Netware 6.5SP7 and vsphere 4.1 - the right LAN Driver ?

Hello,
i've 4 Netware 6.5 SP7 server on VMWare ESX ( vsphere 4.1 ) running. The servers runs well and stable, but the lan performance isn't so good. I've configured a E1000 as LAN driver, also i've tested some othe drivers, for example PCNTNW... Can anyone tell me the best lan driver for netware6.5 with vmware running ?
Thanks and regards,
Norbert

Norbert,
> i've 4 Netware 6.5 SP7 server on VMWare ESX ( vsphere 4.1 ) running.
> The servers runs well and stable, but the lan performance isn't so good.
> I've configured a E1000 as LAN driver, also i've tested some othe
> drivers, for example PCNTNW... Can anyone tell me the best lan driver
> for netware6.5 with vmware running ?
I've always found the E1000 to be the best.
For NetWare in a VM, make sure you set a memory reservation (VM Settings
-> Resources -> Memory) equal to the amount of memory assigned to the VM
- It can make a BIG difference.
H.

Similar Messages

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

How can I get a search bar added to my email archives screen to make it easier to search for the right archives folder, Samsung has one so I was surprised to see that I have to scroll up and down to find the right folder?

How can I get a search bar added to my email archives screen to make it easier to search for the right archives folder, Samsung has one so I was surprised to see that I have to scroll up and down to find the right folder?

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can modify the pref keyword.URL on the about:config page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit. Does anyone know how to fix this problem?

I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit. Does anyone know how to fix this problem?

Hi alexanderfrommilton,
First try reinstalling itunes.

Selecting and moving clips to the right of the TCI

Is there a way to be able to move the editted clips that are to the right of my current TCI, and keep the edits as they are?
I'm looking for a ripple delete with more control if that makes sense. My old editting software had a group tool which alowed me to make a cut and move every edit to the right, to exactly where I wanted to move them. I tried using the track select, but it only works on the track I drag, even if I select more than one track.

I'm not sure what the tool is called--I call it the "A-Tool" because you hit "A" to get it to come up. Anyway, hit "A" on your keyboard and shift+click on the left-most clip that you want to move, and it will select that clip and all clips to the right of it, on all tracks. Then you can move them over. If you don't shift+click, but just click, it will select only the clips on the single track.

Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

Hi, I need a video editing software for my Power Mac G5 system. Hunted all over for one! Can anyone help me and point me in the right direction. Everything I come across is for intel based systems. Many thanks in advance.

I have Final Cut Studio V1 - the PPC/Intel V5/5.1 cross-grade version, which would suit your requirements perfectly. (I have it for sale at present down here).
If you keep looking, you're sure to find a similar second hand copy in your area, without the need to upgrade your graphics card.
I'd go for Final Cut Pro as above over any version of Express. FCP has the full version of LiveType - not the truncated version that was released later on.

Position of the days and dates being on the right side of the day in the week calendar.

I'm having a huge problem with the days and dates being on the right side of the day in the week calendar. Can I change that to the left upper side?
it makes the whole schedule off balance you see.

Thanks for stating that. So quickly. That *****. I also now see that more people have problems with this. Where can I complain?

Why is the quality of movies and pictures exported to the external hard drive lowered?

Why is the quality of movies and pictures exported to the external hard drive lowered?

Are you speaking of manually moving these files, or using an application to export?
When you use the the term "export", it usually entails an application performing some kind of file conversion, rather than a simple transfer. It is during conversion to another file format that information may be lost through lossy compression, or by settings of the export.
Anytime you convert a file to another format, there will usually be some loss or degradation. Tghis can't be helped, as one format may not support every information characteristic the original one did.

My dad can't remember his iCloud password, and doesn't have the right answers to his security questions. Any other ways to reset a password?

My dad can't remember his iCloud password, and doesn't have the right answers to his security questions. Any other ways to reset a password?

Open > http://iforgot.apple.com and choose Email authentication

Missing "File Renaming" and "Destination" areas on the right side of the "Import, Library" module

Not sure why this is happening. I have uninstalled and installed LR3 three times on my Dell Laptop Running WIN 7. I have 8 gb RAM and a 750 gig HD. The processor is an Intel Core i5. According to the requirements, I should have enough hardware to run LR3. I have installed the updates so that I am running LR 3.6. For some reason, I am unable to locate the "File Renaming" and "Destination" sections on the right hand column. The "File Handling" and "Apply During Import" are visible. I have registered the program with Adobe, and believe that I have all of the current updates. The program loaded in the 64 bit mode.
Has anyone run into this problem before?
I have been unable to get the program to work properly without being able to have access to themissing items for Upload.

