Netweaver 2004s BI installation stuck in "check ddic password"

Hello
iam installing netweaver 2004s BI .The installation is stuck on phase 27 of 95 " check ddic password " .
      i have tried with the master password as well as ddic standard password ,but still it is not continuing.
       could any body help me in doing so.
ESWAR.

Hi,
While doing the system copy I am getting the similar error like "Test logon to SAP system <sid> failed. Make sure that the user DDIC exists and that the password of the user DDIC is correct". I tried to login to the system with the users DDIC and SAP* but it is giving the error "DB-error - 0" in the bottom of the screen. 
I have included the parameter login/no_login_sapstar=0 in the instance profile and restarted the instance. Now I am able to login to all the clients with SAP* user id with the password 'pass' and changed the password of the user DDIC to its default. I tried to login to the system, but still the same error. I tried to continue the installation but still it is showing the same error message "Test logon to SAP system <sid> failed. Make sure that the user DDIC exists and that the password of the user DDIC is correct".
Could you please suggest me the solution for this issue.
Thanks in Advance.
Kind regards,
Mogileeswar

Similar Messages

  • Installation stop at check DDIC password.

    Hello everybody,
    I am trying to install the IDES SR3 on windows (x64) and oracle.
    but my installation is stop on the Check DDIC password phase.
    I can log on using the user name DDIC and password 19920607.
    So please suggest me How to solve the problem and continu
    with the installation.
    Thanks
    Ganesh

    HI,
    NOw I have strange problem, I am able to log on frist time by using the standard DDIC password,
    but after that I am unable to Logon.
    Second thing, SAP MMC is shown in green color, when I am trying to log on  by SAP logon pad
    it does not show the SAP logon screen.  I have been wait from last 30 Min
    but till I am not get the SAP logon screen
    At my PC two IP one for Loopback adpater second is the network IP
    I am trying by using both but till not get sap logon screen
    Also when I check the SAP MMC workprocess continuosly read the table REPORTEXT.
    Please suggest me How to get the sap logon screen?
    what may be problem?
    Thanks
    Ganesh

  • Installation error at CHECK DDIC PASSWORD

    Hi,
    I am installation SAP ECC on MSCS. my installation till enqueue replication server went well but when i install the CI instace on node A it throws me out at CHECK PASSWORD STEP. the log is below please suggest.
    TRACE      [iaxxgenimp.cpp:1093]
               showDialog()
    waiting for an answer from gui
    TRACE      [iaxxdlghnd.cpp:215]
               CDialogHandler::doHandleDoc()
    ACTION_OK received
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.762 NWDialogInstance.getRFCUser(DDIC.000)
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.762 NWUsers.getAccountData(DDIC.000)
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.762 NWUsers.haveAccountData(DDIC.000)
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.777 NWUsers.haveAccountData() done: true
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.777 NWUsers._readAccountData(DDIC.000)
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.777 NWUsers._isSystemRead(DDIC.000, rfc)
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.793 NWUsers._isSystemRead() done: false
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.793 NWUsers._readAccountData() done
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.793 NWUsers.getMasterPassword()
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.793 NWUsers.getMasterPassword() done: XXXXX (master password is set)
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.793 NWUsers._useMasterPasswordForAccountData(DDIC.000)
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.793 NWUsers._useMasterPasswordForAccountData() done: true
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.793 NWUsers.getAccountData():
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2006-12-11 18:42:12.793 NWDialogInstance.getRFCUser() done
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter CLIENT set to value 000.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter USER set to value DDIC.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LCHECK set to value 1.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter PCS set to value 1.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LANG set to value EN.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter ASHOST set to value node1.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter SYSNR set to value 01.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:520]
               CAbRfcImpl::checkConnectInfo
    RFC connection information checked successfully.
    WARNING[E] 2006-12-11 18:42:12 [iaxxrfcimp.cpp:433]
               CAbRfcImpl::openRfcConn
    FRF-00007  Unable to open RFC connection.
    TRACE      [iaxxrfcimp.cpp:434]
               CAbRfcImpl::openRfcConn
    Failed to open RFC connection
    TRACE      [iaxxrfcimp.cpp:436]
               CAbRfcImpl::openRfcConn
    Password logon no longer possible - too many failed attempts
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter CLIENT set to value 000.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter USER set to value DDIC.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LCHECK set to value 1.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter PCS set to value 1.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LANG set to value EN.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter ASHOST set to value node1.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter SYSNR set to value 01.
    INFO       2006-12-11 18:42:12 [iaxxrfcimp.cpp:520]
               CAbRfcImpl::checkConnectInfo
    RFC connection information checked successfully.
    WARNING[E] 2006-12-11 18:42:12 [iaxxrfcimp.cpp:433]
               CAbRfcImpl::openRfcConn
    FRF-00007  Unable to open RFC connection.
    TRACE      [iaxxrfcimp.cpp:434]
               CAbRfcImpl::openRfcConn
    Failed to open RFC connection
    TRACE      [iaxxrfcimp.cpp:436]
               CAbRfcImpl::openRfcConn
    Password logon no longer possible - too many failed attempts
    TRACE      [iaxxbjsmod.cpp:657]
               CJSlibModule::showOkCancelBox_impl()
    <html>Test logon to SAP System AP0 failed.<p>Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.</html>
    TRACE      [iaxxgenimp.cpp:1093]
               showDialog()
    waiting for an answer from gui
    TRACE      [iaxxcnclhd.cpp:83]
               doHandleDoc()
    ACTION_CANCEL requested
    TRACE      [iaxxcnclhd.cpp:657]
               doHandleDoc()
    <html><head></head><body> You are about to cancel the <b>SAP ERP 2005 Support Release 1 > SAP Systems > MaxDB > High-Availability System > Based on AS ABAP > Central Instance </b> installation.<li>Choose one of the following:</li><ul> <li>Continue - to continue the installation.</li> <li>Stop - to stop the installation and exit SAPinst. You can continue the installation later from this point.</li></ul>Notes:<ul> <li> If you stop the installation after the installation activities had started, do not use the <b>SAP ERP 2005 Support Release 1 > SAP Systems > MaxDB > High-Availability System > Based on AS ABAP > Central Instance </b>, as it is not ready to be used.</li></ul></body></html>
    TRACE      [iaxxgenimp.cpp:1093]
               showDialog()
    waiting for an answer from gui
    please let me know is there anything worng am doing or more info on this error.
    its urgent and help on this is apperocated
    Cheers
    Arun

