Netinstall - Trying to Customize Package Selection

I am trying to create an image of Leopard (client) to do NetInstall's so I can upgrade a bunch of laptops around our school. I would like to make the process automated, but when I add "Customize Package Selection" to a workflow, no packages show up in the window. I'm probably doing something wrong, but I can't figure out what it is.
I am creating this image from a Leopard DVD and using a Leopard equipped Macbook to create the image. I will move the image over to a Leopard equipped Xserve once I have it created.
Thanks for any help you can give.

Same problem here... but I am using an ASR image instead of the 10.5 DVD. I am not able to create a NetInstall image that includes packages on my 10.5.4 Server. I reapplied the 10.5.4 combo update just to be sure I was not missing something but, alas, still no workflow.
You may wish to use Automator instead to handle the package distribution.
Sorry, not what you wanted to hear.

Similar Messages

ISE 1.1.2 - Agent Customization Package

Hi there
I have created a NAC Agent Customization Package and sucsesfully uploaded the 'custom.zip' file to - Policy>Policy Elements>Results>ClientProvisioning>Resources.
However, when I try to edit my Client Provisioning Policy and select AgentCustomizationPackage, my custom package dosn't appear on the drop down list, so i'm unable to select it!
Anyone any ideas?
Cheers
Tim

Hi Tim,
It is possible to us Agent Customization Packages using temporary "Update Feed URL" in "Administration" --> "System" --> "Settings" --> "Client Provisioning". If you use attached file as example the "Update Feed URL" will look like http(s)://fqdn/provisioning-update.xml
You may use attached files as example, this one includes the Cisco logo.
Regards, Jan-Willem Molenaar

Wordpress locally with MAMP and when I tried to customize my permalinks I get this message "If your .htaccess file were writable, we could do this automatically, but it isn't so these are the mod_rewrite rules you should have in your htaccess file.

I installed MAMP Pro and Wordpress locally and when I tried to customize my permalinks I got this message "
If your .htaccess file were writable, we could do this automatically, but it isn’t so these are the mod_rewrite rules you should have in your .htaccess file. Click in the field and press CTRL + a to select all."
Where can I find the .htaccess file?

Have you tried there Forums?
MAMP Forum • Index page
WordPress › Support

Error during execution in background: No Test Package Selected

We have created a test package and tried to run both in foreground (Goto -> Automatic Test -> Execute) and background (Goto -> Automatic Test -> Execute in background). We are pretty confident that the test case included in the package works well.
Foreground run is successful. However, when we try to run using background mode, we get the error "No Test Package Selected." What could be the possible issue for this?

Unsigned applets are not allowed to access the file system...
http://java.sun.com/developer/technicalArticles/Security/Signed/

Timeout when I trying to compile Package

Hi
When I tried to compile package show me error:
timeout ocurred while waiting to lock Schema.Mypackage

1. Verify whether the package is locked by another user:
SELECT * FROM v$access WHERE object = '<package>';
If there a row is returned, the package is still locked.
2. Use the SID which is returned and check in v$session which session is
locking this package.
SELECT SID, SERIAL#, OSUSER, USERNAME FROM V$SESSION WHERE sid = '<SID>
3. If the session still is shown, use:
ALTER SYSTEM KILL SESSION '<sid>, <serial#>';
check the above work out.

Trying to Customize a view object relating to an LOV

I am trying to customize an LOV that references View Object FlexDynamicLovVo. The about page shows
/oracle/apps/fnd/framework/webui/OAFlexLOVRG 120.6. The controller is OAFlexDynamicLovCO and the application module is OAFlexDynamicLovAM. I was able to located all the files and directories with the exception of the View Object FlexDynamicLovVo. I have no idea where to find this.
Thanks
Nick

Hi,
In AM.xml file we can find VO path. Provided VO is attached this AM.
In your case check in OAFlexDynamicLovAM.xml you can find FlexDynamicLovVo path.
-Anand

Trying to customize a multiple item lookup field using JSLink

I'm trying to Customize a multiple item lookup field using JSLink, in SP 2013. This illustrates what I want to do:
I can replace the ";" with in the Text column, but not the Lookup column. Here is the JSLink code I'm using for the Text column.
(function () {
var overrideCtx = {};
overrideCtx.Templates = {};
overrideCtx.Templates.Fields = {
'Text': { 'View' : '<#=ctx.CurrentItem.Text.toString().replace(";"," ")#>' }
SPClientTemplates.TemplateManager.RegisterTemplateOverrides(overrideCtx);
How can I display each item on separate lines in the Lookup column?

You can retrieve the values of the lookup column and reformat their display by replacing the following:
overrideCtx.Templates.Fields = {
'Text': { 'View' : '<#=ctx.CurrentItem.Text.toString().replace(";"," ")#>' }
with something like this:
overrideCtx.Templates.Fields = {
'Lookup': { 'View' : function(ctx) {
var arr=[];
var fld=ctx.CurrentItem[ctx.CurrentFieldSchema.Name];
for (i=0; i<fld.length; i++) {
arr.push(fld[i].lookupValue);
return arr.join(" ");
Here we are looping through each lookup value contained in the multi value lookup field and adding it to an array. Once complete, we use join to flatten the array and separate each entry with the . Note...this will show each value on a new line,
but it will be the string value without the hyperlink. If you want the actual hyperlink to the item, you can rebuild the hyperlink and add that to the array instead. You can get the item's display form from ctx.CurrentFieldSchema.DispFormUrl and the
item's id from fld[i].lookupId for rebuilding the hyperlink.

HT203196 My macbook air 13inch got shutdown 3 times by itself. I tried installing SMC package as suggested but my computer is telling the update is not required. Could you please help me on fixing this issue. Thanks.

