Netlogon and SYSVOL shares are not created after DCPROMO in Windows 2012
Hi
When i run a dcpromo on my windows 2012 server (all dc's are windows 2012)
On the new domain controller i don't have sysvol or netlogon share.
All the sugestions i found in social refer to FRS but in server 2012 DFS is used, no idea how to troubel shoot this problem.
All dcdiag on all DC before promo where clean
dcidag on srv01 the new dc shows:
Doing initial required tests
Testing server: Bas\SRV01
Starting test: Connectivity
......................... SRV01 passed test Connectivity
Doing primary tests
Testing server: Bas\SRV01
Starting test: Advertising
Warning: DsGetDcName returned information for
\\SRV09.dikkenberg.local, when we were trying to reach SRV01.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... SRV01 failed test Advertising
Starting test: FrsEvent
......................... SRV01 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SRV01 passed test DFSREvent
Starting test: SysVolCheck
......................... SRV01 passed test SysVolCheck
Starting test: KccEvent
......................... SRV01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SRV01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SRV01 passed test MachineAccount
Starting test: NCSecDesc
......................... SRV01 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\SRV01\netlogon)
[SRV01] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... SRV01 failed test NetLogons
Starting test: ObjectsReplicated
......................... SRV01 passed test ObjectsReplicated
Starting test: Replications
......................... SRV01 passed test Replications
Starting test: RidManager
......................... SRV01 passed test RidManager
Starting test: Services
......................... SRV01 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 21:55:22
Event String:
The WinRM service is not listening for WS-Management requests.
An error event occurred. EventID: 0x00001001
Time Generated: 02/26/2013 21:58:10
Event String:
The machine SRV01 attempted to join the domain dikkenberg.local but
failed. The error code was 1332.
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 22:00:04
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 22:08:43
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x0000008E
Time Generated: 02/26/2013 22:10:22
Event String:
The time service has stopped advertising as a time source because th
e local clock is not synchronized.
A warning event occurred. EventID: 0x00001796
Time Generated: 02/26/2013 22:24:05
Event String:
Microsoft Windows Server has detected that NTLM authentication is pr
esently being used between clients and this server. This event occurs once per b
oot of the server on the first time a client uses NTLM with this server.
......................... SRV01 failed test SystemLog
Starting test: VerifyReferences
......................... SRV01 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dikkenberg
Starting test: CheckSDRefDom
......................... dikkenberg passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... dikkenberg passed test CrossRefValidation
Running enterprise tests on : dikkenberg.local
Starting test: LocatorCheck
......................... dikkenberg.local passed test LocatorCheck
Starting test: Intersite
......................... dikkenberg.local passed test Intersite
C:\Users\administrator.DIKKENBERG>
Dcdiag on good dc:
Performing initial setup:
Trying to find home server...
Home Server = SRV09
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Bas\SRV09
Starting test: Connectivity
......................... SRV09 passed test Connectivity
Doing primary tests
Testing server: Bas\SRV09
Starting test: Advertising
......................... SRV09 passed test Advertising
Starting test: FrsEvent
......................... SRV09 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SRV09 passed test DFSREvent
Starting test: SysVolCheck
......................... SRV09 passed test SysVolCheck
Starting test: KccEvent
A warning event occurred. EventID: 0x80000B46
Time Generated: 02/26/2013 22:42:36
Event String:
The security of this directory server can be significantly enhanced
by configuring the server to reject SASL (Negotiate, Kerberos, NTLM, or Digest)
LDAP binds that do not request signing (integrity verification) and LDAP simple
binds that are performed on a cleartext (non-SSL/TLS-encrypted) connection. E
ven if no clients are using such binds, configuring the server to reject them wi
ll improve the security of this server.
......................... SRV09 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SRV09 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SRV09 passed test MachineAccount
Starting test: NCSecDesc
......................... SRV09 passed test NCSecDesc
Starting test: NetLogons
......................... SRV09 passed test NetLogons
Starting test: ObjectsReplicated
......................... SRV09 passed test ObjectsReplicated
Starting test: Replications
......................... SRV09 passed test Replications
Starting test: RidManager
......................... SRV09 passed test RidManager
Starting test: Services
......................... SRV09 passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
eries is unknown. Contact the administrator to install the driver before you log
in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
ter 400 Turbo is unknown. Contact the administrator to install the driver before
you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Verz
enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
ver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:14
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft
XPS Document Writer is unknown. Contact the administrator to install the driver
before you log in again.
