Netstream.send() privacy settings
I'm using Netstream.send() to transfer a file between two users.
A previous discussion can be found here:
http://forums.adobe.com/thread/890122?tstart=0
It works well except of flash settings issue.
When trying to access a camera or mic the Flash ask the user for permissions automatically.
When trying to send a file, the Flash player doesn't show the privacy popup.
If the user doesn't set his privacy to Allow, the file transfer fails.
There are two issues:
1. The privacy settings popup isn't shown automatically.
2. The privacy popup ask permissions to access the camera and mic and doesn't say anything about data transfer.
Am I missing something or are the above real issues?
Thanks
the P2P access dialog will only show when using RTMFP Groups (NetGroup or a group NetStream). if you're just doing NetStream.send() on a 1-to-1 (NetStream.DIRECT_CONNECTIONS and new NetStream(netConnection, peerID)) P2P connection, then there is no P2P access dialog.
if you're doing groups and the P2P access dialog isn't showing up, there are a few possible causes:
1) for some reason you at one point selected "Deny" *and* checked "Remember"; in that case, Flash Player won't present the dialog and will behave as though you clicked "Deny"
2) Flash Player's window or region in the browser page is too small for the P2P access dialog. if the P2P access dialog can't be presented because the window is too small, it will behave as though you clicked "Deny"
3) there is a known bug in Flash Player when using wmode=direct (which you would use for Stage Video) where, when you set wmode=direct, the P2P access dialog won't be displayed, and the behavior will be as though you clicked "Deny". this issue will be fixed in a future release of Flash Player. to work around this, set wmode to a different value.
Similar Messages
-
I recently sent an email to a friend, who is NOT a Facebook friend, who has a yahoo email account, and my Facebook profile picture appeared next to the email. My privacy settings on FB only allow FB friends to see my photo. Why is another yahoo account that is not a FB friend seeing my profile photo and is there a Yahoo privacy setting that will eliminate this from happening? Thank you.
== This happened ==
Just once or twice
== this weekDid you check that your Facebook settings haven't changed?
Facebook may have changed them as part of a software update.
Is there a link in that email (signature) with a link to that picture?
Try to send an email to yourself. -
Privacy Settings: "Ask websites not to track me"
When you select the "Ask websites not to track me" in the privacy settings of Safari, it states, "Select to ask sites, particularly third parties (including advertisers), not to track you. Some third parties keep track of your browsing activities when they serve you content, which enables them to tailor what they present to you. If this option is selected, each time Safari fetches content from a website, Safari adds a request not to track you."
Does anyone know how this "Safari adds a request not to track you" work? Doesn't it send info about you anyways by having to enabling this feature? -Do sites have to comply? (Is there law that business have to comply by -if one wants to opt out of being "tracked?")
Is there anyway to test if this actually works?
Thanks.Thanks for the link. Informative. I figured it was fairly new. I hope there's more info out there that would explain it more in detail. For example what info, if any, is my Mac sending requests not to track me on their sites. -And what services would sites need to be running, and if they would have to adhere to any law to comply with such a request.
-
hi
i have set my privacy settings to receive IMs from my contact list only BUT WHY AM STILL RECEIVING CONTACT REQUESTS FROM MORONS!!!!
help help helpcontact requests are not considered as IMs. Block those users who are sending you unwanted contact requests, and you can also report them to [email protected]
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES -
Facebook Privacy Settings Lumia 800
Since last week, all messages posted from my Lumia 800 to Facebook have been posted with the 'Only Me' privacy setting. Previously I was able to post no problem with the Privacy set as 'Public'.
As far as I can see there are no options on the phone for privacy settings, and others that I know using Lumia phones have no problems sending messages to Facebook.
Does anyone know what could be causing this, and what the solution would be. I am posting messages from the 'Me Tile' and not from a Facebook app, though if I post from a Facebook app I have the same problem.
Thanks to anyone who can helpHI ronnikke,
Welcome to Nokia Forum!
I have encountered this one wherein all my post created under Hotmail are set to "Only Me". You can try to check these settings and see if it will make any difference:
Go to Hotmail>Sign in your account>Under Messenger Social>Click on Add>Manage services
You will have a list of linked accounts to your Microsoft account. Under Facebook, click on Edit and put a check mark to "Share to Facebook". -
Cannot save Basic privacy settings
Hi,
I'm trying to save "Only allow people in my Contact list to contact me" under the Basic options in the Privacy options. When I press save and return to check that that choice has been retained the setting is back to "Allow anyone to contact me". Meanwhile in the Advanced options similar choices save without any problem. However, I continue to receive notices from unknown people wanting to become contacts.
