NetInstall image not installing on Mac Pros from Snow Leopard server

Using the System Image Utility, I created a NetRestore image from the Mac Pro machine that was configured in the way that we wanted it (applications, etc.). I copied this image to the server (Server HD 3), and configured in Library/Netboot/NetBootSP0. The image is in Base Image.nbi, and I have NetBoot set up in serveradmin. I have this set up in the images tab in NetBoot:
Default is checked;
Image Name: Base Image;
Enable is checked;
Diskless is not (we're wanting to 'restore' this image on all 17 MacPros)
Index is 2323;
Arch is Intel;
Protocol is NFS.
Comment box info:
Storage Volume: Server HD 3
Kind: Mac OS X NetInstall (Intel)
Language: default
Description: NetRestore of Mac OS X 10.6.2 (10C2234) Volume.
Type: NFS.
When I go to one of the other computers, go through system preferences and select the "Base Image" to restart from, I get a gray screen; then the globe flashes, and then the machine will go to the local hard drive to start up.
The reason I went to a NetRestore image was because the system image utility would not create a netinstall (greyed out) from a volume.
Is there something I am missing here?
Message was edited by: smaugg

So glad its you Mr. Hoffman - your guides are most helpful - thank you so much for what you do.
I did some digging and found out that since im running CS4 and that it trys to run on 64 bit mode but my Lion system and most folks systems I guess are in 32 bit mode - i had to down load some 32 bit Adobe Unit Types from Adobe and replace the ones on my system - restart - and bingo - im no longer getting those errors - see this link where i found this work around:
http://kb2.adobe.com/cps/516/cpsid_51615.html
That fix cleared a lot of the junk that adobe was doing but i am still getting error 1101 - see below
11/26/11 2:36:37.298 PM opendirectoryd: peer appears to be running Mac OS X 10.6 or earlier
11/26/11 2:36:37.298 PM opendirectoryd: got error 1101
Any idea what this is ?

Similar Messages

Text messages in Safari are garbled on Mac Pro after Snow Leopard install

When reading or composing my Yahoo mail text messages in Safari on my Mac Pro after Snow Leopard, the wording is very garbled. Looks like o's, s's, c's, some caps, with lots of spaces intermixed. Messages look ok on Firefox, on same machine. New messages and reading sent messages look ok on my MacBook and MB Air. When cutting and pasting into something else (like this window), the text looks fine. I can compose and send messages that look garbled, but the right words and letters go out. HTML messages look ok. Any clues for solution?

I have this happening in bunch of different HTML pages. Here's a screenshot of the same page in Safari (Version 4.0.3 (6531.9)) and Mac OS X 1.6.1 side by side with Camino:
https://dl.getdropbox.com/u/362958/miscwebimages/Screen%20shot%202009-09-22%20at%2018.35.47.png
Camino renders the page correctly. Safari is really unusable with this problem. Tried switching to and from 64-bit mode in Safari, didn't help either.
Message was edited by: Attila Szegedi

Want new Mac Pro With Snow Leopard

I am after a new Mac Pro with Snow Leopard.
I understand that some of the newer Mac Pros can have Snow Leopard installed. Some tell me that in the recent past Apple made a change that made installation of Snow Leopard difficult or impossible on a Mac Pro.
Does anyone know with a reasonable degree of certainty how to tell if a given Mac Pro can have Snow Leopard installed?
I called Apple about a refurbished Mac Pro, they don't know what operating system it will come with! And they don't know if it will include OS installation disks.

For what it is worth, I recently went through this drama.
Well, it's worth a lot!
it is theoretically possible for Apple to modify the firmware to prevent Snow from booting, but my experience is that this has not happened yet.
How long ago did you purchase your Mac Pro? (I miss the old days, when users would modify their own firmware.)
See if you can buy from a seller who will let you test this out. There are some nice retailers out there, especially when you are dropping $1000s on a new Mac Pro.
I've been looking for a while now, Mac Pro sellers that have Snow Leopard know how valuable there machines are. There are no bargains if you want snow leopard.
We couldn't install Snow directly on the Mac Pro, so I installed on another computer (an older Mac Pro), and updated to 10.6.8 and swapped the drive across. This worked without issues.
I currently own a 2008 Mac Pro (2,1) with 10.6.8
See if you can buy from a seller who will let you test this out.
Why not Apple? They have a 15 Day return policy. When I called Apple recently the person I spoke to suggested this.