A warning event occurred. EventID: 0x000016AF
Time Generated: 02/26/2013 22:34:50
Event String:
During the past 4.24 hours there have been 20 connections to this Do
main Controller from client machines whose IP addresses don't map to any of the
existing sites in the enterprise. Those clients, therefore, have undefined sites
and may connect to any Domain Controller including those that are in far distan
t locations from the clients. A client's site is determined by the mapping of it
s subnet to one of the existing sites. To move the above clients to one of the s
ites, please consider creating subnet object(s) covering the above IP addresses
with mapping to one of the existing sites. The names and IP addresses of the cl
ients in question have been logged on this computer in the following log file '%
SystemRoot%\debug\netlogon.log' and, potentially, in the log file '%SystemRoot%\
debug\netlogon.bak' created if the former log becomes full. The log(s) may conta
in additional unrelated debugging information. To filter out the needed informat
ion, please search for lines which contain text 'NO_CLIENT_SITE:'. The first wor
d after this string is the client name and the second word is the client IP addr
ess. The maximum size of the log(s) is controlled by the following registry DWOR
D value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameter
s\LogFileMaxSize'; the default is 20000000 bytes. The current maximum size is 2
0000000 bytes. To set a different maximum size, create the above registry value
and set the desired maximum size in bytes.
A warning event occurred. EventID: 0x0000000B
Time Generated: 02/26/2013 22:42:06
Event String:
Custom dynamic link libraries are being loaded for every application
. The system administrator should review the list of libraries to ensure they ar
e related to trusted applications. Please visit http://support.microsoft.com/kb/
197571 for more information.
A warning event occurred. EventID: 0x000727AA
Time Generated: 02/26/2013 22:43:09
Event String:
The WinRM service failed to create the following SPNs: WSMAN/SRV09.d
ikkenberg.local; WSMAN/SRV09.
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/26/2013 22:43:11
Event String:
Name resolution for the name _msdcs.dikkenberg.local timed out after
none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/26/2013 22:43:11
Event String:
Name resolution for the name dikkenberg.local timed out after none o
f the configured DNS servers responded.
A warning event occurred. EventID: 0x0000000C
Time Generated: 02/26/2013 22:43:13
Event String:
Time Provider NtpClient: This machine is configured to use the domai
n hierarchy to determine its time source, but it is the AD PDC emulator for the
domain at the root of the forest, so there is no machine above it in the domain
hierarchy to use as a time source. It is recommended that you either configure a
reliable time service in the root domain, or manually configure the AD PDC to s
ynchronize with an external time source. Otherwise, this machine will function a
s the authoritative time source in the domain hierarchy. If an external time sou
rce is not configured or used for this computer, you may choose to disable the N
tpClient.
A warning event occurred. EventID: 0x00001796
Time Generated: 02/26/2013 22:43:50
Event String:
Microsoft Windows Server has detected that NTLM authentication is pr
esently being used between clients and this server. This event occurs once per b
oot of the server on the first time a client uses NTLM with this server.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:12
Event String:
Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
eries is unknown. Contact the administrator to install the driver before you log
in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:16
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Verz
enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
ver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:16
Event String:
Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
ter 400 Turbo is unknown. Contact the administrator to install the driver before
you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:17
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft
XPS Document Writer is unknown. Contact the administrator to install the driver
before you log in again.
......................... SRV09 failed test SystemLog
Starting test: VerifyReferences
......................... SRV09 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dikkenberg
Starting test: CheckSDRefDom
......................... dikkenberg passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... dikkenberg passed test CrossRefValidation
Running enterprise tests on : dikkenberg.local
Starting test: LocatorCheck
......................... dikkenberg.local passed test LocatorCheck
Starting test: Intersite
......................... dikkenberg.local passed test Intersite
With kind regards, Bas van den Dikkenberg
Doing primary tests
Testing server: Bas\SRV01
Starting test: Advertising
Warning: DsGetDcName returned information for
\\SRV09.dikkenberg.local, when we were trying to reach SRV01.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... SRV01 failed test Advertising
"SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE"
this error means that the DC is in USN rollback state.
