NetWeaver 04 service pack 9 Javadoc

Javadoc for NW 04 SP9 now on SDN:
<a href="https://media.sdn.sap.com/javadocs/NW04/SP9/webdynpro/index.html">https://media.sdn.sap.com/javadocs/NW04/SP9/webdynpro/index.html</a>
Armin

Hi Raja,
Thanks for your prompt reply.
I activated the BSP page and re-tested but it does not work.
When I activate in SE80, I get the message 'Active object generated'.
When I run it through portal or web-browser ... it does not show any message but the status bar of the browser keeps moving .... forever, indicating its doing something.
There are other 2 BSP pages which are working fine, but this BSP page ( which is the most important) is giving this porblem.
kind regards,
Waseem.

Similar Messages

Install Netweaver 7.1, service pack 3 on Windows 2008 Server 64bit

Hi All,
Good Morning. I am working as Oracle APPS DBA. I had a requirement for installing Netweaver 7.1, service pack 3 on Windows 2008 Server 64bit machine.
I need this Application server for Vertex O-Series which is working with SQL Server as the database.
Can any of you guys help me in providing the document or steps in order to install this application server?
1. Pre-Requisties steps
2. Installation
3. Post steps
I apperciat your help in this.
Thanks,
Srinivas.

Hello.
We are at the same point too.
Anybody here install the Vertex O series 6 running on the Java Stack? if so, what NW release and what component?
We are currently running an older version on SAP NW640 JAVA with no issue, and I am making the assumption the new Vertex would be running on the same SAP java AS for 7*... maybe not?
The install documents from Vertex say the requirement for SAP is:
"SAP NetWeaver 7.1 with Service Pack 3 or higher" and I see that there is only 7.1 for PI and Mobile.
(Maybe they mean SAP NW 7 SP3?)
We did ask Vertex, the company, about running this on the java app and they wrote:
"Netweaver 7.1 is currently supported for deployment of O Series 6.0. Versions 7.0 and 7.3 of Netweaver are not supported.
O Series 6.0 is supported for use with Java 1.5 and Java 1.6. "
Thanks for your help. And I will post here again if I find my answer.

BSP does not show up after installation of service pack 9 on BW 7.0

Hi,
We are working on netweaver 2004s.
We have a very simple BSP page, which has been developed in BW box. Its just used to load flat files to the application server.
It was working well when we were at service pack 8. Recently we have installed service pack 9 and this BSP page either through portal or directly in web-browser does not show up at all i.e all we see is a blank page and the status bar of the browser keeps running forever.
Could you please advise what has gone wrong and is there a fix to this.
Note: other 2 BSP pages in the same BW system are working fine.
kind regards,
Waseem.

Hi Raja,
Thanks for your prompt reply.
I activated the BSP page and re-tested but it does not work.
When I activate in SE80, I get the message 'Active object generated'.
When I run it through portal or web-browser ... it does not show any message but the status bar of the browser keeps moving .... forever, indicating its doing something.
There are other 2 BSP pages which are working fine, but this BSP page ( which is the most important) is giving this porblem.
kind regards,
Waseem.

Running Sproxy from ECC 6.0/ SAP NW 7.0 - BI service pack 16

We have ECC 6.0 / SAP Netweave BI 7.0 sps 16
I want run Sproxy, after this new service pack I could not figure out how to run SPROXY by giving oue own data.
Earlier I have use dSPROXY, when I run it ask for Generate XML template, i could paste the data from previous run, now I could not paste the data .
IS there any other way, we can fill the XML template generate data.

> We have ECC 6.0 / SAP Netweave BI 7.0 sps 16
It should be PI 7.0 not BI 7.0. Correct??
> I want run Sproxy, after this new service pack I could not figure out how to run SPROXY by giving oue own data.
Couldn't understand this???
>
> Earlier I have use dSPROXY, when I run it ask for Generate XML template, i could paste the data from previous run, now I could not paste the data .
>
Couldn't understand this too.
> IS there any other way, we can fill the XML template generate data.
Your question is not clear, plz write clearly then it is possible to suggest any solution.
Regards,
Sarvesh

Display Service Pack and OS Name/Version in Flex Label

Hi,
I want to show my current system Operating system name (XP Pro, Vista, Linux..etc) along with the Service Pack level of my system on which my application is running.
I am able to show uo OS name "Windows XP" using "Capabalities.os" in Flex4.0. but not "Professional" or "Pro" exactly. But I could not find an API for showing up the service pack level.
I have to display the content in a label. I tried with Capabilities.cpuArchitecture and System.vmversion, but it shows up some other system data.
I want to show up Service pack version.
It will be good if I do not have to use any external API for that, if flex itself can provide any such API for that.
Please help.!!
Thanks,
Nitika