    Hi Everyone,
    The error is related to Kernel, Just get rid of all this and try updating the kernel to the latest one.
    The db error is not seen again at the step where the installation was stopped.
    Also, this error is at the step of updtaing sapview.tsk when you use wrong kernel & this get conflicted to the DB which is of not the version to be. So simple if your DBload step is in sucess & kernel is outdated sync to the lates one.
    Then reatart the Sapmmc, login with SAP*- 06071992 & DDIC - 19920706, hope u know the rest:>
    Rate the forum
    Thanks & Regards,
    Chetan Poojary.

  • Why is the installer stuck on "Checking System Profile-"?

    I'm trying to install Flash Catalyst Beta on a MacBook Pro running OS 10.6.1 (Snow Leopard).
    The installer starts to work, but then it stops at the point where it checks the system profile (see attached screenshot). It doesn't seem to have crashed as the dock icon allows me to quit without force quitting the application.
    I've tried it in my regular user account and the administrator account, but the behaviour is identical.
    Any help would be appreciated.

    I appreciate all your efforts, but I¹ve just received my new copy of CS5, so
    I¹ll be installing the final version.
    G
    From: ritesh kapoor <[email protected]>
    Reply-To: <[email protected]>
    Date: Thu, 29 Apr 2010 04:32:06 -0600
    To: Gary Horsman <[email protected]>
    Subject: Why is the installer stuck on "Checking System
    Profile…"?
    Thanks Gary.
    I need to ask you a few questions and request you to perform some more steps
    so that I can debug your problem.
    1. Have you modified any folder permissions, authorization setup using
    Keychain Access utility (or any other tool)?
    2. Open a Terminal window, and run the command 'ls -l /tmp' and copy-paste
    the output printed on your screen in your reply.
    3. Delete all files whose name start with 'asu' in your /tmp folder. Run the
    command 'rm -rf /tmp/asu*'. Restart your machine.
    4. Launch the Flash Catalyst setup and check if installation proceeds
    successfully. If it doesn't, proceed to the step below.
    5. Open the folder containing the Flash Catalyst setup. Browse to the
    'packages' folder and rename the file 'install.sig' to 'update.sig'. Double
    click and launch the Flash Catalyst setup. This will not install the
    application but install the Adobe Application Manager. Let me know if you
    see a small dialog with a progress bar. Rename back update.sig to
    install.sig. Update us your observations. Continue to next step.
    6. Launch 'Disk Utility' app (from /Applications/Utilities). Select your OS
    partition in the left panel and click on 'First Aid' tab on the top. Click
    on the 'Repair Disk Permissions' button at the bottom.
    7. Again, launch the Flash Catalyst setup and check if installation proceeds
    successfully. If it doesn't, proceed to the step below.
    8. Open a Terminal window and navigate to the directory containing the Flash
    Catalyst setup. Run the command 'sudo Install.app/Contents/MacOS/Install'
    and enter the password. Let me know if the installer launches and on
    following the screen instructions do you still see the error screen or does
    the installation proceed successfully.