srv01 is not usn rollback see:
test from other DC:
Doing primary tests
Testing server: Ouders\SRV10
Starting test: Advertising
......................... SRV10 passed test Advertising
Starting test: FrsEvent
......................... SRV10 passed test FrsEvent
Test from srv09:
Doing primary tests
Testing server: Bas\SRV09
Starting test: Advertising
......................... SRV09 passed test Advertising
Starting test: FrsEvent
......................... SRV09 passed test FrsEvent
With kind regards, Bas van den Dikkenberg
Similar Messages
-
MP Related Logs and IIS Virtual directory not created After re_installation of SCCM 2007
Hi
We have re-installed the IIS and SCCM secondary site. tried to intsall the MP role and DP role but it has not created any logs or IIS virtual directory in the secondary site server which is in WAN link.
Trouble shooting:
- checked the ports 443,445 and 80
- Disabled symantec
- exchanged the public key ( still it is in progress in Despooler log)
- checked the site to site permission and added the accounts.
please suggest further.Yes, I know this is an old post, but I’m trying to clean them up.
What error(s) are you getting within the logs? Without these details there isn’t much anyone can do to help you.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Touch Pad and Web Cam are not working after installing drivers also
Hiii
Synaptic Touch pad drivers are not working like not detecting the hardware so please help me on this
and
Webcam is not working like its not detecting even after installing cyberlink software given in the hp web site
please help me regarding this problems1.Download hp support assistant.
2.Run it and go to the tab updates and tune-ups.
3.Click in the button check for updates. It will find you the updates.
4.Click in the button Download and Install.
5.When it finish restart your computer.
[link:http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl...
Also if it doesnt' work , you can also try :
1.Right click to the computer.
2.Click to the manage option.
3.Then select the device manager.
4.After that go to imagine devices and select your camera, then right click on it and select the option update the driver software do the same in the touchpad.
If and this doesn' t work unistall the drivers and install them again. -
I am using Reporting Service Integration mode with SharePoint. SSRS is installed on separated machine of SharePoint stacks in Integration Mode. Everything was working properly and I could create/edit/modify RDL reports(parameters, Datasource, Subscription)
inside SharePoint and Document Libraries.
But after installing SQL Server 2012 Service Pack 2, on opening RDL reports inside SharePoint I receive this error message.
The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation
I should mention that SSRS is installed in the SharePoint integration Mode and there is no SSRS management console.Hi Hedayat-Abedijoo,
According to your description, you are using Reporting Services in SharePoint Integrated mode, and everything worked fine before you install SQL Server 2012 Service Pack 2. After the package is installed, when you open RDL reports, the error occurred: The
permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation.
According to my search, there may be two reasons for the problem:
This is caused when the application pool account that runs the SharePoint Web application you are on in IIS and the application pool account that SharePoint believes is running the site differ. This happens if the application pool account is changed directly
in IIS instead of through SharePoint (using the approved method).
This error can be caused when Kerberos authentication has been set up correctly and delegation in a double hop scenario will succeed, but Reporting Services integration has been set up for Trusted Account rather than Windows Authentication. This causes
SharePoint to continue to impersonate the logged-on user when contacting Reporting Services; when Reporting Services compares the application pool account to the user account making the request, they are not equal.
In this case, we can solve the problem by changing the application pool account in IIS back to the previous account and set AuthenticationTypes to RSWindowsNTLM only. For detail information, please refer to 8.3 “The permissions granted to user 'Domain\User'
are insufficient for performing this operation” in the document:http://msdn.microsoft.com/en-us/library/ee384252(SQL.100).aspx
If you have any questions, please feel free to let me know.
Thanks,
Wendy Fu -
Payment term and Baseline date are not appear after residual clearing
Hi Friends,
We have an issue in Payment term. Recently small changes were made in OBA3.Here they enable the option of "Payment term from invoice". the function of this is to - copy the payment term and baseline date form invoice to Partial item .Due to enable of this function after residual clearing the payment term and base line fields are get empty.
Now user want to get these fields to be updated even not changes take place in OBA3.Can you please suggest me the way, with out changes in OBA3 can we get payment term and baseline date field after residual clearing .Please suggest .
Thank you
Regards,
DharmaHi Julie,
Thanks for your reply..
Here the issue is, the user using Baseline date for two specific purpose.
