011-08-26 16:18] ==> Image generation successful
[2011-08-26 16:18] ==> Building image from preset: 'fallback'
[2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-08-26 16:18] ==> Starting build: 3.0-ARCH
[2011-08-26 16:18] -> Parsing hook: [base]
[2011-08-26 16:18] -> Parsing hook: [udev]
[2011-08-26 16:18] -> Parsing hook: [pata]
[2011-08-26 16:18] -> Parsing hook: [scsi]
[2011-08-26 16:18] -> Parsing hook: [sata]
[2011-08-26 16:18] -> Parsing hook: [filesystems]
[2011-08-26 16:18] -> Parsing hook: [usbinput]
[2011-08-26 16:18] ==> Generating module dependencies
[2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-08-26 16:18] 23389 blocks
[2011-08-26 16:18] ==> Image generation successful
[2011-08-26 16:18] installed linux (3.0.3-1)
[2011-08-26 16:18] installed linux-headers (3.0.3-1)
[2011-08-26 16:18] upgraded koffice-servicetypes (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-libs (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-templates (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:18] upgraded koffice-plugins (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:19] upgraded koffice-krita (2.3.3-3 -> 2.3.3-5)
[2011-08-26 16:19] upgraded ktorrent (4.1.1-1 -> 4.1.2-1)
[2011-08-26 16:19] upgraded kwebkitpart (1.1-1 -> 1.1.1-1)
[2011-08-26 16:19] upgraded less (443-1 -> 444-1)
[2011-08-26 16:19] upgraded usbmuxd (1.0.6-2 -> 1.0.7-2)
[2011-08-26 16:19] upgraded libimobiledevice (1.1.0-1 -> 1.1.1-2)
[2011-08-26 16:19] upgraded libgpod (0.8.0-2 -> 0.8.2-2)
[2011-08-26 16:19] upgraded libgsf (1.14.20-1 -> 1.14.21-1)
[2011-08-26 16:19] upgraded liblqr (0.4.1-1 -> 0.4.1-2)
[2011-08-26 16:19] installed libreoffice-en-US (3.4.2-2)
[2011-08-26 16:19] installed libtextcat (2.2-8)
[2011-08-26 16:19] * see https://wiki.archlinux.org/index.php/LibreOffice
[2011-08-26 16:19] -------------------------------------------------------------------
[2011-08-26 16:19] LibreOffice has been split into several packages:
[2011-08-26 16:19] - libreoffice-common
[2011-08-26 16:19] - libreoffice-{base,calc,draw,impress,math,writer} - frontend applications
[2011-08-26 16:19] - libreoffice-{gnome,kde4} - desktop integration plugins
[2011-08-26 16:19] - libreoffice-{sdk,sdk-doc} - add-on and doc for programming using
[2011-08-26 16:19] the LibreOffice APIs and for creating
[2011-08-26 16:19] extensions (UNO components).
[2011-08-26 16:19] -------------------------------------------------------------------
[2011-08-26 16:19] * you need to install at least one libreoffice-langpack
[2011-08-26 16:19] * you may want to pacman -Ss libreoffice-extensions
[2011-08-26 16:19] to see what additional extensions are prepared to install
[2011-08-26 16:19] * it's recommended to install {hunspell,mythes,hyphen}-xx pkg
[2011-08-26 16:19] for spell checking
[2011-08-26 16:19] * make sure you have installed some ttf font (ttf-dejavu recommended)
[2011-08-26 16:19] installed libreoffice-common (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-base (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-calc (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-draw (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-impress (3.4.2-2)
[2011-08-26 16:19] installed libreoffice-math (3.4.2-2)
[2011-08-26 16:19] upgraded libwpd (0.9.1-1 -> 0.9.2-1)
[2011-08-26 16:19] installed libwps (0.2.2-1)
[2011-08-26 16:19] installed libreoffice-writer (3.4.2-2)
[2011-08-26 16:19] upgraded libreoffice-extension-ct2n (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] The jdk package is licensed software.
