Netweaver 04s F4 on Fiscal Year / Period Variable does not retun any value

Netweaver 04s
F4 on Fiscal Year / Period Variable does not retun any list. When I tried to run the same query in RSRT, It gave a screen where it stopped at a break point.
62 *_____________________________________________________________________
63
64 * error in >> l_repid <<
65 * >> l_include <<
66 * >> l_source_line <<
67 *__________________________^^^^^^^^^^^^^^_____________________________
68 BREAK-POINT. "#EC NOBREAK
69 l_message = rs_c_true.
70 ELSE.
71 CALL FUNCTION 'RRSV_SYSTYPE_GET'

Press F5 after that..lets see wat happens to it.
and tell wat value is there in your 0FISVARNT infoObject.
Regards,
San!

Similar Messages

Web Report not printing the fiscal year period variable value

Hi,
In web report where in one text element, we enabled the fiscal year period variable value to display
in the report result.
If we run the report then this fiscal year period is displaying in the general information.
We have print button (Java Code), where user can take a printout of the same report.
In the printout this Fiscal year period is NOT PRINTING, other variables like rollup time, technical name of report etc are printing perfectly.
It is required to print the fiscal period also in the print out of the report.
Any help to come out of this.....
Thanks
Srinivas

Hi
Any Help.....
Srini

Error while entering the Fiscal Year/Period Variable

I keep getting the following error message when I try to input or select the Variable on the report that has been executed on the Portal. Everything is fine when done through Bex.
 Please enter value in permitted format for variable Fiscal Year/Period (Selection Options, Optional).
Entry needs template ___/____
For characteristic , enter value in a permitted format
Would anybody have any clue as to why?? It does have the Fiscal year Variant.
Thanks

This is fxed in BI JAVA SPS 12 Patch 2. Not sure whether there is any OSS notes for earlier SPS.

Issue with Fiscal Year period - Variable

Hello,
I have requirement where I have two fiscal year variables selections available for the users. Both are independent to each other. FOR EX: A & B
1ST Fiscal year period is straightforward. It is a single variable selection where User enters the fiscal year period then the Key figures data will be available to the user for that particular fiscal year what is selected in the variable screen.
For ex: If user enters 01.2007 then the values will be only for that particular month/period
However, the 2nd Fiscal year period user wants a Range (From and to). This is also a Single selection variable. Here user enters only TO value, which it should go and get the lower value from first variable screen and then it should take the higher value from the 2nd Variable screen and should calculate the result as a range.
How this can be sorted? Can someone please help me to sort this Issue? If we need a customer exit, can you please give me some sample code?
Thanks in advance
Harish

Hi,
Create 3 variable
One for from variable which will user input ZVAR1
2nd to variable will be user input ZVAR2
3rd variable be variable exit type ZVAR3
In exit populate the VAR3 by reading the two user input variable.
and use the option
Try this:
 when 'ZVAR3.
 if i_step = 2.
 read table I_T_VAR_RANGE into z_t_var_range
 with key VNAM = 'VAR1'.
 read table I_T_VAR_RANGE into z_t_var_range1
 with key VNAM = 'VAR2'.
 ZE_T_RANGE-SIGN = 'I'.
 ZE_T_RANGE-OPT = 'BT'.
 ZE_T_RANGE-LOW = z_t_var_range-LOW
 ZE_T_RANGE-HIGH = z_t_var_range1-LOW
 APPEND ZE_T_RANGE TO E_T_RANGE.
 clear ZE_T_RANGE.
 ENDIF.
Thanks,
Debasish

How to verify that the variable "does not contain" a value?

Hi
I am using CP 7.0.1.237.
We want to use Text Area widget for a custom quiz and verify an answer. While we figured out how to verify the existence of certain keywords, we are not able to figure out how to verify that the content should NOT contain certain keywords. For example, we want to ensure that the text entered in this widget should not contain "Transformation" and "Non-compliant".
Is this possible at all?
Thanks
Sreekanth