  • "System copy stops in "check DDIC password"  step

    Hi,
    We performed a combined upgrade/unicode conversion to ECC5.0 Non-Unicode to ECC 6.0 Unicode ( Windows 2003 Server, Oracle 10gR2 ).
    But at the end of import ( using R3load tool ), the import stops at "check DDIC password"  step  with error message :
    "Test logon to SAP System D12 failed.
    SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
    We checked the system, it's online , and the user DDIC exists. But we could not logon using sapgui. it gives message :
    "Programm SAPMS380 not found"
    If any one could help
    thank you
    Pascal
    file sapinst_dev.log :
    TRACE      2008-10-06 12:14:06.741
    Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
    TRACE      2008-10-06 12:13:39.460 [iaxxclogintimeout.cpp:92]
               CLoginTimeout::run()
    Login in progress
    TRACE      2008-10-06 12:13:39.460
    Connection request to guiengine backend by host 10.90.150.140
    TRACE      2008-10-06 12:13:39.460 [iaxxgenimp.cpp:471]
               CGuiEngineImp::showDialog()
    showing dlg diProductChoice
    TRACE      2008-10-06 12:13:39.475 [iaxxgenimp.cpp:490]
               CGuiEngineImp::showDialog()
    <dialog sid="diProductChoice">
    <title>Welcome to SAP Installation Master</title>
    <dialog/>
    TRACE      2008-10-06 12:13:39.522
    Protocol version is 3.1
    TRACE      2008-10-06 12:13:39.522
    Send connect information
    TRACE      2008-10-06 12:13:39.522
    client logged on
    TRACE      2008-10-06 12:13:39.803 [iaxxgenimp.cpp:1255]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    TRACE      2008-10-06 12:14:03.131 [iaxxdlghnd.cpp:96]
               CDialogHandler::doHandleDoc()
    CDialogHandler: ACTION_NEXT requested
    TRACE      2008-10-06 12:14:03.131 [iaxxcdialogdoc.cpp:212]
               CDialogDocument::submit()
    <dialog sid="diProductChoice">
    <dialog/>
    INFO       2008-10-06 12:14:03.147 [synxcpath.cpp:776]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
    INFO       2008-10-06 12:14:03.147 [synxcfile.cpp:177]
               CSyFileImpl::remove()
    Removing file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
    TRACE      2008-10-06 12:14:03.209 [iaxxgenimp.cpp:471]
               CGuiEngineImp::showDialog()
    showing dlg diRestartOrCancel
    TRACE      2008-10-06 12:14:03.209 [iaxxgenimp.cpp:490]
               CGuiEngineImp::showDialog()
    <dialog sid="diRestartOrCancel">
    Dialog does not contain standard input handler, so the backend is not able to generate a log entry
    <dialog/>
    TRACE      2008-10-06 12:14:03.209 [iaxxgenimp.cpp:1255]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    TRACE      2008-10-06 12:14:05.522
    current working directory is C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/
    INFO       2008-10-06 12:14:05.522 [synxcpath.cpp:776]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\x.
    INFO       2008-10-06 12:14:05.522 [synxcfile.cpp:177]
               CSyFileImpl::remove()
    Removing file C:\Program Files\sapinst_instdir\x.
    TRACE      2008-10-06 12:14:06.553
    Running with toplevel file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//toplevel.xml
    TRACE      2008-10-06 12:14:06.741
    Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
    TRACE      2008-10-06 12:14:06.741
    Running with dialog file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//dialog.xml
    TRACE      2008-10-06 12:14:06.881
    Running with keydb file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//keydb.xml
    TRACE      2008-10-06 12:14:07.194 [synxcfile.cpp:339]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml
    INFO       2008-10-06 12:14:07.209 [synxcfile.cpp:493]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml'.
    TRACE      2008-10-06 12:14:08.709 [synxcfile.cpp:339]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml
    INFO       2008-10-06 12:14:08.725 [synxcfile.cpp:493]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml'.
    TRACE      2008-10-06 12:14:17.928
    SAPinst was started using commandline: G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214\sapinst.exe
    TRACE      2008-10-06 12:14:17.928
    SAPinst properties are :
    GUISERVER_DIALOG_PORT=21212
    GUISERVER_HTTP_PORT=4239
    SAPINST_CONTROL_URL=control.xml
    SAPINST_DIALOG_PORT=21200
    SAPINST_DIALOG_URL=dialog.xml
    SAPINST_EXE=SAPINST_EXE
    SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,SMDAgent
    SAPINST_KEYDB_URL=keydb.xml
    SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
    SAPINST_MESSAGE_URL=.
    SAPINST_PACKAGES_URL=packages.xml
    SAPINST_RESOURCE_URL=resourcepool.xml
    SAPINST_SAVE_INPUT=true
    SAPINST_SCAN_DEVICES=false
    SAPINST_SKIP_DIALOGS=false
    SAPINST_TOPLEVEL_URL=toplevel.xml
    SAPINST_USE_ADVANCED_JS_HANDLING=true
    TRACE      2008-10-06 12:14:17.959 [iaxxclib.cpp:188]
               CLib::load()
    Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaejs701.dll
    TRACE      2008-10-06 12:14:18.69 [iaxxclib.cpp:188]
               CLib::load()
    Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iacdlib701.dll
    TRACE      2008-10-06 12:14:18.162 [iaxxclib.cpp:188]
               CLib::load()
    Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaccdlib.dll
    WARNING    2008-10-06 12:14:18.162 [synxcpath.cpp:912]
               CSyPath::getOSNodeType(bool )
    Unable to get information about path
    LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.
    TRACE      2008-10-06 12:14:18.225 [iaxxclib.cpp:188]
               CLib::load()
    Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iapasswdman701.dll
    TRACE      2008-10-06 12:14:18.225
    This is SAPinst, version 701, make variant 700_REL, build 967243
    compiled on Mar  7 2008, 01:01:19
    TRACE      2008-10-06 12:14:18.350 [synxcaccmg.cpp:640]
               CSyADsPath::fromString(ONEPNET\d12adm)
    Account ONEPNET/d12adm has ADS path 'WinNT://ONEPNET/d12adm'
    TRACE      2008-10-06 12:14:18.428 [synxcaccnt.cpp:967]
               iastring CSyAccountImpl::getSID(IUnknown* pUnk) const
    d12adm has SID S-1-5-21-770850386-355409785-620655208-35637
    TRACE      2008-10-06 12:14:20.678 [synxcuser.cpp:1076]
               CSyUserImpl::isExistingOnOS()
    existence check for user d12adm returned true.
    TRACE      2008-10-06 12:14:20.678 [syxxccache.cpp:208]
               CSyAccountCache::getUserImpl(name="ONEPNET\d12adm", sid="", create=false, ISyProgressObserver* )
    inserted account (d12adm, S-1-5-21-770850386-355409785-620655208-35637, USER) into the accountcache.
    TRACE      2008-10-06 12:14:20.678 [syxxsyshlp.cpp:175]
               syslib::logSystemState()
    Process environment
    ===================
    Environment Variables
    =====================
       = C:=C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
       = G:=G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214
       = J:=J:\Install_ECC6_64_uni\BS_2005_SR3_SAP_Installation_Master\IM_WINDOWS_X86_64
      ALLUSERSPROFILE = C:\Documents and Settings\All Users
      APPDATA = C:\Documents and Settings\d12adm\Application Data
      CLIENTNAME = TAL-MOBILE
      ClusterLog = C:\WINDOWS\Cluster\cluster.log
      CommonProgramFiles = C:\Program Files\Common Files
      CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
      COMPUTERNAME = SAPRH-PROD1
      ComSpec = C:\WINDOWS\system32\cmd.exe
      DBMS_TYPE = ora
      dbs_ora_schema = SAPSR3
      dbs_ora_tnsname = D12
      FP_NO_HOST_CHECK = NO
      HOMEDRIVE = C:
      HOMEPATH = \Documents and Settings\d12adm
      JAVA_HOME = C:\Program Files (x86)\Java\j2re1.4.2_09
      LOGONSERVER =
    CDBOUREGREG
