Netgear wireless router won't connect to my HP Pavilion via ethernet cable

I had bought the Netgear LT wireless router for my home and I cannot get my Pavilion PC to connect via the ethernet cable. All of our tablets will connect wirelessly as well as my laptop. The laptop will also connect using the ethernet cable. I had used a wireless broadband card on my PC for that last several years without a problem, now I can't seem to connect to the internet with this new tool. When I do try to connect, a pop-up screen appears with suggestions of using the connections from the past (ie. dial-up, broadband, mobil), but does not show an option for this new router.
Someone had suggest that I may need to get an updated driver for the ehternet card, and if so, how to I get said updated driver to instal over to my PC without being connected to the internet? I've tried to reconfigure and add a "new network" connection without any luck and have uninstalled the old programs pertaining to the old connection devices.
As of now, I'm having to download my business materials on my laptop, then transfer the files to the PC via thumb drives. I'm sure I'm just overlooking something rather simple, as it is usually the case for most, I imagine. Can anyone give me another alternative to fix this issue? I plan on leaving the PC connected to the router via ethernet, while using the wireless WiFi for the other devices.
Thank you in advance!!

Hi,
Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers. This will allow others to review your issue, make suggestions and review your responses. This is usually the best way to get assistance.  Additionally, what operating system are you using?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

  • My mac won't connect to the internet without a ethernet cable please HELP!!!!

    My mac won't connect to the internet without a enthernet cable and when I go to Network Prefrences and go to airport and try to connect that way it dosen't connect and it says: AirPort 2 has the self-assigned IP address 169.254.201.215 and will not be able to connect to the Internet. PLEASE HELP

    Try letting the router assign an IP address. In System Preferences, click the assist me button for help.
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About
    Also try turning off Bluetooth

  • Connect iMac to Airport Express via ethernet cable?

    I get poor performance using AirPlay to connect to my stereo with the Airport Express on the wireless network in my apartment building. The wireless router is on a different floor, and on the opposite side of the building, which I believe is the cause of the intermittent signal -- the music cuts out and back in constantly.
    However, my workstation is very near the stereo, so I think I should be able to run an ethernet cable directly from my iMac to the Express. How do I set this up, though?

    Hi there frustrated newbie 2014,
    You may find the troubleshooting steps in the article below helpful.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    -Griff W. 

  • How do I use time capsule as a direct backup drive only connect to my macbook pro via ethernet cable

    I have recently abandoned my cable internet service provider and am using my iPad as a hotspot via verizon wireless service.  I am trying to reconfigure my time capsule as a back up drive only connected by an ethernet cable. 
    I was able to set it up on my new hotspot wireless net, but do not want to use it that way because of the data usage impact on my verizon wireless account.
    Hopefully there is an easy answer, but it is not intuitively obvious to me. 

    Well I have to say you can do it.. but if you are plugging and unplugging ethernet, you could just as easily plug and unplug an external USB drive.. and it will be faster and more reliable than the TC.
    I explained how to do the TC as a secondary network in the posts here. Look down the bottom of the discussion.
    https://discussions.apple.com/thread/4817218?tstart=30
    If any of that doesn't make sense just post again here..
    You can also do it with wireless if you accept using a USB wireless stick plugged into the Mac.. then you have two wireless clients and can connect simultaneously to two different networks.. using the same principles as above that you remove the gateway and dns problems that arise by manual settings.

  • Connecting PS3 to airport extreme via ethernet cable. Please Help!

    All I want to do is to connect my ps3 directly to my airport extreme via an Ethernet cable. At the same time I want to be able to connect my computer/ipod touch to the internet wirelessly throught the airport extreme. Is this even possible? I dont want to add a airport extreme or extened my internet in anyway.

    All I want to do is to connect my ps3 directly to my airport extreme via an Ethernet cable. At the same time I want to be able to connect my computer/ipod touch to the internet wirelessly throught the airport extreme. Is this even possible? I dont want to add a airport extreme or extened my internet in anyway.

  • Access a NetFlix account with Samsung TV, Samsung home theatre system w/netgear wireless router

    I just want to know what is required to wirelessly access a NetFlix account using my Samsung TV & Samsung home (DVD) theatre system with a Netgear wireless router.

    Like previous poster mentioned,  for the Netflix app itself, either use built in NetApp on your tv or get it via Bluray player that has that NetApp .As for connectivity, you'll need to either get an Access Point or the proprietary Wireless LAN Adapter from Samsung. I've got both and I would recommend the AP for multiple port capablity ( more than one Ethernet jack ).

  • G4+Netgear wireless router+Xbox Live

    O.K, I have a G4 connected to a Netgear wireless router, I also have an Xbox that I wish to connect to Xbox Live, can I get the thing working with an Airport Express??
    or should I buy the microsoft wireless adapter?(If I could i'd rather buy the express)

    O.K, I have a G4 connected to a Netgear wireless
    router, I also have an Xbox that I wish to connect to
    Xbox Live, can I get the thing working with an
    Airport Express??
    No, in order to use the ethernet port of an Airport Express (AX) in this manner you need to use WDS and that is not possible with a Netgear router.
    or should I buy the microsoft wireless adapter?(If I
    could i'd rather buy the express)
    The Microsoft adapter will probably work.
    iFelix

  • How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

    What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
    How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
    Thank you,

    AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
    It works with N version airports.
    It will also show details of the AC model but cannot be used for the setup.. mostly.
    I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
    Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
    I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
    If you do not use ethernet then you are going to be forced to accept slow speed.
    EOP (ethernet over power). Also called homeplug in the US.
    http://en.wikipedia.org/wiki/HomePlug
    Provides a method of networking over power cabling that already exists in your house.
    So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
    To spell this out.
    A wireless link to an extended device will go very slowly.. if it is not direct.
    So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
    That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
    Ethernet by contrast does both at once. It is full duplex.
    Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
    Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
    When you put all this together.. there are a couple of rules for fast connection.
    1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
    2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
    3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
    Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

  • I just purchased an Apple TV.  I have a pc running windows 7.  It is connected to a router and the router is connected to a wireless router.  I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

    I just purchased an Apple TV.  I have a pc running windows 7.  It is connected to a router and the router is connected to a wireless router.  I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

    I don't mean to be facetious but sometimes the simplest things are overlooked.  To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open.  It also needs to be on the same network.  My network is dual band and works with either stream but a friend of mine does not.  He has to set the computer and the Apple TV to the same band.  Hope this helps.

  • HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    Wirelessly
    Just select the option to make your AirPort Express join an existing network in the setup process

  • My Apple wireless keyboard won't connect to my Mac mini any more.

    My Apple wireless keyboard won't connect to my Mac mini any more. Going through the Bluetooth Setup Assistant doesn't help - the computer finds the keyboard, but when I type in the pass code it fails to pair with it. The green LED on the bottom of the keyboard flashes twice at roughly two-second intervals. I've tried replacing the batteries and this has had no effect. I have all the latest software updates installed.

    Welcome Cheirhandrea!
    There are easily hundreds of variants of the iMac dating back to 1998. Many of the pre-2006 iMacs this forum covers cannot support an Apple wireles keyboard. Because this model has been in production for so long, it is important for you to let us know as much about your computer as possible so someone won't give you information that may not be appropriate to your iMac variant.
    So we need to know:
    1) Your processor type and Mac OSX version, both available by doing "About this Mac" from your Apple menu at the left end of the menu bar:
    2) The make and model of the keyboard.
    I asked for your Mac OS version because "iOS" as currently shown in your equipment profile cannot run on any Mac computer, only Apple's mobile devices. Once you get the OS version from "About this Mac," please change your profile to avoid further confusion and get help faster without the delay of someone having to ask for clarification before they can start helping.

  • Wireless keyboard won't connect to iMac, when i press the on button the green light comes on and then blinks twice, i can't type my name/password to log in, please help

    wireless keyboard won't connect to iMac, when i press the on button the green light comes on and then blinks twice, i can't type my name/password to log in, please help

    Impossible, there are zero, as in none, zip, nadda viruses for OS X. If you have viruses on it they are for MS Windows and will not affect OS X. I suspect the hard disk has crashed, if you have backup then it's not a big deal to have it changed, just take it into your local Apple Store or AASP for service. If you have not been backing it up you may be in for a painful lesson on why backup is critical.

  • Wireless keyboard won't connect to mac mini at start-up: what do I do?

    My new wireless keyboard won't connect to my new mac mini: what do I need to do?

    do you have a normal usb keyboard & mouse too? 
    have you gone through these steps?
    http://support.apple.com/kb/TS3048
    of course you need a working mouse to go through these steps....i think everyone should keep a usb set on hand to resolve these kinds of issues.....

  • Netgear Wireless Router WGT624 x3

    Will the Wireless-G Noetbook Adapter function using a Netgear Wireless router?
    Thanks,
    Blader

    I figured out what to use for the 'device name' in the netgear wireless card setup.  When I entered 'Linksys', it worked!  So I when I was entering Linksys Wireless G, I was using too many characters.
    Anyway, thank you for the quick response.  My Linksys Wireless G Notebook Adapter and now functioning with my 802.11g Netgear router

  • Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC has been turned on (PC is connected via Ethernet cable, and has no wireless capability as far as I know).  What gives?  It works fine when the PC is off.

    Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC is on (the PC is connected via Ethernet cable, and has no wireless capabilities that I know of).  What gives?  When the PC is turned off, everything is totally fine.  I\m stumped. 

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    I suspect a problem with your router. Try changing the security. First use no security as a test.
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Exporting animation using Save for Web and Devices problem

    The animation plays as it should when the "Play" button is pressed at the bottom of the "Save for Web and Devices" Menu , but when I Preview it the individual frames don't disappear once they've shown , so you can see them all at the end of the anima

  • ABC XYZ Concept at SAP ERP

    Dear friends, I want to ask whether SAP could provide this process. The goal of this process is my customer want to maintain stock effectively. My customer have a process to update the service level automatically based on the call ( number of SO and

  • Photos sync, but arn't visible on my ipod touch, instead a white box appears, plz help.

    Hello, my ipod touch does sync photos from my pc but they can not be seen, instead a white box appears, although photos under "saved photos" r still visible plz help me.

  • How to Implement Dynamic Tree structure in jsp

    Hi, Does any body help me to solve out my requirement?? I want to display all my folder contents (parent & childs) in windows explorer format, the root folder path will come from database. Thanks in advance

  • Mulitple row edit in Datagrid question

    Hi I'm playing around with different ways to edit a column in multiple rows, and I'm wondering if there is a standard way of doing this? Currently, to edit one row, I'm doing this (simplified idea of my function): private function data_gridClicked(ev