[2011-08-26 16:20] You MUST read and agree to the license stored in
[2011-08-26 16:20] /usr/share/licenses/jdk/LICENSE before using it.
[2011-08-26 16:20] Please relogin to include jdk in your PATH
[2011-08-26 16:20] installed jdk (7-3)
[2011-08-26 16:20] upgraded libreoffice-extension-diagram (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-hunart (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-nlpsolver (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-numbertext (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-oooblogger (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-pdfimport (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-presentation-minimizer (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-presenter-screen (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-report-builder (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-typo (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-watch-window (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libreoffice-extension-wiki-publisher (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded make (3.81-5 -> 3.82-3)
[2011-08-26 16:20] upgraded libreoffice-sdk (3.3.2-2 -> 3.4.2-2)
[2011-08-26 16:20] upgraded libsoup (2.34.1-1 -> 2.34.3-1)
[2011-08-26 16:20] upgraded libwebkit (1.4.0-1 -> 1.4.2-1)
[2011-08-26 16:20] upgraded links (2.3pre1-1 -> 2.3-1)
[2011-08-26 16:20] upgraded logrotate (3.7.9-1 -> 3.8.0-1)
[2011-08-26 16:20] upgraded luasocket (2.0.2-4 -> 2.0.2-5)
[2011-08-26 16:20] upgraded lzo2 (2.04-1 -> 2.05-1)
[2011-08-26 16:20] upgraded man-db (2.6.0.2-1 -> 2.6.0.2-2)
[2011-08-26 16:20] upgraded mdadm (3.2.1-3 -> 3.2.2-3)
[2011-08-26 16:20] upgraded mercurial (1.8.3-1 -> 1.9.1-1)
[2011-08-26 16:21] ERROR: Module nvidia is in use
[2011-08-26 16:21] In order to use the new nvidia module, exit Xserver and unload it manually.
[2011-08-26 16:21] upgraded nvidia-173xx (173.14.30-1 -> 173.14.31-2)
[2011-08-26 16:21] upgraded octave (3.4.0-2 -> 3.4.2-2)
[2011-08-26 16:21] upgraded openal (1.13-1 -> 1.13-2)
[2011-08-26 16:21] upgraded openbox (3.4.11.2-2 -> 3.5.0-3)
[2011-08-26 16:21] upgraded xine-lib (1.1.19-2 -> 1.1.19-3)
[2011-08-26 16:21] ==> Documentation and samples are in separate packages:
[2011-08-26 16:21]
[2011-08-26 16:21] * opencv-docs
[2011-08-26 16:21] * opencv-samples
[2011-08-26 16:21] upgraded opencv (2.2.0-5 -> 2.3.0-1)
[2011-08-26 16:21] upgraded oxygen-gtk (1.0.4-1 -> 1.1.2-1)
[2011-08-26 16:22] upgraded oxygen-icons-svg (4.6.2-1 -> 4.7.0-1)
[2011-08-26 16:22] upgraded p7zip (9.20.1-1 -> 9.20.1-4)
[2011-08-26 16:22] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2011-08-26 16:22] upgraded pacman-mirrorlist (20110324-1 -> 20110816-1)
[2011-08-26 16:22] upgraded pcmciautils (017-2 -> 018-1)
[2011-08-26 16:22] upgraded perl-text-iconv (1.7-5 -> 1.7-6)
[2011-08-26 16:22] upgraded perl-xml-parser (2.40-2 -> 2.41-1)
[2011-08-26 16:22] upgraded pkg-config (0.25-3 -> 0.26-1)
[2011-08-26 16:22] upgraded postgresql-libs (9.0.4-3 -> 9.0.4-4)
[2011-08-26 16:22] upgraded procps (3.2.8-3 -> 3.2.8-4)
[2011-08-26 16:22] upgraded python2-distribute (0.6.16-1 -> 0.6.19-1)
[2011-08-26 16:22] upgraded qtcurve-gtk2 (1.8.8-1 -> 1.8.9-1)
[2011-08-26 16:22] upgraded qtcurve-kde4 (1.8.7-1 -> 1.8.8-1)
[2011-08-26 16:24] upgraded qt-doc (4.7.2-1 -> 4.7.3-1)
[2011-08-26 16:24] >>> The kernel-mode plugin has a new place.