1.Due day calculation-auditing purpose
2.Agning report
For due day calculation they recently enable the option "payment term from invoice in -OBA3".Due to active the function,system copy the payment term and baseline date from invoice to residual item.it means the residual item having baseline data as invoice date not posting date.
But for aging report purpose it has to be update posting date.
now user want to meet these both requirement .How can it possible .Please suggest.
Thank you
Regards
Dharma -
AFP Shares are not accessable after updating to 10.8.2
Hi,
I have just upgraded a server to run 10.8.2 as well as the latest version of the Server App. I can now not connect to the server from the various mac clients in the office using AFP. I can however connect from the Windows 7 clients that are using SMB. So far I've tried rebooting, shutting down and starting file sharing, re-setup a share to no avail. Any thoughts?
Cheers,
RyanLog out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane. Then log back in and re-enable, respectively. That should jump start Photo Stream.
OT -
Listener and environment files are not created in New RDBMS ORACLE_HOME
Hi,
I am upgrading the EBS 12.1.3 database from 11.1.0.7 to 11.2.0.2.
I have completed the steps till Implement and run AutoConfig on Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]
I have completed AutoConfig on the Database tier successfully. But i doesn't find any listener files on <RDBMS_ORACLE_HOME> and similarly environment file.
These files are already available on OLD <ORACLE_HOME>.
Please suggest me if i miss any step.
Thanks
Nawneetthanks for the prompt reply ...
while running the command
<RDBMS_ORACLE_HOME>\appsutil\bin\adconfig.cmd contextfile=<context_file> we got below error.
AC-00435: Unable to create directory :F:\app\mocppd\product\11.2.0\dbhome_1\
admin\prod_srv-moc\bdump
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: F:\app\mocppd\product\11.2.0\dbhome_1\appsutil\install\prod_srv-moc
adsvdlsn.cmd INSTE8_SETUP 1060
AutoConfig is exiting with status 1
AutoConfig execution completed on Mon Feb 7 05:32:05 2011
Time taken for AutoConfig execution to complete : 0 mins 29 secsHow to correct the above one and should we proceed with the Step 24 "Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]"
Thanks
Nawneet -
My wifi and bluetooth funtions are not working after downloading iOS7
After downloading the iOS7 yesterday I tried using my Bluetooth but it wouldn't turn on... Now I just noticed that my WiFi will not move to on either... Anyone else having this problem? or does anyone know how to fix it???
I never had any issues until ios7. It happened as soon as I updated, so it has to be a software issues. From what i can see, people who have this issue are all 4s users. This shouldnt mean a hardware issue, but that the 4s is incompatible with ios7!
Regarding recent ios6 upgrade.. I hadnt upgraded so I wouldnt know what that would have done to my phone, but it cant be acceptable. I cant do everything on cellular network. It costs too much.Smartphones should have wifi, especially for travelling!
Are you really accepting that as an excuse... hardware issue.. get a new phone?!
Fair enough... after 4 iphones Ive been quite curious what the fuss over Samsung is all about.... -
Hp hdx18 touch buttons are not working after upgrading to windows 7
hey,
i upgraded to windows 7 but touch the buttons have stoped working (like the treble&bass), so wt should i do!For Treble&Bass functionality on HDX16 and HDX18 install the Tone Control driver SP45617.exe
For Touch buttons install QuickLaunch driver SP45058.exe
Before installing Tone Control you need to have the IDT audio driver for HDX16/HDX18 installed - SP45011.exe
Message Edited by ArtAppreciator on 10-23-2009 11:57 PM
Although I am an HP employee, I am speaking for myself and not for HP -
Purchase requisitions are not created for Component by MRP
Hi,
I have created planned orders for assy. When I run the MRP the purchase requisitions are not created by MRP for the components. If I check the planned order the components tab is showing all the raw materials list as per the BOM. The master data tab shows the BOM,Routing,Production version etc. But when I run the MRP the components planned orders/purchase requisitions are not created. There is no stocks available for the components in the plant, still the purchase requisition are not created by MRP.
I have tried in both transactions MD01 and MD02.
I could notice one thing. Supoose if I enter 31.12.2009 is the order finish date, the system creates exception mesage 10- Rescheduling in with proposed date 01.12.2009. Why the system is propsoing rescheduling in with date 01.12.2009 which past date.