If I upgraded my MacBook Pro from Snow Leopard to Lion via the web and now wish to erase the hard drive and restore it to factory settings to sell. How do I accomplish this?

I upgraded the operating system on my MacBook Pro from Snow Leopard to Lion via the web. Now I need to erase the hard drive and restore it to factory settings, so that I can pass it on. How do I accomplish this? When I insert the Mac OS X install disk, the only option is to erase the free space. Any insight would be appreciated.
Thank you

You need to boot off the original Snow Leopard DVD's that came with the system.
Once you are running off of the DVD you will be able to do a clean install of SL
To boot off the DVD with the system up running Lion insert the DVD. Open Sytem Preferences->Startup Disk and select the DVD then restart the machine.
Message was edited by: Frank Caggiano

What are the minimum hardware requirements to install both MAC OS X Snow Leopard and Windows on a Mac

Hi,
I want to install both MAC OS X Snow Leopard and WINDOWS on a same PC. Is it possible..then mention the minimum Hardware support to install both Operating Systems on a PC. I am waiting for relevant reply from Apple Support Team.
Thank You.

I am waiting for relevant reply from Apple Support Team.
Then you'll be waiting a long time. This is a user to user support site hosted by Apple. The Apple Support Team doesn't respond to posts here.
For Snow Leopard, you need an Apple computer with an Intel processor of any flavor. Here are the specs from the Apple Store:
System Requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
You'd have to contact Microsoft to find out what specs its OS requires, but I imagine the above would cover it.
Also note that Snow Leopard is only licensed to run on Apple branded equipment.

Mac Pro with Snow Leopard instead of Lion?

Planning to replace an aging G5 with new Mac Pro. The machine's primary usage is editing in FCP (not FCP X). Most projects are long form and I'm in the middle of one right now that will be in post for the remainder of the year. Can I get the new Mac Pro with Snow Leopard (running 10.6.8 currently) instead of Lion to avoid potential issues moving the project over?

martyver wrote:
...Can I get the new Mac Pro with Snow Leopard (running 10.6.8 currently) instead of Lion to avoid potential issues moving the project over?
Not if you buy it new. All of them come with Lion. However, the current Mac Pro's originally shipped with Snow Leopard, and while it's not entirely clear, it may be possible to install Snow Leopard on a new Mac Pro. There are a number of threads here discussing that but the Cliff's Notes version is that the 2010 Mac Pro requires at least 10.6.4, and the last retail version is 10.6.3 so the retail installer won't work. If you can't get Apple to send you the Snow Leopard installer that once shipped with the Mac Pro, posters have said you can't use 10.6.4+ installers specific to another recent Macs to do the job. However, there is a discussion here http://hints.macworld.com/article.php?story=20120123175902871 which explains how that can be made to work. I haven't tried it (I got my Mac Pro while it was still shipping with SL), I don't know if it would actually work, and I don't know if it's even legal, but there it is.

Will firefox 5 run on a mac pro running snow leopard

I like FF but am concerned whether it will run on my mac pro running snow leopard, since the download information says it is a windows program.

Snow Leopard being Mac OSX 10.6
You need to download the version for Mac, not the .exe which is for Windows.
www.mozilla.com or if you prefer a certain language no given then look at http://www.mozilla.org/en-US/firefox/all.html and look down the middle which is Mac OSX.

FreeHand MX on the new Mac Pro under Snow Leopard?

Just wondering if anybody is managing to successfully run Adobe (Macromedia) FreeHand on the new Mac Pro under Snow Leopard?
We often need to access a lot of archived FreeHand files and are wondering whether we should keep an old G4 tucked away just for this job when we next update our Macs.
Thanks,
Jona

Hi jona;
A quick Google search produced a number of sites such as this one that basically say that freehand doesn't do so well on Snow Leopard. You suggestion for maintaining an old G4 sounds like a good one to me.
Allan

Can I image Lion clients from Snow Leopard server using SIU?

I have a new iMac Lion client I need to image to a number of machines, using Snow Leopard Server, but System Image Utility will not recognize the Lion client as a valid source volume? Has anyone else experienced this yet?

