Netgear + "The connection to the host was unexpectedly lost"

I have an 802.11g Netgear router. I just got it, previously I had the exact same router, but 1 "version" behind.. aka it was gray and this one is white, but everything else SEEMS identical.
Everytime I try to connect to iChat now, I get the message:
"Lost connection with AIM
The connection to the host was unexpectedly lost."
My buddy list starts to come up, that message appears, the buddy list closes, and I'm screwed.
I am set to the DMZ. I am using port 5190, but 5191 and other ports work.. but I cannot use audio or video chatting. My client shows up as "not capable" of audio or video (MBP so I'm capable of both, and did both before this new router).
Help is appreciated, and I will gladly hand out cookies to anyone who can help.

Hi
Try this log on to AIM on port 443 rather than port 5190.
Go to IChat > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443.
Log back in again.
Tony

Similar Messages

  • The connection to the host was unexpectedly lost. AIM

    I am trying to connect to AIM via iChat in Mac OS X Tiger. Everytime I try to connect it shows my buddy list for about 1-2 seconds and then says, "The connection to the host was unexpectedly lost." I don't have aim connected on this computer or any other computer on the network when I try. Any help or recommendations are appreciated.
    Thanks

    124333.047765 Loading hardware rules from hardwarerulesH264-G4.plist
    124333.047851 Checking H264 hardware rules
    124333.047889 Satisfied rule #1 (20:640x480)
    124333.048134 setLocalUserName: myname@myip
    124333.174734 Default video size is (640x480)
    124333.318247 ### NEW STATE: to: VC_INIT, from: VC_INVALID
    124333.319157 ### NEW STATE: to: VC_IDLE, from: VC_INIT
    124333.319198 ++++++++ confStatusMapRemoveAll
    124333.319238 ( ) -- mapUserIDToSecurityInfo cleared --
    124333.319423 UPnP init passed
    124333.319569 NATTraversal created
    124333.319697 QT automatic setting = 16777216
    124333.319708 Bandwidth based on QT prefs = 0
    124333.382414 UPnP Router Info:
    - manufacturer [NETGEAR, Inc.]
    - friendly name [Residential Gateway]
    - model name [RangeMax(TM) Wireless Router]
    - model desc [RangeMax(TM) Wireless Router]
    124333.382654 UPnP: Begin TCPProc
    124335.591339 BWD: cache: '[myip:255.255.255.0]' != '[myip:255.255.255.0]'
    124335.591361 BWD: Launching thread to determine focus capability based on bandwidth.
    124335.591509 QT automatic setting = 16777216
    124335.591541 BWD: Using QuickTime value: 0
    124335.591569 BWD bandwidth: 0 kbits up, 0 kbits down.
    124335.591595 videoNetworkCapable: 0 -- 0 max participants.
    124335.591628 audioNetworkCapable: 0 -- 0 max participants.
    124335.591710 vcCapabilities returns: 0x00000007
    124335.591738 VCCapAudio
    124335.591838 VCCapVideo
    124335.591912 VCCapMultiAudio
    124335.830696 BWD Configuration Data: bwdstart://snatmap.mac.com:16384
    bwdcount:1
    (16384/1)
    124335.830753 Connect to bwd server:16384/1 from configuration file.
    124335.840447 Found 1 cameras:
    124335.840516 Built-in iSight - -46137344
    124335.842033 selectCameraByGUID: -46137344 returned 1
    124335.847738 BWD_GetBandwidth: SendRequest (from :16392)
    124335.882925 BWD_GetBandwidth: GotResponse
    124335.898912 Microphone devices:
    124335.899039 Internal microphone
    124335.899114 Line In
    124335.899175 selectedCamera GUID returned Built-in iSight
    124335.913958 selectedCamera GUID returned Built-in iSight
    124335.914034 Selected mic: Built-in Mic / imic
    124335.914177 Found 1 cameras:
    124335.914210 Built-in iSight - -46137344
