Netgear WGPS606 wireless print server and HP1006

I have been trying to setup the Netgear WGPS606 wireless print server with my HP1006. The setup runs fine, finds the printer etc but when it comes to try to print a test page it is "unable to create a print job". When trying to print from Word etc I get similar message suggesting print test page/turn printer on/reinstall print drivers
I have spent hours with Netgear support who eventually said it MIGHT not be compatible
Before I bin it does anyone have any suggestions? I read somewhere it might be the USB drivers only work when connected directly to the PC (they're loaded up real time or something?) and to try using a serial driver instead?
Might that work, and if so does anyone know where I might find a suitable driver?
Thanks
J

I spent a month chasing my print server last year. Save yourself a month. The pad will find and print to airprint enabled printers. Period. It will not find a network print server.
Here is the list of printers, and some discussion.
http://support.apple.com/kb/ht4356

Similar Messages

Linksys Wireless Print server and my Mac G4

I just set up my linksys wireless print server and it's printing from my PC just fine - not so on my G4. My printer is a Canon Pixma ip5200, and the appropriate drivers etc are installed.
I know the IP address and have tried setting up the printer via IPP (and pinged it from the mac successfully). Just no success printing. The printer utility looks like it is printing to the printer but nothing comes out.
Any ideas?

You won't be able to get this to work.
The Canon printer drivers won't allow you to connect to and print to a Canon printer attached to a wireless print server.
There is no solution, there is no way that this can work
You have three solutions.
Replace the Canon printer with another printer for which the drivers will work.
Replace the Canon printer with a networked Canon printer such as the iP4000r (or any other network printer) in which case you won't need the print server
Connect the Canon printer directly via USB to the computer to print.
iFelix

Wireless Print Server and Macintosh

Hello:
I am using a Linksys Wireless Print Server WPS54GU2. I have a HP LaserJet 1012 printer hooked up to it. i have a iMac and a Dell Windows PC. From the dell Windows PC, the wireless printing is working fine to the laserjet, however i just bought my mac and i am trying to setup the printing but it is not working.
When i connect the printer directly to the mac through USB, it prints fine. However when I connect to through the print server wirelessly, i can see the printer through Applettalk and it does a test print (but it prints garbage). The problem that i see is that the drivers for HP LaserJet 1012 are not listed under the HP Model. So not sure what i need to do.
Also, how do i print to a printer which is shared by a Windows machine?
Has anyone got any direction?
Thanks

HP wrote the OS X driver so that it ONLY works with USB. To get network printing, install the hpijs and ESP ghostscript driver "set:"
http://www.linuxprinting.org/macosx/hpijs/
Add the printer via LPD or IPP (look through server manual), and be sure to enter the server's queue name, L1 or P1.
Follow this guide to print via Windows:
http://www.ifelix.co.uk/tech/3015.html

I have a HP2101nw wireless print server and it will not connect to my router.

The status of my wireless print server always says it is not connected and idle on both my laptops. I have tried to connect through the advanced settings but it does not find my router. I have tried to connect manually but it fails. Could a firewall be blocking it? My router works fine on the internet for both laptops. Any ideas?

If other wireless devices are connecting OK, you know that the AirPort Express is operating correctly since all devices are receiving the same wireless signal from the Express.
It's possible, but extremely unlikely that there will be other Samsung phone users on an Apple support forum, so I would suggest that you check with Samsung support to reset the Samsung phone back to default wireless settings so you can set up a new connection again.

Notebook using Vista and wireless print server and HP5500 printer problem

Installed std vista local driver for hp5550 printer with usb cable direct to printer. Works ok
Then, disconnected usb copper line to HP labtop and connected it into print server in router (D-link router to HP5500 printer).
Installed wireless network driver in labtop (vista os)(no updated hp driver available for Vista on HP site).
Print jobs just stack up in the que.
Used 192.168.0.1 address (which works fine for my other old win 98 computer).
Driver using the "raw" setting not "LPT"
Print Sharing is enabled.
Any suggestions?
p.s. The wirless system works fine on an old windows 98SE computer using the original 5550 installation disk.