I have tried one solution of signing out for 5 seconds and then signing back in, but this didn't work.
I use W7 x64 and Skype 6.10.0.104. on 2 PCs and I have an Android device running skype too, a Samsung Galaxy S3 and occasionally a Samsung Galaxy Note.
Your help is much appreciated,There are no Privacy settings that can prevent people from sending new contact invitations to you. Privacy settings have only effect on chat messages and calls, but not on new contact invitations.
-
Issue: Non-contacts are able to send me an IM when they are not on my contacts list.
On my other account, "Only allow people in my Contacts list to contact me" is selected, but I have recieved their IM "are you online?" from two different people who are not on my contact list. I have blocked and reported scam for both of these people.
The privacy settings appear to be malfunctioning.
P.S. I do not post with my main account where this issue is occuring because I wish to be unsearchable as much as possible.I have the same problem and it is obnoxious.
-
Every time I try to send a text message on iChat, I get the AIM error message: "Your privacy preferences are set so they prevent you from communicating with this person." Ive gone into my preferences and tried to change my privacy settings, but the allow anyone is checked, and none of my buddies are actually blocked. My whole buddy list is like this, not letting me see if people are online and blocking every message. How can I fix this?
Hi,
First try changing the setting in the Security tab.
If that does not work Open you Home Folder/Library/Preferences and delete com.apple.ichat.AIM.plist and restart iChat.
11:36 PM Thursday; February 26, 2009 -
I changed the privacy settings on Firefox preferences, including clearing cookies, history and cache, and now Firefox will not open at all. It said it had to restart after one of the privacy changes, but it didn't and now won't open by the dock icon or thru applications. What happened, and how can I correct the issue to start using Firefox again? Thanks.
Hello,
Try start in Safe Mode:
*[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in safe mode]
Also see this article:
*[https://support.mozilla.org/en-US/kb/firefox-does-not-work-common-fixes Firefox does not work - Common fixes to get you back up and running] -
Question
WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp
-
I have a new iPhone 5. I am trying to get apps like instagram, facebook etc to upload pictures from my camera roll. When i try to get a picture from the camera roll it instructs me to go to settings - privacy - photos and turn access on. When I do this, there is no option to turn it on. All i get is a screen saying "apps that have requested access to your photos will appear here". NO APPS APPEAR HERE. When I go to instagram I get the message "this app does not have access to your photos. You can enable access in Privacy Settings." I CAN'T enable it in Privacy Settings. I tried deleting the app and reinstalling it and it didnt work. Please help! Much appreciated.
I'm also on iPhone 4, iOS 6, and have exactly the same problem. I've tried resetting privacy settings, turning restrictions on and off, deleting and reinstalling apps. Nothing seems to work. The lists of apps in privacy settings are all empty, except for location services. When using Tweetbot the app is regularly asking for permission to access my twitter account, but even when I allow that, the app doesn't show in privacy settings. When I try to go into the camera roll from the Facebook app, the app tells me I have to allow access to the camera roll from the privacy settings - which I can't do since the app is not listed there.
-
What are the correct Send Connectors settings in Exchange 2013
Hi
I'm new to exchange, successfully setup a lab with 2 cashub roles and 2 mailbox roles. I am trying to set the send connectors settings, because I've not been able to send nor receive external email via owa. Since I'm separating the exchange roles, my mailbox
servers only use internal IP settings and cannot resolve external DNS. I'm thinking I need to tick, proxy through CAS for it to work? any suggestions?Hi
Can you please let us know what version of Exchange that you are using
"I'm new to exchange, successfully setup a lab with 2 cashub roles and 2 mailbox roles"
- Because Exchange 2013 does not hold hub role.
" I am trying to set the send connectors settings, because I've not been able to send
nor receive external email via owa."
It would be great if you could answer few questions so that people can help you out here
Are you able to send emails internally without any issues with Outlook ? If not can you paste the errors.
What error you are getting while trying to send emails through owa . Can you paste the errors.
