NETSCAPE 7.1 did not work with 2.0 Object Browser

If I use Object browser I can select table, view, sequence...
but nothing is shown. I tested on htmldb.oracle.com
All works fine with IE, ...
Query Builder works with Netscape

Hi Lutz,
Netscape 7.2 or higher is required.
Joel

Similar Messages

Hello, I have iMac from Oct, 2010 and have OS 10.6.7 and multiple users. Mail icon was accidently removed along with program. Mail 4.4 is on other users but when I reloaded software my user got Mail 4.3. Mail 4.3 did not work with latest OS. Ideas?Matt

Hello, I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users.
About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user. Oops.
1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X.
2. I reloaded software from my user with original disks (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS. I am unable to load Mail. Gives Yellow error message.
" You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
Ideas?
MattDeeds

Matt,
I would download and run the 10.6.7 combo update.
http://support.apple.com/kb/DL1361
Regards,
Captfred

Recovery did not work with new hard drive

The original Toshiba HD(250G, sata1) of my laptop( ) crashed.
I bought new one (320G, sata 2, Western digit )
The problem is that, when I tried to use the recovery CD that I used to use it with old HD before, it did not work with this new HD well!?
After cd1 and cd2 finish installing it ask to take it out then restart, I do so, but when it comes to setup setting of windows.
An error message come out says " Windows Setup could not configure Windows on this computer’s hardware”
It restart and says again " Windows could not complete the installation. To install Windows on theis compuiter, restart the installation."
I have been trying to solve this a lot, but no way
I tried what in this link, but it drive me with another problem http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-could-not-complet...
I hope that I get the right thing to do, from ur forum by this post.
Thanks a lot

Did you folks search here for "advanced format drive"? People have had numerous weird problems with the new advanced format hard drives in older Toshibas. I can't look up all the threads for you. But here is one:
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-won-t-work-on-new-upgraded-hardri...

Why apple password did not work with my Ipod Touch

why my apple password did not work with my Ipod Touch?

Just where are you entering it?
What happens when you try?

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

C3 did not work with all the types of routers

Hi!
My problem is with the C3 (Hungarian 03.36 Vodafone), that the e-mail program is not working with all the wlan routers. My home router is Asus WL-520GC and with it I get communication error, but with a Linksys or a Tplink router everything is good. How can it be?
(I ve heard it from outhers too)
(both WPA2personal and DHCP)
I tried it with factory settings, but same problem: communication error.
Pls help!

Solved: I had to upgrade the firmware of the router.
It works

Update panel did not work with ajax control toolkits

hye there, can anybody helps me about the update panel. I have a grid view that must show the file that i already browser. in my situation i am using Ajax control toolkit so it automatically will upload the file in the grid view. Unfortunately it did not
work but the other code is work. this is my code
function clearContents() {
var AsyncFileUpload = $get("<%=MemoFileUpload.ClientID%>");
var AsyncFileUpload = $get("<%=AttorneyFileUplod.ClientID%>");
var AsyncFileUpload = $get("<%=TORFileUpload.ClientID%>");
var txts = AsyncFileUpload.getElementsByTagName("input");
for (var i = 0; i < txts.length; i++) {
if ((txts[i].type == "file") || (txts[i].type == 'text')) {
txts[i].value = "";
txts[i].style.backgroundColor = "transparent";
if (txts[i].type == 'text') {
txts[i].value = '';
function uploadComplete1(sender, args) {
clearContents();
__doPostBack("<%= HiddenButton.UniqueID %>", "");
function uploadComplete2(sender, args) {
clearContents();
__doPostBack("<%= HiddenButton2.UniqueID %>", "");
//the code that works
<td>
<%-- <asp:FileUpload
ID="MemoFileUpload" runat="server" Height="25px" Width="275px" />--%>
<asp:AsyncFileUpload
OnClientUploadComplete="uploadComplete1" runat="server" ID="MemoFileUpload"
Width="400px"
UploaderStyle="Modern" CompleteBackColor="White" UploadingBackColor="#CCFFFF"
ThrobberID="imgLoader"
OnUploadedComplete="btnMemoUplod_Click" OnClientUploadStarted="uploadStarted" />
<asp:Button runat="server"
ID="HiddenButton" Style="display: none;" />
<asp:Image ID="imgLoader"
runat="server" ImageUrl="../Images/loader.gif" /> 
 