      NLS_LANG = AMERICAN_AMERICA.UTF8
      NUMBER_OF_PROCESSORS = 8
      ORACLE_HOME = D:\oracle\D12\102
      ORACLE_SID = D12
      OS = Windows_NT
      Path = D:\oracle\D12\102\bin;C:\Program Files (x86)\Java\j2re1.4.2_09\bin;C:\Program Files (x86)\EMC\PowerPath\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;G:\usr\sap\D12\SYS\exe\uc\NTAMD64
      PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
      PERL5LIB = D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64-multi-thread;D:\oracle\D12\102\perl\5.8.3\lib;D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64;D:\oracle\D12\102\perl\site\5.8.3;D:\oracle\D12\102\perl\site\5.8.3\lib;D:\oracle\D12\102\sysman\admin\scripts;
      PROCESSOR_ARCHITECTURE = AMD64
      PROCESSOR_IDENTIFIER = EM64T Family 6 Model 15 Stepping 11, GenuineIntel
      PROCESSOR_LEVEL = 6
      PROCESSOR_REVISION = 0f0b
      ProgramFiles = C:\Program Files
      ProgramFiles(x86) = C:\Program Files (x86)
      SAPDATA_HOME = I:\oracle\D12
      SAPEXE = G:\usr\sap\D12\SYS\exe\uc\NTAMD64
      SAPINST_EXEDIR_CD = J:/Install_ECC6_64_uni/BS_2005_SR3_SAP_Installation_Master/IM_WINDOWS_X86_64
      SAPLOCALHOST = saprh-prod1
      SAPSYSTEMNAME = D12
      SESSIONNAME = RDP-Tcp#1
      SystemDrive = C:
      SystemRoot = C:\WINDOWS
      TEMP = G:\usr\sap\D12\tmp\1
      TMP = G:\usr\sap\D12\tmp\1
      TNS_ADMIN = G:\usr\sap\D12\SYS\profile\oracle
      USERDNSDOMAIN = ONEPNET.INTRA
      USERDOMAIN = ONEPNET
      USERNAME = d12adm
      USERPROFILE = C:\Documents and Settings\d12adm
      windir = C:\WINDOWS
    User: ONEPNET\d12adm, Id: S-1-5-21-770850386-355409785-620655208-35637
    Working directory: C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
    TRACE      2008-10-06 12:14:20.678 [syxxsyshlp.cpp:185]
               syslib::logSystemState()
    System information
    ==================
    OS version, host name: Microsoft Windows [Version 5.2.3790 Service Pack 2] SAPRH-PROD1
    RAM size (MB): 12287
    Swap size (MB): 21708.6
    TRACE      2008-10-06 12:14:20.709
    Running with control file control.xml version=701 changelist=33819 product-id=d0e28628
    TRACE      2008-10-06 12:14:20.709
    Selected Service NW_ABAP_OneHost|ind|ind|ind|ind
    TRACE      2008-10-06 12:14:20.709 [synxcfile.cpp:339]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml
    INFO       2008-10-06 12:14:20.709 [synxcfile.cpp:493]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml'.
    INFO       2008-10-06 12:14:20.959 [sixxcstepexecute.cpp:387]
    Execute step
    Component  W2K_ServicePack_Check|ind|ind|ind|ind
    Preprocess  of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
    TRACE      2008-10-06 12:14:29.428
    Java script statistics: ScriptSize 4788012 CompileTimeInSeconds 8.437
    TRACE      2008-10-06 12:14:29.459 [iaxxclib.cpp:188]
               CLib::load()
    Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iajsmod.dll
    TRACE      2008-10-06 12:14:29.537 [iaxxclib.cpp:188]
               CLib::load()
    Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodos.dll
    TRACE      2008-10-06 12:14:29.569 [synxccuren.cpp:1115]
               CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
    effective user corresponds to real user
    TRACE      2008-10-06 12:14:29.584
      Call block:W2K_ServicePack_Check_ind_ind_ind_ind
        function:W2K_ServicePack_Check_ind_ind_ind_ind_Preprocess
    is validator: false
    TRACE      2008-10-06 12:14:29.834
    Status of Step |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password is not OK. Re execute only that step and go on in RESTART mode.
    TRACE      2008-10-06 12:14:29.991 [synxcfile.cpp:339]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml
    INFO       2008-10-06 12:14:29.991 [synxcfile.cpp:493]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml'.
    TRACE      2008-10-06 12:14:30.131 [synxcfile.cpp:339]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml
    INFO       2008-10-06 12:14:30.147 [synxcfile.cpp:493]
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml'.
    INFO       2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:781]
    Execute step checkDDIC000Password of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0
    TRACE      2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:850]
    Execution of preprocess block of |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password returns TRUE.
    TRACE      2008-10-06 12:14:30.272 [synxccuren.cpp:1115]
               CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
    effective user corresponds to real user
    TRACE      2008-10-06 12:14:30.272
      Call block:NW_DDIC_Password_ind_ind_ind_ind
        function:NW_DDIC_Password_ind_ind_ind_ind_SubComponentContainer_checkDDIC000Password
    is validator: false
    TRACE      2008-10-06 12:14:30.272
    2008-10-06 12:14:30.272 NWInstance.byNumber(00, saprh-prod1)
    TRACE      2008-10-06 12:14:30.272
    2008-10-06 12:14:30.272 NWInstanceInstall.find(
    function (instance) {
        return instance.getNumber() == number && instance.getHostName().equals(host);
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWInstanceInstall._fromRow()
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWCentralInstanceInstall()
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWCentralInstance()
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWDialogInstance()
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWJavaInstance()
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWJavaInstance() done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWDialogInstance() done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWCentralInstance() done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWDialogInstanceInstall()
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWJavaInstanceInstall()
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWJavaInstanceInstall() done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWDialogInstance()
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWJavaInstance()
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWJavaInstance() done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWDialogInstance() done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWInstanceInstall()
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWInstanceInstall() done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWDialogInstanceInstall() done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWCentralInstanceInstall() done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWInstanceInstall._fromRow() done
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWInstanceInstall.find() done: 1 instances found
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWInstall.getSystem(D12)
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NWInstall()
    TRACE      2008-10-06 12:14:30.287
    2008-10-06 12:14:30.287 NW()
    TRACE      2008-10-06 12:14:30.319
    2008-10-06 12:14:30.319 NW() done
    TRACE      2008-10-06 12:14:30.319
    2008-10-06 12:14:30.319 NWInstall() done
    TRACE      2008-10-06 12:14:30.319
    2008-10-06 12:14:30.319 NWInstall.getSystem() done
    TRACE      2008-10-06 12:14:30.319
    2008-10-06 12:14:30.319 NWUsers(D12)
    TRACE      2008-10-06 12:14:30.319
    t_NW_users.updateRow(, WHERE sid='D12'), updating
    TRACE      2008-10-06 12:14:30.319
    2008-10-06 12:14:30.319 NWUsers() done
    TRACE      2008-10-06 12:14:30.319
    2008-10-06 12:14:30.319 NWUsers.getAccountData(DDIC.000)
    TRACE      2008-10-06 12:14:30.319
    2008-10-06 12:14:30.319 NWUsers.haveAccountData(DDIC.000)
    TRACE      2008-10-06 12:14:30.319
    2008-10-06 12:14:30.319 NWUsers.haveAccountData() done: true