Here's what the solution might look like in JavaScript. This would be for SWF output and aimed at Cp 7. For Cp 8, this would still work for SWF output, but you'd probably want to take advantage of the new unified JS API that gets and sets Cp variables for both SWF and HTML5 output. You can read more about that here: Common JS interface
//Get the text area value from Captivate (SWF output Only)
var cpTextAreaValue = document.Captivate.cpEIGetValue('m_VarHandle.v_TextArea);
//convert the value to lower case to properly compare
cpTextAreaValue = cpTextAreaValue.toLowerCase();
//Check if text area value contains the words "transformation" or "non-compliant"
if(cpTextAreaValue.indexof('organizational') > -1 && cpTextAreaValue.indexof('behavioral ') > -1 && cpTextAreaValue.indexof('managerial') > -1 && cpTextAreaValue.indexof('transformation') < 0 && cpTextAreaValue.indexof('non-compliant') < 0){
//the text area has the correct answer so increment varScore
//get the current score from Captivate
var score = document.Captivate.cpEIGetValue('m_VarHandle.varScore');
//increment score by 1
score++;
//set score in Captivate
document.Captivate.cpEISetValue('m_VarHandle.varScore', score);
} else {
//the text area does not have the correct answer so show message to user inside of Captivate
document.Captivate.cpEISetValue('m_VarHandle.v_message', 'Answer is not correct');
This JS has not been tested. Note that the "does not contain" operator is done using the "indexof" operator in JS.
Jim Leichliter

Up to the period : Fiscal year period Exit variable is not working

Hi Experts,
I have the following code to get the upto the Fiscal year period variable .It shoudl fetch the Values From the starting of the Fiscal period like 2009001 whatever the period user enters.But currnelty it is not woking.Please let me know am I doing any mistake in code.currently it is only fetching for the month user enters not up to the period.
Prasad
Variable Name : ZUPTOPER
User Entry Var : 0P_FPER
WHEN 'ZUPTOPER'.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO loc_var_range
      WHERE vnam = '0P_FPER'.
        fper = loc_var_range-low.
        fper+4(3) = '001'.
        CLEAR l_s_range.
        l_s_range-low      = fper.
        l_s_range-high     = loc_var_range-low.
        l_s_range-sign     = 'I'.
        l_s_range-opt      = 'BT'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.

Hi Prasad,
This would be happening if you have put the user entry variable in the global filter of your query.
As a result the complete data set is restrcted to get the data only for one month.
Please use the variable for user entry month in a selection and not globally.
-Vikram

Fiscal Year / Periods does not show properly in WebI and compunding

Hi,
I have few reports where I am using Fiscal Year /Period as filter.
I have created a Universe on the top of a SAP BI Query and did not do any customization.
Then I created a WebI report. In this report I created various filters beside Fiscal Year / Period. When I run report, filter window opens. I can select all other filters but when it comes to Fiscal Year / Period it does not show me the values I want to see. It shows AUG 0001, APR 0025 etc. I want to see AUG 2010, MAR 2009 etc so that I can select them and get the data of the required Fiscal Year / Period. In Cube I have the required data. If I select MAR 0010 etc I donu2019t get any data.
On the other hand if I put fiscal Year / Period in columns or rows it shows the right value.
If also run SAP BI Query and Fiscal Year / Period in Variable then on variable screen I can see the right value from where I can select and get the required result.
Do I have to do any step at Universe level or something else?
It seems that Fiscal Year / Period is compounding.
Is there any help?
Thanks
Bashir Awan

Ingo,
for thanks for igniting my thoughts in this regards.
Yes these values do exist in SAP BW.
It is some how compunding the values at filter level.
It does not let me see the whole value when filter screen popup in BOBJ.
In SAP whole value shows when variable screen popup, I see three columns Fiscal Year / Period. Text, Posting Period Key, and Posting Year Key.
Fiscal year / Period Text which shows Aug 2009, Posting Period Key which shows our period 1 to 16, and Fiscal year key which shows 2009 etc.
Is there any setting in BOBJ which compunds the year for variable screen so that we may see the whole values for filters?
thanks

Interfacing S7-300 PLC with OPC variable not having any value

Hi, i am trying to interface a Seimens S7-300 PLC with LabVIEW with the MPI protocol. I followed the webcast "Connect to any PLC using LabVIEW". There are 2 problems that i face,
1. There is a Timeout Dialog Box which ofcourse times out the connection to the PLC. This allows a max time of 30seconds. Can i increase the Time out in any way?
2. When i create a variable as shown in the webcast, it does not have any value nor does it have a time stamp value as the variable in the webcast. I am uploading a picture here to make it clear. I wanted to know why does this happen? It does display the system variable values as being valid and also updates them.
Thanks.
LabVIEW 8.2,8.6,2009...still learning
Attachments:
bolen input error.JPG ‏106 KB