    124335.914256 selectedCamera GUID returned Built-in iSight
    124335.916223 Microphone devices:
    124335.916299 Internal microphone
    124335.916369 Line In
    124335.916407 selectedCamera GUID returned Built-in iSight
    124335.916457 selectedCamera GUID returned Built-in iSight
    124335.916503 Selected mic: Built-in Mic / imic
    124335.916584 Found 1 cameras:
    124335.916601 Built-in iSight - -46137344
    124335.916639 selectedCamera GUID returned Built-in iSight
    124335.918550 Microphone devices:
    124335.918625 Internal microphone
    124335.918712 Line In
    124335.918746 selectedCamera GUID returned Built-in iSight
    124335.918795 selectedCamera GUID returned Built-in iSight
    124335.918856 Selected mic: Built-in Mic / imic
    124336.650053 BWD cache: saving [myip:255.255.255.0]:433131/[email protected]
    124336.651405 GotBandwidth: 433131/2532198 (up/down) @[myip:255.255.255.0]
    124336.652837 BWD bandwidth: 433 kbits up, 2532 kbits down.
    124336.652849 videoNetworkCapable: 1 -- 3 max participants.
    124336.652859 audioNetworkCapable: 1 -- 9 max participants.
    124336.652889 Focus Capability (after BWD):
    124336.652921 audioHardwareCapable = 1
    124336.652943 maxAudioParticipantsBasedOnHardware = 9
    124336.652967 audioNetworkCapable = 1
    124336.653029 maxAudioParticipants = 9
    124336.653060 canBeAudioMultipointParticipant = 1
    124336.653088 videoHardwareCapable = 1
    124336.653119 maxVideoParticipantsBasedOnHardware = 3
    124336.653147 videoNetworkCapable = 1
    124336.653177 maxVideoParticipants = 3
    124336.653205 canBeVideoMultipointParticipant = 1
    124336.653236 detectedUpstreamKbits = 433
    124336.653264 detectedDownstreamKbits = 2532
    124336.653294 Sending VCCapabilitiesDidChangeNotification
    124336.653520 BWD: GotBandwidth: 433131/2532198 (up/down) @[myip:255.255.255.0]
    124336.653535 BWD bandwidth: 433 kbits up, 2532 kbits down.
    124336.653543 videoNetworkCapable: 1 -- 3 max participants.
    124336.653564 audioNetworkCapable: 1 -- 9 max participants.
    124336.653628 vcCapabilities returns: 0x0000003f
    124336.653651 VCCapAudio
    124336.653698 VCCapVideo
    124336.653720 VCCapMultiAudio
    124336.653765 VCCapMultiVideo
    124336.653795 VCCapMultiAudioHost
    124336.653823 VCCapMultiVideoHost
    124336.654917 BWD: Launched thread done.
    124336.655078 Found 1 cameras:
    124336.655123 Built-in iSight - -46137344
    124336.655171 selectedCamera GUID returned Built-in iSight
    124336.657146 Microphone devices:
    124336.657220 Internal microphone
    124336.657309 Line In
    124336.657346 selectedCamera GUID returned Built-in iSight
    124336.657396 selectedCamera GUID returned Built-in iSight
    124336.657452 Selected mic: Built-in Mic / imic
    124336.672544 Found 1 cameras:
    124336.672585 Built-in iSight - -46137344
    124336.672634 selectedCamera GUID returned Built-in iSight
    124336.674617 Microphone devices:
    124336.674691 Internal microphone
    124336.674783 Line In
    124336.674822 selectedCamera GUID returned Built-in iSight
    124336.674871 selectedCamera GUID returned Built-in iSight
    124336.674930 Selected mic: Built-in Mic / imic
    124336.675028 Found 1 cameras:
    124336.675045 Built-in iSight - -46137344
    124336.675095 selectedCamera GUID returned Built-in iSight
    124336.677030 Microphone devices:
    124336.677205 Internal microphone
    124336.677354 Line In
    124336.677459 selectedCamera GUID returned Built-in iSight
    124336.677563 selectedCamera GUID returned Built-in iSight
    124336.677665 Selected mic: Built-in Mic / imic