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.319 NWUsers._readAccountData(DDIC.000)
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWUsers._isSystemRead() done: false
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWUsers._readAccountData() done
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWUsers.getMasterPassword()
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWUsers.getMasterPassword() done: XXXXX (master password is set)
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWUsers.getAccountData():
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWDialogInstance.getRFCUser(DDIC.000)
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWUsers.getAccountData(DDIC.000)
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWUsers.haveAccountData(DDIC.000)
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWUsers.haveAccountData() done: true
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWUsers._readAccountData(DDIC.000)
    TRACE      2008-10-06 12:14:30.334
    2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
    TRACE      2008-10-06 12:14:30.350
    2008-10-06 12:14:30.350 NWUsers._isSystemRead() done: false
    TRACE      2008-10-06 12:14:30.350
    2008-10-06 12:14:30.350 NWUsers._readAccountData() done
    TRACE      2008-10-06 12:14:30.350
    2008-10-06 12:14:30.350 NWUsers.getMasterPassword()
    TRACE      2008-10-06 12:14:30.350
    2008-10-06 12:14:30.350 NWUsers.getMasterPassword() done: XXXXX (master password is set)
    TRACE      2008-10-06 12:14:30.350
    2008-10-06 12:14:30.350 NWUsers.getAccountData():
    TRACE      2008-10-06 12:14:30.350
    2008-10-06 12:14:30.350 NWDialogInstance.getRFCUser() done
    TRACE      2008-10-06 12:14:30.381 [syxxccuren.cpp:31]
               CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPPARAM700', const iastring & '1')
    Environment variable SAPPARAM700 set to value '1'.
    TRACE      2008-10-06 12:14:30.397 [iaxxctrace.cpp:42]
               CIaIcmAuth::traceInit()
    Initialized SAP trace: tf is now set.
    INFO       2008-10-06 12:14:30.412 [synxccuren.cpp:65]
               CSyCurrentProcessEnvironmentImpl::removeEnvironmentVariable(iastring)
    Removed environment variable SAPPARAM700 from current process environment.
    TRACE      2008-10-06 12:14:30.412 [iaxxbsapparam.cpp:68]
               CIaSAPParam::initializeDefaultValues_impl()
    Read default profile values from kernel.
    TRACE      2008-10-06 12:14:30.412 [iaxxclib.cpp:188]
               CLib::load()
    Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodapp.dll
    TRACE      2008-10-06 12:14:30.694 [iaxxclib.cpp:188]
               CLib::load()
    Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodrfc.dll
    INFO       2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter CLIENT set to value 000.
    INFO       2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter USER set to value DDIC.
    INFO       2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LCHECK set to value 1.
    INFO       2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter PCS set to value 1.
    INFO       2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LANG set to value EN.
    INFO       2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter ASHOST set to value saprh-prod1.
    INFO       2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter SYSNR set to value 00.
    INFO       2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:520]
               CAbRfcImpl::checkConnectInfo
    RFC connection information checked successfully.
    WARNING[E] 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:433]
               CAbRfcImpl::openRfcConn
    FRF-00007  Unable to open RFC connection.
    TRACE      2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:434]
               CAbRfcImpl::openRfcConn
    Failed to open RFC connection
    TRACE      2008-10-06 12:14:31.084 [iaxxrfcimp.cpp:436]
               CAbRfcImpl::openRfcConn
    Program SAPMSSY1                                 n
    INFO       2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter CLIENT set to value 000.
    INFO       2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter USER set to value DDIC.
    INFO       2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LCHECK set to value 1.
    INFO       2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter PCS set to value 1.
    INFO       2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LANG set to value EN.
    INFO       2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter ASHOST set to value saprh-prod1.
    INFO       2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter SYSNR set to value 00.
    INFO       2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:520]
               CAbRfcImpl::checkConnectInfo
    RFC connection information checked successfully.
    WARNING[E] 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:433]
               CAbRfcImpl::openRfcConn
    FRF-00007  Unable to open RFC connection.
    TRACE      2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:434]
               CAbRfcImpl::openRfcConn
    Failed to open RFC connection
    TRACE      2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:436]
               CAbRfcImpl::openRfcConn
    Program SAPMSSY1                                 n
    TRACE      2008-10-06 12:14:31.178 [iaxxgenimp.cpp:752]
                CGuiEngineImp::showMessageBox
    <html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
    TRACE      2008-10-06 12:14:31.178 [iaxxgenimp.cpp:1255]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    TRACE      2008-10-06 12:21:33.957 [iaxxdlghnd.cpp:198]
               CDialogHandler::doHandleDoc()
    ACTION_OK received
    TRACE      2008-10-06 12:21:33.957
    2008-10-06 12:21:33.957 NWDialogInstance.getRFCUser(DDIC.000)
    TRACE      2008-10-06 12:21:33.957
    2008-10-06 12:21:33.957 NWUsers.getAccountData(DDIC.000)
    TRACE      2008-10-06 12:21:33.957
    2008-10-06 12:21:33.957 NWUsers.haveAccountData(DDIC.000)
    TRACE      2008-10-06 12:21:33.957
    2008-10-06 12:21:33.957 NWUsers.haveAccountData() done: true
    TRACE      2008-10-06 12:21:33.972
    2008-10-06 12:21:33.972 NWUsers._readAccountData(DDIC.000)
    TRACE      2008-10-06 12:21:33.972
    2008-10-06 12:21:33.972 NWUsers._isSystemRead(DDIC.000, rfc)
    TRACE      2008-10-06 12:21:33.972
    2008-10-06 12:21:33.972 NWUsers._isSystemRead() done: false
    TRACE      2008-10-06 12:21:33.972
    2008-10-06 12:21:33.972 NWUsers._readAccountData() done
    TRACE      2008-10-06 12:21:33.972
    2008-10-06 12:21:33.972 NWUsers.getMasterPassword()
    TRACE      2008-10-06 12:21:33.972
    2008-10-06 12:21:33.972 NWUsers.getMasterPassword() done: XXXXX (master password is set)
    TRACE      2008-10-06 12:21:33.972
    2008-10-06 12:21:33.972 NWUsers.getAccountData():
    TRACE      2008-10-06 12:21:33.972
    2008-10-06 12:21:33.972 NWDialogInstance.getRFCUser() done
    INFO       2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter CLIENT set to value 000.
    INFO       2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter USER set to value DDIC.
    INFO       2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LCHECK set to value 1.
    INFO       2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter PCS set to value 1.
    INFO       2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LANG set to value EN.
    INFO       2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter ASHOST set to value saprh-prod1.
    INFO       2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter SYSNR set to value 00.
    INFO       2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:520]
               CAbRfcImpl::checkConnectInfo