Images must always be created on the same OS.
You'll need to download the Lion Server Admin Tools onto one of the clients and make it your "imaging system".
http://support.apple.com/kb/DL1419

Upgrade from Snow Leopard Server to Lion Server hangs at configuring services...

I am running the Mac mini with snow leopard server 2.53 ghz 2GB of ram, 2x500GB hard drives, and have followed through the process to install Lion Server. The installation appears to be hung at the Configuring Services section of the setup process. I have left it for a couple of hours and nothing has progressed.
Should I leave it longer, hoping that it will work through the process (if in fact it is working through something)?
How long should this normally take?
As this is my work server, hosting mail, web, FTP, and file sharing, it is rather important to get it up and running as quickly as possible.
Any thoughts on how I can get it moving?
Hard power off of the Mac Mini reboots the machine, then proceeds back to the setup page, and then hangs on the same Configuring Services.
Any assistance would be much appreciated.
Thanks.

Lion Server Upgraders,
beware and proceed with caution.
Apple web site is naively optimistic on the upgrade process:
"To upgrade your Mac to OS X Lion, you don’t need to drive to a store, bring home a box, and install a bunch of discs. All you do is click the Mac App Store icon, buy Lion for $29.99, and your Mac does the rest. Just make sure you have what you need to download Lion to your Mac."
And then has a 3 step process...
This is completely miss leading.
Read this document first: http://manuals.info.apple.com/en_US/lion_server_upgrading_migrating.pdf
It will make it readily apparent that moving from Snow Leopard Server to Lion is not going to be simple.
Having done this twice now.. I have found that:
1. Open Directory migration is a weak point. Lion & Snow Leopard Open Directory are not compatible, so if you have masters & replica then expect trouble. I have an unresolved issue trying to get a simple Lion Server to Lion Server Open Directory replica up and running. This compatibility seems to also cause migration to fail, as I found that all my local User/Groups transferred ok but non of the /127.0.0.1/LDAPv3 (Open Directory) ones did. This is a very important item, as all the mail accounts in dovecot use LDAP generated UID, so you have to be careful that you do not loose mail accounts.
2. Mail - your mail aliases will not transferred, so you will need to reapply the aliases.
3. Web Server Setup - This broke, under migration as I gather the entire Web serving tree has changed. In particular I had "Snow Leopard" Web Mail (which is based on Squirel) on my "Snow Leopard" Server and this is now dead...
4. Digital Certificates - I found that the valid (ie signed by trusted CA's) did not get migrated, so I had to re-imported my Digital Certificates. If you have paid for third party CA certificates then make sure you have got these copied somewhere, as if you loose them then you will likely need to go to your provider and get a certificate revocation and new certificate, which will cost you money!
Cheers,
Zebity.

Complications migrating from Snow Leopard Server to Mountain Lion Server.

I'm migrating from Snow Leopard Server to Mountain Lion Server. The article "OS X Server: Upgrade and migration" (http://support.apple.com/kb/HT5381) says
"Make sure that any DNS or DHCP servers on which your server depends remain running during the upgrade"
This advice is reinforced by the details of the article "OS X Server: Steps to take before upgrading or migrating the Open Directory database" (http://support.apple.com/kb/HT5300).
As the server I'm migrating from provides these services it will need to be running during the migration process. This would seem to limit my options to doing the migration from a Time Machine backup (or, making a seperate clone of the server's drive and connecting it externally to the new box)
My main concern is the seemingly inevitable clash that is going to occur on the network as the new server takes on the roles of the old one - while it is still running.
What are my options here ?
This is my second attempt as on my first try I did the migration from the TM backup with the network down - and none of my local network users or their home directories were migrated, although the settings for the mount points were, but there were no actual directories where they pointed to!
Clear directions on how to procede would be VERY MUCH appreciated
Thank you.

