Netstorage doubles up files when downloading a folder?
In Netstorage, when you download a folder, it zips the contents up and you
download a ZIP file.
Inside the ZIP we have all the files duplicated? It's doubling everything
up?
Anyone help?
Alan
Alan,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
The question pretty much says it all: the old versions of Firefox used to allow you to select "open" when downloading a file instead of saving it to a directory. I am fully aware that that's what selecting "open" does anyway, but I still like that option. Is it still available? That's one of my major irritations with Chrome, which I am considering switching from since Firefox 4 is faster.
You can do that with the OpenDownload² add-on - https://addons.mozilla.org/firefox/addon/opendownload-10902
-
I'm currently trying to update a few programs on my good old (VERY old) Mac Powerbook, but I ran into an error when downloading Firefox version 3.6...I'm currently running Mac OS X 10.3.9, which isn't compatible with the most recent versions of Firefox (or anything, for that matter), but it should still allow an upgrade of version 3.6; however, once the file finished downloading, an error message popped up indicating there's a corrupt image file. Is there any way to work around/correct this problem, or am I stuck with my old version of Firefox until I bite the bullet and upgrade my OS??? Any help is greatly appreciated!!
Firefox 3.6 requires at least OS X 10.4, the last version of Firefox that runs on OS X 10.3.9 is Firefox 2.0.0.20 available from https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
-
Changing the default destination file when downloading
when downloading the latest version of itunes i can't change the destination file, this is a problem as the file it is trying to download to no longer exists. i click install, but i can't click on any of my other files to change it :S and when i click change it tells me the file is unavailable then aborts instalation.
thanks in advanceI couldn't understand why this happening.
To make sure change you may see this change in deployment area.
Like <Appserver Install _dir>\appserv7\domains\domain1\server1\applications\j2ee-modules\<yourapplication name> directory
HTH -
.dmg files forced into .xls files when downloading applications
Why are dmg files being forced into xls files when I'm attempting to download applications from websites?
MacBook1,1 Mac OS X (10.4.8)Hi mospirit,
first of all: WELCOME TO THE DISCUSSIONS!
Sometimes files lose connection to their application. This can be solved quite easily though:
1. Download Cocktail, OnyX or Tiger Cache Cleaner and reset the "Launch Services Database".
2. Click any .dmg and type Apple-i to get the Information window. In the pop-up called "Open With" select "Other" and navigate to /System/Library/CoreServices. There select DiskImageMounter as default application. Finally back in the Information window click "Change All".
If this answered your question please consider granting some stars: Why reward points? -
Problems: Sorting files when downloading
I am having difficulty sorting my images into different folders when downloading with Lightroom.
Previously I used the Fuji finepix system when the downloaded thumbnails appeared I was able to direct selected images to different folders ie Shoot 1, Shoot 2, Shoot 3 etc. OR Scenes, Animals, Flowers etc , As yet I have not been able to figure out how to achieve this when using Lightroom3.
and
I can end up with hundreds of shots on a card and the sort by date is no use to me as I can have multiple shoots on the same day and usually resort to the old trick of shooting a "clapper board" at the start of each shoot and import each shoot seperately. This system is quite time consuming and gets even more complicated when I'm shooting socially and the images in each category are scattered randomly throughout the card.To complicate matters I shoot soetimes in Raw, sometimes in jpg
Ideally I would like to view large previews and then drag & drop selected ones to the relevant folders. Right click and Send To/Copy To seems a bit slow though,
Can anyone suggest a work system to suit my requirements?I would forget about the physical storage (i.e. let LR use its default folders), and concentrate on using keywords to organise your photos instead.
-
Hi. The only save options for a full html type file on Firefox is as "web page, complete" and as I say when saving with Firefox the program is saving the usual yellow folder with links and artwork files etc, but is saving 2 copies of the HTML file where on of these files is empty, won't open and gets locked to the destination it was saved to. This empty file can't be moved, and can't be deleted. When this is attempted it gives message "cannot delete (or "move" if this is the case) : Cannot read from the source file or disc."
To overcome this I now use Internet Explorer, dut prefer not to. I have also deleted Firefox from my system and re-installed it, but this did not help. How can I stop this doubling of saved files? and how can I delete the ones that are now fixed to my desktop? can you lease help?You said, ''Would like to sort this one out...any clues?''
Maybe something here will help:
*http://en.wikipedia.org/wiki/MHTML
*http://en.wikipedia.org/wiki/Mozilla_Archive_Format
*http://maf.mozdev.org/
*http://maf.mozdev.org/documentation.html -
How can I get firefox to highlight downloaded file when opening containing folder in linux mint 13
When I use open containing folder to locate the download, the file is not highlighted which, given the size of my downloads folder, makes it a chore to locate the file (especially when you've forgotten what it's named).
The file manager I'm using is nemo.
I can manually run nemo with the full path to the file as the second parameter via the command line and it will highlight the file.
Is there a config option somewhere that I can change to pass in the full file path and not just the containing folder path?I have the exact same problem.
The source of the problem is that on Linux there is no single file manager.
I tried to determine if firefox uses xdg-open or some other technique by searching the source but have not found it yet.
