Netra t1 with solaris 9 fresh install on/standby switch

Hi,
I recently installed solaris 9 onto my Netra 105 box. For the likes off me I can't figure out why the on/standby switch simply does not work since reinstalling. The only way I can power down the box is by literally unplugging it from the wall. I am a total newbie to Sun boxes (& solaris for that matter) & have had zero luck in finding any info specific info relating to this. Can some kind soul put me on the right track?

I have down precisely what you have recommended & the thing still won't go into standby. After executing poweroff from the LOM prompt It just sits there continually humming away. Yet it worked fine prior to the installation off solaris 9 from solaris 8. I have even reinstalled again, this time making sure to include the power management options. All reinstalls were done with the "initial installation" option.
Here is a screen dump off the unit booting & me executing the poweroff commnd:
lom>reset
LOM event: host reset
Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.10.25 ME, 512 MB memory installed, Serial #14315586.
Ethernet address 8:0:20:da:70:42, Host ID: 80da7042.
Boot device: disk File and args:
SunOS Release 5.9 Version Generic_112233-05 64-bit
Copyright 1983-2002 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
configuring IPv4 interfaces: hme0.
configuring IPv6 interfaces: hme0.
starting DHCP on primary interface hme0
Hostname: unknown
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c0t0d0s7: is stable.
Starting IPv6 neighbor discovery.
Setting default IPv6 interface for multicast: add net ff00::/8: gateway fe80::a00:20ff:feda:7042
starting rpc services: rpcbind done.
Setting default IPv4 interface for multicast: add net 224.0/4: gateway 192.168.0.125
syslog service starting.
syslogd: line 24: WARNING: loghost could not be resolved
Jun 27 19:19:36 unknown /usr/lib/power/powerd: powerd: failed to get idle time for console mouse
volume management starting.
The system is ready.
unknown console login: root
Password:
Last login: Fri Jun 27 19:00:09 on console
Jun 27 19:19:55 unknown login: ROOT LOGIN /dev/console
Sun Microsystems Inc. SunOS 5.9 Generic May 2002
# #.lom>poweroff
lom>
This problem is annoying the hell out off me. Everyone I have spoken to hasn't even heard off this problem.
Any other advice you can give would be very much appreciated.

Similar Messages

Network issues with Leopard fresh install

I have an iBook that I was running Leopard on with no issues yesterday. It is no longer my main computer, so I wanted to wipe everything and start from scratch with a fresh install of Leopard. The install went smoothly. I did an Erase & Install setup from a Leopard Upgrade disc (but already had Leopard on my system so upgrade verified OK). When I booted up for the first time, it appeared everything was working normally.
I went online, downloaded a couple pieces of software I frequently use, and then started to set things up. This is when I ran into issues. I could browse the web without a problem. I could set up email with POP access, but not IMAP. AIM with Adium connects just fine. Tweetie won't connect. Dropbox won't connect. It's like some ports are being blocked, but others aren't, and I can't figure out why.
I have tried/verified:
OSX firewall is off
Restarted router/cable several times
iBook is in router's DMZ- outside of router firewall
Repaired permissions
Reset PRAM
Anyone have any suggestions or other troubleshooting ideas?

Here are the steps to selling*:
http://www.macmaps.com/selling.html
Mac Pros that shipped with Leopard should install from the Mac Pro labelled discs. Those that came with pre-Leopard, you should still include the Mac Pro discs, though if you desire to install Leopard on them, you should also include the Leopard discs that are retail. Leopard retail looks like * and do not say Upgrade, DropIn, or OEM.
- * Links to my pages may give me compensation.

It will not open even with a fresh install

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1026778 /questions/1026778]''
Firefox has not opened for a while. I did a fresh install on a windows 8.1 64 bit operating system and the darn thing still will not open. I am not happy about this.

I'm re-installing from a cd. I have upgraded since Aperture 1.0!! When I use the install from Aperture 3.0, it won't open my library (because it has been updated to a newer version of Aperture). So, I tried to open Aperture with the sample library on the disc. No go. States I don't have permissions.
I updated the re-installed version of Aperture 3.0 to the current 3.2.3. I still CANNOT open Aperture. I seem to be getting the same error message.
I have fixed permissions and all. My Mac is up to date. I don't know what else to do.
I have a MacBook Air and Aperture works great on it. Problem is my huge library is difficult to transfer or duplicate since it is so large. I think I will just take out my hard drive from my Mac Pro and put it in a desktop enclosure.
I can't even open Aperture from my Vault.

