Netgear DG834g-v3 ios 6.0.1 issue?

Hi
This is a bit puzzling
A freind asked me for help with his iPads his & his wifes
They both have 16gb wifi +3g with retina display they dont use the 3g they keep it switched off
After the ios 6.0.1 update they got this mad problem.
When they first turn on their ipads not from sleep but switching on they cant slide to open until the screen goes to sleep, when I looked it seems a though its freezing until the screen goes off, but by pressing the home button it would make the screen turn off then pressing it again you could open it it worked fine after that.
Thing is when they're not using them they power them down to save battery they like the fact the battery lasts for days without charging
I thought a quick reset would do the trick, nope i then did a full reset in iTunes holding the home & power button putting into recovery, nope still didnt fix it as it was both i did them both that didnt solve it either
I sent them up to the local Apple store where they tried this also, they ended up swapping them this fixed the problem for a while
Both iPads they replaced had ios 6,0 on them, his wife updated hers first to 6.0.1 this worked fine but when he updated his the issue returned.
His wifes worked ok for a day then it came back the only difference was when they updated on his wifes one on set up they selected not to use Siri where he did, so we put it back into recovery mode then didnt select Siri on set up but this didnt fix it either
Finally i get to why i think its the router it seems to be freezing while trying to connect to the network its the only thing common to both ipads after the update they didnt restore from any backup or even plug them into itunes
I know its a long one i apologize so thanks for reading
Any help or even ideas greatly appreciated
Thank you

I feel your pain. Since updating to 6.0.1 I've had various problems, like the phone spontaneously rebooting itself when I move home screen icons. But the most egregious is the problem of not being able to be heard by callers. I discovered that if I switched to speaker I was able to be heard.
There was no physical damage to the phone and the Genius said diagnostics showed it was a software problem.  They replaced the phone because no troubleshooting methods worked.  Then with the new phone I had the problem of the app store crashing each time it tried to access Purchases, another software problem.  Apple replaced the phone again.
When the Apple Genius helped me set up the new Phone, I chose to set it up as new and not update the iOS from 6 to 6.0.1.  It has been working without a glitch so far.  I will avoid syncing with iTunes until I'm confident the bugs are worked out of 6.0.1.
Btw this is the 4th iPhone 4s I've had within a year due to defect  Things appear to be going downhill with Apple products.

Similar Messages

  • Hi there, I have just bought an ipad4 but it will not connect to my internet. I have tried every suggestion going to no avail. My netgear DG834g router is fairly old , do you think this is the problem? I am at a loss now and very frustrated!

    Hi there, I have just bought my first ipad4 and have spent all weekend trying to connect to the internet. I have tried all Apple suggestions to no avail
    . My Netgear DG834g router is a few years old now. Do you think this may be the problem? Do they have compatibility issues after a while? My ipad upgrade is IOs 6. I am at a loss what else to do and needless to say extremely frustrated!
    Thanks.

    First check that your router has its latest firmware.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
    Since you are a new iPad user .....
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download an iPad User Guide to the iPad from the iTunes store.
     Cheers, Tom

  • IOS 8.1+ Performance Issue

    Hello,
    I encountered a serious performance bug in Adobe Air iOS application on devices running iOS 8.1 or later. Approximately in 1-2 minutes fps drops to 7 or lower without interacting with the app. This is very noticeable in the app. The app looks like frozen for about 0.5 seconds. The bug doesn't appear on every session.
    Devices tested: iPad Mini iOS 8.1.1, iPhone 6 iOS 8.2. iPod Touch 4 iOS 6 is working correctly.
    Air SDK versions: 15 and 17 tested.
    I can track the bug using Adobe Scout. There is a noticeable spike on frame time 1.16. Framerate drops to 7.0. The App spends much time on function Runtime overhead. Sometimes the top activity is Running AS3 attached to frame or Waiting For Next Frame instead of Runtime overhead.
    The bug can be reproduced on an empty application having a one bitmap on stage. Open the app and wait for two minutes and the bug should appear. If not, just close and relaunch the app.
    Bugbase link: Bug#3965160 - iOS 8.1+ Performance Issue
    Miska Savela

    Hi
    Id already activated Messages and entered the 6 digit code I was presented with into my iPhone. I can receive txt messages from non iOS users on my iMac and can reply to those messages.
    I just can't send a new message from scratch to a non iOS user :-s
    Thanks
    Baz

  • Just updated to IOS 7 and two issues:  First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

    Just updated to IOS 7 and two issues: 
    First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".  I'm not sure what this really means...
    The second issue is when I try to select "Manually Manage Music"
         The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC".  Do you want to erase this iPhone and sync with this iTunes library?  An iPhone can be synced with only one iTunes library at a time.  Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
    So... I don't want to do that, but I do what to be able to Manage my music.  I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
    Anyone have any ideas?