Went back and installed the "Windows 2000 Print Server Software (from D-link Router 824vpn). I assume that this included the USP Shareport program that was recommend in a thread. I can now access router wirelessly. However, wireless print jobs go into que for hp5550, que emptys, but printer does not start up. Copper usb from printer to computer works fine (as separate printer)sta. Using HPdeskjet 5550 (HPA ) printer, port 192.168.0.1, printer name/ip 192.168.0.1, protocal 9100, raw setting, port 9100, LPR and SNMP are both blank. Any suggestions (OS is Vista). No drivers from Dlink or HP for this application. Thanks

HP Q6236A Wireless Print Server and HP Officejet 5610

Has anyone really successfully installed the HP Print Server successfully? I have tried everything I can think of to get it to work and cannot. I have Vista on my desktop where the officejet is installed and I have XP on my laptop. I have a wireless network installed using a D-Link router that has been working for several years. I downloaded the latest drivers for the Officejet and ensured that they were installed on both PCs. I followed the onscreen instructions for installing the Print Server adapter and the PC adapter on both PCs (actually uninstalled and reinstalled several times.
I got the PC adapter and the printer adapter to work one time on the desktop and then could not connect again. I downloaded the updated file for the USB disconnect problem with Vista and still no luck.
Does this HP Printer Adapter really work? I have 3 friends that also would like to have this feature and all have HP computers and HP printers but we can't get support from HP. What a shame! Any suggestions??
Thank you in advance.

I’ve installed it successfully and worked fine so far. I share a printer with other computers.
My wireless access point is Linksys router and configured with WPA2 PSK AES. And the printer is C4280.
The installations were tough and easier. It depends on the client computer situation.
Did you try followings?
Step1. Configure the wireless setting for Q6236.
1. Uninstall all of existed the printer driver and the related software, for make sure.
You can do it that the printer installer run again. Then it should show uninstall option instead of the installation and chose it.
2. Install Q6236 driver with the PC adapter.
3. Do the advanced setup and setup wireless connection. Please refer the manual.
4. Confirm network connection to the Q6236 by the utility.
The utility icon where it is right bottom corner of the desktop gets green mark when the connection is successful.
Step2. Install the printer device driver.
1. Remove the PC adapter from the computer. It is not needed any more. It is only for wireless configuration for Q6236 once. After that, you can store it in the attic.
2. Disconnect the Q6236 network connection by the utility. This is important.
3. Install the printer driver by the installer.
In middle of the installation, the installer should request you the USB connection to the printer. Then connect the Q6236 network connection. Do not connect it before the request.
For another PC to share the printer with the Q6236.
Both of the PC and the printer should be online. And do not put the PC adapter on the PC.
1. Uninstall all of existed the printer driver and the related software
2. Install Q6236 driver.
In the middle of the installation, Q6236 installer should find the printer itself and chose it.
The PC and the Q6236 should be on same IP sub network.
3. Confirm the network connection to the Q6236 by the utility.
4. Do above Step2-2.
If you do not get successful, please tell me which step was problem.

Leopard, Netgear router with printer server and Epson Aculaser C1100

Hello!
After updating to Leopard (10.5.1) all my printers were deleted. I've two printers connected to a Netgear FWG114Pv2 wireless router. My HP Photosmart is connected via ethernet to the router. It was easy to reinstalled this one.
But I still can't get my Epson Aculaser C1100 back to work on my MacBook. The printer is connected with the USB port of the Netgear router. This setting worked fine before Leopard. On Tiger I only had to set up an IP printer with the IP of the router (no queue settings requiered) and to select the correct driver.
If I try this now, my printer doesn't respond. If I choose the default postscript printer driver the data signal on my printer blinks for a short time, then the printer stops. Two Windows machines can properly print on the Aculaser. Even my WinXp running with Parallels Desktop on my MacBook can print to the Aculaser.
If I connect the printer directly to the Mac and setup the printer, everthing works fine. I called the Apple support three weeks ago (1 h) with no result. We tried all advanced options in the printer settings and I send communication protocols to Apple (recorded with a little tool from them). Untill now I've no response.
I also tried setting up differnet drivers as discussed here: http://discussions.apple.com/thread.jspa?messageID=6382269&#6382269
Thanks!
- Carnell

