NetMail,Netlet,NetFile stop after enabling certificate based authentication

I use SunONE Portal6.1+SRA. I have installed the gateway and portal on the same machine and have installed the sample portal also. Everithing works fine (Netlet,NetMail,NetFile) untill I enabled the gateway to use certificate based client authentication. After this step the applications (NetFile,Netlet,NetMail) stopped working. It seems that they can't connect to the gateway after the initial applet download because of the client certificate based authentication.
Is there some workaround or configuration change that I can do in order to allow the applets to communicate with the gateway?

At last I have found my mistake. I was using the JPI 1.4.1. If I use JPI 1.3.1 there is no problem because this version of java usesthe browser libraries in order to make the ssl connection and then the certificate that is imported in to the browser is used. Finally I have found the way to tell the JPI 1.4 which certificate to use and how.
Look here if you want more information:
http://java.sun.com/j2se/1.4.1/docs/guide/security/jsse/JSSERefGuide.html#Customization
http://java.sun.com/j2se/1.4.1/docs/tooldocs/tools.html#security
see also:
http://forum.java.sun.com/thread.jsp?forum=2&thread=361995

Similar Messages

Exchange 2010 SP3 OWA with certificate based authentication

Hi,
I have a bizarre problem in my customer’s environment. Maybe someone has an idea.
Exchange 2010 with SP3, latest cumulative Update installed.
The problem I’m having is that when I enable Certificate based authentication (require client certificate option in IIS) on OWA and ECP virtual directories in conjunction with forms based authentication (this is the requirement – the user
must have a client certificate and type in username and password to log in to OWA), the result is that after the user selects the certificate he wants to use, he is logged into OWA automatically, but cannot use the website, because it’s being constantly automatically
refreshed (or redirected to itself or something like that). The behavior occurs with all users, with any browser. If client certificate is on required, forms based authentication works just fine. If I switch to “Basic Authentication” and enable client certificate
requirement, then OWA act’s as it should be – so no problems. The problem only occurs when authentication type is forms based and client certificates are required.
I have tried the exact same settings (as far as I can tell) on one other production server and one test server, and encountered no such problems.
Anyone – any ideas?

Hi McWax,
According to your description and test, I understand that all accounts cannot login OWA when select require client certificate.
Is there any error message when open OWA or login? For example, return error ”HTTP error: 403 - Forbidden”. Please post relative error for further troubleshooting.
I want to confirm which authentication methods are used for OWA, Integrated Windows authentication or Digest authentication? More details about it, for your reference:
http://technet.microsoft.com/en-us/library/bb430796(v=exchg.141).aspx
If you select another authentication method, please check whether Client Certificate Mapping Authentication services is installed, and also enabled in IIS, please refer to:
http://www.iis.net/configreference/system.webserver/security/authentication/clientcertificatemappingauthentication
To prevent firewall factor, please try to sign in OWA at CAS server. Besides, I find a FAQ about certificate:
http://technet.microsoft.com/en-us/library/aa998424(v=exchg.80).aspx
Best Regards,
Allen Wang

Certificate Based Authentication - Questions and Authentication Modules

Hi Everyone
I'm trying to achieve a specific configuration using AM . I've installed the AM Server 7.1 on a AS9.1EE container and have another AS91EE container on another machine that has the agent configured.
The AM server is using a DS rep for configurations and dynamic profiles and using a AD rep for authentication.
What I now need to achieve is authentication base on one of these two way :
- user and password authentication (which is working)
- Certificate based authentication ( working on it )
To configure the Cert. Auth I've started reconfiguring the containers and agent to work in SSL, as said in the manuals. The manuals also say that the containers must have "Client Authentication Enabled", they don't say which ( either the server or agent container or both ) . Also I assume that "Client Authentication Enabled" is refering to the Http Listener configuration of that container.
When I enable it ( the Client Authentication ) on the http listener for either containers the https connection to that container stops working. In Firefox it simply prompts an error saying that the connection was "interrupted while the page was loading." . On IE, it prompts for a Certificate to be sent to the container and when I provide none, then it gives me the same error as Firefox. In both cases no page was presented.
Basically what I need is for both authentication methods described before to work! So, asking the certificate ( specially if it wasn't the AM asking for it ) without giving the user a chance to use a user/password combination isn't what is wanted.
From what I gathered the "Client Authentication" makes this http listener need a certificate to be presented always .
So, my first question is : is the documentation correct? Does this "Client Authentication" thingy need to be enabled at the listener level?
2- I'll probably need to code a costum module for this scenario I'm working in because of client requisits, but if possible I would like to use the provided module. Still, in case I need to make on, has anyone made a cert. auth module that they can provide me with so I have a working base to start with?
3- Is there a tested how-to anywhere on how to configure Cert. Based Authentication?
All for now,
Thank you all for your help
Rp

