NetInstall not installing all packages

Hello,
I am attempting to create a NetInstall image that installs iWork and iLife with all of the required updates. Most of the 10 or so packages that I have to get these applications as up to date as possible run correctly - however, some do not. Specifically the iPhoto updates (9.1 and 9.4.3) and iMovie (9.1 I believe) do not install. Other apps, like all of the iWork suite and iDVD and iWeb install and update normally. This is all under a Mavericks installation source and NFP instead of HTML. Is there any way to search through a log post-install to see what issue is occuring, or how to tell what is going on? The order of the updates to be installed is correct. They also install normally once the computer has finished installing and gotten to the desktop.
Thanks!

Some packages are not designed or tested to run in background sans desktop. One way to get around it is use the JAMF Composer utility to re-package the app. The utility will audit an install of several packages keeping track of all file changes. Then it will produce a new package that can be used while imaging. It costs about $100.

Similar Messages

How install all package's optional dependencies

hi to all
what is the command, or better the pacman switch, to install all the package's optional dependencies ?
thks
Last edited by nTia89 (2010-08-07 09:22:00)

nTia89 wrote:
hi to all
what is the command, or better the pacman switch, to install all the package's optional dependencies ?
thks
I'm not sure there's one. It's being worked on, but as far as I know pacman 3.4 doesn't have it.

Is it possible to not install all the software in CS6 Adobe Master Collection?

Is it possible not to install all the software available in CS6 Master Collection as my computer does not meet the requirements of one of the software which is Adobe Speedgrade?

Yes, the installer will only show the software which will install on your computer.
If you have a 32 bit system (hence no Speedgrade) then be aware that Premiere Pro and After Effects also are 64 bit only and will not install on a 32 bit system.

I INSTALLED BETA 5 AND 6, IT WORKED OK BUT I KNOW BECAUSE I DID NOT INSTALLED ALL THE BETAS SOMETHING IS MISSING

I HAVE INSTALLED YOSEMITE AS A TESTER USING MY APPLE ID, APPLE SENT MY BETA 5 AND 6. I WANT TO KNOW WHAT HAPPENED TO BETA 1 TO FOUR? I INSTALLED BETA 5 AND 6, IT WORKED FINE BUT I KNOW SOMETHING IS MISSING OR NOT UPDATED BECAUSE I DID NOT DOWNLOADED ALL THE BETAS. I GO TO SYSTEMS PREFERENCES AND SOME OF THE ICONS IS NOT UPDATED TO YOSEMITE ICONS. IN MY APP STORE I RECEIVE IN THE PURCHASES SECTION BETA 4, I TRY INSTALLING IT BUT NOTHING HAPPENED

Hi ..
Beta testing is finished.
Click: Updage Now here > http://www.apple.com/osx/?cid=wwa-us-kwg-mac-com
You can install Yosemite right over beta.

VS 2015 CTP VNext - NuGet not installing to packages directory

During a package install with NuGet it will add a reference to the package within project.json, create a reference within ASP.NET 5.0 Reference view but with an alert icon. The alert is due to the package missing from \.kpm\packages. I've had to manually
install the package to the directory, however, this is now causing this error.
"An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does
not enable CAS policy by default"
The package manager was working, however, I installed NEST and experienced errors with that and any packages from then. Any ideas how to fix this?
I've tried running VS in administrator mode to get the install working but no luck.

Hi Stephen,
Thanks you for posting in MSDN forum.
Based on your issue, since VS2015 CTP Preview is previews for the next major release of Visual Studio, currently we forums don’t provide support for VS2015 CTP Preview. So the product team would accept the suggestions or feedbacks for the VS2015 now.
So you can submit the feedback/suggestions to Microsoft Connect feedback portal:
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx, Microsoft engineers will evaluate them seriously.
After you submit the feedback, you can post the link here which will be beneficial for other members with the similar issue. And I will help you to vote it.
Thank you for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

CS3 install on Vista issues. Not installing all apps, just MM stuff...

