Netra T1 105, Unresponsive after installing LOM 2.0

I recently purchased a used Netra T1 105, which is running SunOS 5.9. After purchasing the server, I attempted to install the "Lights Out Management 2.0" software.
I then proceeded to attempt to upgrade the LOM firmware, by running "lom -G default". However, running the command produced the output "Image Checksum", then locked the system up. At which point, the system no longer responded via the network, or via console.
After waiting a while, hoping that it would prompt me to confirm the firmware update, I decided to power-cycle the server. (I was unable to escape to LOM at the console.) After the power-cycle, the console no longer responds, nor outputs anything. I am also unable to access the system via network, which I suspect may be caused by the system wanting to perform an fsck.
Any ideas on what could be wrong, and how to fix it? Thank You!

On second read Bill i see that as well.
This is going to be unrelated but your boot-device looks a bit strange as well. You are referencing different slices on the same disk, and then referencing the disk itself and then net.
boot-device=disk:b disk:a disk net
You would be ok with referencing disk and then net if the server is not mirrored. If the system is mirrored then you would want to reference that disk as well.
either :boot-device=disk net
or: boot-device=disk disk<number> net
But the next time it does it, you could try trying sync and trying to create a crash file. Once you have the crash files you can get these analysed.
As well as this pass the server through diagnostics 3 or 4 times and check the console outputs fro details.

Similar Messages

Nokia X7 Unresponsive after Install/Uninstall

Hello,
I have a Nokia X7-00.1 RM-659 running Anna 22.8.
Whenever I insatlled or uninstall an app, the phone becomes unresponsive after the operation is finished for 20~40 seconds. After that, normal operation resumes.
As if the phone is scanning/thinking/processing in the background.
Is that a known problem? Is it going to be fixed in Belle? Is there anything I can do now to fix it?
THanks,

Hello,
I have a Nokia X7-00.1 RM-659 running Anna 22.8.
Whenever I insatlled or uninstall an app, the phone becomes unresponsive after the operation is finished for 20~40 seconds. After that, normal operation resumes.
As if the phone is scanning/thinking/processing in the background.
Is that a known problem? Is it going to be fixed in Belle? Is there anything I can do now to fix it?
THanks,

My Apple Apps are unresponsive after installing Mavericks. iBooks, Maps, App Store, iCal, etc. will open, but freeze

After installing Mavericks, I found that my Apple Apps (iBooks, App Store, Maps, iCalendar, iBooks, etc) will open but freeze or are none responsive. I have reinstalled Mavericks, did a recovery and reinstall, almost everything that I could find in other discussions. They only thing that helped was the recovery, until I tried to reinstall Mavericks. Someone please help.....

OS X Recovery does restore OS X meaning Mavericks.
Make sure there's enough storage space ...
Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
You'll see Available and Capacity. Make sure there's at least 15% available disk space.
The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.
Make sure to back up all important files first before using OS X Recovery.
OS X Recovery does require a broadband high speed internet connection.

IPad 1 unresponsive after installing iOS 5?

Not even a week ago, I downloaded the new iOS 5 for my ipad 1. At first it was fine, but after a bit of usage, it would suddenly turn itself off or restart for no reason. Eventually it kept happening more frequently and more quickly. Now it won't turn on at all, it doesn't register in my itunes when i try to sync it to my computer, it is unresponsive when i charge it and it doesn't respond when I attempt a hard restart. I'm pretty sure it's due to iOS 5 because it only started happening after I installed it, so what should I do to fix it? It's still under AppleCare warranty, should I go instore?

I had the same problem and was ready to throw It in the trash. Last night I erased my iPad and set it up as new iPad instead of restoring. I didn't turn on iCloud until after I deleted my iCloud backup and turned off contact syncing with it. Since then it hasn't crashed and it has had about 4 hours of use. 5.0.1 didn't have an effect on it. Just happy I got my iPad back!

Newbie: Macbook unresponsive after installing software updates

Hi y'all.
So, this macbook is my first Mac ever, so please bear with me if I'm asking an obvious question.
My problem is that I just got my macbook home, went through the registration, and began installing the software updates. After updating, the computer wanted to restart. After restarting, I cannot get the pointer or the keyboard to respond. I tried booting up and running the Install Disk #1 to try running disk utilities, however, I don't think my holding down the "D" or "C" keys is registering. Since there's no pinhole to forcibly eject the CD, that's now stuck in my CD/DVD drive.
Any ideas? Or is there somewhere else on this board I should look for the answer? Unfortunately, since I'm so new to Macs, I'm not sure what to do at this point.
Thanks so much for your help.
Emily

hello, dark horse.
thank you for the suggestion. the problem is/was that the keyboard was completely frozen. i couldn't boot into safe mode, i couldn't type in a password, or type anything else for that matter and have it recognized. i attached an external USB mouse and restarted and THAT worked, but i didn't have a USB keyboard.
so i took the machine back to apple. they said my macbook definitely shouldn't have been acting up like that, especially on it's very first day, so they replaced it with the new one i'm using right now.
not sure what the problem was with it. i'll give apple a second chance and see how this macbook behaves. it seems like this one is running cooler, too...