Hi Rp,
We are using AM 7.1 with Certificate Authentication and LDAP Authentication. To answer your question, yes it is possible to use both method at the same time i.e. Use certificate first and then fallback to LDAP.
First you need to configure AM's webcontainer to accept the certificate. From your message it is clear that you have done that. The only mistake that you did is "made the Client Authentication required". I have done this in Sun WebServer 7.0 and Sun Application Server 7.0 (yeah that is old!!). You need to make the Client Authentication as optional. It means that Certificate will be transferred only when it is available otherwise Web Container will not ask for the Certificate. You will have to search Glassfish website or ASEE 9.1 manual to learn how to make the Client-Authentication Optional. You definitely need this authentication optional as Web Agent will be connecting to this AM and as far as I know they do not have any mechanism to do the Client Authentication.
Secondly, In AM 7.1, you will have to Set up the Authentication chaining. Where you can make Certificate Module as Sufficient and LDAP module as REQUIRED.
Thirdly, if you are using an non ocsp based certificate then change the ocsp checking in AMConfig.properties to false.
Fourth, You may have to write a small custom code to get the profile from your external sources. (if you need to then I can tell you how).
HTH,
Vivek

Certificate Based Authentication and SSL

To whom it may concern,
I have installed SJES on Solaris 9 x386 (intel version). Everything is running fine, the mails are also coming and going.
Now, I need Certificate based authentication and SSL. I have downloaded versign.com trial certificate and have install it succesfully in the Messaging Server Console -- > Manage Certificates. The certificate is also visible in its tab.
Next, I followed the documentation and enable ssl by using ./configutil utility. And also restarted the server.
I am running my Messenger express (http) like this :
http://testing.xyz.com:8100
(I am using port 8100 for http access to mails). After restarting the mail server, I tried :
https://testing.xyz.com:8100 also,
http://testing.xyz.com:443 also,
https://testing.xyz.com:443 also,
but I cannot see the login page of the mail server. All the above mention url i tried and just given error "the connection was refused when attempting to contact testing.xyz.com. I CAN ONLY SEE THE LOGIN PAGE WHEN I WRITE THE OLD HTTP ADDRESS: i.e. http://testing.xyz.com:8100
And I also checked the logs and the server is having no problem in starting and there is not a single word regarding SSL enabling in the logs.
Please help me out, it's really a strange behaviour. I am using SunONE Messaging Server 6.0.
Thanking you,
Farhan Ahmed,
System Engineer
Dubai, UAE.

Dear jay,
I am pasting a line from imap and http logs ... i don't know what this error means and how to resolve it.
[29/Dec/2004:14:42:45 +0100] testing imapd[888]: General Error: SSL initialization error: ASockSSL_Init: couldn't find cert Server-Cert (-8183)
strange thing is that my certificate name is lowercase server-cert and also i can see in the GUI console the certificate name as lowercase and I have also set this parameter encryption.rsa.nssslpersonalityssl = server-cert (all lowercase), but the error in the log tells it as "Server-Cert" !!!! though it is "server-cert"
i got this line from the http log:
[29/Dec/2004:14:42:47 +0100] testing httpd[894]: General Error: SSL initialization error: ASockSSL_Init: couldn't find cert Server-Cert (-8183)
I haven't missed the sslpassword.conf file step. I have placed the same password which i provided while generating the certificate request in the GUI.
Help me out what this errors means and how to resolve them. I have also copied the cert7.db and key3.db to /opt/SUNWms*/config directory from the /var/opt/mps/serverroot/alias
Thanking you,
Farhan Ahmed,
System Engineer,
Dubai Internet City, Dubai, UAE.