Moving from Snow Leopard to Mountain Lion means first installing the client (non-Server) version of Mountain Lion and then install Server.app this means that for at least part of the process you will not be running DNS, DHCP or Open Directory.
If you are going to end up using the same DNS name and IP address after the change then an approach you could follow would be as follows.
Destroy any Open Directory replicas
Archive your Open Directory Master (to make a backup)
Note down your DNS records in case they get messed up
Export via Workgroup Manager your users, and groups (you might not need this but better safe than sorry), make sure you do not include the diradmin account
Keep a full back of the server (you should always have backups)
Note down your DHCP server settings in case they get messed up
Note down any other service settings
Install Mountain Lion
Install Server.app
Install Workgroup Manager (extra free download)
Run Server.app
Make sure settings for services are as much as possible the same as before
If your lucky that may be all you need to do, otherwise...
Restore Open Directory archive, if your lucky that will be all you need to do, otherwise...
Make new Open Directory Master
Run Workgroup Manager
Import users and groups you previously exported
You will then have to set passwords for each user as these are not preserved via Workgroup Manager export
When I did this, I was also being forced to change all my IP addresses so I had no choice but to use Workgroup Manager to export and import accounts.

Moving accounts from Snow Leopard Macs to Mac mini with Snow Leopard Server

I got my brand spanking new Mac mini today with Snow Leopard Server! So far, we (at home) were managing our accounts on individual iMacs and a MacBook Pro. While I will be getting into the innards of account migration, management etc. I thought I'd post a quick question here; Currently I have an iMac with three user accounts on it (wife and two kids). I also have my own personal MacBook Pro with my account (the only Admin account) on it. We'll soon be getting another iMac for our daughter (who currently has an account on the existing iMac). My idea in getting the Mac mini was to move to and centrally manage all the user accounts in the household on the Mac mini server. What is the best way to accomplish this? What is the best way to move the existing accounts on to the server?
Additionally, I'll be looking into connecting the two stationary iMacs with Powerline Ethernet (where one runs Ethernet over existing electrical wires in the walls). My other option would be to rely on wireless network (I don't think this would be a good idea for if I am going to be placing the user accounts on the server and there needs to be a constant on, reliable connection between the server and the client computers as they will be talking to each other a lot!). Any thoughts on Powerline? (I am not looking forward to installing Ethernet cabling behind walls :o))
What say the wise men of Mactopia?!
Thanks,
Kenneth.
P.S. I had earlier accidentally posted this in the corresponding section of Mac OS X instead of the Mac OS X Server forum.

Ok so the esiest way to explain this is to tell you what i just went through.
I have 3 user accounts. All the accounts are network Users meaning that there home folder are kept on the server. I was having a problem with Time Machine giving me error 41 and error 11. After scratching my head for 2 days I ended up copying (Drag-n-Drop) the Home Folders to an External Hard Drive. I then proceeded to erase both of the internal hard drives on the mac mini and did a fresh local install of the Server OS.
Everything was fine at that point. Now this is where Snow Leopard stopped being nice.
I went and Created the user account again using WGM. I let WGW create the home folder and the 9 folder inside. I made sure the short names were the same and the passwords were the same as they were previously.
However, once i Copied files from the external drive to the home folders the permissions copied as well, Which i guess should be expected. So now at this point apparently the UID's of the newly created users wasn't the same as they were before the clean install. I have multiple instances of root listed in the ACL for several folders and also had several instances of System listed sporadically.
Now, This isn't to say that you can't drag n drop because now That I have it all squared away and everything is now working ok, I would probably still drag n drop the home folder off to an external disk, but only because I now know what to do to clean things up.
if you drag and drop be sure to use the CHOWN command and theCHMOD commands afterwards. Take a look at this MacFixIt article: http://reviews.cnet.com/8301-13727_7-20013630-263.html?tag=mncol;title
If you copy your local imac users to the home directory on the server you may want to follow the steps on the URL I gave plus you will most likely also have to do the following. In a nutshell you are going to use the chmod command to strip all the ACL Permissions then you are going to use the chown command to re-specify the correct owner and the correct permissions for the network user.
!) Go into ServerAdmin and click on Sharing
2) Go to the users folder you are using and select the user you are going to work with.
3) Click on the Permissions option
4) click on the +sign at the bottom (this will open the users & groups list to the right)
5) Drag the current user from the users list to the owner permissions line under posix section
5a) Click Save
6) Click on the Gear button at the bottom
7) Check the box for Owner Name and Owner Permissions.
8) Uncheck the box for Access Control List then click ok
Once you've gone through that rigmarole you can go back into ServerAdmin and fix the permissions for public and Sites folder which should only take a minute or so.
So the moral of this story and as I found out when i ended up calling Enterprise support is that the act of dragging and dropping user home directories from one server to another, or as in your case, from a local machine to a the server isn't anything that apple recommends or supports. you might want to read through the man pages for "Ditto" or so apple tells me, but honestly now that you know, the steps above aren't all that bad. It's true Knowing IS half the battle!
have Fun!
P.S. FWIW If you run into problems and have to call Enterprise Support be prepared for them to tell you to refer to the user Guides. So reading those would be to your advantage even though they aren't the easiest things to understand unlike apple's consumer products user guides