<img id="imgDisplay"
alt="" src="" style="display: none" />
</td>
<td align="right">
<asp:Button ID="btnMemoUplod"
runat="server" Text="<%$ Resources: Section64OpenKPDetailedPRS.aspx,btnMemoUplod %>" Visible="false" />
<%--CssClass="ButtonStyle"--%>
</td>
<asp:UpdatePanel ID="update1"
runat="server" UpdateMode="Always">
<Triggers>
<asp:PostBackTrigger
ControlID="btnMemoUplod" />
<%--<asp:PostBackTrigger
ControlID="GridInspection" />--%>
<%--
<asp:AsyncPostBackTrigger ControlID="btnMemoUplod" EventName="Click" />--%>
</Triggers>
<ContentTemplate>
</ContentTemplate>
</asp:UpdatePanel>
</tr>
//the code that did not work
<td>
<%--<asp:FileUpload
ID="AttorneyFileUplod" runat="server" />--%>
<asp:AsyncFileUpload
OnClientUploadComplete="uploadComplete2" runat="server" ID="AttorneyFileUplod"
Width="400px"
UploaderStyle="Modern" CompleteBackColor="White" UploadingBackColor="#CCFFFF"
ThrobberID="imgLoader1"
OnUploadedComplete="btnAttrnyUpload_Click" OnClientUploadStarted="uploadStarted" />
<asp:Button
runat="server" ID="HiddenButton2" Style="display: none;" />
<asp:Image ID="imgLoader1"
runat="server" ImageUrl="../Images/loader.gif" />
</td>
<td align="right">
<asp:Button ID="btnAttrnyUpload"
runat="server" Text="<%$ Resources: Section64OpenKPDetailedPRS.aspx,btnAttrnyUpload %>" visible ="false" />
<%--CssClass="ButtonStyle"--%>
<asp:UpdatePanel
ID="Update2" runat="server" UpdateMode="Conditional">
<Triggers>
<asp:PostBackTrigger ControlID="btnAttrnyUpload" />
<%--<asp:PostBackTrigger ControlID="grdAttorny" />--%>
</Triggers>
<ContentTemplate>
</ContentTemplate>
</asp:UpdatePanel>
</td>
</tr>

Hi,
For ASP.NET problem, please post in ASP.NET forum!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks MSDN Community Support Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

E1200 - did not work with my computer

I tried to hook it up, called tech support and was on the phone with them for more than half an hour worked for a while then stopped. I gave up and sent it back Amazon.com was great to work with

Eventually Router should work... What was the exact concern that you were facing with the router ? How you were configuring the Router, was it with the help of the Cisco Connect Software or you were doing manual setup ?

Mouselistner is not working with jtable in the browser

Hi
I am having a problem with jTable.
I added a mouselistener to table header to sort table but when i run that applet from my netbean ide it works fine but when i run that applet in my browser it doesn't work, i have tested, its not even generate mouseclick event .Please help me guys.
I call this function after calling initComponents() method of JApplet.
public void setTableAction()
//set mouselistener to sort table on click of table header
final JTableHeader head= jTable1.getTableHeader();
head.addMouseListener(new java.awt.event.MouseAdapter()
public void mouseClicked(java.awt.event.MouseEvent evt)
Vector data= ((DefaultTableModel)jTable1.getModel ()).getDataVector();
sortTable(data, head.columnAtPoint(evt.getPoint()));
//set action map to change the default action performed for enter key pressed
InputMap imap = jTable1.getInputMap(JTable.WHEN_ANCESTOR_OF_FOCUSED_COMPONENT);
KeyStroke enterKey = KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0);
KeyStroke tabKey = KeyStroke.getKeyStroke(KeyEvent.VK_TAB, 0);
final Action oldAction= jTable1.getActionMap().get(imap.get(tabKey)); // get map to set enter key.
imap.put(enterKey, "enter"); // set enter key
Action newAction = new AbstractAction(){
public void actionPerformed(ActionEvent e) {
oldAction.actionPerformed(e);
JTable table= (JTable)e.getSource();
table.changeSelection(0,0,false,false);
if(table.isCellEditable(0,0))
String sTemp= (String)table.getValueAt(0,0);
if(sTemp.length()>0) {
if(bRenewItem)
retrieveRcodeDetails("",sTemp);
else
processRCodeDetails(sTemp, e);
}else
table.editCellAt(0,0);
jTable1.getActionMap().put("enter", newAction);
jTable1.setPreferredScrollableViewportSize(jTable1.getPreferredSize());
}