Hello,
The "SAP NetWeaver Application Server, Java (TM) EE 5 Edition" is a preview version of the next major release of SAP NetWeaver. Being so, it is neither a major version release, nor a service pack of a product.
Information about the upcoming Java EE 5 product, supported for production use, can be found <a href="http://www.sap.com/company/press/press.epx?pressid=6705">here</a>.
Regards,
Svetoslav

Where to find the latest Service Packs and Patches

AccAD service packs can be downloaded from SAP Service Market Place (SMP), under 'Comprised Software Component Versions'
The process for downloading the package is described below:
1. Go to SAP Support Portal - [https://service.sap.com/swdc]
2. Under Find your Software, see the 2nd bullet titled A-Z Index, and click on the link to Support Packages and Patches
3. Click on the letter A
4. Click on ACCEL. AD FOR SAP NETWEAVER
5. Click on AAD 2.2 FOR SAP NETWEAVER
6. Click on Comprised Software Component Versions
7. Click on AAD APPL DELIVERY ENGINE 2.2
8. Click on the OS version that matches your AccAD landscape
9. Scroll down to the window and find the Downloads window.
10. Look for the latest version by scrolling down further (internal scrollbar) and pay attention to the Last Changed date column.
11. Click on the link to the TGZ package which will start the download
Zeev

Hi Stephan,
I wanted to add onto Zeev's precise answer.
First of all we appreciate your feedback, we will look into why the above mentioned links are not updated as expected.
Regretfully our SDN page is a bit outdated and we are in the midst of updating it.
Currently, AccAD 2.2 SP4 as available for download and has already been adopted by some of the main SAP customers and in addition by new customers.
The release notes indicating the differences can be found as part of the installations but I hope to provide the 2.2 SP4 notes later this week - in a formal SDN announcement.
Further more as for additional updates:
- AccAD 2.3 is currently undergoing validation phase and is expected to enter Ramp Up phase in October of 2011.
- AccAD 2.3 as with every version brings with it new capabilities and increased performance and quality as well as a more up-to-date PAM.
- We are currently in the planning phase of the next AccAD version to begin development very soon and would be very happy to hear the feedback that you or any other of our customer base may have. To do so, I encourage you to contact me directly - as i cannot post an email address here - my details can be found in my business card found in this forum.
- We will be attending and presenting at SAP TechEd Las Vegas and TechEd Sapphire Madrid - we would be happy to meet up in case you will be present.
All the Best,
Smadar
Edited by: Smadar Ludomirski on Sep 11, 2011 9:29 AM

Portal problem in navigation after upgrade Service Pack 25 (SP25)

Hi experts,
We have upgraded our NetWeaver 2004 (6.40) environment with Portal 6.0 to the latest Service Pack 25 (SP25).
After the whole upgrade a strange problem occurs in the Portal when using the portal navigation. After a few clicks in the navigation a JavaScript error in the browser occurs. We use Internet Explorer 7 and 8.
When the error occurs, we have to refresh the browser to use the portal again. I have the idea that the problem is relating to the session management but i can't figure it out.
Any ideas?
JavaScript error details:
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; Trident/4.0; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Timestamp: Mon, 25 Jan 2010 11:29:53 UTC
Message: Permission denied
Line: 944
Char: 39
Code: 0
URI: http://portal.url.com:50000/irj/portalapps/com.sap.portal.epcf.loader/script/standard/js13_epcf.js?6.0810
Edited by: J. Weghorst on Jan 29, 2010 11:11 AM

Dear Benjamin,
Thank you for your answer. I think it helped us with the scope of the problem.
We use a FQDN for the Portal and also a FQDN for the backend (R/3). There is nothing changed in those hostnames between the upgrade from SP19 to SP25. The browser problem occurs after a few clicks (10 - 30) in the left-side navigation and is not based on time or specific iView. So its difficult to find a routine structure in the presents of the error.
I have also used the tool to analyse the JavaScript code. It gives a error on a not defined object value within the file js13_epcf.js?6.0810.
It seems that the part of the code had to do something with the iFrame usage of the Portal. But it's to difficult to find the real cause of the issue.
Any ideas? Thanks in advance.
Edited by: J. Weghorst on Feb 1, 2010 4:51 PM

BI Activities in Service Pack Upgrade

Hi,
We are upgrading all the systems to the next service pack. Presently BI is on Netweaver Stack 12 and application stack 14. Basis is planning to upgrade the Netweaver stack to 17 and application stack to 19. As part of this upgrade project they would need the activities which can be planned from BI side. Can any one help me to identify the activities need to be planned from BI side during and after the service pack upgrade. Based on this I would need to prepare the estimates for the activities.
Regards
Vijay

No you don't need to stop SQL Services before patching, but you may be required to restart SQL after a patch has been applied for changes to take effect.
SP installation checks for locked files, it would suggest to stop identified services manually.
You don't need to do before hand.