  • "The connection to the host was unexpectedly lost" Cannot log into AIM

    Every time I try to log into ichat, using AIM service I get this message...
    The connection to the host was unexpectedly lost.
    However, I can log onto ichat on my other mac. (macbook) And I can access AIM from AIM program on my windows computer....
    Everything in preferences is configured right...Can anyone shed some light onto this?
    thanks,
    Joel

    I have this problem, using ichat only (not using aim directly) and posted before in another thread with essentially the same name as this one. I tried all the solutions offered and none worked. BUT I did "solve" my problem. Here's how:
    Solution number 1) I connected my macbook via an ethernet connection directly to my cable modem. No other changes at all, no further problems, was able to use ALL features of ichat immediately and quite well (audio and video).
    Solution number 2) Since we have several computers at home, we must use a wireless router, a Netgear router. If I connect to the router (which then connects to the cable modem), ichat does not work, and I get the exact message as in this subject line. Going to the Netgear router settings (changing nothing on my macbook), I changed ONE thing only: I disabled the SPI firewall. Then, no problem using ichat to chat, but I still can't use audio or video features.
    Hope this helps. For me, it diagnosed the problem with using basic ichat: the SPI firewall on the router. Also, the audio/video problem is a router problem too, which I do not yet know how to fix.
    Since I am timid and fearful, I do not want to leave the SPI firewall permanently disabled.

  • Constantly get "The connection to the host was unexpectedly lost."

    When I try to use IChat at home on my PowerBook I get "The connection to the host was unexpectedly lost." as soon as I try to connect. This does not happen at work though. It works fine at work.
    I thought it might have something to do with the different ISP's or Router settings on my Netgear wirless router. (At home I connect via ethernet cable.) However it WILL work at home about 5% of the time.
    ANy Ideas to troubleshoot?

    Hi Scuba Dan,
    Check that Systrem Preferences > Quicktime > Streaming tab has the drop set to your Download speed.
    http://www.ralphjohnsuk.dsl.pipex.com/page4.html#_quicktime
    Also check iChat > Preferences > Video Section Bandwidth drop down is set to NONE.
    http://www.ralphjohnsuk.dsl.pipex.com/page4.html#_bandwidth
    These two will cap iChat if not set properly.
    As Defcom says if these settings are correct you may have a modem that is having trouble wiith forwarding port 5190 on both TCP and UDP protocols.
    Changing the setting he mentions drops the login below any Port Forwarding and NAT involvement on your modem and router.
    Having said that avoiding NAT and Port forwarding by using UPnP is another way around this. Most Netgears have UPnP enabled as default. You don't need Port Forwarding ANd UPnP. Disable the Port Forwarding settings by Unchecking them.
    For others,
    Zyxel devices are prone to needing port 443, as are newer devices that want protocols to be set when Port Forwarding.
    10:56 PM Tuesday; October 17, 2006

  • "The connection to the host was unexpectedly lost"

    Occasionally when I try to log in to my AIM account, I get the message, "The connection to the host was unexpectedly lost." This happens randomly and if I keep pushing it, sometimes it will let me on. It seems to be entirely at the will of the computer.

    Try the Combo Update to get to 10.4.11
    PCC computer use this http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
    Intel ones use this http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
    9:16 PM Wednesday; March 31, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Connection to the host was unexpectedly lost.

    I'm still having problems connecting to AIM using iChat. I switched to port 443, and I still get the message that the connection to the host was unexpectedly lost.