Certificate based authentication

I have a client application that requires certificate based authentication.
I could not find any instructions on how to set this up in the 11g manuals. So I reverted to the 5.2 manual (http://docs.oracle.com/cd/E19850-01/816-6698-10/ssl.html#18500), and followed some instructions found online.
I have completed the setup, and the client is able to authenticate using his certificate, and I have verified this in the logs.
[22/Mar/2012:13:13:33 -0500] conn=34347 op=-1 msgId=-1 - SSL 128-bit RC4; client CN=userid,OU=company,L=city,ST=state,C=US; issuer CN=issuing,DC=corp,DC=company,DC=lan
[22/Mar/2012:13:13:33 -0500] conn=34347 op=-1 msgId=-1 - SSL client bound as uid=userid,ou=employees,o=company
[22/Mar/2012:13:13:33 -0500] conn=34347 op=0 msgId=1 - BIND dn="" method=sasl version=3 mech=EXTERNAL
When adding the usercertificate attribute to the ID I used the following LDIF:
version: 1
dn: uid=userid,ou=employees,o=company
changetype: modify
replace: userCertificate
usercertificate: < file:///home/user/Certs/usercert.bin
the file was a binary encoded certificate file.
Here is the part that I don't understand when I do a search (or LDIF export) of the user object with the certificate it just returns a short base64 encoded string. when I decode this string, it is just the literal string of "< file:///home/user/Certs/usercert.bin".
So it appears that the certificate has not been stored on the user object in binary, and yet the certificate authentication still works. The file mentioned, does not exist on the LDAP server (the cert was loaded from another server), so there is no way that it is reading the cert from the file.
Anyone have any idea what is going on here? And why certificate auth works, when there appears to be not cert stored in LDAP?
If by chance this is how it is all suppose to work, then how do I go about backing up the usercertificate attribute when I do my LDAP data backups?
Thanks
Brian

Cyril,
Thanks for the reply.
I believe I am doing both types of certificate authentication, you are describing. My issue is that when I perform the steps to store the PEM formatted cert into the directory server, rather than storing a binary value of the cert, it appears to be storing the path to the file I attempted to import. The odd part is that I can still authenticate even after this is done.
I tried to post as much info as I could before without posting any sensitive data, I'll try and expand on that below.
Here is my documentation of the steps taken to configure the server and setup a user, for what I believe to be certificate based authentication, where the user is authenticated solely on the certificate that they provide (no password is sent).
1. Server must be running SSL, all connections for Certificate Auth are done over SSL (just a note)
2. From the DSCC
----a. Directory Servers Tab -> Servers Tab -> Click Server Name
----b. Security Tab -> General Tab
----c. In "Client Authentication" section, select:
--------i. LDAP Settings: "Allow Certificate-Based Client Authentication"
--------ii. This should be the default setting.
3. On the directory server setup the /ldap/dsInst/alias/certmap.conf file:
----a. certmap default default
----default:DNComps
----default:FilterComps uid,cn
4. restart the directory server
5. Do the following to setup the user who will be connecting. On their unix account (or similar)
----a. Create a directory to hold the certDB
--------i. mkdir certdb
----b. Create a CertDB
--------i. /ldap/dsee7/bin/certutil -N -d certdb
------------1) Enter a password when prompted
----c. Import the CA cert
--------i. /ldap/dsee7/bin/certutil -A -n "OurRootCA" -t "C,," -a -I ~/OurRootCA.cer -d certdb
----d. Create a cert request
--------i. /ldap/dsee7/bin/certutil -R -s "cn=userid,ou=company,l=city,st=state,c=US" -a -g 2048 -d certdb
----e. Send the cert request to the PKI Team to generate a user cert
----f. Take the text of the generated cert & save it to a file
----g. Import the new cert into your certdb
--------i. /ldap/dsee7/bin/certutil -A -n "certname" -t "u,," -a -i certfile.cer -d certdb
----h. Create a binary version of cert
--------i. /ldap/dsee7/bin/certutil -L -n "certname" -d certdb -r > userid.bin
----i. Add the binary cert to the user's LDAP entry (version: 1 must be included - I read this in a doc somewhere, but it doesn't seem to matter)
--------i. ldapmodify
------------1) ldapmodify -h host -D "cn=directory manager" -w password -ac
------------2)
------------version: 1
------------dn: uid=userid,ou=employees,o=company
------------sn: Service Account
------------givenName: userid
------------uid: userid
------------description: Service Account for LDAP
------------objectClass: top
------------objectClass: person
------------objectClass: organizationalPerson
------------objectClass: inetorgperson
------------cn: Service Account
------------userpassword: password
------------usercertificate: < file:///home/userid/Certs/userid.bin
------------nsLookThroughLimit: -1
------------nsSizeLimit: -1
------------nsTimeLimit: 180
After doing this setup I am able to perform a search using the certificate:
ldapsearch -h host -p 1636 -b "o=company" -N "certname" -Z -W CERTDBPASSWORD -P certdb/cert8.db "(uid=anotherID)"
This search is successful, and I can see it logged, as having been a certificate based authentication:
[23/Mar/2012:13:25:20 -0500] conn=44605 op=-1 msgId=-1 - fd=136 slot=136 LDAPS connection from x.x.x.x:53574 to x.x.x.x
[23/Mar/2012:13:25:20 -0500] conn=44605 op=-1 msgId=-1 - SSL 128-bit RC4; client CN=userid,OU=company,L=city,ST=state,C=US; issuer CN=issuer,DC=corp,DC=company,DC=lan
[23/Mar/2012:13:25:20 -0500] conn=44605 op=-1 msgId=-1 - SSL client bound as uid=userid,ou=employees,o=company
[23/Mar/2012:13:25:20 -0500] conn=44605 op=0 msgId=1 - BIND dn="" method=sasl version=3 mech=EXTERNAL
If I understand correctly that would be using the part 2 of your explanation as using the binary encoded PEM to authenticate the user. If I am not understanding that corretly please let me know.
Now the part that I am really not getting is that the usercertificate that is stored on the ID is as below:
dn: uid=userid,ou=employees,o=company
usercertificate;binary:: PCBmaWxlOi8vL2hvbWUvdXNlcmlkL0NlcnRzL3VzZXJpZC5iaW4
which decodes as: < file:///home/userid/Certs/userid.bin
So I'm still unclear as to what is going on here, or what I've done wrong. Have I set this up incorrectly such that Part 2 as you described it is not what I have setup above? Or am I missunderstanding part 2 entirely?
Thanks
Brian
Edited by: BrianS on Mar 23, 2012 12:14 PM
Just adding ---- to keep my instruction steps indented.