Hello!
After updating to Leopard (10.5.1) all my printers were deleted. I've two printers connected to a Netgear FWG114Pv2 wireless router. My HP Photosmart is connected via ethernet to the router. It was easy to reinstalled this one.
But I still can't get my Epson Aculaser C1100 back to work on my MacBook. The printer is connected with the USB port of the Netgear router. This setting worked fine before Leopard. On Tiger I only had to set up an IP printer with the IP of the router (no queue settings requiered) and to select the correct driver.
If I try this now, my printer doesn't respond. If I choose the default postscript printer driver the data signal on my printer blinks for a short time, then the printer stops. Two Windows machines can properly print on the Aculaser. Even my WinXp running with Parallels Desktop on my MacBook can print to the Aculaser.
If I connect the printer directly to the Mac and setup the printer, everthing works fine. I called the Apple support three weeks ago (1 h) with no result. We tried all advanced options in the printer settings and I send communication protocols to Apple (recorded with a little tool from them). Untill now I've no response.
I also tried setting up differnet drivers as discussed here: http://discussions.apple.com/thread.jspa?messageID=6382269&#6382269
Thanks!
- Carnell

Wireless Print Server Compatibility

I have a Netgear WGPS606 wireless print server and I was wondering if anyone knows if I can connect to it with OS X. Netgears site didn't say anything about it. Anyone know?

I had the same problem with my Netgear Print Server and there is no help directly on the Netgear website. However, a search on Google revealed the following link from one of the Netgear forums:
http://kbserver.netgear.com/kbwebfiles/N101570.asp
After following all the instructions I still wasn't able to get it to work until I did the following:
1. I use Netgear's WNR854T wireless router (RangeMax) and it doesn't seem to recognize the default IP (192.168.0.102) of the Print Server (PS). In my case, I had to change the PS's IP address so that it fell within the range set on my router; in my case it was 192.168.1.102.
2. Next you need to set the new IP address for the PS as a static address in your wireless router. Do not rely on the router's DHCP settings (if you have your router set-up this way) to properly route the printing information.
Check to make sure your Mac can now ping the PS with its new IP address. The terminal screen will show the PS continually being pinged, so once it successfully transmits its few bytes of data you can close the terminal.
3. Now follow the directions as stated in Netgear's document noting the change in the PS's new IP address. Make sure you don't input the IP address stated in the document as it was your old default address.
You should now be able to print documents.

CM1015 on wireless print server; ToolboxFX Can't access

(This is crossposted at the Business Support forum as well).
I have the CM1015 connected via a Netgear WGPS606 wireless print server. Using the Netgear installation util, the IP connection and printing to it work fine. Success there.
However, ToolboxFX can't access the printer, taking a v-e-r-y- long time to respond before throwing an error msg: The server could not find the request. (404) ...Please cycle power bla bla... Of course cycling power doesn't help.
The topic at
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=1846080&prodTypeId=18972&prodSeriesId=1846080&objectID=c00785211
seems almost relevant, but not really, as the only IP I have is for the print server, not the CM1015 itself. Needless to say, scan-to-remote computer does not work. Disabling the OS firewall does not solve the problem.
Anybody run across a solution for what should be a common problem?
The drift from other frustrated users here seems to be that using a CM1017 connected to a wireless router might get you there. But, like other midrange printers (eg certain Canons), the CM1015 was never really meant to be networked. HP seem mute on the subject...
Message Edited by seacrow on 11-24-2008 12:19 PM
Message Edited by seacrow on 11-24-2008 12:20 PM

I opted to use ".com.na" in which case the Internal Domain Name and Internet Website
now has the same name.
This ends up with a split-DNS stup for internal and external resolution which requires extra administration tasks and attention from the administrators.
When attempting to open the extarnal website eg. "www.company.com.na" from a client PC within the internal "company.com.na" Domain, I keep getting error "403 - Forbidden: Access is denied. You do not have permission to view
this directory or page using the credentials that you supplied."
I should also mention, the website is hosted by an ISP and not locally.
I added a "www" Host record in the Forward Lookup Zone, I have added the url and ip address to the Hosts file on a client pc (Windows 7) and even tried setting up Split-Brains DNS. Nothing seems to work.
Running a Tracert takes me to the correct public ip address of the website, but I keep getting this 403 error.
This means that you are able to reach the Website but it is responding with the access denied error message. That should be checked on the middleware level so if this is IIS running then I would recommend asking them in IIS forum: http://forums.iis.net/
If this is a Website that is completely managed by your ISP then I would recommend checking with them.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Printing on a Wireless Network through a Wireless Print Server Resolved