    RFC connection information checked successfully.
    WARNING[E] 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:433]
               CAbRfcImpl::openRfcConn
    FRF-00007  Unable to open RFC connection.
    TRACE      2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:434]
               CAbRfcImpl::openRfcConn
    Failed to open RFC connection
    TRACE      2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:436]
               CAbRfcImpl::openRfcConn
    Program SAPMSSY1                                 n
    INFO       2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter CLIENT set to value 000.
    INFO       2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter USER set to value DDIC.
    INFO       2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LCHECK set to value 1.
    INFO       2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter PCS set to value 1.
    INFO       2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LANG set to value EN.
    INFO       2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter ASHOST set to value saprh-prod1.
    INFO       2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter SYSNR set to value 00.
    INFO       2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:520]
               CAbRfcImpl::checkConnectInfo
    RFC connection information checked successfully.
    WARNING[E] 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:433]
               CAbRfcImpl::openRfcConn
    FRF-00007  Unable to open RFC connection.
    TRACE      2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:434]
               CAbRfcImpl::openRfcConn
    Failed to open RFC connection
    TRACE      2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:436]
               CAbRfcImpl::openRfcConn
    Program SAPMSSY1                                 n
    TRACE      2008-10-06 12:21:34.97 [iaxxgenimp.cpp:752]
                CGuiEngineImp::showMessageBox
    <html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
    TRACE      2008-10-06 12:21:34.97 [iaxxgenimp.cpp:1255]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    TRACE      2008-10-06 12:21:35.644 [iaxxdlghnd.cpp:198]
               CDialogHandler::doHandleDoc()
    ACTION_OK received
    TRACE      2008-10-06 12:21:35.644
    2008-10-06 12:21:35.644 NWDialogInstance.getRFCUser(DDIC.000)
    TRACE      2008-10-06 12:21:35.644
    2008-10-06 12:21:35.644 NWUsers.getAccountData(DDIC.000)
    TRACE      2008-10-06 12:21:35.644
    2008-10-06 12:21:35.644 NWUsers.haveAccountData(DDIC.000)
    TRACE      2008-10-06 12:21:35.644
    2008-10-06 12:21:35.644 NWUsers.haveAccountData() done: true
    TRACE      2008-10-06 12:21:35.660
    2008-10-06 12:21:35.660 NWUsers._readAccountData(DDIC.000)
    TRACE      2008-10-06 12:21:35.660
    2008-10-06 12:21:35.660 NWUsers._isSystemRead(DDIC.000, rfc)
    TRACE      2008-10-06 12:21:35.660
    2008-10-06 12:21:35.660 NWUsers._isSystemRead() done: false
    TRACE      2008-10-06 12:21:35.660
    2008-10-06 12:21:35.660 NWUsers._readAccountData() done
    TRACE      2008-10-06 12:21:35.660
    2008-10-06 12:21:35.660 NWUsers.getMasterPassword()
    TRACE      2008-10-06 12:21:35.660
    2008-10-06 12:21:35.660 NWUsers.getMasterPassword() done: XXXXX (master password is set)
    TRACE      2008-10-06 12:21:35.660
    2008-10-06 12:21:35.660 NWUsers.getAccountData():
    TRACE      2008-10-06 12:21:35.660
    2008-10-06 12:21:35.660 NWDialogInstance.getRFCUser() done
    INFO       2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter CLIENT set to value 000.
    INFO       2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter USER set to value DDIC.
    INFO       2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LCHECK set to value 1.
    INFO       2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter PCS set to value 1.
    INFO       2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LANG set to value EN.
    INFO       2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter ASHOST set to value saprh-prod1.
    INFO       2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter SYSNR set to value 00.
    INFO       2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:520]
               CAbRfcImpl::checkConnectInfo
    RFC connection information checked successfully.
    WARNING[E] 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:433]
               CAbRfcImpl::openRfcConn
    FRF-00007  Unable to open RFC connection.
    TRACE      2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:434]
               CAbRfcImpl::openRfcConn
    Failed to open RFC connection
    TRACE      2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:436]
               CAbRfcImpl::openRfcConn
    Program SAPMSSY1                                 n
    INFO       2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter CLIENT set to value 000.
    INFO       2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter USER set to value DDIC.
    INFO       2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LCHECK set to value 1.
    INFO       2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter PCS set to value 1.
    INFO       2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter LANG set to value EN.
    INFO       2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter ASHOST set to value saprh-prod1.
    INFO       2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
               CAbRfcImpl::setRfcConnectParam
    RFC parameter SYSNR set to value 00.
    INFO       2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:520]
               CAbRfcImpl::checkConnectInfo
    RFC connection information checked successfully.
    WARNING[E] 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:433]
               CAbRfcImpl::openRfcConn
    FRF-00007  Unable to open RFC connection.
    TRACE      2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:434]
               CAbRfcImpl::openRfcConn
    Failed to open RFC connection
    TRACE      2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:436]
               CAbRfcImpl::openRfcConn
    Program SAPMSSY1                                 n
    TRACE      2008-10-06 12:21:36.769 [iaxxgenimp.cpp:752]
                CGuiEngineImp::showMessageBox
    <html> <head> </head> <body> Test logon to SAP System D12 failed. <p> SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </p> </body></html>
    TRACE      2008-10-06 12:21:36.769 [iaxxgenimp.cpp:1255]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    TRACE      2008-10-06 12:44:40.278 [iaxxcnclhd.cpp:84]
               CCancelHandler::doHandleDoc(IDialogDocument * pDoc  )
    ACTION_CANCEL requested
    TRACE      2008-10-06 12:44:40.278 [iaxxgenimp.cpp:752]
                CGuiEngineImp::showMessageBox
    <html> <head> </head> <body> You are about to cancel the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System installation. <li> Choose one of the following: </li> <ul> <li> 'Continue' - to continue the installation. </li> <li> 'Stop' - to stop the installation and exit SAPinst. You can continue the installation later from this point<br>Note:<br>If you stop the installation after the installation activites have been started, do not use the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System, as it is not ready to be used. </li> </ul> </body></html>
    TRACE      2008-10-06 12:44:40.278 [iaxxgenimp.cpp:1255]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    INFO       2008-10-06 12:44:41.840 [synxcpath.cpp:776]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
    INFO       2008-10-06 12:44:42.074 [synxcpath.cpp:776]
               CSyPath::createFile()
    Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\__instana_tmp.xml.