PSE 11 is unresponsive after Mavericks

PSE 11 has become very slow, sometimes unresponsive, after installing the new OS X Mavericks. Any ideas?

It is extremely important to delete preferences on updating to Mavericks:
http://barbarabrundage.com/2013/10/28/photoshop-elements-and-os-x-mave ricks/
You will want to find:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements (version number) Paths
Adobe Photoshop Elements (version number) Settings
The link tells you how to find the user library in 10.9. While you're in there go to the Saved Application States folder and delete any for PSE.
Also, if you have a wacom, it's crucial to update to the driver released the other day.

Slow after install/uninstall antivirus

My late 2013 iMac has been slow and unresponsive after install and uninstall Avira anti-virus (big mistake that was)! I tried re-installing Yosemite but that did not help. EtreCheck shows this in kernel extensions:
/System/Library/Extensions [not loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9)
However, I can't see that file with Finder or Terminal.
Is there anything I can try without doing a total clean install of OS X and then adding back all my files and apps?
Problem description:
Mac and Safari are slow - often get spinning beachball and failure to load a page.
EtreCheck version: 2.1.4 (107)
Report generated 18 December 2014 at 08:31:18 GMT+7
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2013) (Verified)
iMac - model: iMac14,3
1 2.9 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 750M - VRAM: 1024 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 10:57:6
Disk Information: ℹ️
APPLE HDD ST1000LM024 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
iMac Macintosh HD (disk0s2) / : 999.35 GB (622.71 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18619.1001606) [Support]
[not loaded] com.parallels.kext.hypervisor (8.0 18619.1001606) [Support]
[not loaded] com.parallels.kext.netbridge (8.0 18619.1001606) [Support]
[not loaded] com.parallels.kext.usbconnect (8.0 18619.1001606) [Support]
[not loaded] com.parallels.kext.vnic (8.0 18619.1001606) [Support]
/Applications/WiTopia.app
[loaded] com.viscosityvpn.Viscosity.tap (1.0) [Support]
[loaded] com.viscosityvpn.Viscosity.tun (1.0) [Support]
/System/Library/Extensions
[not loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) [Support]
Launch Agents: ℹ️
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
[running] net.witopia.WiTopiaHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
WiTopia Application (/Applications/WiTopia.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
1Password [Installed]
AdBlock [Installed]
Open in Internet Explorer [Installed]
Blur (Formerly DoNotTrackMe) [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
iMac Macintosh HD: Disk size: 999.35 GB Disk used: 376.63 GB
Destinations:
Seagate 2TB Time Machine [Local]
Total size: 1.60 TB
Total number of backups: 33
Oldest backup: 2014-11-19 14:37:53 +0000
Last backup: 2014-12-18 01:13:49 +0000
Size of backup disk: Adequate
Backup size 1.60 TB > (Disk used 376.63 GB X 3)
Seagate blue slim time machine [Local]
Total size: 750.92 GB
Total number of backups: 35
Oldest backup: 2014-10-03 04:38:29 +0000
Last backup: 2014-12-17 14:08:04 +0000
Size of backup disk: Too small
Backup size 750.92 GB < (Disk used 376.63 GB X 3)
Top Processes by CPU: ℹ️
      3% WindowServer
      0% fontd
      0% AppleSpell
      0% com.apple.WebKit.WebContent
      0% cloudpaird
Top Processes by Memory: ℹ️
198 MB com.apple.WebKit.WebContent
137 MB WiTopia
129 MB mds_stores
129 MB Finder
120 MB WindowServer
Virtual Memory Information: ℹ️
4.15 GB Free RAM
2.31 GB Active RAM
1.25 GB Inactive RAM
870 MB Wired RAM
2.41 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 17, 2014, 09:36:00 PM discoveryd_2014-12-17-213600_[redacted].crash
Dec 17, 2014, 09:34:45 PM Self test - passed
Dec 15, 2014, 05:07:21 PM Safari_2014-12-15-170721_[redacted].hang