[2011-08-26 16:24] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
[2011-08-26 16:24] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
[2011-08-26 16:24] upgraded rp-pppoe (3.10-6 -> 3.10-7)
[2011-08-26 16:24] upgraded rrdtool (1.4.5-1 -> 1.4.5-4)
[2011-08-26 16:24] updating gtk.immodules... done.
[2011-08-26 16:24] upgraded scim (1.4.9-2 -> 1.4.11-1)
[2011-08-26 16:24] upgraded screen (4.0.3-11 -> 4.0.3-12)
[2011-08-26 16:24] upgraded skype (2.2.0.25-1 -> 2.2.0.35-1)
[2011-08-26 16:24] upgraded soundtouch (1.5.0-1 -> 1.6.0-1)
[2011-08-26 16:24] upgraded sudo (1.8.1.p1-1 -> 1.8.2-1)
[2011-08-26 16:24] upgraded syslog-ng (3.2.2-2 -> 3.2.4-3)
[2011-08-26 16:25] upgraded tcl (8.5.9-1 -> 8.5.10-1)
[2011-08-26 16:26] Updating font cache... done.
[2011-08-26 16:26] Note: terminus-font is in /usr/share/fonts/local/
[2011-08-26 16:26] upgraded terminus-font (4.32-1 -> 4.36-1)
[2011-08-26 16:26] upgraded tk (8.5.9-1 -> 8.5.10-1)
[2011-08-26 16:27] Updating font cache... done.
[2011-08-26 16:27] upgraded ttf-liberation (1.06.0.20100721-1 -> 1.07.0-1)
[2011-08-26 16:27] upgraded tzdata (2011g-1 -> 2011h-1)
[2011-08-26 16:27] upgraded usbutils (002-2 -> 004-1)
[2011-08-26 16:27] upgraded vi (050325-4 -> 1:050325-1)
[2011-08-26 16:27] Updating vim help tags...done.
[2011-08-26 16:27] upgraded vim-supertab (1.5-1 -> 1.6-1)
[2011-08-26 16:27] Updating vim help tags...done.
[2011-08-26 16:27] upgraded vim-vcscommand (1.99.42-1 -> 1.99.43-1)
[2011-08-26 16:27] upgraded wget (1.12-5 -> 1.13.1-1)
[2011-08-26 16:27] upgraded wine (1.3.19-2 -> 1.3.26-1)
[2011-08-26 16:27] upgraded winetricks (20110429-1 -> 20110629-1)
[2011-08-26 16:27] upgraded xcursor-themes (1.0.2-1 -> 1.0.3-1)
[2011-08-26 16:27] upgraded xorg-iceauth (1.0.4-2 -> 1.0.5-1)
[2011-08-26 16:27] upgraded xorg-util-macros (1.13.0-1 -> 1.15.0-1)
[2011-08-26 16:27] upgraded xorg-server-devel (1.10.1-1 -> 1.10.3.901-1)
[2011-08-26 16:27] upgraded xorg-twm (1.0.6-2 -> 1.0.7-1)
[2011-08-26 16:27] upgraded xorg-x11perf (1.5.3-2 -> 1.5.4-1)
[2011-08-26 16:27] upgraded xorg-xlsclients (1.1.1-2 -> 1.1.2-1)
[2011-08-26 16:28] upgraded xorg-xrandr (1.3.4-2 -> 1.3.5-1)
[2011-08-26 16:28] upgraded xorg-xwininfo (1.1.1-2 -> 1.1.2-1)
[2011-08-26 16:28] upgraded xpdf (3.02_pl6-1 -> 3.03-1)
[2011-08-26 16:28] upgraded xscreensaver (5.12-2 -> 5.14-1)
[2011-08-26 16:28] upgraded xterm (269-1 -> 271-1)
[2011-08-26 16:28] upgraded xulrunner (2.0.1-1 -> 6.0-2)
[2011-08-26 16:28] upgraded zsnes (1.51-7 -> 1.51-9)
/etc/rc.conf without any comments:
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Stockholm"
KEYMAP="se-lat6"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MODULES=()
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="archon"
interface=eth0
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
DAEMONS=(syslog-ng @network dbus preload !netfs @crond @cups @sshd @startntpd)
/etc/mkinitcpio.conf without any comments:
MODULES=""
BINARIES=""
FILES=""
HOOKS="base udev autodetect pata scsi sata filesystems"
Please let me know if you need to know anything else.