If the proper call is used, for most file explorers this function can be realised.
If xdg-open is used, it should be patched, which I also tried and has not yielded results yet.
What would help me pick this up further is the answer to the question: what does firefox use to open the file in the download manager? -
I received an email from my server trying to help me upgrade my thomson router, they sent me a file and said unzip it and open the "setup.exe" but when I clicked on the said folder i received a pop up saying : I cant open the app. because Microsoft Windows applications are not supported on OS.X
Any help out there? Incidentally until I can open this file, I cannot follow the upgrade nstructions received on another download.I do not believe you can open and run .exe files in Parallels. Parallels is simply a vehicle for running Windows on a Mac.
To open and run an .exe file, you need to have a valid copy of Windows, which you can install on your Mac in Parallels or BootCamp. Only when running Windows will you be able to open the .exe file and update your router.
I wouldn't worry about Microsoft Office, I think an earlier poster got the impression that you were trying to run Microsoft office, but I don't think you ever mentioned such a thing. -
When I download pdf files using Safari 6, they can't be read by Adobe Reader; using Safari to read them isn't a solution, because Safari doesn't allow them to be printed page by page. The same files, downloaded by Chrome, by contrast, can be opened and printed. Is there a patch for this problem?
Eliot Hudson wrote:
I receive a message that:
"Adobe Reader could not open [form name.pdf] because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."
Go to: Mac HD/Library/Internet Plug-ins
Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files
Trash the Adobe Reader app from your Applications folder.
Empty the trash.
Go to: http://get.adobe.com/reader/enterprise/ and download the FULL installer to replace Reader and the plug-ins.
Redownload the Forms. -
Error 'Unable to open file' when downloading SAP Query to Excel
Hi all
I'm running a SAP Query which is set to download straight to a spreadsheet (Pivot Table / Microsoft Excel). Intermittently it does not work - apparently at random (at least, I've can't recreate the error at will).
It does one of the following:
- Works ok, and creates the pivot table
- Gives an Excel error message 'Unable to open file', then returns to the 'save the data in a spreadsheet' popup when enter is pressed on the error.
- Does not issue error message, just goes to the 'save the data in a spreadsheet' popup.
In the last two cases, the excel pivot table sheet is not created.
Has anyone seen anything similar, or have any idea as to what is causing the problem?
Any help gratefully received!
Not urgent as I've found a way round - further testing seems to show that I don't get the error is Excel is already open - but in the past I've run many SAP query downloads without needing to open Excel first. I suppose it's possible that this is just something to do with the Excel setup at the user site
Message was edited by:
E GregoryHi,
Ensure that file name with same name and in same path should not be open while saving the data.
Award if it helps.
Jogdand M B -
How to get Formatted Excel file when downloading spool request of a r paint
I have scheduled a Report painter program in background & spool is generated .
When I download the output in the Excel file its not in the proper format . We need to format the file file by adding deleting blank Line in the report .
Can it be possible when we Download the Report painter. Its come The generated Excel file should come in formatted way.
Thankskiro123 wrote:
I have scheduled a Report painter program in background & spool is generated .
>
> When I download the output in the Excel file its not in the proper format . We need to format the file file by adding deleting blank Line in the report .
>
> Can it be possible when we Download the Report painter. Its come The generated Excel file should come in formatted way.
>
>
> Thanks
Yes the report painter report especially in the hierarchial format will not make much sense when you download to excel. Until now I also have not seen any solution to this. -
Finder not showing files when I open folder
A folder on my external hard drive which I was just editing/ doing some file organization with,
contains 60gb of data.
Lots of files and folders in it.
For no apparent reason,
it is now showing nothing in it when I open it,
Still says size is 60gb, but when I open it, the files do not show.
What is going on?
I need to work on these files.
If you can help me with this, it would a huge help.
Thank you.
ps. in Mountain Lion 10.8.2, late 2011 macbook pro.[Please note, the plugin I mention is NOT a finder substitute. It is a plugin, and merely gives the finder tabs.
If I disable this plugin, the result is the same in the "original" finder. Although when I say "original" I was using finder all along anyway.]
I shouldn't have mentioned it, it is superfluous info.
I dragged and dropped files using finder, that's all that needed to be said really.
It would obviously make no sense to ask questions about finder if I was not using finder.
Okay, I have to say, this is incredibly strange :
After comparing the two separate drives,
it seems I DID actually move the files to another folder [and forgot / was unsure of this],
however, the info box still says the original folder I mention is 60gb, with one file [which does not appear when I open it]
and finder is not displaying the increase in size in the folder [I'll call it folder 2] I moved the files to.
I wonder if I delete the original folder, are the sub-folders I moved to folder no.2 going to be deleted?
Are they still somehow connected to the original folder?
I was moving things around to try and merge all my files and folders into one folder [folder no.2] -
Didnt Find Acrobat SDK 9.1 Installer or setup file when Downloaded Acrobat SDK 9.1
Hi I have downloaded Acorbat SDK 9.1 from the following link http://www.adobe.com/devnet/acrobat/?view=downloads.