See here on how to take a screen shot, then add it to your post by clicking the little camera icon right above the post text box:
Beat

When i am updating any software they ask 4 the password And when i enter the right password downloading starts but it shows unknown ERROR

When i am updating any software they ask 4 the password And when i enter the right password downloading starts but it shows unknown ERROR

Try this article (disable firewall)
http://support.apple.com/kb/TS2799

New iMac. Flash drive is primary for OS and apps. I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files. Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

New iMac. Flash drive is primary for OS and apps. I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files. Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

Yes. Unfortunately, I don't know the specifics because I don't use iPhoto anymore and I completely copied over 15 years of MP3 files recently when I installed 10.7. Needless to say, I have not opened iTunes since and probably never will again - not because of iTunes but because of my stupidity. I did have some of the files backed up but I hadn't backed up in a while.......anyway....
When I imported my CD's, I had them go directly to my external firewire. I can't remember exactly how to set it, but in the preference section of iTunes you can specify an import destination to any drive that's available to your machine. I did this with iPhoto as well way back at one point when I was using Tiger, but I don't remember the specifics on that either. I can't imagine they would have discontinued support for that feature since then.
Sorry I couldn't help more.

I want to be a good SAP user but please help me how and can i do the right step about SAP

i want to be a good SAP user but please help me how and can i do the right step about SAP

Hi,
you can start learning SAP from an end-user/key-user perspective with the online learning portal of SAP Learning Hub, business user edition.
Further information can be found here:
SAP Learning Hub
Regards,
Arnold

The exposed service is in the right lane in BPEL converted from JPD

Hi,
Now I'm working on a project that requires using Fusion to replace the old WLI.
My major job is to convert JPD code in WLI to BPEL in fusion. (The JPD code was developed based on Weblogic Integration 8.1 )
I use a plugin for WebLogic Workshop 8.1 to export JPDs file into BPELs directly.
After some minor changes, the BPEL exported from JPD can be run on the server.
But when I open the BPEL in the visual designer in JDeveloper 11g, I see something strange.
According to my understanding, all exposed services should be placed in the left lane, and all referenced services should be placed into the right lane.
In the exported BPEL composite, when I open the composite.xml file in the visual designer, I can see all the services are in the right places.
But when I click into the BPEL process, I see all service are placed into the right lane, including the exposed service.
This really confuses me.
I tried to read the xml code of composite and BPEL to understand why in BPEL designer, even the exposed service is placed into the right lane. But I haven't got an answer.
I also tried to write a BPEL process by myself, but the exposed service icon cannot be moved to the right lane.
Does anyone has any ideas on this issue? Does oracle has some special way to deal with the code exported from JPD?
Actually, this issue doesn't cause any error in my application. I'm just curious why it happens.
Thanks in advance.

Hi,
I am also doing the same thing what you have done, please help me.
I have used BPEL export utility for exporting my JPDs to BPEL. but it was not a good help, ultimately i m creating a process manually.
the main problem what is the replacement of control(jcx files)
please guide me really it would be great help..
Thanks in advance and hope to hear from you.
my mail id is [email protected]
please send some document if you have...

How do I combine an old itune library thats on an external hardrive and a newer library thats on a newer computer into 1 library and keep them on the external hard drive so I won't use up all my memory on my newer laptop

I copied an old iTunes library off my old Toshiba laptop with windows xp and put it on an external hard drive. I have a newer Microsoft surface pro laptop with windows 8.1. I have a small iTunes library on my newer laptop. I want to combine the 2 libraries into 1, add newer podcasts to the combined library daily, but keep it all on my external hard drive, so I don't use all my memory on my surface pro. I have an older ipod classic that I have all my old library on. I love it and don't want to stop using it, but want to be able to add podcasts from my 1 library from time to time. What I usually do is download podcasts for a few weeks then, download them to my ipod. Haven't done any of this in about a year. But want to start getting regular with it again. PS I'm not very computer savy Thanks for any help or advice!

This article explains how to open a different library: iTunes: How to open an alternate iTunes Library file or create a new one. The assumption is that the whole library was copied to the external drive from the old Toshiba laptop, not just the media. If that isn't the case make a new library on the external drive in a folder called \iTunes and move the media inside \iTunes\iTunes Media before adding it to the library.
Once iTunes is using the library on the external drive you can add any content stored on the internal drive to the library by drag & drop or by moving/copying the content into \iTunes\iTunes Media\Automatically Add to iTunes. Make sure the option under Edit > Preferences > Advanced to Copy files to the folder iTunes Media when adding to library is selected. Once complete you can delete the original copies on the internal drive.
Should your library contain duplicates after merging see this recent post on deduping.
If there are ratings, playlists, play counts, or content stored on the iPod classic and not located anywhere else then see Recover your iTunes library from your iPod or iOS device.
Ideally you should backup your library to a second drive for security. See Backup your iTunes for Windows library with SyncToy for a suggested strategy.
tt2

Netware 6.5SP7 and vsphere 4.1 - the right LAN Driver ?

Similar Messages

Maybe you are looking for