Hi David,
This is the webcast i am talking about
http://zone.ni.com/wv/app/doc/p/id/wv-263
I am using LabVIEW 8.6, NI OPC Servers to connect with an S7-300 PLC using the MPI protocol. Following the procedure outlined in the webcast:
Opened OPC servers:
1.Created a Channel.
2.Cose the device driver.
3. Set the serial communcations settings(Baudrate etc) according the configuration settings of the PLC.
After doing step 3 i get a dialog box asking me to set the time out period of the PLC (which i set to 30 seconds i-e the max that was allowable). I also set the write attemps before failure(which i set to 8).
4. Added a Device and gave it an arbitrary name.
5. Chose the device model.
6. Set the Device ID to 1.
Than i added a tag. Gave the name Input, the address of the input and all(which was accepted by the OPCServer).
After creating a tag when i open the OPC Client, all system variables are displayed as being valid and also get updated but the tag i created has no value and there is not updating taking place as indicated by the time stamp. I will change the tag and also see if i can upload a video of exactly what i am doing.
Thanks for your reply.
LabVIEW 8.2,8.6,2009...still learning

Variable for Fiscal Year Period in cube "0ECCS_C01" - Urgent

Hi all,
I have created a query based on cube "0ECCS_C01". I have restriced the characterstic " Fiscal Year Period" on "Period/Fiscal Year (Single Value Entry, Required)" variable. Output of the query are just 2 numbers : sum of "cumulative value GC" and sum of "period value gc" for given period. This query is working fine in query designer. The variable takes input in following form "001.2008". I have checked that in analyzer that the 'key' value of the variable is in this format "001.2008".
Now in VC , when i place "001.2008" in start point coding for fiscal year, it is giving error. Can any one please tell me that why it is throwing an error.I have given the same format as i gave in query designer. or shud i give period in some other format??
Please respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi,
can you give us further information about the data type in the cube resp. the infoobject, which is used in the cube for the fiscal year/period?
Maybe you can try 0002008. Can you check which values you can enter when you execute the query in the web, so that the value helps for the variable comes up?
Best Regards
Marcel

Text variable for Fiscal year/period

Hi gurus,
We are on BI 7.0 (PL 15). In G/L i am using the standard 0FISCPER text variable 0T_FPERF in the columns, which should e.g. produce the text "04.2008".
However instead it displays "4 .0800". Adding Fiscal year/period 0FISCPER to drilldown shows a correct format in the rows "APR.2008", so the problem seems to be only with the text variables.
I have checked on a reference 7.0 system where the same variable is working fine, so i assume that some fix must be available. Any hints as to what should be performed to correct this display error?
Points will be rewarded.
BR
Morten

Hello Jamspam,
I had a similiar problem with indicators in BEX. I had an numerical indicator that displays me value in a very weird way.
My solution was to upgrade my frontend, with SAP Business Explorer patch.
Have you got the latest BEX patch (or others) on your frontend? No guarantees that will solve your case, but for me it worked
Regards,
Bruno

Custome variable exit for fiscal year/period

Hello BW Gurus,
Q1[1,2,3] Q2[4,5,6] Q3[7,8,9] Q4[10,11,12] quarterly periods
I have a custom variable exit as shown for fiscal year period
 IF LOC_VAR_RANGE-LOW+4(3) =< '003'.
 L_S_RANGE-LOW+4(3) = '001'.
 ELSEIF LOC_VAR_RANGE-LOW+4(3) > '003' AND
 LOC_VAR_RANGE-LOW+4(3) =<'006'.
 L_S_RANGE-LOW+4(3) = '004'.
 ELSEIF LOC_VAR_RANGE-LOW+4(3) > '006' AND
 LOC_VAR_RANGE-LOW+4(3) =< '009'.
 L_S_RANGE-LOW+4(3) = '007'.
 ELSE.
 L_S_RANGE-LOW+4(3) = '010'.
 ENDIF.
Now this works fine to give me the Current Quarter ....say if user puts 005/2007 i get the data Current quarter as [4+ 5] i.e. April and MAy data. Now for Previous Period I gave an offset as -3 to -1 inorder to get data for Q1[123] but the requirement is changed and I want the same time period i.e. [1+2] and not the entire quarter since the Current Quarter calculates only for 4 and 5.
I hope u are getting my point....please give your suggestions will reciprocate with lots of points

Hi gaurav,
Basically If I am selecting period 005 I am getting the data for 4 and 5 as Current Quarter i.e. April is the starting period of that Q2.
Similarly the previous Quarter should also give me data for period 1 and period 2.
Right now the offset I gave is -3 to -1 on my custom variable so i am getting data for the entire previous quarter which is Q1[1,2,3] but in reality i just want data for period 1and period 2.
Can you please help me in this
Appreciate your concern
Thanks