    Ok,
    Do you have individual wall sockets ?
    Do you have a router in the room ?
    IS your Wireless card set up for Interference Robustness ?
    How are the ports opened in the modem ?
    UPnP for two computers ?
    7:45 PM Monday; September 10, 2007

  • What does this mean?? "The connection to the host was unexpectedly lost."

    i get this 95% of the time i try to login:
    The connection to the host was unexpectedly lost.
    it then closes
    i go thru AIM
    _*someone please help*_
    Message was edited by: migueliguel
    Message was edited by: migueliguel

    Hi
    Try logging on to AIM on port 443 rather than port 5190.
    Go to IChat in the menu bar > Preferences > Accounts.
    Log out of AIM and then use the Server Settings tab
    Set the port to 443.
    Log back in again.
    Tony

  • IChat: "The connection to the host was unexpectedly lost"

    I have I will be talking to people on iChat and will not recieve responses from anyone for a while then suddenly i am kicked off and the error message "The connection to the host was unexpectedly lost" appears. I will log back on and the people whom I was talking to say they were sending me messages and they didnt get any of the messages i had sent.
    Thank YoU!!!

    Hi Samantha,
    Have answered here.
    3:50 PM Wednesday; March 1, 2006

  • Connection to host was unexpectedly lost.

    IT keeps saying that every time I try logging into ichat...and even if I get passed that, my buddy list won't show up. This even happens with adium.
    Any ideas??

    Hi
    First try this log on to AIM on port 443 rather than port 5190.
    Go to IChat > Preferences > Accounts.
    Log out of AIM and then use the Server Settings tab
    Set the port to 443.
    Log back in again.
    Tony

  • Every time I try to sign on it says that ichat lost the connection to the AIM account and the server connection was unexpectedly lost.  How can I fix this?

    Every time I try to sign on it says that ichat lost the connection to the AIM account and the server connection was unexpectedly lost.  How can I fix this?

    Note For others.
    For the Port Changes (or server names in some cases) you have to be logged out to make changes on the Server Settings pane.
    9:41 PM      Friday; October 28, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT1766 can i back up my ipad if the host computer has lost every thing?

    Can I back up my ipad if the host computer has lost its operating system and the was re-instald?

    Yes, this would be like syncing to a new computer. So, some precautions are required or you might lose what's currently on the iPad.
    iTunes will only let you sync to one library at a time, if you get this warning message, follow this:
    Syncing to a new computer without losing Data
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/

  • AIM - connection with host unexpectedly lost

    When I am using my school's wireless internet, I can log onto iChat for about a minute, and then it logs off and says "Lost Connection with AIM. The connection with the host was unexpectedly lost."
    If I stay on the iChat window it stays logged on, but if I bring another application to the front of the screen it eventually logs off.
    I also cannot use video chat.
    I found a similar thread that said to use port 443, which I am currently using.
    It does the same thing even if I am logged in to my .mac account. However, Adium works and everything works fine when I am at home or somewhere else. As far as I know, my proxy information for my school's wireless is correctly entered in.

    Hi,
    Welcome to the  Discussion Pages
    iChat is very sensitive to Proxies.
    In fact I would say it does not like them at all based on the posts in these forums. Many people report they can not get it to work with a proxy whether it is listed in the iChat > Preferences > Accounts > Server Settings or in the System Preferences > Network.
    I don not use Proxies and still find at some points iChat does not seem to be able to stay logged in.
    I never use another client long enough to provide a comparison.
    iChat gets constant feedback from the AIM servers to keep the Buddy List updated. More so than a Minute check setting by Mail - so I can not see it is any time-out limit on the proxy.
    Isn't iChat using port 1080 for the Proxy ? (or whatever your Proxy uses )
    10:49 PM Wednesday; April 2, 2008

  • Connection to AIM unexpectedly lost

    Very often when I am not using iChat, my buddy list will all of a sudden switch to "Disconnected" and I will get a message saying "The connection to the host was unexpectedly lost." iChat used to work just fine! What can I do to get it back to the way it was?