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n   "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' /\.framework$/&&!/\/Contents\// { n++;print;} END { if(n<400) print "/System/";} ' ' { gsub(/[()"]/,"",$3);print $3;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i 'kMDItemContentType=com.apple.framework|sort' -name\ kMDItem${p[35]} );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Frameworks );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B4 4 22 69;A1 24 56 32;B7 22;B2 23;A4 39 57 70 23;B2 24;B6 23 24 4;C3 58;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Netra t1 105: Solaris 8 & 9 install failures

Hi Everyone,
I have two (2) Sun Netra T1 105 machines, each with a single 360MHz Ultra SPARC IIi and 256MB RAM. Both have 18.2GB drives that have been wiped clean.
I am connecting using Winblows 2000 and Hyperterminal, serial port B, 9600,8,n,1.
I want to install a fresh copy of Solaris 9 on these systems, but I am having absolutely no luck. I boot from the Solaris 9 install CD and the systems just hang. I've also tried to do network installs, and they hang as well.
I thought it might be my Solaris 9 install media, so I tried to install Solaris 8 using several different releases - 4/01, 10/01 & 2/02. Each time, I get the same result - the boxes just hang.
I make it this far (serial, MAC, and hostid x'ed out to keep our security folks happy):
Netra t1 (UltraSPARC-IIi 360MHz), No Keyboard
OpenBoot 3.10.25 ME, 256 MB memory installed, Serial #XXXXXXXX.
Ethernet address 8:0:20:XX:XX:XX, Host ID: XXXXXXXX.
ok boot cdrom
Boot device: /pci@1f,0/pci@1/pci@1/ide@e/cdrom@2:f File and args:
SunOS Release 5.9 Version Generic 64-bit
Copyright 1983-2002 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
And then it hangs forever. In the OBP, I've set the input and output ttys to ttyb to eliminate LOM interference.
Here is a snapshot of the printenv output:
ok printenv
Variable Name Value Default Value
tpe-link-test? true true
scsi-initiator-id 7 7
keyboard-click? false false
keymap
watchdog-timeout 65535 65535
watchdog-enable? false false
ttyb-rts-dtr-off false false
ttyb-ignore-cd false true
ttya-rts-dtr-off false false
ttya-ignore-cd false true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
cpci-probe-list 0,1,2,3,4,5,6,7,8,9,a,b, ... 0,1,2,3,4,5,6,7,8,9,a,b, ..
pcia-probe-list 1 1
pcib-probe-list 1,2,3 1,2,3
mfg-mode off off
diag-level min max
d7s-flipped? false false
#power-cycles 67
system-board-serial#
system-board-date
last-poweroff-cause 0 0
env-monitor disabled enabled
shutdown-temperature 74 72
warning-temperature 69 67
fcode-debug? false false
output-device ttyb ttya
input-device ttyb ttya
load-base 16384 16384
auto-boot-retry? false false
use-boot-table? false false
boot-command boot boot
auto-boot? false true
watchdog-reboot? false false
diag-file
diag-device net net
boot-file
boot-device disk net disk net
local-mac-address? true false
net-timeout 0 0
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? false false
nvramrc
security-mode none
security-password
security-#badlogins 21
oem-logo
oem-logo? false false
oem-banner
oem-banner? false false
hardware-revision
last-hardware-update
diag-switch? false false
I have the feeling I am missing something very simple, but I am at a loss. Any assistance is greatly appreciated!
Chad E. Carlson
Skandia Technology Center, Inc.
Shelton, CT USA

This could be part of the problem. How exactly did you wipe the disks in the other machine, and what type of machine was it?I installed the disks into a Sun Netra T1125, partioned (using format) and newfs'd them to create basic file systems.
How about a "boot cdrom -s"? If it boots this way, does "format" see the disks ok?Tried this, same result. The systems don't make it past the licensing terms message.
As for the mini tests - I ran them against every device, and everything seems OK. The floppy test threw an error because I didn't have a floppy drive installed.
I have a 4 port QFE card installed in the machine - all of the loopback tests passed, but the transceiver tests failed. None of the ports are connected (no cables). The two built in Ethernet ports also passed loopback, and 1 passed the transceiver test (the other failed) - the transceiver that passed has a network cable installed.
Testing /pci@1f,0/pci@1/pci@1/pci@f/SUNW,qfe@3,1
Internal loopback test -- succeeded.
Transceiver check -- failed
Selftest failed. Return code = -1
Testing /pci@1f,0/pci@1/pci@1/pci@f/SUNW,qfe@2,1
Internal loopback test -- succeeded.
Transceiver check -- failed
Selftest failed. Return code = -1
Testing /pci@1f,0/pci@1/pci@1/pci@f/SUNW,qfe@1,1
Internal loopback test -- succeeded.
Internal loopback test -- succeeded.
Transceiver check -- failed
Selftest failed. Return code = -1
Testing /pci@1f,0/pci@1/pci@1/pci@f/SUNW,qfe@0,1
Internal loopback test -- succeeded.
Transceiver check -- failed
Selftest failed. Return code = -1
Testing /pci@1f,0/pci@1,1/network@3,1
Internal loopback test -- succeeded.
Transceiver check -- failed
Selftest failed. Return code = -1
Testing /pci@1f,0/pci@1,1/scsi@2
Testing /pci@1f,0/pci@1,1/network@1,1
Internal loopback test -- succeeded.
Transceiver check -- passed
Could I be experiencing problems because of the QFE card?? Doesn't seem logical, but.... perhaps I will yank it out and try again....