How do i use an old time machine with a freshly installed Mountain Lion

I recently formatted my HD, that was on OS Lion, and installed a fresh copy of OS Mountain Lion. Is it possible to still use my time machine machine backup (from before i formatted my hard drive) with the newly formatted HD running Mountain Lion? or do i just start from scratch again.
Thanks for the responses
MacBook Pro 2010
OS 10.8 (mountain Lion)

This is the closest thing to my query that I have been able to find. I recently installed ML on my late 2011 MBP. I have tons of backups from Lion and I want to continue backing up ML. I have hesitated to do so as I fear that I will not be able to recover my data and settings in the event that I decide to downgrade to Lion. If I was to downgrade back doe Lion; could I use a ML TM backup to recover my files and settings?

Trouble with Solaris 10 install on SunBlade 100 using Media CDs from Sun

Hello World,
My SunBlade 100 was not reading various burned Solaris 10 media, so I purchased the media kit from Sun. The installation is successful up until the point where it asks for CD2. I didn't even hear the drive spin when I clicked "Next" after inserting CD2.
I know it is not the CD drive since it obviously works for CD1. It is also not an intermittent problem with the CD drive because CD1 works each time I run the install. I also don't think it is the media since CD2 went right from the factory envelope to my CD drive.
So:
1. Has anyone encountered something like this?
2. Can I resume the installation from the command line?
Many Thanks,
Greg

Actually ...
Yes, it can be the optical drive.
Those factory shipped drives in the SB100's were prone to spontaneously failing, one minute to the next.
Additionally the CD's are actually written differently, whether they are the bootable ones in the set versus the non-bootable CDs in the set.
Data track layouts are different.
The optical drive could commonly have difficulty reading every disk you ever insert into it.
Borrow a replacement drive from a PeeCee.
Jumper it the same as the current drive and just use it.
If that works, then go buy a replacement.
Optical read-only drives are laughably cheap.
Optical read/write DVD drives are inexpensive, as well.

Xwin with solaris 10 installed in core mode

Hello,
I've installed the Solaris 10 in core mode. The problem is that I need to use the Xmanager software but i don't know which packages must be installed to run the Xmanager . Could someone help me. Thank you in advance
Huy Nguyen

What account are logged as? You can type "who" command without the quotation. You should be logged in a root. Root has total control of the system. If you want to go to the root account type "su" command.

Help with solaris 10 instalation

Hi,
after installing solaris 10, its asking me for login name & password? what should I do?

Hi
During the installation, you were asked for the root password. So you need to login as user 'root' using this password.
The next thing that you should do is to create an ordinary user account for yourself. There's more than one way to do this, but an easy one is to launch /usr/sbin/smc (Solaris Management Console), select 'This Computer' in the Toolboxes list, then System Configuration (left panel) -> Users. After that it's something like Action->Add User (I don't have the necessary priveleges on the machine that I'm using). Then you can logout as root and log back in as the user that you created.
Paul