    Hi,
    The possible problem for the DDIC user could be, once the data imported the password of the DDIC got reset to older password as in ECC5, try login the system with sap* user and reset the password of DDIC, then login  as DDIC user and set the password permannetly and retry the activity.
    If sap* also shows with same problem try changing the password of sap* from DB level by executing the query(you can find solutions for this in SDN forum threads, check them). or try deleting the user sap* and recreate where user gets creted wiuth default pasword  as "PASS" and logon and reset the user DDIC.
    Regards.

  • Check DDIC password

    Hi guys,
    During installation at phase 27 i received msg check ddic password .. i clicked on ok.. and installation continued..but now when i try to login using SAP* or DDIC it is not accepting.
    how to solve it..!!

    Hi,
    did you use default passwords
    DDIC - 19920706
    SAP* - 07071992
    Please look at this
    [Re: Check DDIC Password;
    [http://sap.ittoolbox.com/groups/technical-functional/sap-basis/check-ddic-password-2397340]
    Regards,
    Muralidhar

  • Stuch at the step " Check DDIC password "

    Hi,
    I go for system export/ import  throuh sapinst.
    sap ecc 6.0
    oracle
    red hat linux
    After making the export of system , then go for system import via .sapinst , I m stuck at step " Check DDIC password ".
    Even I m not be able to logon to system through sapgui.
    Following are the error logs :
    *==> sapinstdev.log <==*_
    TRACE      [iaxxbjsmod.cpp:719]
               CJSlibModule::showOkCancelBox_impl()
    <html>Test logon to SAP System REQ failed.<p>Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.</html>
    TRACE      [iaxxgenimp.cpp:1155]
               showDialog()
    waiting for an answer from gui
    sapinst_dev.log
    >TS> Tue Apr 13 11:50:18 2010
    T:46912508454944 Error in program 'sapinstexe': ======>      A:SY:002 Program SAPMSSY1                                 n
    >TS> Tue Apr 13 12:14:44 2010
    T:46912508454944 Error in program 'sapinstexe': ======> Connect to SAP gateway failed
    Connect_PM  GWHOST=isrecqa, GWSERV=sapgw00, SYSNR=00
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner '172.25.0.94:3300' not reached
    TIME        Tue Apr 13 12:14:44 2010
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2764
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       111
    ERRNO TEXT  Connection refused
    COUNTER     14
    T:46912508454944 Error in program 'sapinstexe': ======> Connect to SAP gateway failed
    Connect_PM  GWHOST=isrecqa, GWSERV=sapgw00, SYSNR=00
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner '172.25.0.94:3300' not reached
    TIME        Tue Apr 13 12:14:44 2010
    RELEASE     700
    COMPONENT   NI (network interface)
    Thanx,
    Amit