Please sugest.
thanks and regards
MurugesanHi,
I am using MRP type PD for assy and components. There is no planned orders for assy.
If I run MD02 the planned orders created for assy and purchase requisition are created for raw materials. But if I run MRP in MD01 neither the planned orders nor the purchase requisitions created.
I tried the Control keys NETCH,NEUPL but still the planned order and purchase requisitions are not created if I run using MD01.
Please suggest.
thanks and regards
Murugesan -
"My folders" and "Shared Folders" are not appearing
Hi All,
"My folders" and "Shared Folders" are not appearing after integrating with BI server(11.1.1.1.5). Any help?
Regards,
Kishore PTgara wrote:
There are plenty of apps in the App Store that can do what you want, and many are free.
There are not currently (or at least I haven't found any) any weather apps that will appear in the Notifications Center the way the included app does on the iPhone. It's not a big deal for me but I can understand the people who want it. -
On oracleXE 10g installation, bdump, cdump, udump are not created
Hi all,
I installed Oracle XE 10g on my system successfully, but in
C:\oraclexe\app\oracle\admin
folder, bdump, cdump, and udump files are not created. Any help, what may be the reason will be appreciated.
Thanks in advance,
PalThe SQL used to to create and configure a database excludes the ability to create the directories required. (unless using ASM)
This means that before running the dbcreate shell script (or equivalent), the directories need to be created via the o/s itself - usually a command line script.
The Oracle XE version for Linux combines this (the command line stuff and SQL stuff) into a single script in $ORACLE_HOME/bin/createdb.sh - I would expect that you will find a .cmd version of this for XE on Windows.
In this script, the mkdir command is used to create the required directories before the sqlplus is launched to create the database.
However, this script does not create separate bdump/adump/cdump/etc directories.
It creates the following 2 directories:
mkdir $logdir
mkdir $filedir
These are defined as:
filedir=$ORACLE_HOME/dbs
logdir=$ORACLE_HOME/log
Then it configures the init.ora for the db create as follows:
user_dump_dest=$logdir
background_dump_dest=$logdir
core_dump_dest=$logdir
audit_file_dest=$logdir
BTW, I suggest that you consider posting database questions in the [url http://forums.oracle.com/forums/forum.jspa?forumID=61]Database - General forum - this forum is specifically about the database SQL and PL/SQL languages. Not about db installation, configuration and so on. -
Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014
this cause to "cant create ActiveX object" error in VB Scripts
win7 x64, ps cc 2014 x64
any ideas? thnksAll I can so is show you what I see in that area of my Windows 7 registry but I have CS2, CS6 32, CS6 64, CC 32, CC 64 and CC 2014 64 installed. 6 versions yet there seem to be 9 Photoshop Application dot keys.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Photoshop.Application]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application\CurVer]
@="Photoshop.Application.80"
[HKEY_CLASSES_ROOT\Photoshop.Application.60]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60\CLSID]
@="{99aea70e-4d13-44bf-a878-33345cbfcbc8}"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1]
@="Photoshop CS6 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70\CLSID]
@="{951ec38c-3de6-4bb8-8246-adf182e6421d}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1]
@="Photoshop CC Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1]
@="Photoshop CC 2014 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9\CLSID]
@="{16aa0b9e-79ac-43b5-86ca-ab961fbeed5f}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}" -
I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?
Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option
-
why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.
Maybe you are looking for
-
Will all ny music be lost if I sync Ipod to new computer?
-
Adobe Camera Profiles in Lightroom 2.4
Hello, I upgraded to Lightroom 2.4, and installed Camera Raw 5.4. The Sony A330 is on the support list now. However, I cannot see the profiles under camera calibration in the develop tab. What gives with this? I shut down and reopened, but no good.
-
Help! I can only print small thumbnail sized prints - won't size correctly
Recently I tried to select a photo and print it to my HP officejet 6310. I am trying to use photo quality paper sized 8 1/2 x11 and print either one or two photos per page, either 4x6 or whatever will fit. I have tried many different ways to select t
-
I can't delete an email account from my iPHONE4s
After the last OS upgrade last month I lost access to my gmail accounts and I can not delete them. When I go to settings/ mail/ click on account it takes me to the main screen!
-
Is there any plan to fix the Javascript function on CS6 from SPRY to JQuery?