NETRA 7 segment display H E L P, any ideas???
when turn on the Netra t1 105 inside diplay (7 segment leds) display a sequence H, E, L, P but i no have a idea why happen this, any idea???
thanks
sorry my bad english
The Netra t1 105 documentation only describes the LEDs visable on the outside of the case.
The Netra t1 105 conains a SPARCengine CP1500 board, for which detailed documention is available at:
http://www.sun.com/oem/products/manuals/
From http://www.sun.com/oem/products/manuals/806-2104-03.pdf
<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>Quote:</b></td></tr><tr><td class="quote">
The characters in the LED displayed by OBP indicate the following:
O (The letter O ) OBP is currently executing.
E RED state exception encountered in OBP.
b Solaris boot has taken place.
H, E, L, and P This sequence (with each letter flashed at a 4-second interval) is initiated if the system is at the ok prompt for more than two minutes after power-on, without booting. It does not appear after Solaris has booted.
</td></tr></table>
Similar Messages
-
I clicked on Sky go app to install on Sat .It is now Monday night and the app Icon is greyed out and displaying "waiting". Anybody got any ideas?
Often, rebooting, or deleting the waiting app and re-installing, will do the trick.
Matt -
My screen just locked up and displayed the following pattern. Any ideas why?
Hello,
My computer went to sleep and when I awoke it and opened up safari browser, the screen locked up and displayed the attached pattern on my screen. I could still use the mouse but couldn't click on anything. I had to reboot.
Any ideas what could be wrong?If it will repeat after restart - hardware problems. Most probably memory.
Anyway run Apple Hardware Test -
Display freaking out on me, any ideas?
My display is doing something weird, and I was hoping someone else could shed some light on this for me. Every couple of minutes (4 or 5) the screen on my display will darken and then light back up. Never super dard (I can still see items on the computer) but it's annoying and I wonder if it is a symptom of a more expensive problem. It almost looks like someone is pressing the dimmer switch rapidly and setting it back to normal...any thoughts? Also, I have had this computer for about two years, do I still have a warranty?
Thanks GuysHi,
The power inverter module might be weak. The fluorescent backlight needs several hundreds of volts to stay lit. When the backlight first ignites, it requires almost a thousand volts to establish ionization.
The characteristic of the fluorescent backlight is that it will gradually get dimmer over its useful life, with about 50% of the original intensity after about 4,000 hours of operation. The touch-off voltage to achieve ignition will gradually increase as well with age, and that is what usually limits the usability of the backlight. The inverter won't be able to build up enough voltage to ignite ionization in the backlight.
In your case, I suspect the MacBook doesn't yet have 4,000 hours of run time with the backlight on. ... and the inverter is able to build up enough touch-off voltage to get the backlight started. It looks like the inverter can't sustain operating voltage, so the display is periodically losing ionization and going dark. Once ionization is lost, there is no load on the inverter, so it will be able to once again build up to the touch-off voltage... the the whole process repeats.
I'd take the MacBook to a service center or Apple retail store to see if the inverter can be replaced. It might be a warranty repair. Some other MacBook owners have had similar problems. Luckily, the inverter is only about $40 plus labor, if it is out of warranty. You may be able to replace the inverter yourself, but if you don't know how to work with high voltage components safely, let somebody else do the repair. See http://www.ifixit.com for additional repair information.
Note the screen saver isn't so much the protect the LCD as it is to limit the number of hours the backlight is on. Luckily, notebook PCs are starting to move to LEDs for backlight. The LEDs consume less power and have essentially unlimited service life. The MacBook Air has LED backlighting.
-Bill -
According to the TDM support page, this isn't possible. I tried it with a Mnidisplay port to minidisplay port cable without success. Its a shame that thunderbolt doesn't appear to be backwards compable as I could have achieved this with an older iMac.
CheersYou are correct....it will not work. Please carefully read Apple's Target Display Mode: Frequently Asked Questions (FAQ)
-
Font are not displayed anymore with Mavericks update, any idea ?
Imposible to have the correct fonts displayed with the last update.
Anyone has a solution ?
Thank you very much !
HenriI'm using Bosque
the font disappears when I'm in preview mode on Ipad and on Ibook on Mac
it's OK on Ibook author
Note that before the update of Mavericks everything was perfectly OK.
Thanks a lot for your help !
Henri
See the capture bellow : -
Lost phone but doesnt display it on phone locator , any ideas?
Is there any way to locate my phone when not on the network?
Your cellular service provider may be able to track it for you for a fee.
-
The blue icloud backup notification box has "frozen" my iPad screen. I am unable to clear it. I am currently trying to run down the battery 0% to see if it will automatically reset this way. Are there any other ideas?
A reset should help. Tap and hold the Home button and the On/Off button for approximately 10-15 seconds, until the Apple logo reappears. Release both buttons and await restart.
-
After a routine Windows 7 update, Firefox will not load the HBO GO content when you attempt to sign in. Normally, I do not have to sign in unless I log into the account via my Droid or other PC. I tried it in Google Chrome and works fine on my Droid. Also, now when going to full screen option, Flash opens a new window and have lost the options to control the display ratio and toolbars. Any ideas?
It sounds like we've got a number of *different* problems on this thread. I'll try and respond to a few of them.