Hi,
I also am using the Bépo layout with an encrypted drive and encountered the same problem: the Return key does not work.
It seems to work fine if you use the fr-bepo-latin9 keymap.
# /etc/vconsole.conf
KEYMAP=fr-bepo-latin9
But I also looked at the files /usr/share/kbd/keymaps/i386/bepo/fr-bepo.map.gz and /usr/share/kbd/keymaps/i386/bepo/fr-bepo-latin9.map.gz (you can open gzipped files in vim directly). fr-bepo-latin9.map.gz defines keycode 28 (Return) but fr-bepo.map.gz does not.
I modified fr-bepo.map.gz:
# vim /usr/share/kbd/keymaps/i386/bepo/fr-bepo.map.gz # Append that line : "keycode 28 = Return".
# mkinitcpio -p linux # Rebuild the initramfs.
The Return key now works, but the Backspace (14, "Delete") and Shift (54) keys don’t work. I found that both the cf.map.gz (french canadian layout) and fr-bepo-latin9.map.gz files define those keycodes as well as other non-printing keys so I copied the following lines from fr-bepo-latin9.map.gz to fr-bepo.map.gz:
keycode 1 = Escape Escape
keycode 14 = Delete Delete
keycode 15 = Tab Tab
keycode 28 = Return
keycode 29 = Control
keycode 42 = Shift
keycode 54 = Shift
keycode 56 = Alt
keycode 58 = Caps_Lock
keycode 97 = Control
It works! Don’t forget to rebuild the initramfs after you change the keymap file.
# mkinitcpio -p linux
I will send a message to the kbd and bépo projects mailing lists and report back.

Re: SD reader - did not work with 8gb card

Hi, how can I read my Micro SD (with SD adapter) - (8gb SDHC), my PC didnt see this card. If I plug my 2gb micro SD is all ok. Is problem with SDHC? or capacity 8gb?)
Thanks
[email protected]

Hi
I dont know what notebook you have but did you check the user manual? There you can find a list what types of SD cards are supported.
Check this!!!
Some notebooks can only read SD cards but not SDHC cards.

Why Skype APPs did not work with 5.0, Why Skype APPs did not work with 5.0, Why Skype APPs did not work with 5.0

After I update my iPhone to with ups 5 Skype has no function anymore. What could be the problem?

It takes a while to get apps updated. Most of these developers do the same apps for other devices and it just takes a while. It's not an excuse, but just a reason.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Roaming profiles did not work with Novell client

I've Problems with roaming profiles.
It is perhaps not a Novell problem but anything with windows rights?
We use ZCM11: (Server: SLES11 SP1)
Client new PC with a freshly installed Windows7, all updates.
(Only Turn on file and printer sharing, anything else default, no virusscanner)
The pre-agent has been installed and then the the Novell Client 2SP1 IR7
The PC gets a "Dynamic Local User Policy" with the settings:
- Use the credentials of the user source
- (Manage existing user account - but we have none there)
- Volatile user (with no cache, meaning that the user is immediately deleted ... We have also tested with cache.)
- e-dir user should be only member of Users
The users from edir get a Roaming Profile Policy with:
- Store user profile in user's Home Directory. (which is on the OES/SLES server)
---- results ----
If the user has no centrally stored profile, then he can log on but just once!
(if "Enable Volatile User cache" also several times to the same PC)
If the user already has a stored profile, he can not log on Error: "The Group Policy client service failed the logon Access is denied"
In my view, the following happens. W7 create the user locally and want's put in the settings from a central profile in the local
Profile and can not do that.
Only when no "central profile" is there in the homedir, or if this profile does not contain the file ntuser.dat, the user can log in locally.
However, no files are used from te saved profile, for instance from the saved desktop.
I can not imagine that anyone around the world with ZCM11 on a SLES/OES Server don't use the Novell client and raoming profiles
It must therefore give a simple trick to solve the problem.
But which one? Can some one here help me?

