Netware Access Point won't connect with Windows, but will connect to Macs

Recently we acquired Cable Internet Service, which was brought into the X Serve Network Card. After that it is transfered onto the second network card which then dishes out DHCP to all our client computers (including laptops). However, it appears that only the Macintosh laptops are obtaining internet, while the windows laptops show they have a wifi connection, but the browser applications refuse to launch on everyone of them. Any suggestions would be very helpful. Thank you.

When you reinstalled iTunes, you may not have done it correctly. It needs to be done in a specific order, or it will just compound your problems. There is a problem with the latest iTunes in Windows, and it has been requiring a removal and reinstallation. See this support document support.apple.com/kb/HT1923 and remove and reinstall by following these instructions exactly. This should fix your problem.

Similar Messages

  • Ipod classic 4th gen. Won't charge with USB but will with firewire

    Please help. I keep my old ipod running through my car charger. This charger broke recently and I replaced. The new won't charge the ipod. I've plugged the ipod into the mac and pc, using different leads. Nothing. The apple logo pops up and then a wee battery with an exclamation appears and disappears.
    If I plug it into mains using the charger which came with it it will charge (but it won't hold the charge, this I am used to, hence why it's always plugged into me car) BUT if I plug it in using a USB to ipod cable it won't work.
    Very confused.
    Can anyone help?

    Looks like yor iPod battery need to be replaced
    Bobo Frett wrote:
    If I plug it into mains using the charger which came with it it will charge (but it won't hold the charge, this I am used to, hence why it's always plugged into me car)
    FYI, you should  charge the iPod Classic, for at least 2 hours, using a USB 2.0 port at the back of the Desktop, or if you are using a Mac the USB port on the body of the Mac and not those on the keyboard, (these dont have enough power to charge the battery, which need at least 450mA current)

  • I got a new computer with Windows but have Photoshop for mac?

    So, long story short, I recently switched from mac to windows and have Adobe Photoshop CS5 installed on my (old) mac.
    I would like to install Photoshop CS5 on my new computer. Do I need a new activation code, or, more importantly, do I need to purchase Photoshop again since I have the mac version?
    Thanks in advance to anyone who replies with advice.

    Please do a Forum search for »crossgrade«.

  • Email won't load to iMac but will load to Mac Book

    I Can download mail to my Mac Book but I can't download to my iMac. It says there are 10 gb of mail waiting.

    Hello Mominator,
    After reviewing your post, I have located an article that can help with OS X Mail. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • I can access internet via boot camp with windows 7, but not when I use the Mac w/Mt Lion side. Thanks for any tips!

    I'm using a 2012 Intel-based iMac with Mt. Lion and Windows 7 with Boot Camp. I used to be able to access the internet on both sides. Now, my only internet access is through Boot Camp. At one point, access was unable on both sides but IE in Windows 7 automatically diagnosed the problem, changed some settings (which I don't know) and I could access the internet on both sides . . . for a while. Now, I can only get online in Boot Camp. Since IE detects no problems it doesn't apply the fix as it did before. Does anybody know what's going on?
    I should mention that I installed Boot Camp because there is no Mac version of the software (VantagePoint)  I need to use (duh).  I wanted to be able to use the software w/o rebooting all the time so I installed Fusion. Of course, I didn't ask the VantagePoint techs if this would solve my issue. It didn't - VantagePoint won't work with Fusion, but it will with Parallels. So I installed Parallels and imported Boot Camp. Apparantly, it was not set up properly, I'm getting all kinds of errors reported in Console (e.g. "Found cross-bounds GPT partition. GPT disk detected," mdworker cannot talk to sandbox, etc.).  The VantagePoint techs say the first step in a VM retry is to regain internet access to the Mac.
    Anybody who can help will become my new best friend. Thanking you.
    Message was edited by: Marmadukemark
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : Mark-PC
       Primary Dns Suffix  . . . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Bluetooth Network Connection 2:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network) #2
       Physical Address. . . . . . . . . : 44-2A-60-CF-D0-93
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Wireless LAN adapter Wireless Network Connection 2:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
       Physical Address. . . . . . . . . : 32-9A-DD-9F-1D-FF
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Local Area Connection:
    I neglected to add that I'm using using ethernet with a cable modem. I'm the only user, so it's not networked for others. Below is the report that was generated with respect to the connection problem - when Boot Camp could not access the internet.
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
       Physical Address. . . . . . . . . : C8-2A-14-1B-EE-D1
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::a47a:3af7:72e6:f899%11(Preferred)
       Autoconfiguration IPv4 Address. . : 169.254.248.153(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.0.0
       Default Gateway . . . . . . . . . :
       DHCPv6 IAID . . . . . . . . . . . : 348662292
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-CD-DA-86-10-9A-DD-9F-1D-FF
       DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                           fec0:0:0:ffff::2%1
                                           fec0:0:0:ffff::3%1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Wireless LAN adapter Wireless Network Connection:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Atheros AR938x Wireless Network Adapter
       Physical Address. . . . . . . . . : 10-9A-DD-9F-1D-FF
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft 6to4 Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{077AEF3E-6752-42C5-A037-9FB69A17CB27}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{83EF0082-ADD7-4283-8303-9133BD882E39}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{22AA845D-6210-4549-AAE5-3D8917BA7286}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{D364C869-F7DD-4F9A-ADBA-7EBF53DD21D2}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes

    Are you using a MacBook Pro? Is everything installed on the same drive?
    I would love to know how that install was performed. When I install Windows under boot camp, my MacBook Pro drive ends up with 4 partitions: Mac, Mac Recovery, Windows, and a small partition that I believe is used by boot camp.
    Installing BitLocker on Windows requires the creation of a new small partition that Windows will boot off. The small partition is unencrypted, while the primary Windows partition will get encrypted. The following post discusses the maximum partition issue: https://discussions.apple.com/message/22753791#22753791
    Has anyone installed Windows through boot camp on it's own drive, and if so, can BitLocker be installed on that without reaching any partition limit? I'm assuming that's possible, but would like to know before I spend hundreds on new hardware.

  • Can't connect to Access Point that is connected to the Internet (Snow Leopard 10.6.8)

    Hi all,
    I am normally not someone who posts on support forums since most of the problems can be solved be searching through piles of other questions, but this things has really got me pulling out my hair and I hope that maybe someone can help me with this super weird problem.
    So, a few weeks back, my Mac Mini (kind of old, guessing 2007) stopped connecting to Wireless networks. Since all other devices in home (iPhone, MacBook Pro and a PC) are connecting just fine I thought it had to do with my settings. All it says is: "connection timeout".
    The Mac Mini connects just fine when I plug in an ethernet cable, but that's a no go since I don't want cables laying around our living room that much.
    I tried a lot of things suggested my other people like removing settings, PRAM reset, moving the AP closer, router settings etc etc. Of no avail. Even tried to fix it by reinstalling Snow Leopard, but that didn't do it either.
    Though when I turned my MBP into an Access Point it could connect to that network just fine. That made me wonder if it's my router, but once I plug in an ethernet cable into my MBP to share Internet access it won't connect! Tried the same with my router and indeed, it connects just fine once it has no Internet connection.
    Tried searching for people that had the same problem, but I couldn't find them. Can anybody here help?
    TLDR; Mac won't connect to Wireless network that has an internet connection, but does when it hasn't.
    Thanks!

    Try disconnecting the router from the internet (WAN port) and plugging a PC directly into one of the LAN ports. After resetting, ignore the smartwifi login, click the two checkboxes, and login manually/directly with the "admin" password and reconfigure.
    If you don't want to do all that just yet, try accessing the router from the public IP address assigned by your ISP. That might work

  • When I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router

    when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
    Below is some info i get about ports.
    I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
    I still cant see apple tv after i try the DMZ method.
    any suggestion ?
    These network ports are used by Apple TV for communications on your network.
    TCP port 123 is used to communicate with a network time server.
    TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
    UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
    TCP port 80 is used for communicating with podcast servers.
    TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
    TCP port 53 is used for regular DNS.
    These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.

    When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.

  • Creative Zen V Plus won't sync with Windows Media Player 11?

    My Zen V Plus won't synchronize with Windows Media Player . I plug it into the USB, then an error message pops up in WMP that says "WMP has encountered a problem and needs to close" but if I just move the window aside WMP works fine. I then click 'sync" and it says "preparing to sync" but doesnt move beyond that. I have synced with WMP before, this problem has recently started occurring. I have all the firmware updates on my player, I don't know what is causing this problem.

    Stricker: As our disclaimer on several different parts of this forum and the register/sign up page states:
    [color="#FF0000">
    "These forums are primarily intended for user interaction. Read more."
    The moderators and administrator can not do technical support here, we are only here to enforce the rules (like not cursing.)
    Gi'ven the problem you describe, it would seem your best bet at this point would be to contact Customer Support. I doubt there is much the users here could help you with given your problem. If email support hasn't answered, did you get the automated reply? If so, did you reply to it's You won't get an advisor till you reply to the automated email, otherwise it is assumed the automated system solved your problem.
    Good luck,
    DaleMessage Edited by Dale-CL on 04-6-2007 0:43 AM

  • HP Officejet 6500A Plus won't work with Windows 10

    Help!!   Officejet 6500Aplus won't print with windows 10. Every aplication just spits out blank pages when you print.

    I have the same issue with my OJ 6500 (network connected).  And I've been just been sent on a wild goose chase to install the support assistant - which didn't actually resolve my issue.  When I go directly to the drivers, it recognizes my OS as Windows 10, but doesn't give me a matching driver package to download... How/when will this be resolved? Does anyone have a workaround?If I knew that my printer/scanner doesn't work anymore I certainly wouldn't have upgraded to Windows 10.  Win 8.1 wasn't perfect, but at least everything worked... Thanks for any suggestions!