Transition to Certificate Based Authentication

Hello,
I was hoping someone could help provide some insight into a question I have. We are in the process of rolling out a new Mobile Device Management system that will give us the ability to insert User Certificates on the mobile devices.
My question is: While we are in transition to this system, is it possible to have both Digest AND Certificate Based authentication working on Exchange (2010) without causing service disruption to the devices that have not yet been migrated to the new MDM
system?
Thank you in advance,
Ryan

Hi,
Reporting Services uses the HTTP SSL (Secure Sockets Layer) service to establish encrypted connections to a report server. If you have certificate (.cer) file installed in a local certificate store on the report server computer, you can bind the certificate
to a Reporting Services URL reservation to support report server connections through an encrypted channel.
Server certificates are installed on the Web server and typically require no additional configuration on the clients. Server certificates allow the clients to verify the identity of the server.
Because, some Web sites and applications might require client certificates. Client certificates are installed on the client and allow the server to authenticate the clients. For more information about configuring client certificates, see
Enabling Client Certificates in IIS 6.0 . But Client certificates is not supported in the SSRS 2005 later version. So SSRS 2008 R2 will not allow the server to authenticate the clients.
More details information in article below for your reference:
Configuring a Report Server for Secure Sockets Layer (SSL) Connections
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

ActiveSync with Certificate-Based Authentication

We are trying to setup ActiveSync with certificate-based authentication against Exchange 2010 SP2, but with no luck.
What has been done so far:
OWA over https works fine. A public, trusted certificate is in place.
Setup ActiveSync against this Exchange server: works fine, using user name/password.
Issued a user cert, signed with an internal CA, CA-cert successfully imported into al client devices.
Created a new OWA-site with cert-based authentication (just to make sure it works), imported user certificate into a mac, visit this OWA site - cert-based authentication works fine.
Now, with the configuration utility, created configuration profile with that user cert and an ActiveSync account, left password blank and chose the imported cert (p12) as authentication means.
After installing that last profile the device keeps asking for a password and refuses to synchronize. Logs on the server show error 401.2, so I assume iPhone is ignoring the cert and is trying to use password-authentication instead.
The devices tested were iPhone 3G with IOS 4 and iPad 2 with IOS 5.
Any help will be greatly appreciated.
Roman.

No-one with this experience?
We've done some network analysis (as much as was possible to decrypt) and could see, that the server sends an SSL-Alert (rejection?) to the client after the client presents the certificate.
That explains why the client falls back to password-authentication, but it does not tell us why the server rejects the cert (that is accepted perfectly when accessed from a browser) in first place.

