Netgear Readyshare Print - Does Anyone Have this Working?

I have a WNDR4500 router with Netgear Readyshare facilities.
It's supposed to offer easy network printing with a USB printer attached.
I've been unable so far to get a USB printer to work.
The supplied Netgear USB Control Center utility installs fine into Lion. It detects and displays the printer. However I do not know how to set up the printer on Lion. I tried defining a printer queue using IP printing to default queue on the routers IP address. This gets as far as showing me a print queue but all attempts to print result in the printer busy error.

Same here. On both Mac and Windows I can't seem to get printing to my Canon MP600 to work. I filed a support ticket to Netgear...to be continued

Similar Messages

SCOM 2012 SNMP Trap - Does anyone have it working?

I am wondering if anyone out there has had any luck with getting SNMP Traps to be captured by SCOM 2012? Probes work fine.
We have been unable to get SCOM 2012 to receive a SNMP Trap from network devices. We currently have a case open with Microsoft, but they dont have any answers as of yet.
Here are the cliff notes version of what we have done so far.
Discovery - OK
The nodes discover without issue. I made sure they were set to SNMP only. I did this to verify we were talking SNMP and not just ICMP.
Open Ports/Firewall Issues
No firewalls are in place on the SCOM server and none exist between devices we are trying to get traps from. Using a port tool, I can see that UDP 162 is listening as expected and its the System Center Management Host Process that is running the
process. We have tried having SNMP installed, but disabled, installed and running, and uninstalled. Currently we have the SNMP service installed and running. The SNMP Trap Service is NOT installed.
Data Validation
Using Wireshark running on the SCOM box I have been able to validate the OIDs we are searching for are hitting the SCOM server. I installed an SNMP Trap generator and Receiver on my local machine as well as Jalasoft SNMP Simulator. I was able
to discover my local machine as a network device and if I send a TRAP from the TRAP generator on my local machine to the receiver on my local machine I can validate the data is coming through ok.
What has been done on SCOM side
The simplest place to look for data is with an Event Collection Rule and then an Event View Monitor. We have set up an Event Based Monitor to search for an OID that I know to be accurate and then I set up an Event monitor to look for
anything hitting that Collection Rule. The Event monitor showed nothing so we changed the EVent Monitor to look for anything that hit Node which should show any SNMP traps that have hit from network devices. No results.
We tried to run WFAnalyzer from the 2007R2 Authoring Console, but it wont run against 2012 and from what I have found the 2012 edition doesnt exist anywhere yet.
So has anyone succesfully received a SNMP TRAP into SCOM 2012?

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks,
Yog Li
TechNet Community Support
How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful. The question remains, Does anyone have it working?
People have given troubleshooting advice, but nobody has actually answered the simple question. Do they have it actually WORKING?

Tinymce - does anyone have it working in cfform?

Downloaded today. successfully works <form> but not
<cfform>.... can anyone help?????

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks,
Yog Li
TechNet Community Support
How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful. The question remains, Does anyone have it working?
People have given troubleshooting advice, but nobody has actually answered the simple question. Do they have it actually WORKING?

Since updating to iOS 8.0.2 my hotspot is no longer available. Does anyone have this issue?

Since updating to iOS 8.0.2 my personal hotspot is no longer available. Does anyone have this same issue?

I had the same issue
Go to Settings / Cellular / Cellular Data Network, scroll down and you will see PERSONAL HOTSPOT.
For APN I used 'internet'.
The password came in automatically
All was restored then

I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.

I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.

A Safe Mode boot might help ..
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
See if the problem persists.

S-Line Case for iPhone 4: Does anyone have this case?

Does anyone have this case? Is it any good?
http://www.ideal-case.com/s-line-series-silicone-case-iphone-4-black.html

my friend is getting his but I don't think he has it yet.

I just bought an ipod touch 4th generation recently,found that it is very difficult to plug and unplug the USB cable from my ipod.Does anyone have this problem?

I just bought an ipod touch 4th generation recently, found that it is very difficult to plug and unplug the USB cable from my ipod. Does anyone have this problem?

Some of the Dock connector cables have very small buttons on the rounded adge of the plug, which need to be pushed in to release the plug from the iPod. Look at the picture below, do you notice the "button" on the white connector edge? There's one on the other edge too and they both need to be pressed in to release the "evil looking spike" sticking out of the grey edge.
The shorter plugs (that I've seen) do not have the release mechanism, the plug simply pulls out.

The power cord doesn't seem to work properly. It doesn't charge my Iphone 6. Does anyone have this problem?