     How to get iChat AV working again

  • The TCP/IP connection was unexpectedly terminated by the server (NNTP)

    I had a prior thread on this topic which was apparently closed to further posts:
    http://homecommunity.cisco.com/t5/Wireless-Routers/The-TCP-IP-connection-was-unexpectedly-terminated...
    so I'm opening this new thread. The problem was never solved and I could not deal with the help being offered here previously.
    The problem is...
    My connection to a NNTP news service which I use very frequently is reset every 10 minutes so that I get the message: The TCP/IP connection was unexpectedly terminated by the server.
    I have been getting this error at least a dozen times per day for more than a year. So it has become a major annoyance and I want to fix it if possible. I wonder if there's any new insight available? I'm not a rank beginner but am far from being a router expert. I do not understand many of the router settings.
    Here's a more detailed description of the problem...
    After getting the error, I must then click on something else in my email client (Outlook Express) then return to click on a newsgroup under that news service, whereupon it reestablishes a valid connection for another 10 minutes. If I am active and click on various messages to read them in the newsgroup, the 10 minute timeout does not happen. It's only when I have left the connection idle without activity for 10 minutes that it times out.
    This is a news server which requires an authenticated login with username and password. The same problem happens at a different news server which also requires an authenticated login with username and password. So it is not a problem unique to just one news service. It affects all news services which have an authenticated login requirement. An example news service with a sample newsgroup which has this type of problem is
    news:\\news.eternal-september.org\alt.free.newsservers
    It's free but you must register at http://eternal-september.org/ to use this news service.
    It does not happen at open news services without any login requirements. So it is definitely related to the login requirement.
    Perhaps most importantly, it does not happen if I remove the Linksys E2000 router from the circuit and connect my DSL modem directly to computer. So it is definitely a router-related problem causing this inactivity timeout every 10 minutes.
    Windows XP Home SP3
    Outlook Express 6
    Zone Alarm 6.1.744.001
    Linksys E2000 router
    firmware 1.0.04 build 7
    software 1.3.11006.1
    connection type (WAN) DHCP
    mostly the default settings used

    [It is very frustrating to try to work with this board because of the short timeout invoked when editing a message! The following is what I intended to post after a bit of reflection...]
    I researched this a bit and bridge mode is available via a setting in my Speedstream 4100 modem, so I don't have to call my ISP. But I'll need to research the consequences a bit more and record some variables to make sure I can get back to my current configuration. There are 3 available settings (radio buttons) in my modem...
    PPP Location
    WARNING
    Changing these settings may interfere with your ability to connect to the Internet.
    *  PPP is on the modem. This is the normal mode for this modem when connected to a single computer. In this mode, the PPP session is initiated from the modem. Gateways and routers should work in this mode but their configuration may have to be changed to do so (e.g., you may need to have the gateway/router IP address changed to 192.168.1.1).
    *  PPP is on the computer. This mode is normally used if you need to run a PPPoE client on your PC. This mode can be used with a gateway or router which initiates a PPPoE session. To return to the DSL modem user interface you will need to directly connect your PC to the modem without any gateway or router between the modem and the PC.
    *  Bridged Mode (PPPoE is not used). This mode must be used if you are connecting to a non-PPPoE network. Selecting this mode will cause the modem to automatically restart.

  • Virtual Machine crashing all the time: The previous system shutdown at a certain date was unexpected

