Netgear DG834N and Airport Express

I have a network set up on my Netgear DG834N wireless router/modem. Can I 'add' an Airport Express base station to the same network and play iTunes through my speakers? At the moment it's on it's own network and that is far from ideal.
thanks
Jeff

Welcome!
Open Hard Drive > Applications > Utilities > Airport Utility
Click on your AirPort Express and there is a guided step by step to walk you through the process.
Basically, you want to "join" the network that the Netgear is creating by selecting the name of the network, security and passord. iTunes is enabled by default. You will need to assign a name to your Express and a device password, etc.
Post back if you need more information.
The Setup Guide may help as well.

Similar Messages

Netgear DG834G and Airport Express

Hello,
Can anyone help me? I've just upgraded to a Netgear DG834g Wireless ADSL router. This is connected via ethernet to my G5, and my iBook and girlfriends Powerbook connect to it wirelessley.
Setting all this up took minutes. So far so good.
BUT, I cannot get this to talk to my Airport Express.
In the Netgear setup, I have added the AE to the 'Trusted' list (I used the MAC address on the side of the AE unit), but nothing will detect it.
I've tried using Airport Setup utility on both the iBook and the Powerbook but neither device can see it.
The amber light on the AE just flashes. I've even done a factory reset on it, but still no joy.
I've read through some posts on here and I can see that folks have managed to get these two devices talking to each other, but what I want to know is How? Have I missed something obvious?
Please help....
BTW, I'm using OS X 10.4.2 on all machines.
Many thanks

Panic over - the AE needed a hard reset, and re-configuring through Netgear set up, and AE setup utility.
All working fine now.

Netgear N600 and Airport Express working together... Any ideas???

My Netgear N600 daulband router just started giving me problems the last few days. So thinking I needed a new router I decided to go with an Airport Express. I ordered it and it's on the way. Now after swaping out the power supply cord on the Netgear it's working fine again. (the problem was in the power cord) Since I have the Airport Express coming I was wondering how I could use it with my Netgear N600 router. I have two Apple TV units and also use wifi with my ipad and iphone and laptop (non-apple).
Is there a way I can use the Airport express to extend my wifi thru out the house? Any ideas or thoughts on this? Should I just send it back? Open to all ideas. Thanks

So Bob let me ask you this, are anyone else that may have any ideas. Should I hook up the Netgear router first then wire the Airport Express to it, or the Airport Express first then wire the Netgear router to it. Will it make a diffrent? I think the Netgear N600 is faster, 600 vs 300. Any thoughts on this?
Thanks

Netgear router and airport express

hi
could someone please help me and tell me(in very simple terms!) how to extend the range of my network. my mini mac is too far away from my netgear DG834GT router and have been trying for days to use a/ex to reach it.Have tried everything i know which i freely admit isnt much but airport utility doesn't seem to see the router. i have seen people having similar problems but am hoping someone is out there to take me through it in words of 2 syllables or less! help

charlie117, Welcome to the discussion area!
The Netgear device is not compatible with Apple's WDS. Therefore there is no way to use your AirPort Express (AX) to wirelessly extend the range of the Netgear.
You could run an Ethernet cable from the Netgear to the AX. Then the AX would create a wireless network at it's location which would be an extension of the Netgear's network.

Netgear DM111P and Airport Express

i just had the displeasure of setting up this particular combination. according to google a solution is desperately needed and the existing topics didn't really solve the issue...
anyway, i managed to get it working and posted the solution on http://digitalmarried.com/lessn/1

I have had exactly the same problem with the same symptoms.
My Airport Express has worked perfectly with my Thomson/Alcatel SpeedTouch 510 ADSL modem, and originally, I set the system up in minutes. However, the SpeedTouch has just died, so I replaced it with a Netgear DM111P (which incidentally, is the only modem being sold via the French and Swiss Apple Stores). The DM111P was set up (PPPoE, account name & password as given by ISP) using the direct Ethernet connection, and within minutes I was on-line again. Connecting the Airport Express to the modem via the Ethernet cable, I was able to access my Airport connection as before (settings unchanged), but got the permanently scrolling message 'Searching for PPPoE host'.
I wasted a whole weekend trying to find out why I could access the internet directly, but could no longer connect via the Airport Express (looked as if the modem and Airport were not communicating with each other). In my last ditch attempt, I found something that worked-
System Preferences> Network> Airport:
TCP/IP tab
Configure IPv4: Using DHCP
Airport Admin Utility:
Internet tab
Connect Using: Ethernet
Configure: Using DHCP
DHCP ClientID: **********
where ********** is the 12 character Airport Ethernet ID printed on the case of the Airport.
Connected first time!
PowerMac G5, PowerBook Ti, iBook G4 Mac OS X (10.4.8)

Netgear WNDR3300 and Airport Express

I am having a problem with extending my network, I get all the way set up and when I choose to extend network and click on the network I want to extend I get a drop down error stating that network cannot be extended. Is my router not compatible with the Express or vice versa?