It looks like there's a problem with the power cord or with the connector. When I plug in the phone it starts to buzz repeatedly that sound that notices the charge is starting, but it doesn't go on. On the screen, also, the battery symbol changes constantly from black to green to black again to green and so on, so I understand it's trying to charge, but it's not working.
Does (or did) anyone have this problem?
Thank you

So today I went to an official Apple store and did some tests. As you said, the problem was the cord itself. My Iphone it's only two weeks old, so I guess the warranty will carry with a new one. As I need the phone, I decided to buy another cord. In the end, I guess I'll have two cords, which is not such a bad deal.
Thank you all for you kind answers and help.
T

HT4061 hi i have the new ipad as times when on safari - internet the screen drops out for no reason. does anyone have this problem

hello i have the new ipad 32GB as times when on the internet on safari the screen goes blank and drops out does anyone else have this problem

Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Symbolism 2.6 Does Anyone Have This App?

I just downloaded this app last week. I saw alot of good reviews so I decided to get this app. This is a game app that is very much like the pc game Alchemy. It is suppose to have online wi-fi capabilities for chat, but as soon as it says I am logged in, I get this message unable to connect to Feint. This app is made by Chewsoft, and used OpenFeint to connect to chat, see scores, ect. My wi-fi is on, and working, and my settings allow for this app to work, so I can't understand why it won't connect.
Does anyone else have this app?

So today I went to an official Apple store and did some tests. As you said, the problem was the cord itself. My Iphone it's only two weeks old, so I guess the warranty will carry with a new one. As I need the phone, I decided to buy another cord. In the end, I guess I'll have two cords, which is not such a bad deal.
Thank you all for you kind answers and help.
T

Does anyone have bluetooth working? [solved]

I can't believe this. For months I can't even use a bluetooth mouse!
Once working fine, then there appeared to be a bluez issue, so I got the latest release 4.40
got my /var/lib/bluetooth/MAC/trusts file and finally had my mouse back until...
after a few minutes it lost the connection and refuses to reconnect.
Now kbluetooth won't start, that is, it doesn't appear and says it's already running!
I've tried blueman but that wants to pair the mouse with a passkey.
So if anyone has a working kbluetooth please post the configuration here.
Many thanks!
Last edited by subatomic (2009-06-28 14:46:16)

I had the same problem, my bluetooth mouse stop working when I upgraded to bluez 4.x
$hidd --connect xx:xx:xx:xx:xx:xx --server
is deprecated and documentation about bluez ActivateService is not working with bluez4.x:
$dbus-send --system --print-reply --dest=org.bluez /org/bluez org.bluez.Manager.DefaultAdapter
Error org.freedesktop.DBus.Error.UnknownMethod: Method "DefaultAdapter" with signature "" on interface "org.bluez.Manager" doesn't exist
Google suggest me to install d-feet and look into dbus to correct the python scripts and finally I got my bt mouse back again.
bt_mouse_create.py:
import dbus
bus = dbus.SystemBus()
manager = dbus.Interface(bus.get_object('org.bluez', '/'), 'org.bluez.Manager')
adapterpath = manager.DefaultAdapter()
adapter = dbus.Interface(bus.get_object('org.bluez', adapterpath), 'org.bluez.Adapter')
devicepath = adapter.CreateDevice('xx:xx:xx:xx:xx:xx')
print devicepath
Replace xx with your mouse's mac
Run once and take note about the output string.
Replace it in the next script.
bt_mouse_connect.py:
import dbus
bus = dbus.SystemBus()
devicepath='/org/bluez/7077/hci0/dev_xx_xx_xx_xx_xx_xx'
device = dbus.Interface(bus.get_object('org.bluez', devicepath), 'org.bluez.Input')
device.Connect()
I Hope it works for you too.

Does anyone have this problem with Pages? and how do i fix it?

Hi
Whenever i open a document that i've made in pages, i get a yellow box around the pages that i have made (say page 1 - 4) and it won't let me insert another page in between them. I then have to start a whole new document and copy past my information into the new document.
Does anyone know how to get the yellow box to sit only around 1 page like its meant to?

MLCIT wrote:
Thanks i will definitely use Layout
Good idea.
This way you will be unable to build a TOC.
You will be unable to export as ePub.
If my memory is OK you will be unable to create bookmarks.
Good luck.
Yvan KOENIG (VALLAURIS, France) mardi 21 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

When I am listenign to songs off iphone, I hear the music but not the vocals does anyone have this problem and do you know how I can fix this

When i am listening to music from iphone, teh sound is greater than the vocals. Does anyone else have this problem and if you do, how do I fix it, it's somewhere in the setting i believe

Plug the headphones all the way in.

Does anyone have a working amtlib.dll files for Primere Pro CC and After Effects CC?

I have had problems when installing it, it s saying it is missing the amtlib.dll file (on both) I do have PS CC working, but apparently PPCC and AECC require different amtlib.dll files
Please don't post any spam links :/
Thanks!

download the installation files and properly install your apps.
you might want to uninstall and clean before doing that (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6).
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

IPad mini is very slow, it seems to be working harder since iOS 8 update. Does anyone have this problem?

I have an iPad minI, since the update to iOS 8 it's been very sluggish. When you double click the home button, its not smooth and seem less like iOS 7. is anyone else having this issue??

All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then?

Netgear Readyshare Print - Does Anyone Have this Working?

Similar Messages

Maybe you are looking for