Last edited by Mogger (2012-03-30 23:33:38)I've temporarily fixed the problem by doing the following:
removed cryptsetup (1.3.1-2)
removed lvm2 (2.02.88-1)
removed mdadm (3.2.2-4)
removed linux (3.0.6-2)
upgraded mkinitcpio-busybox (1.18.5-1 -> 1.18.2-1)
installed gen-init-cpio (2.6.36-1)
upgraded udev (173-3 -> 167-2)
upgraded mkinitcpio (0.7.3-1 -> 0.6.11-1)
installed kernel26 (2.6.38.5-1)
upgraded nvidia-173xx-utils (173.14.31-1 -> 173.14.30-1)
upgraded nvidia-173xx (173.14.31-2 -> 173.14.30-1)
upgraded initscripts (2011.07.3-1 -> 2011.04.1-2)
upgraded net-tools (1.60.20110819cvs-1 -> 1.60-18)
I also restored my old /etc/mkinitcpio.conf, /etc/inittab and /etc/rc.conf.
I'm still interested in a solution to the original problem. Is it a problem with my configuration, the new kernel, the udev version or something else?
The difference in inittab is just a -s option and the mkinitcpio.conf files are the same except for some comments. rc.conf has the biggest changes and is now (removed comments):
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Stockholm"
KEYMAP="se-lat6"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
MOD_AUTOLOAD="yes"
MODULES=(!usblp !pcspkr)
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="archon"
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
NETWORK_PERSIST="no"
DAEMONS=(syslog-ng @network dbus preload !netfs !wicd @crond @cups @sshd @startntpd)
Last edited by Mogger (2011-10-11 14:04:20) -
Windows 7 very slow logon, Waiting for the User Profile Service, winlogon event 6006
Hello,
Every so often one of our Windows 7 clients which is not normally having any delay at logon will take a very long time to login. This may be 10 or 20 minutes or up to an hour in some cases.
Typically the event log will contain entries like
The winlogon notification subscriber <Profiles> took 572 second(s) to handle the notification event (Logon).
There is no further information available from Event Log Online Help, nor any additional detail as to why the logon event was so slow. During the delay the user will just see "Waiting for the User Profile Service" on their screen.
We first started seeing this problem with Windows Vista and if anything the situation has not improved since then. It has never happened with any of our Windows XP users.
We are currently planning a migration of computers to Windows 7 but stuff like this which has not been resolved in Windows over a 2 year period will stall that migration. The least improvement is to increase the event notification to give a lot more
information on why the user profile processing has stalled.Hi,
When did the issue begin to occur? Did it occur after installing certain application or applying certain policy?
To troubleshoot the issue, please perform the following step.
1. Restart the machine in Safe Mode with Networking to check whether the system can login quicker.
2. Type “gpedit.msc” in Search box and press Enter. Navigate to the following location:
Computer Configuration->Administrative Templates->System->Logon
Please double click “Always wait for the network at computer startup and logon” policy and disable it.
3. Perform a
Clean Boot to check the result.
Thanks,
Novak -
Filter causes browser to wait for more data
Using the J2EE RI, I notice that under certain circumstances my filter causes IE 5.5 and Netscape 4.7 to spin, waiting for data which doesn't exist, after my page has been fully recieved. My filter simply replaces the HTTP output stream with it's own, chains the request, and then reads the length of the response before passing it through unmodified.