Custom exit variable for fiscal year/period

Hi BI Experts
1) In one of the column i just want Budget data to be displayed for the entire year..i.e even if the user enters 005/2006 for fiscal year /period that column should display 001/2006 to 012/2006 Budget.
I have created a restricted KF for 0AMOUNT restricted by version(for Budget), valuetype (for Budget )
now how do I assign variable for Fiscal year/period...and the problem is posting period is not populated ...I mean there is no transformation for that...
Can you share your experience on that ...full points wil be awarded...
Thanks

Hi Ajay and Pradhiba
I am really sorry for assigning you guuys points ...wasa bit busy ...
The problem is that the year and posting period is not populated...there fore I cannot use those time characteristics...
Now I have only fiscal year/period populated..now i want
if the user enters 005/2006 ....i want my first column to calculate the data for 001/2006 to 012/2006 ...thats the req...
can u share ur ABAP experience in that...
thanks

Custom variable for fiscal year/period

Hi BW Experts,
My problem is only fiscal year/period is populated
(fiscal year and posting period is not populated) and I need to have a custom exit ...that if the user enters 006/2007 i need to have a varaible which will contain 001/2006 to 012/2006 ..i.e data for entire year.
It doesnt matter which year the user enters ...i should fetch data for the entire year
I am very weak in ABAP programming ..if any body can share their experience..I would appreicate with full points
Thanks

Create a customer exit variable(not ready for input) var1 with interval
var2 is a ready for input variable that take the value entered by the user.
IF I_STEP = 2.
WHEN 'var2'.
      DATA: v_mth_beg TYPE d,
                 v_mth_end TYPE d
      REFRESH e_t_range.
      CLEAR l_s_range.
      LOOP AT i_t_var_range INTO loc_var_range
               WHERE vnam = 'var1'.
        EXIT.
      ENDLOOP.
      CONCATENATE loc_var_range-low+0(4) '001' INTO v_mth_beg.
      CONCATENATE loc_var_range-low+0(4) '012' INTO v_mth_end
      l_s_range-sign = 'I'.
      l_s_range-opt = 'BT'.
      l_s_range-low = v_mth_beg.
      l_s_range-high = v_mth_end.
      APPEND l_s_range TO e_t_range.
try this out.Hope it helps.
Regards,
Rakesh

How to set the fiscal year period as default in variables

Hi All,
How to set the fiscal year period as default it shoud take previous period when the report is executed.
And also I need to do the same changes in reporting agent.
Could you please any one help me.
Points will be given.
Thanks!
Best regards,
Ajay.

Hi Ajay,
Create a customer exit variable.Write the code in the include 'zxrsru01' using system date.
take the system date from the system date variable and using that you can get the current fiscal year period.use this value and using string commands, you can get period.
subtract 1 from this value.Using this you can get the previous fiscal period..
Please let us know, if you need the coding part
Hope it helps
Thanks,
Teja

Text Variables to show Start and End Date of Fiscal Year Period

Hi,
I am creating a query that has user enter a starting fiscal year period and posts information by Fiscal Year Period going back 14 periods. I am able to put the fiscal year period in the heading for all periods, but would also like to add the start and end calendar day for each listed period. Can that be done using a replacement path text variable or is that something more for a customer exit variable?
Thanks in advance for any thoughts provided.
Bill

Hi,
This is one of my exit that display the calmonth (offset -12). Usefull when I have to retrieve in a KF a complete rolling year depending one calmonth.
S_VMUCMN is my selection variable
S_TXTCMN_M12 is my text variable calmonth-12
S_TXTCMN_M0 is my text variable for selected calmonth.
WHEN 'S_TXTCMN_M12'.
    IF i_step = '2'.
      LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'S_VMUCMN'.
        CLEAR l_s_range.
        " First day of the selected month
        CONCATENATE loc_var_range-low '01' INTO l_calday.
        CALL FUNCTION 'YFRBW_FUM_CAL_DATE_IN_INTERVAL'
          EXPORTING
            date      = l_calday
            months    = 12
            signum    = '-'
          IMPORTING
            calc_date = l_calday.
        l_s_range-low = l_calday+0(6).
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Thus, in KF header you have to put the two text variable to display the complete period.
Hope it helps,

Netweaver 04s F4 on Fiscal Year / Period Variable does not retun any value

Similar Messages

Maybe you are looking for