Netra T1 105, issue with LOM prompt

Hello all,
I am having issue in accessing OK prompt from LOM menu. When I do the poweron, it sits on LOM event: power on. When I do, console it shows stand by. Please help me out here as I am working on making this server to respond. Thanks.

Hi. Could you tell me if patches 108620-04 or higher & 108673-02 or higher are already installed on the Netra t1 105?
*How to determine if the Netra[TM]T1 model 105 server PROM patches are current [ID 1010561.1]*
Description
How to determine if patches 108620-04 or higher & 108673-02 or higher are already installed on the Netra t1 105.
Steps to Follow
These two patches have to do with OBP(OpenBoot PROM) and the user prom.
108620-04 Hardware/PROM: Netra t1 Standalone User PROM Update
108673-02 Hardware/PROM: Netra t1 System PROM Update
108673-02 delivers OBP 3.10.27.
This can be checked via the OBP with the .version command.
OBP Example:
ok .version
Release 3.10.27 ME created 2000/06/22 16:45
OBP 3.10.27 2000/06/22 16:45
POST 1.17.0 2000/03/06 12:18
This can be checked via Solaris[TM] with: prtconf -V
Solaris[TM] Example:
# prtconf -V
OBP 3.10.27 2000/06/22 16:45
If you see Release 3.10.27 you do not need to install this patch.
108620-04 delivers the dropins
These can be checked at the ok prompt with the show-dropins command.
Example:
ok show-dropins
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,0
Dropin name Size Checksum Date Date Version Vendor
created flashed
OBP 4a1bc cc30 06/22/2000 3.10.27
keyboards bf0 dd75
fonts af6 6b86
obdiag bd34 aec5
pci1002,5654 d34 7190
pci1002,4755 cb0 c382
pci1002,4750 1794 3f65
class060400 44e 17cc
userprom 246 b3ba
pci108e,1001 32a4 d714
pci1011,22 47e 69c9
pci1000,3 2824 feb4
class010100 1210 ce35
i2c 1fe 5a8f
i2c-cs2 1f4 bd2a
nvinit- 172 0 10/08/1999 00/00/0 0.0
POST 45340 519 03/06/2000 1.17.0
PROM size = 100000 bytes Available for Use = 3d958 bytes
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,400000
Dropin name Size Checksum Date Date Version Vendor
created flashed
ebus-14.400000 b0 9fa6 06/09/1999 06/09/1999 1.0
SUNW,flapjack
probe+ 250 c2b5 01/06/2000 01/06/2000 2.0
SUNW,flapjack
banner- 1aa 6f35 12/10/1999 12/10/1999 1.0
SUNW,flapjack
tty-control 150 a863 12/01/1999 12/01/1999 1.0
SUNW,Flapjack
PROM size = 200000 bytes Available for Use = 1ff984 bytes
Dropins for Flash device: /pci@1f,0/pci@1,1/ebus@1/flashprom@10,800000
Dropin name Size Checksum Date Date Version Vendor
created flashed
PROM size = 200000 bytes Available for Use = 200000 bytes
ok
The part that is of interest is about two thirds of the way down to do
with ebus-14.400000, probe+, banner- and tty-control.
If the Checksum matches you you don't need to install this patch.
On the other hand it won't cause any problems to reinstall both patches.

Installing solaris 10 on netra t1 105

im need to sun computer system....i have got to the point of hyperterm lom> and booting the system, but it has no software installed.. im trying to install solaris on a sun netra t1 105 256 mb ram and 19gb hd and NO CDROM im trying to "network install" from a windows 2003 server.. is this possibly or do i have to a sun workstation to install as boot/install server... or could i connect the hard drive to a windows 2003 server and format and install solaris on it using virual pc.... i haveit networked to my wireless router as well a x86 computer...
Edited by: lebaronman on Feb 28, 2008 2:01 AM

I have no really good answer here..
I guess you are using a Netra T1 AC200, right?
Some futher questions;
Are you using an internal CD-Rom?
Have you tried the CD-Rom before so you know it works?
What happens if you try "boot cdrom" without inserting any CD? I think the bootpath to the cd-rom looks a bit strange, and testing that would be the easiest way of verifying if its correct or not. If the path is correct you should get a different error if you attemt to boot from a non-existing CD.
Last question; which Solaris 10 version did you download?
7/M.