Ok,
I have been working on this all day and no one at apple could help me.
I have a linksys router with a dlink print server hooked up to it.
my macbook would not recognize the printer. if I added it manually it wouldnt print. so I was trying to find a solution myself. I was thinking if the Printer Queue Name was the issue. It was, that must be correctly entered for the printer to work. Now my Leopard will print.
Hope this helps someone.
Nick

This will not be specifically helpful, but it MAY help you get started.
I had the same problem too, when initially setting up wireless printing for my Mac Pro.
I ended up specifying the IP address of the wireless printer server and to identify the print q name, I printed out a status sheet from the printer.
Hope that helps.

Wireless Printing with Netgear Print Server and HP Officejet 6110

Setting up my wife's iMac for wireless printing (Mac is in Kitchen, printer in home office).
We have a Netgear router and her internet connection (wireless) is fine.
I configured the WGPS606 via a Vista laptop and have effectively printed through to the server wirelessly from the laptop.
I downloaded and installed the drivers for the HP printer to the mac and have successfully printed when connected via USB (brought the printer to the kitchen to test)
In adding the IP printer, I am able to set up an IP printer fine, but the HP driver does not appear in the dropdown menu.
I have been able to get the iMac to ping the Print Server and choosing another HP driver does spool, but with gibberish of course.
I believe the problem is that I can't figure out how to get the new driver to appear in the dropdown in the printer settings, which should solve the problem, I think.
Advice?
Thank you.
Message was edited by: Tauria

Unfortunately, there are two kinds of driver on OS X (not like Windows), Carbon and CUPS. To use the CUPS standard network protocols like IP printing, you have to use CUPS drivers. HP doesn't provide CUPS drivers (yet). Install the hpijs 3-part set:
http://www.linux-foundation.org/en/OpenPrinting/macosx

Sharing Linksys Wireless Print Server with MAC and PC - How to do?

I have lost the capability to share a printer on my network by using the Linksys Wireless Print Server-model number WPS54G -V2. Prior to having to return my previous Print Server on an RMA, I was able to use the MAC and PCs on my network. I have a PowerGook G4 with MacOS X 10.4.10. I also have a Airport Extreme Base Station V5.6. The printer on the network that is being shared is an Epson Stylus Photo 820. Recently, when trying to reconfigure the network, I updated the software on the Airport Extreme...so I think after that, I am no longer able to share this printer using current network configuration. As information, I will share how I got the network to share the printer BEFORE I had to replace the previous Print Server and BEFORE I updated the Airport Extreme. Please see this link:
http://www.macosxhints.com/article.php?story=20050406151311940
Even though this was for a different type of Print Server, this worked for me.
When reconfiguring the new Print Server, I contacted Linksys...as had some difficulty until I found out how to assign a static IP to the new Print Server. When trying to talk to them about the Mac issue, and sharing the printer, they shared this link with me...which may be helpful to some, but I found that this does not work for me...
http://www.macosxhints.com/article.php?story=20060404021600193
I have been trying to work through the issue, but feel I may now have some compatibility issues between the Airport Extreme and the Epson printer.
Further details are that I use 10.0.1.78 for the assigned IP address for the Print server. My router (which is the Airport address) is 10.0.1.1. I have tried IPP printing option, LPD printing option...and IPP printing at least returns a status on the Print Server as "printing" as opposed to "idle". I have checked the Print status on the Mac, and I have received two (2) different error messages as to why the print job failed. They are:
"the process "picwpstops" stopped unexpectedly with status 1"
and
"the process "rastertoprinter" stopped unexpectedly with status 1"
The latter happens when I follow the instructions on the second link I attached on this topic...with the only change being that I select IPP printing as opposed to LPD printing.
Anyone that has any insight into HOW to configure the mysterious settings for Mac OS printing so that it can be compatible with a Wireless Print Server, please feel free to comment. In the meantime, I am thinking that the links above could help some people...just not me at this point given my current configuration and versions of software/firmware and perhaps the printer I am using.
Greatly appreciate your consideration, and any suggestions to anyone that might understand what these error messages mean when checking the printer status after sending a file for printing.
Thank you