SSO Certificate-based authentication problem

Hello,
I have successfully configured certificate-based authentication, and I am able to authenticate with a user certificate that I created with OCA which is stored in the user's profile in OID. Here lies my problem, it seems as if the authentication module (ssomappernickname) only validates against the first certificate stored in the user's profile(userCertificate attribute). This is after I add another certificate to the user's profile. Below is the problem I am describing during my tests:
Order of certificates stored in user's profile.
1. valid cert, invalid cert -> successful authentication
2. invalid cert, valid cert -> unsuccessful authentication (it should STILL be successful here)
Shouldn't the SSO authentication module search each binary certificate in the multi-value attribute for the correct certificate? Or is there some LDAP control that I need to set in order to get this problem solved? Basically, I need to be able let user's perform certificate authentication against multiple certificates in their profiles.

For the benefit of anyone finding this, in my case this problem was resolved by reimporting my internal CA's Cert into the ASA.
I suspect I had inadvertently imported an expired CA Cert into the ASA and this rather un-informative error 1838 is trying to tell you this.

Certificate based authentication using amclientsdk

Hi there,
We have written custom authentication framework around the amclientsdk. we are able to use the basic authentication (user/password) service configured in access manager for authentication. But we also like to do certificate based authentication where the user choose the the logon using certificate link and certificate from browser will be preseneted to our custom framework and from there i am using the AM API to invoke Cert auth service.It didn't work and reports User certificate not found error. I don't how to present the retrived user certificate to access manager as there is no call backs for Cert auth service.
Our custom application and access manager are running under different sun web server instance. And both configured for SSL (client authentication not required mode).
I tried changing the access manager instance to SSL client authentication required mode that time it sent 403 error code. but i need the previous scenario to work.

Hi there
I've got to get this working aswell.
In my case I've got to have both the user/password authentication OR certificate based.
The thing is, the documentation says that I need to have the containers (don't know if both the am server and the agent containers or only one of them ) with SSL and "Client Authentication enabled"... now the problem is, when I make it Client Authentication Enabled the container gives me a similar error to the one you described, this is because the server requests the browser to send a certificate when trying to access the server .....
Can you give me any pointers to how this is supposed to be done? I would really appreciate help with this.
Thanks
Rp

OCSP Validation in Certificate-Based Authentication

Hi,
Has anybody done OCSP Validation in Certificate-Based Authentication ? If yes - then please describe how can we configure an OCSP responder for Certificate Validation?
Regards,
YK

Hi,
Thanx for all of ur replies :)
I am now able to do lot of stuff using Identity Server :)
My main target is to use Identity Server for certificate-based authentication by enabling OCSP validation.
First I configured Web server to enable SSL and client authentication. Then I configured Identity Server and enabled the Certificate based authentication. I edited the certificate authentication properties and enabled the OCSP validation check. I provided the OCSP responder address and corresponding CA name in AMConfig.properties.
Now I am testing this setup up as follows.
1- I try to access the default index page by following URL
https://identity-1.identity.com:58090/
2- It asks for client certificate to choose from available certificates
3- I select a certificate (issuer of this cert is configured for OCSP validation) and proceed
4- Identity Server make an OCSP request and send it to my OCSP responder
5- OCSP responder response with revocation status 'good'
6- Now I get the server certificate on browser
7- I press OK and I see the index page of Identity Server
I think it is working fine now :)
now if in step 3, I select a wrong certificate i.e. issuer of this certificate is not configured for OCSP validation then It shows the DNS Error Page. Why dont it show the proper authentication failed page of Identity Server? If I see the error log for the web server I see the following error:
[03/Jun/2003:11:18:10] failure ( 1692): Error receiving connection (unable to map error number -8062)
What does it mean ? Any ideas ?
Regards,
Yasir Khan

The latest version of Reader Mobile iOS (11.6) support certificate-based authentication (for LiveCycle RightsManagement server)?

The previous release (10.1) say: "Support for our other LiveCycle authentication types may appear in future releases, including Kerberos, Smartcard/PKI certificate-based authentication, SAML-based authentication, or other SSO mechanisms."
Now in 11.6 certificate-based authentication is enabled?
Thanks

Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.