Welcome to the discussions!
Unfortunately, Apple's "extend a wireless network" feature will only work if both your "main" and "remote" devices are newer Apple products. This feature is not compatible with other manufacturer's devices.

I just purchased Apple TV AND AIRPORT EXPRESS. I am questioning if I need it when I already have a Netgear Powerline AV 200 Adapter Kit XAVB2001. Does the Airport Express do the same thing?

I just purchased Apple TV AND AIRPORT EXPRESS. I am questioning if I need it when I already have a Netgear Powerline AV 200 Adapter Kit XAVB2001. Does the Airport Express do the same thing?

Thank you so much. Any specifics I should know about prior to connecting? The goal is to watch Netflix from my iPad or iPhone 5 on my tv (located in different room from where Comcast internet modem is hard wired to main computer in house). Movies would depend on wireless transmission to a smart tv not connected to modem.

AirMac Extreme and Airport Express not working with Netgear N Router?

I've been using an AirMac Extreme (old model) as a wireless router, and Airport Express for it's airtunes functionality (conected to my Hi-Fi).
These used to work fine, and both would show up in my Airport Utility on my Macs.
I've now just upgraded to a 50MG broadband contract, and the engineer gave me a Network router as my old AirMac Extreme couldn't handle that bandwidth.
When I connected my AirMac Extreme to my Netgear router I then got conflicts, sometimes it wouldn't show up, and it really slowed down my wireless signal. As a result the contractor for my broadband recommended I disconnect my Air Mac Extreme from the router. Speeds went up for the internet, but now I can't get my airtunes to work.
What I want to know is can I just use my Netgear to transmit the broadband signal so I get maximum internet speeds, but then have my AirMac Extreme and Airport Express connected so that I can still listen to my itunes wirelessly?
Ideally I'd like this to all be set up so that I could be conected to the internet through the Netgear wirelessly and listen to my itunes through the Airport Express at the same time.
Thanks in advance for any advice.

I am sorry that I don't have a definitive answer but I also have Windows computers and I have "inherited" some older Apple devices from my son and am trying to learn about them so in addition to searching this group, I "Googled" "1st generation airport express" and it listed many specific posts in this group - I read them all and they might answer your question - good luck

Netgear and Airport express

Hi there,
I have an airport and airport express that work well together with my powerbook - my partner uses a PC, has a Netgear wireless router - the question is - can I take my airport express round to hers and plug it into her printer and hifi to play music or print through my Powerbook - if I can how do I set it up?
Cheers

If you take your Airport Express from your house to your friend's place, and all you do at your friend's place is plug a printer and a sound system into your Airport Express, then you don't need to change any settings on either your Mac or the Airport Express - other than the obvious ones of (a) installing the printer on the Mac and (b) configuring your Airport Express to enable Airtunes and name the speakers (both settings found under the Airport tab of the Airport Admin Utility).
If, however, you want to have both wireless iTunes streaming and printing AND internet access at the same time - that requires more a complicated reconfiguration. Please post another message indicating if that is the intent.

How to setup ADSL moden router and Airport Express 802.11n (1st Generation) to provide internet and airplay connections to multiple devices?