I'm having CS3 install errors/issues too with Vista.... I've uninstalled CS2 Creative Suite on my laptop to be able to update it to the standard I have in my shop (4 computers running their own license of ProdSuite:CS3 = $3996 of Adobe product) and my understanding is we can also install on second computer, which I want to do on my new laptop (Windows unfortunately Vista).
I uninstalled CS2, I've run the Adobe CScleanup app. And then go to install CS3 suite and it acts like it fully install until the end. I then get the 'Failed components' which happen to be all the Adobe stuff: InDesign, Illustrator, PScs3ext., Bridge. All the Macromedia stuff installed: Dreamweaver, Flash.
So, what's it take. When I call Tech support of course they want $40 to solve this. Which ticks me off because I've spent a fortune with this company and all I want to do is use it on my laptop so I can work with the files while out of the office.
Anyone know the trick to install (yes, I'm installing as Administrator and it's the only login) on Vista?

Yeah, I've done that search 'CS3 Vista install' and I've followed all of what I've found and yet still have issues.
I may just spend a weekend, format the laptop and reinstall Vista and all of my apps all over again. So far I'm not getting anywhere with the uninstall of CS2 and install of CS3. Getting too many errors and wasting too much time.
If I go from a fresh box I'll not install anything first until CS3 is fully installed. Then install all my other needed apps.
Any thoughts prior to me doing this (which is a ton of time)?

Quick Q: Installing all packages?

Quick question really. For the main installation, do you guys install all base/lib/support and extra or just the base and a few other selected ones and does installing them all make any real world difference?

I only install base, no special reason actually. If your internet is slow, it'll be quicker to install some packages you need from the CD, afaik that's the only difference.

Install all packages from a given repository?

Is there a way to install every package from a given repository? For example, say I wanted to install every package from core (or at least every non-conflicting package, since systemd-sysvcompat is an issue)? I thought maybe something like '# pacman -S core' might do it, but it didn't.
Back when AIF was still around, I could do this by checking everything at install time, but now it's a multi-step process to collect all the packages and then install them.

For me, I found I was using most of what was in [core] and it was easier for me to just install everything in it than to weed out the handful that I didn't need. Yes, I know there are _that_ many packages in [core], I'm just _that_ lazy.
In another scenario, I could see someone wanting to have an uber-system with absolutely everything possible and available installed. I used to do this a few years back with distros like Fedora where I would do a complete install.

Itunes 8.02 will not install all the way... will not recognize iphone

I attempted to "upgrade" to itunes 8.02 from 8.01, at first the installer would not even start installing. I uninstalled all apple software, ie: quicktime, itunes, mobile device service. Downloaded the 64bit vista version of itunes and started to install, the installer got through quick time and itunes. In fact itunes is working now and says its version 8.02, it was a little odd that all my songs and settings where still in there though (might be a new feature?) needless to say the installer stop when it said publishing information and performing the services install.
When I connect my iphone the error says: "iphone cannot be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64-bit version of itunes." Now the default folder for itunes is /program files(x86) which means it was installing it as a x86 app, when i attempted to change the folder for just the /program files folder where the normal 64bit apps go, the installer crashes on me......

you may need to intall it the way I did, it might just get it to work.
see http://discussions.apple.com/thread.jspa?threadID=1798539&tstart=0

Zone create not installing all zone root files

I'm installing a new T5240 Solaris 10 u6 10/08 with the 10_Recommended patch kit from 09 Dec 2008. The system is jumpstarted with /, /usr, /var, /export/home on SVM mirrored internal 146g drives. When I first got the server up and running, I tested zone creation with a default zone setup:
zonecfg -z test
create -b
set zonepath=/export/home/zones
set autoboot=true
add net
set physical=nxge0
set address=192.168.103.254
end
verify
commit
exit
zoneadm -z test install
Preparing to install zone <test>.
Creating list of files to copy from the global zone.
Copying <139100> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1164> packages on the zone.
This worked, so I removed it and continued with the server configuration:
The nxge0 interface has been configured with 802.1q vlan (nxge103000) and is successfully on the network. I configured MPX/IO on the pair of fp interfaces. I've added a disk from our HP EVA SAN array and created a ZFS pool and filesystem for the zoneroot, mounted at /opt/zones/zoneroots/oraprod1.
Now, when I try to recreate the test zone it now fails to copy all of the required files to the root, puts many errors into the install log about files changed in the global-zone root after installation and won't boot the zone past single-user maintenance mode.
The zone create now shows: (after adjusting the phys net i/f name)
bash-3.00# zoneadm -z test2 install
Preparing to install zone <test2>.
Creating list of files to copy from the global zone.
Copying <78> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1165> packages on the zone.
When I zlogin to the zone after it's booted into maint, it's obvious that many root fs files are missing - including
most of the SMF service manifests.
I've searched for forums, mailing lists and sun support knowledgebase without finding anything similar.
What am I missing?