Certificate based authentication to Reporting services (2008r2)

Is it possible to use certificate based authentication to reporting services website? I found solutions for windows basic and forms authentication types.
Best regards

Hi,
Reporting Services uses the HTTP SSL (Secure Sockets Layer) service to establish encrypted connections to a report server. If you have certificate (.cer) file installed in a local certificate store on the report server computer, you can bind the certificate
to a Reporting Services URL reservation to support report server connections through an encrypted channel.
Server certificates are installed on the Web server and typically require no additional configuration on the clients. Server certificates allow the clients to verify the identity of the server.
Because, some Web sites and applications might require client certificates. Client certificates are installed on the client and allow the server to authenticate the clients. For more information about configuring client certificates, see
Enabling Client Certificates in IIS 6.0 . But Client certificates is not supported in the SSRS 2005 later version. So SSRS 2008 R2 will not allow the server to authenticate the clients.
More details information in article below for your reference:
Configuring a Report Server for Secure Sockets Layer (SSL) Connections
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Certificate based authentication for Exchange ActiveSync in Windows 8.* Mail app

I have a Surface Pro and want to setup access to my company's Exchange server that accepts only Exchange ActiveSync certificate-based authentication.
I've installed server certificates to trusted pool and my certificate as personal.
Then I can connect thru Internet Explorer, but this is not comfortable to use.
I don't have a password because of security politics of our company. When I'm setting up this account on my Android phone I'm using any digit for password and it works perfectly.
Can someone help to setup Windows 8 metro-style Mail application? Does it supports this type of auth? When I'm trying to add account with type Outlook, entering server name, domain name, username, 1 as a password then I've got a message like "Can't
connect. Check your settings."
Is there any plans to implement this feature?

For what it's worth we have CBA working with Windows 8.1 Pro. In our case we have a MobileIron Sentry server acting as an ActiveSync reverse-proxy, so it verifies the client cert then uses Kerberos Constrained Delegation back to the Exchange CAS, however
it should work exactly the same to the Exchange server directly. I just used the CA to issue a User Certificate, exported the cert, private key and root CA cert, copied to the WinPro8.1 device and into the Personal Store. Configured the Mail app
to point at the ActiveSync gateway, Mail asked if I would like to allow it access the certificate (it chose it automatically) and mail synced down immediately...
So it definitely works with Windows Pro 8.1.

Need Help about Certificate based Authentication

Hi friends..
Currently, i'm trying to develop an applet that using Certificate Based Authentication..
i have looked at this thread : http://forums.sun.com/thread.jspa?threadID=5433603
these is what Safarmer says about steps to generate CSR :
0. Generate key pair on the card.
1. Get public key from card
2. Build CSR off card from the details you have, the CSR will not have a signature
3. Decide on the signature you want to use (the rest assumes SHA1 with RSA Encryption)
4. Generate a SHA1 hash of the CSR (without the signature section)
5. Build a DigestInfo structure (BER encoded TLV that you can get from the PKCS#1 standard) that contains the message digest generated in the previous step
6. Send DigestInfo to the card
7. On the card, the matching private key to encrypt the DigestInfo
8. Return the encrypted digest info to the host
9. Insert the response into the CSR as the signature
Sorry, i'm a little bit confused about those steps.. (Sorry i'm pretty new in X509Certificate)..
on step 4,
Generate a SHA1 hash of the CSR (without the signature section)
Does it mean we have to "build" CSR looks like :
Data:
Version: 0 (0x0)
Subject: C=US, ST=California, L=West Hollywood, O=ITDivision, OU=Mysys, CN=leonardo.office/[email protected]
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
RSA Public Key: (1024 bit)
Modulus (1024 bit):
00:be:a0:5e:35:99:1c:d3:49:ba:fb:2f:87:6f:d8:
ed:e4:61:f2:ae:6e:87:d0:e2:c0:fd:c1:0f:ed:d7:
84:04:b5:c5:66:cd:6b:f0:27:a2:cb:aa:3b:d7:ad:
fa:f4:72:10:08:84:88:19:24:d0:b0:0b:a0:71:6d:
23:5e:53:4f:1b:43:07:98:4d:d1:ea:00:d1:e2:29:
ea:be:a9:c5:3e:78:f3:5e:30:1b:6c:98:16:60:ba:
61:57:63:5e:6a:b5:99:17:1c:ae:a2:86:fb:5b:8b:
24:46:59:3f:e9:84:06:e2:91:b9:2f:9f:98:04:01:
db:38:2f:5b:1f:85:c1:20:eb
Exponent: 65537 (0x10001)
Attributes:
a0:00
on step 5, Build a DigestInfo structure (BER encoded TLV that you can get from the PKCS#1 standard) that contains the message digest generated in the previous step
How DigestInfo structure (BER encoded TLV that you can get from the PKCS#1 standard) looks like?
And what is the DigestInfo Contains, and what is TAG for DigestInfo?..
Please help me regarding this..
Thanks in advance..
Leonardo Carreira