I got the "sdk91_v2_win.zip" file . When i extracted files i didint find any setup or installer All it contains is "ActionScriptReport , Documentation, IntAppCommunicationSupport,Javascriptsupport,NonAdobeSupport,OtherSup port,PluginSupport" folders. I have attached the image below.
Regards
SantoshThere is a setup.exe in Adobe\Acrobat 9 SDK\Version1\PluginSupport\Tools\Visual Studio App Wizard
-
Automator/Applescript to Rename files when dropped in folder based on parent folder name
When a file is dropped in a folder ( ParentFolder/Folder/File.pdf )
I want to rename the file to ParentFolder_Folder_01.pdf
--Get folder
--Get ParentFolder
--Check for next available number and use it.
If ParentFolder_Folder_01.pdf exists, try _02
I automator, I have chosen folder action
Added 'Get selected finder items'
I have attempted to modify another sript I found here to no avail.
on run {input, parameters}
tell application "Finder"
set theFolder to input as string
set theNameOfFolder to name of folder theFolder
set theFiles to every file in folder theFolder
set theFolders to every folder in folder theFolder
my ProcessFiles(theNameOfFolder, theFiles)
my ProcessFolders(theFolders)
end tell
end run
to ProcessFolders(theFolders)
tell application "Finder"
repeat with thisFolder in theFolders
set theNameOfFolder to name of thisFolder
set theFiles to every file in thisFolder
set theFolders to every folder in thisFolder
my ProcessFiles(theNameOfFolder, theFiles)
my ProcessFolders(thisFolder)
end repeat
end tell
end ProcessFolders
to ProcessFiles(NameOfOuterFolder, theFiles)
tell application "Finder"
repeat with thisFile in theFiles
set theSuffix to my grabSuffixOfFile(name of thisFile)
set name of thisFile to NameOfOuterFolder & "_" & theSuffix
end repeat
end tell
end ProcessFiles
to grabSuffixOfFile(theFile)
set text item delimiters to "_"
return (text item 2 of theFile)
set text item delimiters to ""
end grabSuffixOfFileNormally it is a bad idea to do things with items that are in the attached folder (earlier OS versions will retrigger folder actions when an item is renamed, for example), and you don't need to use a Get Selected Finder Items action since the dropped items are already passed to your workflow (also note that the input items will be a list).
It looks like you are trying to use multiple passes to add on the folder names, but you will have less of a headache if you build the base name and just deal with the number suffix. If I understood your naming scheme correctly, the following script should do the trick - it isn't very fast, but should be OK for a few items at a time.
on run {input, parameters} -- rename input Finder items (aliases) to name of containing folders
set divider to "_" -- the divider character between name pieces
set output to {} -- the result to pass on to the next action
set counter to "01" -- start suffix at one
repeat with anItem in the input -- step through each item in the input
set anItem to contents of anItem -- dereference
tell application "Finder" to if class of item anItem is document file then -- don't mess with folders or applications
set {itemParent, itemExtension} to {container, name extension} of anItem
if itemExtension is not "" then set itemExtension to "." & itemExtension
set grandParentName to name of container of itemParent
set parentName to name of itemParent
set newName to grandParentName & divider & parentName & divider & counter
set documentNames to my getExistingNames(itemParent)
repeat while newName is in documentNames -- increment counter suffix as needed
set counter to text -2 thru -1 of ("0" & (counter + 1))
set newName to grandParentName & divider & parentName & divider & counter
end repeat
set name of anItem to (newName & itemExtension)
set end of output to anItem -- alias still refers to the same file even after renaming
end if
end repeat
return the output
end run
to getExistingNames(someFolder) -- get base document names (no extensions) from a folder
set nameList to {}
tell application "Finder" to repeat with aFile in (get document files of someFolder)
set {fileName, fileExtension} to {name, name extension} of aFile
if fileExtension is not "" then set fileExtension to "." & fileExtension
set fileName to text 1 thru -((count fileExtension) + 1) of fileName -- just the name part
set end of nameList to fileName
end repeat
return nameList
end getExistingNames
Maybe you are looking for
-
ACR 7.1 RC Issue Not Fixed in ACR 7.1
The issue I identified in ACR 7.1RC is not fixed in the production release of ACR 7.1. Maybe I did not explain this in enough detail, it's very easy to miss. 1. Select a RAW file that was previously adjusted using PV2010. When you open the file wi
-
When I try and open firefox -either from the start menu or desktop shortcut -it doesn't open unless I open another program first. Eg I click firefox and then say 'word' and then 'word' will open followed by firefox- not only is it a bit irritating bu
-
Is there a way to load music to my ipod from purchases from Realplayer, etc
Hi. Let me start off by saying I am a computer idiot. It took me 20 minutes to figure out how/where to post my question. I apologize if I ended up posting in the wrong place and I apologize in advance for my babble. Here is my question(s). I have a I
-
Suggestions for all in one wireless printer to work with iMac
I am looking for a new all in one that will work with my iMac & Airport
-
Hi - I am trying to work out how to import a text subtitle file for use with DVD Studio Pro 4. I've been reading the manual and, from Page 456 it gave this example: $FontName = Arial $FontSize = 65 //The following subtitles are for scene one. 00:00:1