    Hello,
    I've a build node that is constantly crashing and rebooting. 
    When I go to system event log I'm not able to identify the reasons for such behavior.
    For instance regarding the machine latest crash I can see: The previous system shutdown at 10:24:57 on ‎27-‎02-‎2015 was unexpected.
    But when I try to find some entry corresponding to that time i see none!
    System:
    * Information 27-02-2015 10:25:53 Kernel-General 12 None
    * Information 27-02-2015 10:22:50 Service Control Manager 7036 None
    Application:
    * Information 27-02-2015 10:26:05 User Profile Service 1531 None
    * Information 27-02-2015 10:21:11 ClearCase 1024 View
    I ran the MiniToolBox to get a comprehensive list of errors that I'm having in this machine and hoppe that you can help me, pleaseeeee...
    MiniToolBox by Farbar  Version: 30-11-2014
    Microsoft Windows 7 Enterprise  Service Pack 1 (X64)
    Boot Mode: Normal
    ========================= Event log errors: ===============================
    Application errors:
    ==================
    Error: (02/27/2015 10:27:54 AM) (Source: WinMgmt) (User: )
    Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 02:29:00 AM) (Source: WinMgmt) (User: )
    Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
    System errors:
    =============
    Error: (02/27/2015 10:26:07 AM) (Source: Microsoft-Windows-GroupPolicy) (User: NT AUTHORITY)
    Description: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following: 
    a) Name Resolution failure on the current domain controller. 
    b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
    Error: (02/27/2015 10:26:05 AM) (Source: NETLOGON) (User: )
    Description: This computer was not able to set up a secure session with a domain
    controller in domain PT-RD due to the following: 
    %%1311
    This may lead to authentication problems. Make sure that this
    computer is connected to the network. If the problem persists,
    please contact your domain administrator.
    ADDITIONAL INFO
    If this computer is a domain controller for the specified domain, it
    sets up the secure session to the primary domain controller emulator in the specified
    domain. Otherwise, this computer sets up the secure session to any domain controller
    in the specified domain.
    Error: (02/27/2015 10:26:04 AM) (Source: EventLog) (User: )
    Description: The previous system shutdown at 10:24:57 on ‎27-‎02-‎2015 was unexpected.
    Error: (02/27/2015 02:27:28 AM) (Source: Microsoft-Windows-GroupPolicy) (User: NT AUTHORITY)
    Description: The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy
    has succesfully processed. If you do not see a success message for several hours, then contact your administrator.
    Error: (02/27/2015 02:27:26 AM) (Source: NETLOGON) (User: )
    Description: This computer was not able to set up a secure session with a domain
    controller in domain PT-RD due to the following: 
    %%1311
    This may lead to authentication problems. Make sure that this
    computer is connected to the network. If the problem persists,
    please contact your domain administrator.
    ADDITIONAL INFO
    If this computer is a domain controller for the specified domain, it
    sets up the secure session to the primary domain controller emulator in the specified
    domain. Otherwise, this computer sets up the secure session to any domain controller
    in the specified domain.
    Error: (02/27/2015 02:27:25 AM) (Source: EventLog) (User: )
    Description: The previous system shutdown at 02:26:03 on ‎27-‎02-‎2015 was unexpected.
    Error: (02/26/2015 08:57:10 AM) (Source: NETLOGON) (User: )
    Description: This computer was not able to set up a secure session with a domain
    controller in domain PT-RD due to the following: 
    %%1311
    This may lead to authentication problems. Make sure that this
    computer is connected to the network. If the problem persists,
    please contact your domain administrator.
    ADDITIONAL INFO
    If this computer is a domain controller for the specified domain, it
    sets up the secure session to the primary domain controller emulator in the specified
    domain. Otherwise, this computer sets up the secure session to any domain controller
    in the specified domain.
    Error: (02/26/2015 08:56:49 AM) (Source: Service Control Manager) (User: )
    Description: The Serviço McAfee Framework service did not shut down properly after receiving a preshutdown control.
    Error: (02/25/2015 11:46:47 AM) (Source: NETLOGON) (User: )