Hi,
Leonardo Carreira wrote:
Sorry, Encode the Public Key is handled by On Card Application or Off Card Application?..
I think its' easier to encode the public key by Off Card app..
Could you guide me how to achieve this?, i think Bouncy Castle can do this, but sorry, i don't know how to write code for it.. :( All you need to do is extract the modulus and exponent of the public key. These will be in a byte array (response from your card) that you can use to create a public key object in your host application. You can then use this key to create a CSR with bouncycastle.
I have several some questions :
1. Does Javacard provide API to deal with DER data format?JC 2.2.1 does not buy JC 2.2.2 does, however I believe this is an optional package though. You can implement this in your applet though.
2. Regarding the Certificate Based Authentication, what stuff that need to be stored in the Applet?..
- I think Applet must holds :
- its Private Key,
- its Public Key Modulus and its Public Key Exponent,
- its Certificate,
- Host Certificate
i think this requires too much EEPROM to store only the key..This depends on what you mean by Certificate Based Authentication. If you want your applet to validate certificates it is sent against a certificate authority (CA) then you need the public keys for each trust point to the root CA. To use the certificate for the card, you need the certificate and corresponding private key. You would not need to use the public key on the card so this is not needed. You definitely need the private key.
Here is a rough estimate of data storage requirements for a 2048 bit key (this is done off the top of my head so is very rough):
~800 bytes for your private key
~260 bytes per public key for PKI hierarchy (CA trust points)
~1 - 4KB for the certificate. This depends on the amount of data you put in your cert
3. What is the appropriate RSA key length that appropriate, because we have to take into account that the buffer, is only 255 bytes (assume i don't use Extended Length)..You should not base your key size on your card capabilities. You can always use APDU chaining to get more data onto the card. Your certificate is guaranteed to be larger than 256 bytes anyway. You should look at the NIST recommendations for key strengths. These are documented in NIST SP 800-57 [http://csrc.nist.gov/publications/PubsSPs.html]. You need to ensure that the key is strong enough to protect the data for a long enough period. If the key is a transport key, it needs to be stronger than the key you are transporting. As you can see there are a lot of factors to consider when deciding on key size. I would suggest you use the strongest key your card supports unless performance is not acceptable. Then you would need to analyse your key requirements to ensure your key is strong enough.
Cheers,
Shane

Certificate based authentication with sender SOAP adapter. Please help!

Hi Experts,
I have a scenario where first a .Net application makes a webservice call to XI via SOAP Adapter. Then the input from the .Net application is sent to the R/3 system via RFC adapter.
.Net --->SOAP -
>XI -
>RFC -
R/3 System
Now as per client requirement I have to implement certificate based authentication in the sender side for the webservice call. In this case the .Net application is the "client" and XI is the "server". In other words the client has to be authenticated by XI server. In order to accomplish this I have setup the security level in the SOAP sender channel as "HTTPS with client authentication". Additionally I have assigned a .Net userid in the sender agreement under "Assigned users" tab.
I have also installed the SSL certificate in the client side. Then generated the public key and loaded it into the XI server's keystore.
When I test the webservice via SOAPUI tool I am always getting the "401 Unauthorized" error. However if I give the userid/password for XI login in the properties option in the SOAPUI tool then it works fine. But my understanding is that in certificate based authentication, the authentication should happen based on the certificate and hence there is no need for the user to enter userid/password. Is my understanding correct? How to exactly test certificate based authentication?
Am I missing any steps for certificate based authentication?
Please help
Thanks
Gopal
Edited by: gopalkrishna baliga on Feb 5, 2008 10:51 AM

Hi!
Although soapUI is a very goot SOAP testing tool, you can't test certificate based authentication with it. There is no way (since I know) how to import certificat into soapUI.
So, try to find other tool, which can use certificates or tey it directly with the sender system.
Peter

NetMail,Netlet,NetFile stop after enabling certificate based authentication

Similar Messages

Maybe you are looking for