  • TS1363 "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    Hi cueball819,
    Thanks for using Apple Support Communities.  This article has steps to try if your iPods aren't recognized by iTunes or Windows:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • The itunes library file can not be saved. you do not have enough access privileges for this operation with windows xp

    How do i solve the following error message that come with uploading to itunes Match: The itunes library file can not be saved. you do not have enough access privileges for this operation with windows xp

    Bump.

  • Access points are directly connected to 2016 wlc but not functional

    Hello All,
    access points are directly connected to 2016 wlc.
    Event log from the wlc
    AP event log download completed.
    ======================= AP Event log Contents =====================
    *Mar 1 00:00:30.157: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 1 00:00:30.161: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Mar 1 00:00:30.190: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar 1 00:00:30.191: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 1 00:00:30.204: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar 1 00:00:31.190: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Mar 1 00:01:00.088: %LWAPP-3-CLIENTEVENTLOG: Did not get vendor specific options from DHCP.
    *Mar 1 00:01:00.088: %LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.
    *Mar 1 00:01:00.089: %LWAPP-3-CLIENTEVENTLOG: Did not get any DNS options from DHCP.
    *Mar 1 00:01:00.089: %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER
    *Mar 1 00:01:00.089: %LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER
    *Mar 1 00:01:12.094: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
    *Mar 1 00:01:12.094: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Mar 1 00:01:12.094: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
    *Mar 1 00:01:12.094: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar 1 00:01:12.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    (Cisco Controller) >show port summary
               STP   Admin   Physical   Physical   Link   Link
    Pr  Type   Stat   Mode     Mode      Status   Status  Trap     POE
    1  Normal  Forw Enable  Auto       100 Full   Up     Enable  N/A
    2  Normal  Disa Disable Auto       Auto       Down   Enable  N/A
    3  Normal  Disa Disable Auto       Auto       Down   Enable  N/A
    4  Normal  Disa Disable Auto       Auto       Down   Enable  N/A
    5  Normal  Disa Disable Auto       Auto       Down   Enable  N/A
    6  Normal  Disa Disable Auto       Auto       Down   Enable  N/A
    7  Normal  Forw Enable  Auto       100 Full   Up     Enable  Enable  (Power On )
    8  Normal  Forw Enable  Auto       100 Full   Up     Enable  Enable  (Power On )
    but still access points are not functional ????
    any idea ??
    Regards

    Your AP-manager and management interfaces is mapped to port 1:
    ap-manager                       1    80       10.41.80.2      Static  Yes    No
    only APs connected to port 1 will work.
    You need to either use a switch and keep port 1 connected to it while APs join through the switch or you need to create a new ap-manager interface. not even sure if you can map it to the same port or different port! not even sure about the management interface!! it is mapped to port 1 and should be reachable anyway. it is a mess!!! have you read the best practice document that I put the link for earlier?
    So you need eventually a switch to fix your issue. direclty connected APs are not recommended.
    I am still not knowing how Cisco provided such swtich that is supposed to handle direclty connected Aps while it does not provide a smooth way to do so.
    Use a switch and everything supposed to be fine.
    HTH
    Amjad

  • My HP Pavilion p7-1439 with Windows 8 will not add Bluetooth Devices.

    My HP Pavilion p7-1439 with Windows 8 will not add Bluetooth Devices.  I ran all available updates using HP Assistant. The BT devices work with Laptop, iPhone, Surface and Ipad but not the HP Desktop.  I can access the Add Device button and the system searches but never finds any BT devices.  Any thoughts?

    Hi NumberTumbler,
    I would like to help you with your Bluetooth issue. 
    In this document Understanding Bluethooth Wireless Technology go to the section "Setting up a Bluetooth Device" for detailed information about setting up  Bluetooth devices on your computer.
    Let me know if this helps or if you need any further assistance.
    Thank you,
    I worked on behalf of HP.

  • HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

    HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

    Hey there @pepsitruck
    I understand you cannot print from your desktop however, you can print from your laptop.
    Could you please run the Print and Scan Doctor again and let me know the results or post a screen image of the results?
    This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    You can also try manually stopping and restarting the print spooler and try printing from Notepad afterwards.
    1. Click Start
    2. Type "Services" in the search field.
    3. Open SERVICES
    4. At the bottom, click "Extended View"
    5. Search for Print Spooler
    6. Right-click it and choose Properties
    7. Select as Automatic in the drop down box, close the Window
    8. Right click on Print Spooler and choose "Stop", wait until it stops and then right click again and "Start".
    9. Close out of Services and try your print again.
    When you get to your response, please include which version of Windows you're running please.
    Which Windows Operating System am I running?
    Thank you,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • My iMessage won't activate my email but will with phone number. I type my password and it says it's wrong I change it and it still says its wrong. I even made a new account and it still says the password is wrong.

    My iMessage won't activate my email but will with phone number. I type my password and it says it's wrong I change it and it still says its wrong. I even made a new account and it still says the password is wrong.

    Hi hectorness12!
    Thanks for using the Apple Support Communities! I have found an article that can help you with troubleshooting your iMessage issue. The article can be found here:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Thanks,
    Braden

Maybe you are looking for