PI 7.0 Service pack level

In PI 7.0 system
SXMB_IFR    > Integration repository > logon as PISUPER > from menu bar     help > Information
If you do the above it shows a pop up screen
SAP Netweaver
Exchange infrastructure
System information
Application :Design : Integration builder
User          : pisuper
Language   : English
Server        : hostname_sid_00
Server node: server 0
Runtime enviroinment
Java version 1.6.0_05
Java vendor Sun micro system
Version
Service pack 9
Release 645_VAL_REL
Latest change 378089
Sync time $(sync time)
   Now I have to increase the Service pack from 9 to 12
What Should I do for this and how to do.Please tell me the procedure.I would be grateful for your help

PI7.0 contains both ABAP & JAVA stack.
You must upgrade patch level 9 to 12 for both stack.
Only JSPM upgrade is not enough. go through service.sap.com/sp-stacks and see patch level for each components for ABAP & JAVA stack.
1st upgrade ABAP patches then go for Java patches.

Download portal service packs

hi guys
pls tel me how to download services packs for enterprise portal from service market place..
thanks
regards
kamal

Hi,
Go to the following link
https://websmp208.sap-ag.de/support
in that go to downloads -> SAP Support Packages -> My companies Application Components -> SAP netweaver -> select your software -> entry by component -> Application server java
Thanks & Regards,
Vidyadhar K

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Microsoft Service Pack 2 - not all versions are equal; how to update to the latest one "safe

I posted this under another topic where it was relevant, but thought the instructions I got from Microsoft were useful (as was my experience in using them as I sent back a reply to them with the problems I encountered [none of which were particularly bad]):
One important point to note is that not all Windows XP SP2 upgrades are equal.
I had a different issue and spoke to Microsoft, who advised me to uninstall the version of SP2 I had and reinstall the newest version (the old version was about 70mb, the new one nearly 250mb).
Apparently the old SP2 had quite a few problems with it; I've found the new one to be "simply stress free" since installing...
The SP2 file name I installed (ie the newest at the time I did it) was "windowsxp-kb835935-sp2-enu".
Here's their instructions - I disagree with the way round that they suggested downloading the update (ie I would strongly advise downloading the update and having it sitting on your desktop before doing anything!!! - please see my feedback email to them that follows (you will note that I had problems connecting to the internet after uninstalling the earlier version; this, combined with the fact that I could barely read what was on the screen would have given me a major inconvenience had I not done this)!!! (and don't blame me if it goes horribly wrong - it's also worth double-checking that the version of SP2 the email links to is the most up to date. I've had a quick check myself, and it does indeed appear to still be the most up to date):
MICROSOFT'S EMAIL (make sure you also read my reply below):
MESSAGE:****************************************** ****************************This is an email from Microsoft about your support incident.When replying to this address: + It helps us if you do not include the original message + Please keep the case number (SRxxxx) in the subject lineThank youMicrosoft Product Support Services ******************* The message from Microsoft follows ****************Hi Gregory,Firstly uninstall SP2 by going to Start>Control Panel>Add/Remove Programs and then reinstall it in a clean boot.. Click Start >> Run >> In the run dialog box type msconfig and then click ok 2. Put a dot in selecti've startup 3. Uncheck all of the check boxes that become available except Process System.ini file and Load system services 4. Go to the Services tab along the top, click Hide all Microsoft Services 5. Then disable any remaining services 6. Click apply and then close 7. Finally select yes, this will start in a clean boot. 8. Then go to (http://www.microsoft.com/downloads/d...DisplayLang=en) and download and install Service Pack 29. To return your PC to normal, open the System Configuration Utility, click "Normal Startup", click OK and restart. Then restart your computer and try accessing updates againPlease let me know the results of these methods, particularly if there were any steps that you were unable to complete successfully.
MY REPLY:
HiI successfully carried out the installation on Saturday.A few minor problems ensued (the second one may have cause a novice user real problems! Certainly caused me some concern whilst working through it!). I had to reinstall ATI drivers from scratch (for Radeon 9800 Pro); this was however the only set of drivers that appeared to "detach" itself. The main problem here was that instead of using the usual standard VGA driver (which it does when I uninstall it once a month to install updated drivers), it used some other driver that made the screen very difficult to see (especially on blue backgrounds!). Running ATI's total uninstall program sorted this out however, and fortunately I had the last update package from ATI still on my system. After uninstalling and reinstalling there appeared to be no further video problems.2. After installing SP2 (and before installing above), whilst I was in the process of getting everything up and running (eg installing the security updates) the system randomly froze about 4 or 5 times; the only way to sort this out was to use the power button. I traced this problem to Windows changing my wireless networking settings so that it handled everything; I have a Netgear adaptor the software for which usually controls this (Netgear Smart Wizard). Basically the two were trying to do the same task and causing crashes; on switching Windows management off, things settled down (the Netgear driver did not need to be reinstalled).3. As a minor point, after the upgrade and installing all other updates, I noted that Microsoft Update was no longer running; I had to reinstall it from Windows Update and the messages I got whilst installing suggested that it was still partially installed but that there were problems with it. It now works.4. As a final minor point, I attach the Scan log from Registry Mechanic which I ran after everything was up and running; it fixed various problems within the registry. I note that the majority of errors are inconsequential, but note that a few do relate to the various Microsoft installs; maybe the installer program for SP2/ Media Player 0 need to sort these out in future releases? Don't think they're a real problem though!The instructions supplied worked fine; one thing I would suggest is that users are instructed to download the SP2 upgrade pack to their desktop prior to uninstalling the original SP2; I believe that my internet connection problems started after I had uninstalled the original SP2 which may have caused problems downloading the new SP2. It also ensures that the download is successful (eg if the site was down for maintenance); I was advised whilst uninstalling SP2 that about 20 programs/drivers would not work properly after the uninstall and so the immediate reinstall was vital!One thing that seemed to fix after reinstalling was a problem I was having installing Media Player 0; after installing it previously, every time I checked for updates on it the whole program would reinstall. Now however this has fixed. I will let you know if I encounter any further problems, but things all seem to be fine now, touch wood.....!
Hope this helps!Message Edited by gjc26 on 0-27-2006 02:50 AM