My macbook air 13inch got shutdown 3 times by itself. I tried installing SMC package as suggested but my computer is telling the update is not required. Could you please help me on fixing this issue. Thanks.

What version of OS X are you using? Exactly which MBA model do you have?

Vi Freezes upon Trying to Edit or Select

I am trying to edit a VI. Upon trying to delete or select a command with I/O Assistant 1 (the first write command) the computer freezes. Everytime I try to delete this command or commands below it the computer freezes. It seems to be a software bug. I have tried deleting the I/O Assistant and starting from scratch but I don't have enough skill yet in VI writing to do this. Any help would be appreciated.
Nevica
Message Edited by nevica on 07-30-2009 05:53 AM
Message Edited by nevica on 07-30-2009 05:53 AM
Solved!
Go to Solution.
Attachments:
Baratron2.7.1.vi ‏482 KB

check this
Attachments:
Untitled 2.vi ‏214 KB

How do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?

how do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?

How long did you press and hold both the Select (Center) and Menu buttons together? Have you tried doing this procedure more than once? Is the hold switch in the Off position?
If nothing else, let the iPod's battery fully drain. Then charge it back up again.
B-rock

Error while trying to customize Web Authentication

Hi,
i have tried to customize the web auth portal on a WLC running v5.2.110.0.
i have compressed the login files (images and html code) into .tar file with picozip and tried to download it to the controller.
i'm getting the following error:
*Feb 04 17:47:07.236: %UPDATE-3-FILE_OPEN_FAIL: updcode.c:2408 Failed to open file login.html.
*Feb 04 17:47:07.236: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:469 Failed to open the file : /mnt/application/webauth_ramdisk/login.html.
-Traceback: 104b7590 10012724 1001015c 100148c8 104be944 10e42470 11033dec
Did anyone managed to customize the web auth portal?

Check if the path mentioned using the path statement is correct. If your image is in the root directory of the tftp server your path statement on the controller would be /. If the image is in the wireless directory of your tftp server then the path would be /wireless.

RE: An error occurred while trying to add the selected printer. Error -9672

I am trying to add my HP 8450xi to my Printer List via Print Utility and get the following message: "An error occurred while trying to add the selected printer. Error -9672." I have tried everything, and this printer is only 2 years old. I was able to load an HP 69080 which is about 2 months old, and my Lanier LD232C drivers. Any ideas?

My HP 8450Xi is connected to my LAN [ethernet]. While I do have an Airport Card in my Mac Pro, and two airport base stations active for laptops, it is disabled. What is strange, I was able to load the drivers for a newer HP Network Deskjet 6980xi (Driver version 4.0.2), although it took a couple of times before it would successfully load, but could not figure out why it worked and the 8450xi (Driver 2.5.5) did not. Also, the 4.0.2 driver would not work with the 8450.

Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. Any suggestion?

Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. I already tried to rebuild the iPhoto Library (all the possible options) and tried to update teh version from 9.4.3 to 9.5 but the problem still persists: is there a way to delete this slideshow without selecting it ? How can I solve the problem, please?
Kind Regards

Can you restore your iPhoto Library from a backup version, that was created before you added the slideshow?
If not, have you tried to rebuild the slideshow with iPhoto Library Manager?
As described by Terence Devlin here: Re: iphoto library was created with an unrelased version of iphoto please quit and ugrade library by opening it in iphoto 2 or iphoto 4

The customize toolbar selection is grayed

in my toolbar on the top of the screen the airport icon that showed the service and when u clicked on it showed the local wifi signals dissapeared. When i went to go to customize toolbar the selection is grayed. does anyone know how to get that icon back and what happened to my customize toolbar selection. thanks alot i'm kind of knew to the mac world

John,
The "Customize Toolbar..." option only applies to your Finder window(s). You are confusing the "Toolbar" (in Finder windows) with the "Menu Bar" (at the top of your Desktop. That's why you are seeing the "Customize" option as greyed out.
We can add a "menulet" (that's what these are called) to the Menu Bar in one of two ways... Most can be added by selecting that option in the pane for that service in System Preferences. Open System Preferences>Network, choose "Airport" from the "Show:" pull-down menu, and check the option to show Airport in the Menu Bar.
The second method we can use to get a menulet into our Menu Bar is to double-click the script that places it there. Look in /System/Library/CoreServices/Menu Extras/. In this folder, you will see a number of files with a ".menu" extension. By double-clicking any of these files, you can place the menulet associated with that service in your Menu Bar.
Scott

Issue withe Info Package Selection for the CRM Datasource

Hello,
I have a custom CRM data-source which has the Selection option as CRM-GUID as the Selection option in the RSA3.
I have replicated the Same Data-source in BI system and Created the Info Package ,but i could not see that GUID Selection in the Info Package.
To Be Noted:
I went to RSA6 enabled the selection option( check Box ) , there is no hide option in the datasource , only the Selection option check box is enabled in the RSA6 .
Replicated again , and activated again , logged out and logged in again . But the Info Package does not show the CRM - GUID selection option.
I found something not sure this might be the issue:
1) The Data type is RAW with length 16.
2) The Datasource in the BI side has SS conversion Routine Blank for this field and the Selection has X.
But no Selection option in the Info Package.
Any suggestion and inputs are welcome.
Thanks in advance.
Adhvi.

similar issue is disussed in the below thread...
Info package Selection were hidden
Info Package Selection Language key is not diplaying while this is checked
search for any SAP Note which explains about data type RAW ....

Netinstall - Trying to Customize Package Selection

Similar Messages

Maybe you are looking for