    I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

  • Netgear DG834G setup with Airport Extreme Base

    Until yeseterday my home network consisted of an ADLS modem connected by ethernet to an Airport Extreme base, to get additional range I have an additional Airport Extreme Base downstairs ( life before ap express). I also have a USB printer in the 1st base - all was good and life was wonderful.
    Then..... the adsl modem/router died. It was recommended that I get the Netgear DG834G as it was easy to setup blah blah blah... Long story short it is set up and I do have internet access wirelessly to part of my house - the range is terrible. I would like to use the two airport base stations I have to get acceptable coverage and also to use my printer via the USB again.
    Can anyone please tell me how to make the airport bases talk to the Netgear. BTW ... Base #1 is sitting next to the Netgear box so if it needs to be connected by ethernet it is no problem.
    Thanks much Susan

    You can connect your AirPort Extreme base station (AEBS) to the Netgear via Ethernet. Configure the AEBS so that the option to distribute IP addresses is disabled.

  • Netgear DG834G and Airport Extreme ?

    I've done a few searches and I just need this confirmed ...
    I've got a Netgear DG834G Wireless Modem router and an Airport Extreme and would like to get them talking to each other - which I thought I did last night ! - so i can have the ADSL connection in one room shared out over wireless to the AE connected to a G4 via one of it's ethernet ports ...
    I have read that the Airport Express and a Netgear device is not compatible with Apple's WDS - does that apply to the Extreme as well ?
    Is that correct as when I checked the log on the airport it had made a connection with the netgear but I couldn't for the life of me organise a proper network between them !
    Any suggestions appreciated...
    I've been using the Airport for ages so not a real newbie... BUT... getting them to do what I want is proving an interesting project !
    Mitch

    Personally I wouldn't go for a USB adaptor as they are pretty ropey at best. You can get Wireless to Ethernet bridges that join an existing wireless network and provide an ethernet connection. They don't require WDS support as they pretend to be a client on the wireless network. Netgear even do one (allthough as you probably guessed I'm not a keen Netgear supporter).
    The other possibility is if it is a G4 desktop that has PCI slots a Broadcom based PCI wireless card will be automatically recognised as an Airport Extreme card by OSX and can be picked up cheap on eBay.

  • IOS 8.3 Airplay issue

    I have an iPad Air 2 and iPhone 6+, both are upgraded to iOS 8.3 recently.
    I've noticed when I am using Airplay to watch web content, usually a short video on a web page, the airplay would gut out randomly (every 3-5 minutes or so). When this happens, the video continues to play on the iPad or iPhone, but seems Airplay connection was dropped. Before the upgrade, those videos were playing on my apple tv streaming from my iPad Air 2 and iPhone 6+ perfectly. I did check my apple TV software, it says no update available.
    Anyone else have seen this issue, or have reported similar issue to Apple? Looks like an iOS 8.3 specific issue to me.

    Greetings bgeiOS,
    If you are having an issue with losing AirPlay connection during use from your iOS devices, I would suggest that you troubleshoot using the steps in this article - 
    Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
    In particular from the section titled If your playback is interrupted, or you have network lag -
    You might notice these issues if you have a weak Wi-Fi signal or interference from a different device, like a microwave or baby monitor. Try these steps:
    Make sure that you're using the recommended settings for your Wi-Fi router.
    Move or turn off other devices that might cause interference.
    Try connecting your Apple TV directly to the router using an Ethernet cable instead of Wi-Fi.
    Some apps might stop AirPlay when you lock your device or put your device to sleep.
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • Airport Express & Netgear DG834G 54Mbps Wireless ADSL Modem Router

    Could you offer any advice as to whether an Airport Express could be used as a range extender for an existing Netgear DG834G 54Mbps Wireless ADSL Modem Router setup as I really like the idea of Airtunes and sharing a USB printer. I gather that it is possible to use an Airport Express to extend the range of an Airport Extreme basestation setup but have not been successful in finding any info regarding the Netgear.
    Any info gratefully received !
    G5 Dual 2.3Ghz   Mac OS X (10.4.6)  

    mac-junkie, Welcome to the discussion area!
    No it can not be used as a range extender.
    But you can still use it for music and printer support. See KB 302153, AirPort Express: How to join an existing wireless network in client mode.