One small thing - I believe the reason why some of my drivers were messing up was because they were SP2 specific; the older drivers and the ones that were compatible with both SP and 2 were fine.
As soon as I did the reinstall, all of the drivers/programs that were not working, worked (aside from the ones that I mentioned in my attached email above).
So, if after uninstalling the old SP2 you are told that loads of drivers/programs will not work, fear not - most should fix themselves upon installing the new SP2.
G

Can I obtain a CD-ROM with the latest revision of Adobe Reader for a Windows XP system w/ Service Pack 3. I do not want to go online with this system. I have dedicated it to read all of my PDF Files only.

I have 4 computer systems, 2 of which run under Windows XP w/ Service Pack 3. I have dedicated these systems to the task of reading all of my PDF Files which I have collected from my recent college career. The desktop system I want to use is an old Dell Optiplex GX240 with Acrobat Reader 4.0. The other Windows XP system I have is an old HP Laptop with Adobe Reader 8.1.4 installed. I want to update both systems to the latest version that is available for Windows XP w/Service Pack 3 installed. So, because I do not want to place these system online, would it be possible for me to obtain a copy of the Adobe Reader software I need on a CD-ROM? - Ken DeWitt, a 68-Year-Young Vietnam Veteran and recent college graduate...Summa Cum Laude.

You can use an in-line computer to download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/

ORADC problem on Windows 2000 with Service pack 1 and service pack 2

Hi,
I have a VB application running on NT4.0 workstations. It uses
ORADC control to talk to ORACLE 7.3 When I load it on Windows
2000 with service pack 1 or service pack 2, I encounter some
problems.
The ORADC control is used in most of the VB forms and the
Refresh method of the ORADC conrol is used to refresh the APEX
TRUE DBGRID PRO control. When this action is executed, I receive
a run time error
"Method Refresh of object '_DORADC' failed Err#: -2147417848
It works fine when no service pack is applied on Win2K.
Can anyone tell me what's going on?
Thanks

satheesh_p wrote:
Thanks for your reply.
When I checked the system requirements. I couldn't find information on windows 2003 service pack 2
link http://www.adobe.com/products/coldfusion/systemreqs/.
Whether your OS is windows 2003 with service pack 2?
Are you sure coldfusion 8 will work on windows 2003 with service pack 2?
Regards,
Satheesh.
Well it was there, if you understand the naming properly:
ColdFusion 8 system requirements
Windows
Intel® Pentium® II or AMD Athlon processor
Microsoft®
Windows® 2000 Professional with Service Pack 3; Windows 2000 Server,
Advanced Server, or Datacenter Server with Service Pack 3; Windows
Server® 2003 Web, Standard, or Enterprise Edition with Service Pack 1
and R2; Windows Server® 2008; Windows XP Professional or Home Edition;
or Windows Vista®
R2 is the "offical" Microsoft name for service pack 2.

Service pack 4 on windows 2000 server with oracle 8.1.7

Hi,
does anyone know if there is any problem installing services pack 4 on windows 2000 server having oracle 8.1.7.?
Thanks.

I have one machine with that configuration and I had not any problem.
Joel P�rez

NetWeaver 04 service pack 9 Javadoc

Similar Messages

Maybe you are looking for