New SCSI controller on Netra T2000 with Solaris 10

I have the following problem. I just have installed additional SCSI controller to my Netra T2000. The controller is X4422A Sun Dual Gigabit Ethernet + Dual SCSI PCI Adapter. After starting OS I can see the following output of cfgadm -al:
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t1d0 disk connected configured unknown
c0::dsk/c0t3d0 disk connected configured unknown
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 CD-ROM connected configured unknown
glm0:scsi scsi-bus connected configured unknown
glm0:scsi::sgen14 tape connected configured unknown
glm0:scsi::sgen15 med-changer connected configured unknown
glm0:scsi::sgen16 unknown connected configured unknown
glm0:scsi::sgen17 unknown connected configured unknown
glm0:scsi::sgen18 unknown connected configured unknown
glm0:scsi::sgen19 unknown connected configured unknown
glm0:scsi::sgen20 unknown connected configured unknown
glm0:scsi::sgen28 tape connected configured unknown
glm0:scsi::sgen29 unknown connected configured unknown
glm0:scsi::sgen30 unknown connected configured unknown
glm0:scsi::sgen31 unknown connected configured unknown
glm0:scsi::sgen32 unknown connected configured unknown
glm0:scsi::sgen33 unknown connected configured unknown
glm0:scsi::sgen34 unknown connected configured unknown
glm0:scsi::st1 tape connected configured unknown
glm0:scsi::st2 tape connected configured unknown
glm1:scsi scsi-bus connected unconfigured unknown
usb0/1 unknown empty unconfigured ok
usb0/2 unknown empty unconfigured ok
usb1/1 unknown empty unconfigured ok
usb1/2 unknown empty unconfigured ok
The glm0 and glm1 are the SCSI busses. Now, my problem is to access the tape drives (in the autochanger) connected to that controller.
I cannot find out how to create mount points for those tape drives.
Any suggestions?
Cheers,
Sylwester

Did you do a boot -r?
That will do a 'devfsadm' which does all the /dev stuff for you.
Do you have the latest Recommended patch kit to make sure all your drivers are up to date?

If i backup my bookmarks locally, and restore them with a fresh install....does it also restore the LAYOUT of the bookmarks?

Ive been using the same install of firefox for years and its become very buggy. Im interested in completely uninstalling and re-installing firefox as refresh/resetting firefox doesnt fix the issues. If I restore from a locally saved backup, will it also save the exact location of the bookmarks? Meaning, will my favorites bar be saved AS IS, and also dropdown bookmarks saved in the EXACT same location? Ive become very used to it and would be nice to not have to manually take screenshots to have everything exactly as it was. Hopefully this makes sense. Thank you!

Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

I have 7.0.1 installed. Everytime I open something like Gmail or Google Plus, it says the version of Firefox is outdated and asks to upgrade to the new version. I uninstalled the whole thing and started with a fresh install and still the same problem.

Even this website thinks I have Firefox 3.2.

Your UserAgent string in Firefox is messed up by another program that you installed, it shows that you have Firefox 3.5.3.
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter <br />
''If you see the warning, you can confirm that you want to access that page.'' <br />
Filter = '''general.useragent.extra.firefox''' <br />
Right-click that preference and select '''Reset''' <br />
Then restart Firefox

Windows 7 Ultimate (64-Bit) fresh install, only WLAN and video driver installed but EXTREMELY slow internet connection...

I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
also with the WLAN connection. My ISP has checked their side and everything is fine.
To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
o/s to W7-Ult.
Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
Thanks in advance to all and for any advice.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
Steam or the like causing interference.
I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
my Asus machine.
<script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

Installing iLife '08 from Tiger discs on a fresh install of Snow Leopard

I just had a brand new hard drive installed on my imac. I am currently installing Snow Leopard as I type this post. I purchased the $35 SL disc as I have iLife '08 on my Tiger (10.4) discs. Before I install iLife I would like to know if I have to put disc 1 before disc 2 or just disc 2? Will I be able to just do a software update check and install to bring iLife '08 up to date with the SL? I realize that it won't be iLife '09 but I am concerned about '08 being compatible with a fresh install of SL.

Kat2007 wrote:
One more thing...I only have the microsoft office for mac 2004. If I install this, can I check for a software update that will bring me up to speed with Office?
Yes, check here...
http://www.microsoft.com/mac/downloads.mspx?pid=Mactopia_Office2004
Also, will the software updates (if I check and run a software update) happen for iLife '08?
Yes, they should.
-mj

Should I do a fresh install?