Yes, I've reproduced the problem with and without the '-b' option on create, on UFS as well as ZFS filesystem and on /export/home/zones on the local drive.
My plan now is to walk thru the configuration process one step at a time, trying to create the zone at each step. I re-jumped the server last night and created the zone correctly. I then removed it, installed patches in single user, rebooted with "-r" and was able to recreate the zone. I've enabled mpxio and i can still create the zone. Next up tonight is to add the 802.1Q configuration, add the ZFS rootzone and run our custom scripts that to server hardening, user setup, etc.
There was one bug report that sounded "interesting" having to do with a patch set that wasn't zone-friendly as it left patch files in place w/o fixing the manifests so when the zone create ran it found files that didn't match the checksums or whatever is used to validate file correctness when copying files into the zone.
I'll keep updating this with my progress and findings.

Use testing branch but not on all packages.

I use testing branch w/o no problem but I want to disable some packages being fetched from testing in favour of core/extra. For example openoffice-base (I want stable oo). Is there some way to select packages that are not get from testing?

Hi there.
I don't have a general solution to this, but for one package you might want to try the following:
If a package name exists in more than one repo, the repo can be explicitly specified to clarify the package to install: pacman -S testing/qt
Taken from the manpage of pacman.
So if you want to explicitly install openoffice from the "stable" repositories you might want to do this with
pacman -S extra/openoffice-base
I don't know whats happening when updating, unfortunately, but I guess pacman will try to update the package from the same repository it was installed.
Cheers,
mfa

Acrobat Pro XI not installing with packager

Hi all,
Anyone else having a problem with Acrobat Pro XI installing with the CC packager?
We had it originally with a larger install package but there's no .exe for it anywhere.
It shows up in the Add/Remove but can't run it.
Tried creating a separate package with just Acrobat Pro XI and that didn't work either.
We're thinking it might have to do with the existing Adobe Pro 9? Or Adobe Reader?
Anyone else having this problem?
Thanks,
Jeff

Some links that may help
-Team Installer http://forums.adobe.com/thread/1363686?tstart=0
http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent
Creative Cloud Enterprise License Restrictions https://forums.adobe.com/thread/1489872

I had a crash of the mac 10.4.11 after I restarted my comp the google toolbar vanished and i can not get it back it does not install ((( all my bookmarks are there

I had a google toolbar on my 3.6 firefox for at least one year . After my Mac crashed and I restarted everything it vanished and i can not get it back I tried to reinstall it does not work and when i go to add ons it tells me it is not available for 3.6 Firefox All my bookmarks re there (((

Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.

AE CC not rendering, chronically slow on start up, quicktime not installing, all on a trial copy

I have just downloaded AE CC trioal on to my new iMac.
on boot up it is chronically slow, but eventually it loads and shows a warning of no quicktime loaded......
looked at a discussion here saying to remove file to trash , but this file doesn't exist in my quicktime folder......
I have made a piece of work and when io go to render it gives me an error code of 39::99
, so i have no way of rendering and am not technical enough to work out what to do. Please help someone

How to view the ~/Library folder in Mavericks | Macworld
You need to look at the USER library folder. You can also view a link to the library folder by going to Finder>Go and hold down the Alt/Option key.

Adobe Flash player not installing all the way?

My Macbook Pro is saying I need to download the Adobe Flash player. I've tried more than once too install it, but everytime it goes to 50% and says close applications and there isn't any applications open during the time. I've getting very frustrated with it. I have a Macbook pro late 2011...

DON'T LISTEN. YOUR MAC WILL NEVER SAY THIS. IT MIGHT BE A SCAM. ONLY DOWNLOAD ADOBE FLASH FROM THIS LOCATION:
http://get.adobe.com/flashplayer/
I hope I helped.
Austin

NetInstall not installing all packages

Similar Messages

Maybe you are looking for