  • Netgear DG834G Problem connecting iMAC G5

    Hi,
    Wondered if anyone could assist me in this.
    Netgear Router DG834G / 3 Pcs all set up on Network / added a iMac G5 (Intel/10.4.4) at w/e but with problems - mainly it says it is connected to Netgear but will there is no connection to the internet (when going into Safari).
    Stumped by this - I have set TCP/IP address etc ip (192.168.0.5) etc...it is connecting to the Netgear router - but that's as far as it goes.
    I have connected via the ethernet cable from the iMac to Netgear DG834G Router - this works fine but knocks off all the other PCs connections. (The connection is still registered (i.e.signal present) but will not log on to any sites etc.
    If you can suggest anything it would be much appreciated - I am completely stuck !
    Many Thanks in Advance.

    Hughxxx, Welcome to the discussion area!
    ...added a iMac G5 (Intel/10.4.4)...
    You do not have an iMac G5. You have an Intel iMac. Those are discussed in the iMac > iMac (Early 2006) > Internet, Networking and your iMac discussion area.
    ...I have set TCP/IP address etc ip (192.168.0.5)...
    Why did you not use DHCP? Try that.
    What you are describing is usually a DNS problem. Setting the Network preference to DHCP should solve it. If not see KB 106798, Mac OS: Troubleshooting "A connection failure has occurred", "The specified server could not be found" or Similar Messages.

  • TS4002 iOS 6.0.1 issues

    i completely lost access to mail after installing iOS 6.0.1. It won't even open now.

    So to confirm, you have done the following?
    1- Hard Reset device.
    2- Restarted device.
    3- Reset Network Settings.
    4- Reset All Settings
    5- Restored as New and then trialed issues without having ANY person data on the device.
    If you HAVE done all those steps, then have device replaced.
    If you have NOT done all those steps, do them, then let us know what happens when they have been done, possibly in a less pretentious and ranting way, realising that a) we are fellow users, we have no control over the situation, so complaining to us does nothing to help you, and b) Dropping game titles and using the FAR too used "Steve Jobs must be..." line does not give you the appearance of intelligence, but someone who's phone doesn't do what they want it to do, and thinks they're the center of the universe because of it.
    We realise that there are thousands of results when you search "iOS 6.0.1 issues" in google, but what YOU have to realise is that the results will include duplicate results within single threads, are related to multiple different devices, and in some times use a VERY loose search terms (you may find results like "What issues do you think will be in iOS 6.0.1" as a forum thread) because you have made a broad search.

  • Netgear DG834G and HP Photosmart 6520

    Hello,
    I've just bought HP Printer Photosmart 6520 .
    I can marvelously print through USB, but when I try to use Wifi, it doesn't work.
    Wifi configuration seems to be good from the printer : an IP is set correctly on my local 
    network (Netgear DG834G router)
    But from any PC , I cannot ping and obviously print on the Wifi IP address of the printer.
    Is there any specific setup to do on the router , in order to use printer wirelessly ?

    Hi there , Welcome to the HP Community   I noticed your posts and wanted to reach out to you! After checking the drivers and downloads webpage to see the available drivers for your Photosmart 6520, there is currently no Windows 10 drives available for your printer. I will include the link below for you to check up on the drivers available.HP Photosmart 6520 e-All-in-One Printer As for your second post, I am unclear of what exactly you are trying to do with the printer setup. Please let me know more detail about what you are looking for.  Enjoy your Monday! Say "thanks" for the reply by clicking the thumbs up below!

  • Netgear DG834G and WPA

    I am currently using a Netgear DG834G wireless ADSL router with WEP and a PowerBook G4. I am trying to use WPA instead of WEP but I am having no luck. I switch the router over to WPA-PSK and set a password, I then try and connect to it from the PB using WPA Personal but just get an error message on the PowerBook, 'error trying to connect to network'. Currently I have SSID turned off, the router has the latest software installed as does the PowerBook. Is it possible to use WPA with a Netgear DG834G and a Mac PB?
    WEP is working with no problems.
    Phil

    I encountered this same problem on my Intel Mac when I did the upgrade to 10.4.9. My Netgear router worked fine before the upgrade. I haven't seen anyone with this problem on a G4 before, but there have been lots of reports of problems with Intels. Are you really running 10.4.1 as it says in your footer?
    Anyway, here is the only workaround I have found: Go into the router and disable password protection. Mine now works. I'm hoping that Apple will fix the problem, but apparently hasn't happened yet.
    Jon