The odd thing is that one must call response.getWriter() before chaining, otherwise the waiting behavior occurs. Can anyone explain this, or suggest a tool to snoop on the response headers, or point me toward documentation of this behavior?
Thanks,
JamesHi, I've got the same problem!
If you have solved the problem, would you tell me how, please? -
Cloned volume gets stuck at boot "Waiting for Network File System"
I've used "Carbon Copy Cloner" many times with success and no problems (v 2.3 , default settings, make destination bootable) as I migrated to larger drives or make backups in advance of a major OS upgrade.
Last time I was successful, I was at OS 10.3.5. I use 3rd drive to boot my Mac, then clone the one non-boot drive to the other. I do the disk repairs & permission repairs as the normal course of this process, before & after. I am now at 10.3.9. I am do this clone in prep to go to 10.4 so I have a good back in the event of later problems.
When I attempt to boot from the newly cloned partition, it goes fine on the boot process until it hangs at the "Waiting for Network File System" step and never gets past there. I've never had this happen before. I retired all the steps, even ran "Diskwarrier", but no change.
I am not trying to run from a remote or network drive, just a 2nd drive in my
G4 from which I have previously been able to boot (until this last clone attempt that is).
I googled the symptoms ""Waiting for Network File System"", found it to be common, but no real answers. Is this one of those annoying UNIX things? Any ideas how to fix / turn-off whatever is hanging the boot up? Thanks in advance!Hi Kool,
So there seems to be a "speed-bump" around 10.3.9. No wonder I have had the same results with a different tint. I went to Drive Genius to clone this one. Results with that were interesting.
If I did a [Device] clone, it would take and show at start with 'option' key... and work just like my internal with 3 accounts on it... login and proceed like it was internal. If I did a [Volume] clone, it would not show up at start with the 'option' key... I'd have to boot it from System Preferences > Start-up Drive. Once booted, it had no login screen so all the files were accessible. I took the clone of this 3 account PB and tried it on an iBook. Had to boot from System Preferences too, also, all the account were accessible from that machine... implying that anyone who had that drive could get past/into my files that would be secure on my computer, but not on the clone. If I took the [Device] clone and booted from the ibook at start with the option key, it would not get past the login screen... altho the mouse worked and I could click on the name, that was as far as it got, Froze.
So, I have figured, for safety, a [Device] clone is it, as long as the original computer lives. The safety features for login seem to be hardwired in the chip that the clone was made from (The iBook had 2 accounts but not my 3). If safety is not an issue, the [Volume] clone is fine... like moving to a newer OS on the same computer. It would seem from your experimentations that the situations with this 10.3.9 is just a hick-up and is solved in 10.4.3 with CCC v3...
Thanks for your info... I am thinking of going to Tiger, but I am so fond of this Panther...
Bo -
I've had my i7 for a few weeks and while I love it I can't help but wonder why it seems to take about a minute to boot up. Everything seems to work just fine, but the boot-up seems to take longer than it should, especially for something that's supposed to be so fast. Just curious if anyone else has had this sort of issue with their i7.
HI,
In order to assist you, could you please take a moment and click My Settings on the right side of this window and tell us which iMac you have and which Mac OS X it's running. That way we have your forum profile to go by for now and in the future. Thank you.
Open System Preferences/Accounts - Login Items. If you have any apps listed there to launch when you boot your iMac, delete them and see if it makes a difference.
Also, go to /Library/Startup Items. Move any files in the Startup Items folder to the Trash.
Boot from your install disk and run Disk Utility.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Repair disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn -
HP G62 Battery causes slow boot - take battery out and boots normally - HP G62-340US Notebook
All,
Very strange thing going on, and I've not seen it on these forums, so here I go.
Turn on laptop, the HP screen appears, and about 20 minutes later, Windows starts loading.
Turn off laptop, pull the battery, turn on the laptop, and Windows starts loading within 10 seconds (normal).
When the battery is in, EVERYTHING takes 15-20 minutes to start. If I select F2 for settings, it takes that long. If I hit F10 (or possibly F8), same delay. If I take the battery out, it works perfectly.