Can I upgrade my MacBook Pro from Snow Leopard straight to Mountain Lion, or would it be wise to get Lion as well?

I am currently in the process of upgrading the operating system on my girlfriend's MacBook Pro (Model Identifier: MacBookPro5,1). I have purchased and installed Snow Leopard successfully, however I would like to upgrade to the latest operating system, which to date is Moutain Lion.
Am I able to do this?
Is it wise to perform such an upgrade on this model of MacBook Pro (can it handle it)?
I have heard that I can upgrade straight from Snow Leopard to Mountain Lion. What are the advantages and disadvantages of doing this? Will I lose anything at all by not installing Lion before Mountain Lion?
Thanks for the help everyone. Hopefully I can get these questions answered soon.

And the only way to figure that out would be verifying my disk using the Disk Utility?
Thank you for that. If I am not missing out on anything by skipping Lion then that will be my option. A few extra dollars in my pocket is always a good thing.

PSE 8 will not install on new imac OSX Snow Leopard

28. Feb 26, 2010 4:16 PM in response to: docmark86
Re: PSE8 will not install on Mac Snow Leopard 10.6.1
I have a new iMac 21.5 screen with OSX Snow Leopard. I installed IWork and turbo tax with no problem. Nothing else.
PSE 8 installation fails after about 80% installation just as install for PSE 8 starts. I've spent hours on the phone with Adobe and they blame it on OSX Error analysis states: "Uncaught JavaScript exception: Unable to read Adobe file version for path /Library/Fonts/MinionPro-Bold.otf Apple techs have also tried." The latest communications from Adobe instructs me on validating fonts. We have also tried CS3 Clean Script since the install failed several times. Case # is 0181442609. Nothing works and Apple techs are still researching. Any suggestions from an Adobe professional? I am new to the Mac environment so any complicated actions may require some "hand holding".
Thanks to all!
Doc

Doc, I would suggest go to the font location which from your post is: <Macintosh HD>/Library/Fonts/MinionPro-Bold.otf. There should be a font file with this name. If it exists, just "cut" it from this location and paste it on the desktop for some time and then try to install PSE again and see if that works.
If the font file doesnt exist and instead an empty folder names "MinionPro-Bold.otf" exists, then delete the folder and then try to install PSE again.
In either case, please do attach the installer log file in the forum thread so that I can have a look at it. They can be located at the below location:
<Macintosh HD>/Library/Logs/Adobe/Installer/"...Adobe Photoshop Elements 8.0...."
If there are multiple copies of the installer log files, then please delete them and then try to install PSE 8 again. If it fails, quit the installer and attach the new log files which are generated to this thread.
Regards,
Ankush

Restore Mac Mail from Snow Leopard Back Up

Hi, I've just upgraded from Snow Leopard to Mavericks and I'm going through the process of restoring bits and bobs from my time machine back up. I did a clean install which I though might help my machine as it's been getting a bit slow recently.
Can anyone help me with restoring my mac mail to a 'how it was state', I have my time machine back up created in Snow Leopard and I also archived each mail folder seperatley (.mbox) to be double safe. I'm not sure of the best and most efficient way to restore all my mail accounts, hopefully someone on here can help.
Many thanks in advance.
Terry

Thanks for the help. I ended up importing each mailbox (mbox) seprately. When I tried to import 'apple mail' it choked in the process probably because they are pretty big files. But it worked though the import mbox option ok.

NetInstall image not installing on Mac Pros from Snow Leopard server

Similar Messages

Maybe you are looking for