If you are looking for steps to create new send connector please follow below technet article
http://technet.microsoft.com/en-us/library/aa998936(v=exchg.150).aspxFeel free to post your comments/errors you received to proceed
further
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
Privacy settings not working for me
Hi, I'm Jan and this is more or less my rage.
I THOUGHT Skype had privacy settings, cause I wanted to change some today and I went to check profile settings on my desktop software and show full profile and suddenly at the right edge I see the bane of my existance when privacy is considered. ALMOST EVERYTHING IS GREYED OUT AND SET TO PUBLIC! ARE YOU FREAKING MENTAL?! I'd like most of my info set to contacts only, thankyouverymuch. SO WHAT?! If I want to hide who I am until I am certain I want to tell somebody that information, I should commit identity fraud and FAKE ALL OF MY INFO?! WHY WOULD YOU EVEN CONSIDER DOING IT?! IS OUR PRIVACY WORTH ANYTHING TO US?! I realize that Skype has been through the gutter since it got bought out by Microsoft, but really? You can't manage not showing certain information? EVEN FACEBOOK WHO OWNS ALL THE INFO I PUT ON THERE HAS A "HIDE YOUR INFORMATION TO NON-FRIENDS" SETTING!!! I have a feeling I'll be searching for a new IM and net-calling provider soon, if this doesn't get fixed...
To be honest, I've been patient with every crash, every freeze, every update that looked more hideous than the previous, but this is the last straw.Thanks for reply. Have done this already. Been spending 48 hours solving all the hardware issues that iOS 7 has caused. I have hardware issues that I never had before update. Had my beef with apple customer service that resulted in Apple being very keen on charging me £200+ for fixing iPad or advising me to buy anew iPad.
Result is that microphone is dead since update after resetting to factory setting 3 times!
Xmas will buy a nexus or samsung, fed up with the bad customer service, the poor software updates, 2 years for a £500 iPad is a bad return on money.
Apple take note! -
Title
NetStream.send not working in Flash Player 11.2 Beta with Cirrus, Please confirm if it is a bug or feature
Description
Problem Description:
NetStream.send can not send data to peerstreams when using with cirrus. Conflict with documents.
Sorry for tag the build as 11.0.1.3 while the bug is actually on 11.2 beta since the bug report system didn't have 11.2 beta yet.
If you are not responsible for 11.2 beta bug fix, please help a hand to handle this bug to 11.2 team.
This bug is "killing" to your application, so we really appreciate your help. Thanks.
==Publisher==
nc.connect("rtmfp://");
var ns:NetStream = new NetStream(nc, NetStream.DIRECT_CONNECTIONS);
ns.publish("sendtest");
...//after connection success.
ns.send("clientfunction", "ok"); // this line cannot reach subscribers. even if subscribers have client object correctly.
==Subscriber==
nc.connect("rtmfp://");
var ns:NetStream = new NetStream(nc, cirrusid);
var client:Object = new Object();
client.clientfunction = clientfunction; // target function
ns.client = client;
ns.play("sendtest");
Steps to Reproduce:
1. compile the code in the attachment to SendTestExample.swf (not be able to paste it here)
2. run it under flash player 11.2.202.19 beta
3. run it under flash player 11
Actual Result:
HeartBeat is:
Start HeartBeat:
send hello
send hello
send hello
which means NetStream.send was not able to call "clientfunction" as expected.
Expected Result:
Start HeartBeat:
send hello
in client function: hello
send hello
in client function: hello
send hello
in client function: hello
which can call into the clientfunction as flash player 11 did.
Any Workarounds:
I can not find it out since it's an api level bug. But this can be very important for lots of applications which rely on send to do rpc.