So....I of course assume bad battery......but I've never seen this type of behavoir in ANY computer previously.
Any suggestions?
HP G62-340US Notebook
Windows 7 Home Premium
No error message and no changes made to system.
Thanks
DonlenHi
Have you tried to run the Start up test from F2 option did they pass.
Please update the Bios, Graphic & Chipset driver from the HP website and have it checked.
Hi
Try this:
Disconnect AC
Shutdown
Remove battery
Connect AC
Startup
Open Device Manager
Click the plus (+) sign next to Batteries category, right-click All of the "Microsoft ACPI Compliant Control Method Battery" listings, and select Uninstall In the "Confirm Device Uninstall" dialog box, click OK. (it’s ok if you only have 1 of these listings).
Click the plus (+) sign next to System Devices.
Right-click the “ACPI Fixed Features Button" and select Uninstall. In the "Confirm Device Uninstall" dialog box, click OK.
Shutdown
Disconnect AC
Insert battery
Connect AC
Startup
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Win XP slow boot problem solved
Hi guys,
Just want to share my discovery re: slow boot.
For Win XP Pro users with 1 HDD:
1. Go to Device Manager
2. Select IDE Controller
3. Select Primary Channel (assuming HDD is connected to IDE1 which according to the MSI manual should be the case)
4. Click on the Advance Setting Tab
5. On Device 1, Select None for Device Type and click OK
6. Wait for a while because it takes some time for the window to close
And that's it !!! I did tried the bootvis optimization first but only about 5 seconds were taken off from the start up. I also took out the jumper in my WD HDD and even replaced my IDE cable. Before my discovery, it took 2 mins to boot my PC. Now it only takes 30 sec (i.e., from Win XP logo to desktop).
Hope it works for you guys. Good Luck !!!Great tips for the ATA HD from Artic .
But for SATA the device cannot be change.
Anyway thanks for the great tips Artic.
Casing Tt Xaser III Skull
M/B 865 PE Neo-2 PFS Platinum Edition Bios Ver.3.6
CPU:P4 2.4C (HT enable) and ThermalTake SubZero 4G
(DOT Rank=Commander,Turbo,2395 mHz - 2760 mHz)
Memory: Corsair XMS 3500 2x512 meg (dual-channel dimm 2 and 4)
VGA:ELSA Gladiac 925 Ti4600
HD:2 SATA Maxtor 80gig and 1 ATA Maxtor 80Gig
CD/RW Yamaha and Pioneer DVD
PSU:ThermalTake Silent PurePower 480W (W0010/Black)
+5 V/40 A, +3.3 V/30 A, +12 V/18 A, -5 V/0.3 A, -12 V/0.8 A, +5 VSB/2 A Peak Load 550 W
Window XP PRO SP1
NEC FP2141SB
Microsoft DesktopPro
Sound Blaster Audigy 2 Platinum + Klipsch Promedia 4.1 -
"Waiting for RAID Controller F/W to become ready..."
Hello
Lately I have been getting this message more often than not -- before Windows 7 (not) booting: "Waiting for RAID Controller F/W to become ready..."
Any suggestions?
I have a
Areca ARC-1680D-IX 12-ports SAS RAID
Thanks
RowbyWe sell and use these now:
http://www.intel.com/products/server/raid-controllers/RS2BL080/RS2BL080-overview.htm
http://www.intel.com/products/server/raid-controllers/RS2PI008/RS2PI008-overview.htm
But they have more here: http://www.intel.com/products/server/raid/index.htm
They also use LSI chips like Areca and Atto.
Eric
ADK -
I got a 4 GB mem kit from Crucial the other day and installed it into my 17" MBP. The computer runs fine once booted, but it takes twice as long to boot as it did on the original 2 GB. Roughly under a minute to at least a minute and a half. Should extra ram cause slower booting?
Yes; the MacBook Pro checks the installed RAM every time it is turned on, and the check takes longer with more RAM.