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

HP DeskJet 712c Driver and Wireless Print Server Setup

I have recently purchased a MacBook Pro and am unable to setup my printer to print. Previous to using the MacBook Pro I was using a windows machine without any trouble printing to this printer, however now I can't locate the printer on a list of pre-installed drivers for Mac. I've already checked HP's website and was unable to find any drivers that were for Mac OS. What is a good alternative driver source? Once I do get the driver what would my next steps need to be to set up the wireless print server to work with my mac?
Printer: HP DeskJet 712c
Wireless Print Server: D-Link DP-311P
I would be grateful for guidance to go about this process so that I can use my printer again.
MacBook Pro 2.16GHz Mac OS X (10.4.6)

HP-provided drivers don't support network printing. You'll need to install Foomatic (a PPD interpreter), ESP ghostscript (postscript translator) and the 712c PPD from:
http://www.linuxprinting.org/macosx/foomatic/
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-DeskJet712C
Then, since we don't have the auto-setup software for OS X, you need to review the print server manual and find out which IP printing protocol to use. The easiest is HP Jetdirect (called TCP/IP raw port printing in many manuals) if it's available, because it doesn't require the device queue name.
Good luck.

Wireless print server with Mac G4 and Dell PC's

I have a belkin wireless router and a linksys WPS54G print server. Hardwired by ethernet cables to the router are two computers 1) Dell 2400 and 2) Apple G4.
I am trying to get the Apple to print to the printserver. the linksys software set the Dell up and the print server and they work fine. I have tried everything i can on the Apple but no luck. Seems to be the driver. The printer is printing gibberish from the mac. The printer is an Epson Stylus Photo R320. I dowmloaded the drivers for Mac OS 10.4.4... from the epson website - I chose each one for the printer on my MAC and tried to print. The result was either no print out or differing gibberish each time. What can I do?

Please search this forum. Your precise issue has been covered several times. You have to use a CUPS driver for network printing - Epson's drivers are Carbon, not CUPS. Start by updating the Gimp-Print drivers that Apple included in OS X to the next newer version, now called Gutenprint 5.0.0:
http://sourceforge.net/project/showfiles.php?group_id=1537

Wireless print server that works with Macs and Epson R1800?

Hi,
I'm looking to buy a wireless print server, which I could use as if the printer was connected directly to my Mac. So basically, it just needs to have printing over IP port (like port 9100 on HP JetDirect) and drivers for Mac OS X (or ideally, no special drivers needed at all). Devices that do sharing of the printer only over LPD (older Unix), SMB (Windows), IPP (Cups / newer Unix) or similar protocols is not what I'm looking for here.
The reason why LPD, SMB and IPP are not an option is that I'll need utilities such as Epson Printer Utility to work over the network too.
It looks like Linksys, Belkin and some other have products that allow access to the printer over port 9100 (standard HP JetDiret's port) as if the printer was connected directly to the computer. However, for the most part I was able to find only success stories for Windows users.
Windows has standard driver that allows connection to the printer to be easily switched from USB port to network port. Does OS X comes standard with that feature, or is the special driver needed?
Most importantly, has anybody had success with printing from Mac through wireless print server (any brand) to Epson R1800? Did the Epson Print Utility (checking the ink levels, checking and cleaning the head, etc) work? Any special drivers needed?
Thanks

direwolf has hit the nail on the head - the Epson driver won't work for IP printing. The Epson driver is a Carbon driver, where they build the comm protocols into the driver instead of enabling use of the standard protocols on OS X (that are part of the CUPS system). You'll need a CUPS driver to use the standard network protocol(s). The printfab driver is a CUPS driver.
Exception - the Apple Extreme/Express/etc print servers have firmware that make them work like Macs - Mac-to-Mac sharing works with USB-only drivers! I hesitate to recommend the Extreme/Express, because Apple can't seem to get all the kinks out.

Netgear WGPS606 wireless print server and HP1006

Similar Messages

Maybe you are looking for