Hey guys, I purchased my unibody macbook (Intel core 2 duo 2.4 GHz, 4GB ram, 256 SSD, NVIDIA GeForce 9400M 256MB, running 10.7.2) in April of 2009 and have been using it exclusively ever since.
Recently, my computer has begun to slow down quite a bit. Safari hangs on websites, I receive the spinning rainbow more often, the computer shuts down randomly and won't turn back on for hours, etc. I brought the computer into the apple store (it's still covered by applecare until April of 2012), but all of the diagnostics tests came clean. Over the past few weeks, the computer has continued to slow down quite a bit, and I have noticed that my CPU is reaching levels that I haven't seen before. Currently I only have safari open with one tab, but my fans are running at 6000+ RPM and my CPU is peaking a bit over 90 degrees. I looked at my activity monitor and it seems as though the flash plug-in for safari was hogging my CPU usage. I uninstalled that, reinstalled, repaired disk permissions, and restarted my computer, but that hasn't seemed to help since I did it a few days ago.
I know that while my computer isn't exactly new, the processor in particular, I can't seem to feel as though it should be running more efficiently. I've used 159GB of space on my SSD, with around 60GB of that being music and photos.
My question is whether or not doing a fresh install of lion would possibly alleviate this issue. It might not be bad to do spring cleaning, but only if it will possibly help. If I do proceed with a fresh install, is there a way that I can back up just my documents (all on pages), music (all on itunes), and photos (all on iCloud)? I have plenty of time machine backups ranging from when I got the computer to now since I do it every week, but that would restore the computer entirely to those settings.
Suggestions?

ipodperson1 wrote:
I live in canada and dont want to start downloading it and have it go for 4 hours
Then wait a week or 2 before buying and downloading. Even then the servers may be overloaded. No one knows as it isn't tomorrow yet.
No matter where you are or when you download it, it is going to take some time. If it is the same size as the lion download that could be 40 minutes to several hours depending on your internet speed and the download server internet speed and how busy they are.

Netra 440 on Solaris 8?

Hello there...
We have our applications running on Netra 1400/1405 system on Solaris 8.
I have two questions in this regard
1) Now we plan to migrate to a better / robust system like Netra 440. But Netra 440 comes with Solaris 9 or 10 (not sure). So wondering whether we can customize Netra 440 with Solaris 8 (by asking SUN while ordering). Is it possible? If it is higher than version 8, development effort is required and we don't have that much time to do so now.
2) What is the major difference between Solaris 8, 9, 10? Directory structures changed? Libraries changed?
For 440, please refer
http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/Netra_440/spec
Please advice.
Thanks
Shiva Vaidyanathan.

svaidya wrote:
Hello there...
We have our applications running on Netra 1400/1405 system on Solaris 8.
I have two questions in this regard
1) Now we plan to migrate to a better / robust system like Netra 440. But Netra 440 comes with Solaris 9 or 10 (not sure). So wondering whether we can customize Netra 440 with Solaris 8 (by asking SUN while ordering). Is it possible? If it is higher than version 8, development effort is required and we don't have that much time to do so now. What would the development effort be for? Most code that runs on Solaris 8 should be able to run on Solaris 9 and 10 unmodified.
You can ask the System Handbook for OS support information:
http://sunsolve.sun.com/handbook_private/validateUser.do?target=Systems/Netra_440_R/Netra_440_R
That shows later versions of Solaris 8 are supported.
2) What is the major difference between Solaris 8, 9, 10? Directory structures changed? Libraries changed?UFS is compatible between all versions (but Solaris 10 adds support for ZFS). Libraries are always changed, but it depends on what you're doing as to whether or not that matters.
See also the "What's new in ..." sections of the docs for Solaris 9 and Solaris 10.
http://docs.sun.com/app/docs/doc/806-5202/6je7shk47
http://docs.sun.com/app/docs/doc/817-0547
For 440, please refer
http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/Netra_440/spec
That's the hardware specs page (which doesn't talk about required operating systems). The OS information is on the page before you clicked here.
Darren

How to get iPhoto back on a fresh install (not upgrade) of Mavericks?

I have a mid 2010 white unibody Macbook which came with Snow Leopard pre-installed and hence iPhoto. I recently upgraded to an SSD with a fresh install of Mavericks which does not come with iPhoto. As I originally had iPhoto, can I get a (free) copy of it for Mabericks?

wsaleem wrote:
I backed up my data on an external drive.
Great. If Time Machine, then enter Time Machine and Restore iPhoto, otherwise, copy Applications/iPhoto to your Mac

Netra t1 with solaris 9 fresh install on/standby switch

Similar Messages

Maybe you are looking for