  • Netgear DG834G and time capsule

    I've ordered a Netgear DG834G and a Time Capsule. Since the Netgear has only G capability while the TC has N, I wonder if it will be possible to use the Netgear connected to the TC at its full bandwidth for HD sharing. I've seen similar posts on this board but haven't understood about this specific question. Thanks.
    Message was edited by: tago

    Yes, this can be accomplished and it is known as a "dual-band" network. You can set it up by either having the Netgear or Time Capsule (TC) directly connected to your modem. As an example, I will assume that you will have the Netgear connected to the modem. In this case, you will connect the TC directly to one of the available LAN ports on the Netgear using an Ethernet cable and connect this cable to the TC's WAN port. The TC will need to be reconfigured as a bridge to allow the Netgear to provide both NAT & DHCP services for both routers' clients.
    You will then give each wireless network a unique Network Name/SSID and configure both to operate in different radio modes. In this configuration, "n" clients would connect to the TC and "g" clients would connect to the Netgear.

  • Netgear DG834G and Airport Express

    Hello,
    Can anyone help me? I've just upgraded to a Netgear DG834g Wireless ADSL router. This is connected via ethernet to my G5, and my iBook and girlfriends Powerbook connect to it wirelessley.
    Setting all this up took minutes. So far so good.
    BUT, I cannot get this to talk to my Airport Express.
    In the Netgear setup, I have added the AE to the 'Trusted' list (I used the MAC address on the side of the AE unit), but nothing will detect it.
    I've tried using Airport Setup utility on both the iBook and the Powerbook but neither device can see it.
    The amber light on the AE just flashes. I've even done a factory reset on it, but still no joy.
    I've read through some posts on here and I can see that folks have managed to get these two devices talking to each other, but what I want to know is How? Have I missed something obvious?
    Please help....
    BTW, I'm using OS X 10.4.2 on all machines.
    Many thanks

    Panic over - the AE needed a hard reset, and re-configuring through Netgear set up, and AE setup utility.
    All working fine now.

  • Airtunes with Airport Express - web with netgear DG834G?

    i have a netgear DG834G router which i use to connect to the web (and if you're reading this is it is working . I want my Airport Express to play airtunes, whilst i browse the web. I cannot even get airport Express to join the netgear network (in fact the netgear network doesn't even appear in the airport admin utility list). Any one able to shed some light on what appears to be a simle problem?

    Ok, let's double-check your AX's settings ...
    Perform a "factory default" reset of the AX
    o (ref: http://docs.info.apple.com/article.html?artnum=108044)
    To set up AirTunes on the AirPort Express Base Station (AX), temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
    AirPort tab
    o Base Station Name: <whatever you wish or use the default>
    o Wireless Mode: Join an Existing Wireless Network (Wireless Client)
    o Wireless Network: <select the existing Netgear wireless network>
    Music tab
    o Enable AirTunes on this base station (checked)
    o Enable AirTunes over the Ethernet port (optional)
    o iTunes Speaker Name: <whatever you wish>
    o iTunes Speaker Password (optional)
    In iTunes:
    iTunes > Preferences... > Advanced > General
    o Look for remote speakers connected with AirTunes (checked)

Maybe you are looking for

  • AS2 Receiver Error: MIC not verified # unexpected-processing-error

    When sending out a test message using Seeburger AS2 receiver channel I get the following error: MIC not verified # unexpected-processing-error So obviously this problem is related to digital signature I think? However I get the same error even if dig

  • Is chroma bug solved in new version of AME5.5 when transcoding to ProRes?

    About a year ago I had posted to the forums about a "chroma bug" observed by me and others when using Adobe Media Encoder v.5.0.1  to transcode AVCHD to Pros Res 422.   It would result in chroma bleed and a softer image versus a sharper transcode usi

  • BI Scheduler - remove Telephone Settings from users

    Hi I upgrade to obiee 11.1.1.6.2 BP1. In 10G I set up system subject area to set a mail address in all profiles of my users. In 11G I kept the system subject area but I'm not sure if it's really getting the details from there. I also configured AD-Au

  • New Editor, no breadcrumb

    Hi, the old BC editor had this nice breadcrumb at the bottom to show all tags, a text is wrapped into. One could simply click the "remove tag" link right to the breadcrumb to get rid of redundant markup (p > p > strong > font > font). Is there any si

  • IOS 5 Airplay bug discovered

    I've been having a vexing problem whereby if I send sound via AirPlay to one of my Airport Expresses the "Ringer and Alert Volume" always resets to 4. This seems to be an issue with older generation Airport Expresses. I was not able to try it with a