    Description: This computer was not able to set up a secure session with a domain
    controller in domain PT-RD due to the following: 
    %%1311
    This may lead to authentication problems. Make sure that this
    computer is connected to the network. If the problem persists,
    please contact your domain administrator.
    ADDITIONAL INFO
    If this computer is a domain controller for the specified domain, it
    sets up the secure session to the primary domain controller emulator in the specified
    domain. Otherwise, this computer sets up the secure session to any domain controller
    in the specified domain.
    Error: (02/25/2015 11:46:45 AM) (Source: EventLog) (User: )
    Description: The previous system shutdown at 11:45:21 on ‎25-‎02-‎2015 was unexpected.
    Microsoft Office Sessions:
    =========================
    Error: (02/27/2015 10:27:54 AM) (Source: WinMgmt)(User: )
    Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
    Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
    Error: (02/27/2015 02:29:00 AM) (Source: WinMgmt)(User: )
    Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
    CodeIntegrity Errors:
    ===================================
      Date: 2015-02-11 18:03:17.169
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-11 17:50:22.246
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-10 18:04:17.899
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-10 09:43:55.630
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 19:24:39.416
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 18:23:59.507
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 18:08:08.200
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 17:54:14.784
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 17:45:34.193
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
      Date: 2015-02-09 17:23:19.617
      Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
    =========================== Installed Programs ============================
    Cloud Services WMI Provider (HKLM-x32\...\{DA507693-A089-4D66-B88F-C468AE658FE5}) (Version: 1.1.5464.28193 - Spiceworks)
    CRT-71 (x32 Version: 1.00.0000 - IBM) Hidden
    GSKit8 SSL 32-bit (x32 Version: 8.0.50.16 - IBM) Hidden
    IBM Installation Manager (HKLM\...\IBM Installation Manager) (Version:  - )
    IBM Rational ClearCase (HKLM-x32\...\IM-com.ibm.rational.clearcase.nt_i386) (Version:  - )
    InstallAnywhere 2012 (HKLM-x32\...\InstallAnywhere 2012) (Version: 14.0.0.0 - Flexera Software LLC)
    McAfee Agent (HKLM-x32\...\{EBF3D65F-011E-44D2-8F4F-C74B52682EDD}) (Version: 4.8.0.1500 - McAfee, Inc.)
    Microsoft .NET Framework 4.5.2 (HKLM\...\{92FB6C44-E685-45AD-9B20-CADF4CABA132} - 1033) (Version: 4.5.51209 - Microsoft Corporation)
    Microsoft .NET Framework 4.5.2 (Version: 4.5.51209 - Microsoft Corporation) Hidden
    Microsoft Silverlight (HKLM\...\{89F4137D-6C26-4A84-BDB8-2E5A4BB71E00}) (Version: 5.1.20913.0 - Microsoft Corporation)
    Microsoft Visual C++ 2005 Redistributable (HKLM-x32\...\{710f4c1c-cc18-4c49-8cbf-51240c89a1a2}) (Version: 8.0.61001 - Microsoft Corporation)
    Microsoft Visual C++ 2005 Redistributable (x64) (HKLM\...\{ad8a2fa1-06e7-4b0d-927d-6e54b3d31028}) (Version: 8.0.61000 - Microsoft Corporation)
    Microsoft Visual C++ 2005 Redistributable (x64) (Version: 8.0.59192 - Microsoft Corporation) Hidden
    Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 (HKLM-x32\...\{9A25302D-30C0-39D9-BD6F-21E6EC160475}) (Version: 9.0.30729 - Microsoft Corporation)
    Microsoft Visual C++ 2010  x64 Redistributable - 10.0.40219 (Version: 10.0.40219 - Microsoft Corporation) Hidden
    Microsoft Visual C++ 2010  x86 Redistributable - 10.0.40219 (x32 Version: 10.0.40219 - Microsoft Corporation) Hidden
    microsoft.vs6 (x32 Version: 1.00.0000 - Your Company Name) Hidden

    Hi JoseRebelo,
    According to the title ,do you mean the host machine will reboot when we start the virtual machine and the virtual machine will crash or just the virtual will reboot ?Have you got a BSOD(Blue screen) ?
    Did the issue occur before ?Have you installed any third party software recently ?
    Please ensure the host machine has got the latest updates.
    I suspect there may be a third party conflicts here.
    Please try clean boot to have a troubleshoot .
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135
    If the issue occured recently ,we can try to perform a system restore to recover the machine to a previous point ot have a check.
    Best regards

Maybe you are looking for