I just installed latest updates and now itunes becomes unresponsive after 10-15 minutes

The latest OSX update (Security Update 2013-003) perhaps is breaking itunes. It becomes unresponsive after 10-15 minutes and I have to force quit it each time.

with that one, let's try the following procedure.
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
Description of the Windows Installer CleanUp Utility
next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
Removing iTunes and QuickTime for Windows
now try another itunes install. does it go through properly this time?

Clean install on Netra T1 105 using terminal service

Im using a windows hyper terminal session onto a Netra T1 105 and am able to boot and login as normal, however my problem lies with being able to do a fresh install from this terminal, on a normal sun box I shutdown and get the ok prompt and from there type boot cdrom, from the terminal i cant do this, how do i go about booting from a cdrom from the terminal
thanks in advance

Found that when terminalling into a box to execute the STOP-A command you must use Ctrl-Break

Netra t1 105 install solaris9 from terminal session

I have quite a problem, I am using a windows box hyper terminal into a netra t1 105 box and am able to boot up and log into the system, however as i am on a windows box i dont have the stop-a button to press when i power it down so as to boot from cdrom, I am trying to do a clean install of solaris 9 onto this box. It seems the more searching I do on this topic the more I hit my head against a brick wall....any help would be appreciated

I believe you're looking for the STOP+A equivalent on a serial line: send a BREAK signal on the serial line.
On some (but definitely not on all) windows versions, the bundled hyperterm can send a BREAK signal by
pressing "control + break". Last I've looked into this I tried Win95 and Win NT 4.0 (?), one hyperterm could
send a BREAK the other doesn't. But I don't remeber the details any more.
I just googled a bit, and this page suggest to upgrade hyperterm to some 5.0 revision, to enable the BREAK
signal:
http://accuratedatasystems.com/configure-9180-HyperTerm.htm

Netra T1 105 LOM & OBP

Hi, I bought a Netra T1 105 recently. I connected the LOM port (serial port A) to another Solaris 10 (x86) machine via a null modem cable and am able to see the boot messages and the lom propmpt too. The funny thing is the keyboard is neither responding at the lom prompt nor am I able to send a break signal to fall back to the OK prompt. How do I get my keyboard to tell LOM to drop to OBP? Please let me know.

1. What type of cable are you using?
2. Are you connected to the serial A or B?
The cable that I use is a flat one, and I'm pretty sure that the usual straight thru ethernet or crossover cables do not work.
Serial Port Pin ------------------------- 9-pin Connector
(RJ45) ------------------------------------ (DB-9)
Pin 1 (RTS) -----------------------------> Pin 8 (CTS)
Pin 2 (DTR) -----------------------------> Pin 6 (DSR)
Pin 3 (TXD) -----------------------------> Pin 2 (RXD)
Pin 4 (Signal Ground) ---------------> Pin 5 (Signal Ground)
Pin 5 (Signal Ground) ---------------> Pin 5 (Signal Ground)
Pin 6 (RXD) -----------------------------> Pin 3 (TXD)
Pin 7 (DSR) ----------------------------> Pin 4 (DTR)
Pin 8 (CTS) -----------------------------> Pin 7 (RTS)

Netra T1 105 Solaris 10

Hi there,
I sucessfully installed Solaris 10 on my Netra T1 105, but when booting from the Jumpstart-Server, I saw that the machine tries to use old informations that seem to be stored on the hostid-chip. So, I wated to ask, if there's a documentation how to erase or modify this information (hostname, ip-addresses...).
Also I wated to know, if anybody has an idea of updating the installed LLOMLite Software?
Thanks for an answers
Thorsten

Well, the SPARC machines only stores one thing; their hostid and ethernet address (ok, thats two things). When you jumpstart a SPARC machine, it makes an ARP request with its ethernet address, and then the jumpstart server responds with a hostname, the client then uses the hostname to find its IP address.
So you probably got an old IP/Hostname on your jumpstart server, if you don't there is probably another server on your network which has old information.
As to LOM; there used to be a patch for it, cant remember which one though.

Netra T1 105, Unresponsive after installing LOM 2.0

Similar Messages

Maybe you are looking for