@filter 2.5 and everyone else running into a green screen issue. Please try the solution outlined in the post below to see if it will allow you to use hardware acceleration. The other alternative is to try a different ATI driver.
http://forums.adobe.com/message/4865912#4865912#4865912#4865912
@pipseer - Somehow Internet Explorer's activex filtering was enabled on your system. This troubleshooting is also described in this FAQ: ActiveX Filtering in Internet Explorer
@Sahloknir - For the sound issue, we're going to want your system specs. Please start a new thread with:
Operating system
Browser
Flash Player version
Dxdiag Report Instructions
Sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5 video
Non-HTML5 video
@mem2013 - The Flash Player update service will not impact Flash Player's performance. This is a separate service that runs for just an instant on your system once an hour (if you have automatic updates enabled.) Changing it from manual to automatic shouldn't make any difference. -
How can i display 7 segment dispay on front panel using any kind of input
Hi,
I need help..!! I need to dispay the numeric data in 7 segment format. Is it possible to do in labview?you need to display the number onto a 7 segment display?
i think you would need sometype of microcontroller board like the AVR or the aurdino. and use the visa usb port to display out into the 7 segment display.
i am new to this too. but that's what i would do.
i hope someone with more expertise can give better advice.
Arduino and 7 Segment LED
7 Segment LED
The
seven segment display is a pretty simple device. Its actually just 7
LEDs (8 really including the decimal point) arranged so different
combinations can be used to make numerical digits. This tutorial will
show you how to wire one up and drive it with an Arduino.
Message Edited by krispiekream on 07-23-2009 11:48 AM
Best regards,
Krispiekream -
Hi,
My project is to do with a petrol pump and the simulation of it.
My problem is that i need to create a seven segment display in an interface containing Jbuttons that when pressed will run methods.
I have the Jbuttons created and there should be(which there currently isnt) a counter shown next to the button for the following method in the Jframe
public void StartSqueezing()
NozzleReady=false;
NozzleInUse=true;
NozzleNotInUse=false;
do{
if( LitresDispensedPerTransaction < PetrolLimit)
LitresDispensedPerTransaction = (LitresDispensedPerTransaction + 0.10);
try {
Thread.sleep(1000) ;
//1000 millisecs
catch(InterruptedException ex) {
while (NozzleInUse = true );
I also have this further down- getPrice is just another method in the code.
private void makeFrame()
frame = new JFrame("Peter Pump");
Container contentPane = frame.getContentPane();
contentPane.setLayout(new GridLayout(3, 2));
JButton getPrice = new JButton ("getPrice");
contentPane.add(getPrice);
getPrice.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) { getPrice(); }
I need a seven segment display that will count up the number of litres of fuel dispensed when the Jbutton representing the above "StartSqueezing" method is pressed. The counter should move up by 0.1 each time.
I am by no means asking anybody to do this for me, i would just like some help and to be pointed in the right direction for what i need to read up about.
Many Thanks,
EdwardDarryl,
He is a guy at my college, its ok nobody likes him anyway :P i will just completely ignore what he said as he is actually no better than i am haha.
Anyway, back to something that matters.....
public void StartSqueezing()
NozzleReady=false;
NozzleInUse=true;
NozzleNotInUse=false;
Runnable run1 = new Runnable() { public void run()
do{
LitresDispensedPerTransaction =+ 0.10;
try { Thread.sleep(200);}
catch(InterruptedException ex) {}
while (NozzleInUse == true );
Thread thrd1 = new Thread(run1);
thrd1.start();
}I have put this is the action listener of a button and it wont work....any ideas???
Edward -
I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor. The new Apple monitor is fine. On the cinema monitor everything is blown up pretty large. Any ideas on how to solve this?
The 30" display needs a DUAL-LINK adapter.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter> -
I want to connect my IMAC to TV with HDMI cable. I did it before going to Dispaly and Arrangments and then mirror. Now when I go to display I dont have to option of arrangements. Olny {Display and Color} pops up. Any ideas what happend to arrengements?
For the "Arangements" option to appear, the external display must be turned on with the correct input selected and connected to the computer. Then close system prefs, reopen, go to "Display" and "Arrangement" will be along the top.
-
HI, I am trying to connect my macbook pro, 18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector. It all fits but the there is nothing happening? no mirroring option. Any ideas appreciated. Many thanks
to get to the Detect Displays button you have to hold down the Option key and the button appears.
SeanfromFulham wrote:
Many thanks, however I don't seem to have any relevant options under displays. -
ipone 4s display suddenly doesn't work any more. most of the time i can't even unlock my iphone as it puts the numbers itself. and if i am lucky to unlock it opens apps and does everything else whenever my finger comes near the display without even touching it. I did reset and also updated my operating system. But the problem stills shows up... can anyone help please?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
I am working on separating a face from its backgound. My problem is that I can't figure out how to include the bit of background that shows up inside the lens of his glasses. With the narrow frames, I'm stumped on how to do it. BTW, the background wa
-
Setting up TC on N (5 GHz), with older AirPort Extreme and Express on B/G
Hi there, I've done a search through the forums (and the net) to see if I can find a solution to my query, but the answer currently escapes me so I thought I'd ask outright.... I have recently purchased a Time Capsule. Previously my wireless network
-
Function module to read Comma Seperated File (CSV)
Hi, Is there any Function module to read CSV file from presentation server or Application server? Regards, Madhu
-
Forum problem:Error 310 ERR_TOO_MANY_REDIRECTS ?
Hello all, I'm trying to post something to the forum using the forums.ni.com and I get an error: The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete. T
-
How do I burn iTunes library onto DVD-RW? I'm a schmuck.
Tab: Advanced/Burn only says data - CD; Why can't I burn it as a Audio DVD. I checked help. I got Itunes 6, Sonic ain't working. Neither is Windows Media player. I don't get it. I created playlist, went back to main library, selected all, then back t