Alix,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

I recently tried to burn some photos to a disc. It did not work, but then I ended up with a .fpbf folder on my desktop. Can't trash it, and when trying to burn again, I get this "... can't be burned because the original items can't be found". Help???

I recently tried to burn some photos on a CD. For some reason, It did not work. Now I have a .fpbf folder on my desktop. I can't seem to get rid of it. I tried dragging it to the trash, but then I get a box asking my to type my password it, so Finder can make the changes. Doing so, does nothing at all. And when I try to burn another CD from the same .fpbf file, I get a the following message: "There are 35 items that can’t be burned because the original items can’t be found. Skip the items and continue burning?". When I skip and continue burning, nothing shows up on the CD. In the meantime, the .fpbf folder is still in my desktop. I tried changing the aliases on each pic, but it still doesn't work. Any ideas of how I can remove this folder from my desktop?
Thank you.

Beavis2084,
Thank you for your detailed explanation but something is seriously wrong with my computer. Although the method you have described is very similar to the one I tried in step 2 from my second post, I have since "done things" which may have complicated matters—or suggests that my computer has a more serious problem.
Here's what I did:
1). Installed Onyx and discovered that I had a .plist file (com.apple.iphotomosaic.plist) that was causing a Syntax error: "Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header, if XML." After doing some research online, I was given the understanding that downloading the iLife update 9.0.3 (I installed the more recent version, 9.0.4) would solve this problem because it would also fix some system issues. So, I downloaded it...and when it didn't solve the problem, I decided to just deleted that .plist file.
2). I read your knew post and decided to follow your directions, even though I realized they were basically the same steps I followed in the 2nd method I mentioned earlier. I say "basically" because, for some reason, after inserting a blank disc, my computer does not open the disc in the Finder. Instead, it places the blank disc's image on the Desktop, even though the Finder's Preferences and the System's Preferences are set to have it open in the Finder—nothing should be on my Desktop! (Note: When transferring the items (all folders) I want to burn to the blank disc, I did not use the Option-Click-Drag method as before, I used the Click-Drag method, which created the curved arrow in the lower left corner of each item.)
Now, for the result of "method 2," the method we basically have in common, the computer goes through the burn stage but, in the verify stage, tells me that it is unable to verify the disk, suggests that my DVD may be unreliable and that I should try another disc, and then tells me about some "fork" (?) error (-43).
I don't know what to do anymore...

Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?

Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?

What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
MaggySimpson wrote:
Hi! I sold my Iphone on ebay.
Follow the instructions to remove a device you no longer have.
From here > http://support.apple.com/kb/PH13695?viewlocale=en_US

I moved from the UK to Sweden. My trial expired in the UK but I was not able to purchase CC in Sweden for some reason. I was told to create a new account in Sweden with a new Adobe ID. When I did, the trial downloads did not work and I could not purchase

I moved from the UK to Sweden. My trial expired in the UK but I was not able to purchase CC in Sweden for some reason. I was told to create a new account in Sweden with a new Adobe ID. When I did, the trial downloads did not work and I could not purchase the CC at discount price.

Moving this discussion to the Adobe Creative Cloud forum.
Kriskristferson if you are facing difficulties with your order then please contact our support team directly at Contact Customer Care.

NETSCAPE 7.1 did not work with 2.0 Object Browser

Similar Messages

Maybe you are looking for