I have a Netgear wireless ADSL modem router (wireless + four ethernet out ports) that i'd like to connect to a 1st gen Airport Express to create a small home network to provide internet access for a MacBook, iPhone and Apple TV, and to provide Airplay connection to the Apple TV and Airport Express audio output jack.
I'd like to turn off the wireless function of the ADSL modem router, and to have from one of its ethernet out ports an ethernet cable providing internet directly connected to my MacBooks ethernet port.
Then from one of the other ethernet outs on the ADSL modem router an ethernet cable connected to the Airport Express's ethernet port. This would be to provide wireless internet connection for the Apple TV and iPhone via WiFi from the AE.
At the same time as the MacBook is receviing internet soley via the ethernet in port, i'd like it to have WiFi connection to the AE to provide Airplay connection to the Apple TV and the AE's audio out jack.
Is this all possible? How should I go about to configure this? How should the AE's ethernet port be configured?
Any special modes the ADSL modem router or Airport Express should be in? ie bridge or client?
Thanks

On the ADSL modem router web-based interface, should I set any security setting? I think not as there'll be no wireless signal coming from it, only wired ethernet connections to both MacBook and AE. Security should only be set on the AE to prevent someone from accessing its WiFi signal. Is this assumption correct?
These are all correct!
How should I go about setting up security for this network?
First I would recommend that you configure the AirPort Express for WPA2 Personal. This will provide you with the greastest level of security while still providing excellent bandwidth performance.
You would configure wireless security for the Express by using the AirPort Utility on a Mac, PC, or iOS device. Using your MacBook Pro as an example, you would do so as follows:
Run the AirPort Utility.
Select the Express, and then, click on Edit.
Select the Wireless tab to enable it.
Set the Wireless Security option to: WPA2 Personal
Enter the desired password in both the Wireless Password & Verify Password fields. Note: Use of a "strong" password is encourage here. By strong, I mean use a mix of upper/lowercase letters, numbers, & punctuation marks. Try not to use common dictionary words. If you operate your wireless in an area where security is of an utmost concern, I would further suggest that you change the wireless security password every 60-90 days. Also don't forget to change the default AirPort Base Station Administrator password as well.
Click on Update and allow the Express to restart.

Best Router with DSL Modem for use with AT&T DSL and Airport Express?

I recently had my old 2WIRE from AT&T DSL service die, so purchased a new 2WIRE 2701HG-B. My old 2WIRE worked with my Airport Express, which is hooked up to my DVR for DirecTV use. The new 2WIRE apparently is not compatible with the Airport Express, so I returned it and purchased a NetGear Wireless-N 300 Router with DSL modem. While this one does work with the Airport Express setup, it runs very slow. This router has mediocre reviews, so I'd like to find a better one.
I'd appreciate any suggestions for a Router w Modem that would work best with my AT&T DSL and Airport Express (802.11n) within the $100 - $150 price range. Thanks!

Configure the Express as a bridge: Connect via "Ethernet", and set Connection Sharing to "off (bridge mode)".
The switches ought not to be a problem, and I don't know why your router froze. The Express is simply another wired client, just like a computer might be.
do I turn off DHCP on the router,
No. Something has to provide routing functions so leave the Linksys alone.

Wireless modem and Airport Express.. one at a time

Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my iTunes music via Airport Express to my sound system, no dice. I have to either click on the modem up in the Airport choices to be online and listen to iTunes through the computer speakers, or go offline to listen to music through the sound system and Airport Express.
I'm sure I'm just missing something in preferences or settings somewhere.
Can someone point me in the right direction?
Thanks, and Happy New Year!

No ideas?

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

Can I stream music to apple tv and airport express at the same time?

Does anyone know if I can stream music to both AppleTV and Airport Express (speakers) at the same time?
I have a TV in my living room and external speakers on my deck and want to stream music to both at the same time so I have the same music playing in both rooms - but I can't get an answer on IF I can do both at the same time or it I'd have to select one over the other?
Anyone know?

yes - the built-in music app allows to select one speaker only at the same time.
now i've found the WHAALE Multiroom Player App (http://www.whaale.com) - and it sends directly from the iOS Device to my 6 AirPlay speakers. One of them is an Apple TV...
all "in sync" and without any special hardware and additional software.
And i am able to stream different songs to different rooms...
Just AirPlay speakers - wifi router - WHAALE -> that's easy :-)

I have a pioneer vsx-910-k and airport express.I have a wireless network at home. What's the best arquiecture/config to do with this hardware?

I have a pioneer vsx-910-k and airport express.I have a wireless network at home. What's the best arquiecture/config to do with this hardware?

I would suggest that you connect the Pioneer to the AirPort Express Base Station using an optical digital audio cable that has a TOSlink connector on one end and a 3.5 mm optical connector (Mini Plug) on the other. You can then connect the Mini Plug end into the AirPort's audio port and the TOSlink end into one of the Pioneer's optical digital audio ports.

Netgear DG834N and Airport Express

Similar Messages

Maybe you are looking for