(28271) -
Slow startup time for JDeveloper 9i
The JDeveloper 9i release candidate takes a long time to startup. The pop-up window for method completion is also much slower than JBuilder 5.0. And I am using a 1.2 GHz P4 machine. Is it possible to speed up the startup time (maybe by making it not load certain libraries, such as XML editor, UML editor, etc.)?
Thanks
RoshanThis is a problem caused by references to files / URLs on
remote systems which are slow.
In particular, having projects with Remote Files/URLs in them
can cause slowness.
Same for Libraries - Having too many libraries or libraries with
remote links can slow down the system.
Look carefully at your project's Libraries and be sure you are
not including everything
Also see your project and make sure the files are all available
locally.
Let me know if this is the problem or not,
-John -
Cannot boot -- 10.6.7 update causes endless "waiting for DSMOS"
I have an iMac 10,1 purchased 10 months ago. I ran the 10.6.7 combo update today and after clicking 'restart', I only got the Apple logo with the spinning gear (grey screen). I booted into verbose mode and discovered that it is hanging at "Waiting for DSMOS..." indefinitely, or I should say for at least 2 hours. I reset PRAM and SMC, I repaired the disk and fixed permissions in Disk Utility, and I rebuilt volume using Disk Warrior. Nothing has changed.
I can boot into single user mode and I tried a few of the terminal commands that are supposed to fix this, but nothing worked. Specifically, I tried "chown root:admin /" but got an error that the filesystem was read-only.
I would love to hear if anyone has ideas!
knormGretchen Brant wrote:
No one seems to want to acknowledge that major problems have happened after this update.
Major problems occur for some users after every update. There are a number of possible causes for this, most not having anything directly to do with the update itself but instead with the state of the user's Mac before applying it. Discussions board users collectively have a pretty good track record for solving these problems, but mostly just for users willing to provide enough info for other users to get an idea of which possible causes might be involved.
Let's keep in touch for possible solutions--and if you see others with post-update problems we need to band together so they (Apple and some board experts) will take notice of this trend and find out what's wrong.
Please review the Help & Terms of Use link provided on every Discussions page. As it explains, Apple does not provide any official technical support in Discussions & the board moderators may or may not have time to forward anything about any issues discussed here to the Apple divisions that can do anything about it. Their principle job is to make sure posts abide by the ToU, & they are usually pretty busy doing that when updates are issued. (Updates historically generate a lot of posts that ignore or violate the ToU, like by <ahem> posting polls or petitions.)
If you want to get the attention of Apple about any issue related to an OS X update, use the form provided at http://www.apple.com/feedback/macosx.html, & be sure to provide as much detail about the issue as you can.
If you are looking for solutions from either Apple or other users, the best way to get noticed is to provide clear, relevant details about the problem. "Similar problems" is just not enough to work with.
Message was edited by: R C-R
Maybe you are looking for
-
Networking two mac pros together?
i just bought a 2012 and did a fresh install of yosemite and have a 2006 that is running lion. i have migrated my data over to the 2012 and plan to wipe the 2006 of the data so i don't get confused. i expect to have a number of backups on the shelf a
-
JDev 10g and Variable Highlighter
In the production version of JDev 10g, Variable Highlighter extension(http://home.t-online.de/home/simeon.zverinski/variablehighlighter/index.html), which is so much useful, does not work properly. Quick navigation between variable occurrences functi
-
Hello, I've been trying for quite some time to get a computer that acquires data and stores it to an array to send the data to another computer via TCP/IP using a crossover cable. The two computers send commands and information back and forth to each
-
Liquidity forecast Downpayment For Sales order
Hi gurus, When i post down payment for sales order with special indicator "a" system does not decrease sales order amount at liquidity forecast(FF7B). Is it a system bug or are down payments does not considered for sales orders like purchase orders?
-
Freeing up space now that i have itunes match...
Can I delete all the music off of my iphone to free up space now that i've got all my music on the cloud with itunes match? Even the stuff I downloaded from itunes with my phone? I'm just paranoid about clicking delete and loosing anything. Thanks