Test Configuration
IE8, Firefox under Windows 7
Also have problem under Windows XP (but not well tested on this platform)
App Language(s)
ALL
OS Language(s)
ALL
Platform(s)
Windows 7
Browser(s)
Internet Explorer 8.0
==Attachment==
package {
import flash.display.Sprite;
import flash.events.Event;
import flash.events.NetStatusEvent;
import flash.events.TimerEvent;
import flash.media.Video;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.text.TextField;
import flash.utils.Timer;
import flash.utils.setTimeout;
public class SendTestExample extends Sprite
public static var statusArea:TextField;
var ncServer:NetConnection = new NetConnection();
var nsServer:NetStream;
var ncClient:NetConnection = new NetConnection();
var nsClient:NetStream;
var timer:Timer = new Timer(1000);
public function SendTestExample() {
ncServer.addEventListener("netStatus", onNCStatusServer);
ncServer.connect("rtmfp://p2p.rtmfp.net","99f72ccbed0948d7589dc38a-3ce1b2616680");
statusArea = new TextField();
status("status");
statusArea.x = 0;
statusArea.y = 0;
statusArea.border = true;
statusArea.width = 200;
statusArea.height = 350;
addChild(statusArea);
function onNCStatusServer(event:NetStatusEvent):void {
status("Step 1:");
status("server: " + event.info.code);
status("id: " + ncServer.nearID);
switch (event.info.code) {
case "NetConnection.Connect.Success":
nsServer = new NetStream(ncServer, NetStream.DIRECT_CONNECTIONS);
nsServer.addEventListener(NetStatusEvent.NET_STATUS, onNSStatusServer);
nsServer.publish("sendtest");
ncServer.removeEventListener(NetStatusEvent.NET_STATUS, onNCStatusServer);
ncClient.connect("rtmfp://p2p.rtmfp.net","99f72ccbed0948d7589dc38a-3ce1b2616680");
ncClient.addEventListener("netStatus", onNCStatusClient);
case "NetStream.Publish.BadName":
//status("Please check the name of the publishing stream" );
break;
function onNCStatusClient(event:NetStatusEvent):void {
status("Step 2:");
status("client: " + event.info.code);
status("id: " + ncClient.nearID);
switch (event.info.code) {
case "NetConnection.Connect.Success":
nsClient = new NetStream(ncClient, ncServer.nearID);
var c:Object = new Object();
c["clientfunction"] = clientfunction;
nsClient.client = c;
nsClient.play("sendtest");
ncClient.removeEventListener(NetStatusEvent.NET_STATUS, onNCStatusClient);
//setTimeout(sendHello, 5000);
case "NetStream.Publish.BadName":
//status("Please check the name of the publishing stream" );
break;
protected function onNSStatusServer(event:NetStatusEvent):void {
status("nsserver: " + event.info.code);
if (event.info.code == "NetStream.Play.Start") {
status("Start HeartBeat:");
this.timer.addEventListener(TimerEvent.TIMER, function (e:Event):void {
sendHello();
this.timer.start();
protected function sendHello():void {
status("send hello");
nsServer.send("clientfunction", "hello");
protected function status(msg:String):void
statusArea.appendText(msg + "\n");
trace("ScriptDebug: " + msg);
protected function clientfunction(event:Object):void {
status("in client function: " + event);Thanks for reporting. I can reproduce the bug in house. We will investigate.
Calise -
I'm trying to confirm private browsing is working. Right now I have no way of knowing if it is on or not. The purple mask ,referred to in help, does not appear when selected. I should say in my privacy settings, I have selected "Never Remember" for history.
Do you mean you have checked the box: "Always use private browsing mode"? If so, it's intentional that the private browsing icon isn't displayed as we didn't want Firefox to be showing everyone within view that you're using private browsing mode IIRC.
There are some easy things you can do to confirm that you are in private browsing mode such as visiting a new website and then confirming it doesn't appear in the history window.
Maybe you are looking for
-
Failed import from iPhoto to Aperture - what's the best solution?
Hello After some years of using iPhoto I recently upgraded to Aperture 3.2.2. In connection with that and before opening Aperture, I bought a new external hard drive and moved my iPhoto library to it, following Apple's instructions on how to move an
-
Working problem in 9.21
Hi, I've made a very simple test in OATS 9.21. This test process repeats only 2 steps at 20 times and stop. (It is a recorded test.) These steps are very simple too: write a word into a textfield and click a "search" button -> search the word from a
-
I tried to download Photoshop CS6, but when I tried to open it said "The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll." I dont know what to do HELP PLEASE!
-
Accidentally deleted an app I downloaded and I want it back-
I accidentally deleted my Lion download from the "Purchased" tab in App Store. Is there any way I can put it back in there? Help.
-
Anyone seeing horizontal-scroll-mode issues with Terminal.app?
This is more a broadcast of findings than a question, but: Related to things here (that is closed/archived): https://discussions.apple.com/message/10061606#10061606 It looks like the version supported locally of bash/readline are working for Terminal