    Hi,
    We are running on Linux plateform, below is the required log ...
    isrecqa:reqadm 4> cat dev_disp
    trc file: "dev_disp.new", trc level: 1, release: "700"
    sysno      00
    sid        REQ
    systemid   390 (AMD/Intel x86_64 with Linux)
    relno      7000
    patchlevel 0
    patchno    236
    intno      20050900
    make:      single threaded, Unicode, 64 bit, optimized
    pid        24877
    Tue Apr 13 18:46:57 2010
    kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 24877) [dpxxdisp.c   1287]
            shared lib "dw_xml.so" version 236 successfully loaded
            shared lib "dw_xtc.so" version 236 successfully loaded
            shared lib "dw_stl.so" version 236 successfully loaded
            shared lib "dw_gui.so" version 236 successfully loaded
            shared lib "dw_mdm.so" version 236 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Tue Apr 13 18:47:17 2010
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0029.qqq.nxst) took 20 seconds
    Tue Apr 13 18:47:27 2010
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 10 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5521]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >isrecqa_REQ_00                          <
    DpShMCreate: sizeof(wp_adm)             22776   (1752)
    DpShMCreate: sizeof(tm_adm)             6009216 (29896)
    DpShMCreate: sizeof(wp_ca_adm)          28800   (96)
    DpShMCreate: sizeof(appc_ca_adm)        9600    (96)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
    DpShMCreate: sizeof(comm_adm)           548064  (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0       (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)           0       (72)
    DpShMCreate: sizeof(vmc_adm)            0       (2008)
    DpShMCreate: sizeof(wall_adm)           (40056/36728/80/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY             (addr: 0x2aaab589d000, size: 6704576)
    DpShMCreate: allocated sys_adm at 0x2aaab589d000
    DpShMCreate: allocated wp_adm at 0x2aaab589f310
    DpShMCreate: allocated tm_adm_list at 0x2aaab58a4c08
    DpShMCreate: allocated tm_adm at 0x2aaab58a4c68
    DpShMCreate: allocated wp_ca_adm at 0x2aaab5e5fde8
    DpShMCreate: allocated appc_ca_adm at 0x2aaab5e66e68
    DpShMCreate: allocated comm_adm at 0x2aaab5e693e8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0x2aaab5eef0c8
    DpShMCreate: allocated gw_adm at 0x2aaab5eef148
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0x2aaab5eef178
    DpShMCreate: allocated wall_adm at 0x2aaab5eef180
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    rdisp/queue_size_check_value :  -> off
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation map
    <EsMap> EsMapUnamFileMapInit: Initialize the memory 232 MB
    Linux: Kernel supports shared memory disclaiming
    Linux: using madvise(<pointer>, <size>, 9).
    Linux: disclaiming for shared memory enabled
    <ES> 57 blocks reserved for free list.
    ES initialized.
    mm.dump: set maximum dump mem to 96 MB
    Tue Apr 13 18:47:30 2010
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1694]
    ***LOG Q0K=> DpMsAttach, mscon ( isrecqa) [dpxxdisp.c   12650]
    DpStartStopMsg: send start message (myname is >isrecqa_REQ_00                          <)
    DpStartStopMsg: start msg sent
    Warning: Swap space is configured quite small with 16383 MB.
    It should be configured with at least 20 GB on 64 bit systems.
    See note 153641 for more information.
    Warning: tmpfs at /dev/shm is configured quite small with 1972 MB!
    Minimum value is 8192 MB.
    Recommended size is 75 % of RAM + swap.
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Tue Apr 13 18:47:31 2010
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 236
    Release check o.K.
    Tue Apr 13 18:47:32 2010
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    isrecqa:reqadm 5>
    Regards,
    Mushtaq

  • How to install BI content on a new Netweaver 2004s SR1 installation

    HI Friends,
    I have installed new NetWeaver 2004s SR1 on Windows 2003 server :oracle 10g as a central system.The installation was succesfull.
    How to install the BI content addon  in the system?(not installing business content objects). Please let me know if you have any guidance  for installing the BI content.
    Thanks
    mv_d

    im also facing the same problem. you got it solved? please do help me [email protected]

  • Netweaver 2004s Preview Installation Error - Any Help Appreciated.

    Trying to install the Netweaver 2004s Preview Edition.
    The following error (in the log file) occurs after pointing to the Java Cryptographic Extension Policy Archive (zip) file and clicking 'next'.
    ===============================================
    ERROR 2007-01-04 00:26:04
    FJS-00003  TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
    ERROR 2007-01-04 00:26:21
    FCO-00011  The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
    ===============================================
    Any help is appreciated.
    Rajendra.

    Hi,
        Drop me a mail to [email protected] I will send you the NW04s installation guide.
    regards,
    Ranjeet

  • "Check DDIC password" error

    when i was presented with the screen of DDIC password, i wrote the wrong one, so i now i have a mess with my passwords.
    I can access to the 000 client with SAP* and DDIC, the both of them are reseted to the default passwords, but i can't log on to the 001 client, the both users  (SAP* and DDIC) are locked, so i can't enter the sistem to reset them.
    Anyway, now i restart the installation and have this error:
    "Test logon to SAP System ALH failed.
    Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
    The sistem is running, both cients are in green!
    I tried to run the reports RSWBOINS and RADDBDIF as some guys on thi forum suggested, but no luck
    Any ideas??

    Go to database level and reset the password for SAP*  for client 001
    update <DB schema>.USR02 set UFLAG = 0 where MANDT = <client number> and BNAME = u2018SAP*u2019;
    With the above query you can unlock SAP* and if you know the password you are able to logon to that client.
    if still you do not able to logon to that client
    delete the User SAP* with below query
    delete from <DB schema>.USR02 where bname like 'SAP*' and MANDT like '001'
    than you can able to logon to that client with SAP* and use default password "pass".
    after that you can change the password for DDIC from SU01.
    This will help you.

  • SAP Netweaver 7.3 Installation stuck at import abap

    Hi all,
    I am trying to do a new installation of NW 7.3 by importing data from a system copy.
    At the phase "import ABAP" the installation gets an error on step 32 (or something like that), then it continues but at the last 2 jobs it seems stucked.
    Now I have this situation: running 1, waiting 1, completed 42, failed 1.
    I am new to this operation, can you please help me?
    In attach the import log and the error that is generated near step 32.

    Hi Luca
    Could you refer the SAP Notes for Sql error 1750, 4902 1088
      1752579 - SQL error 10011 Access denied
    1170869 - Duplicated primary keys during system copy via R3Load
    BR
    SS

  • Error with install Solution manager on step: check DDIC password.

    Iu2019m installing  SAP Solution Manager 7.0. ABAP and JAVA instance. OC SLES 10.2. БД Oracle 10.2, update 10.2.0.4. At step 28 out error:
    Test logon to SAP System UST failed.
    SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.
    Error of sapinst_dev.6.log
    WARNING[E] 2010-07-01 11:30:00.166 [iaxxrfcimp.cpp:433]
               CAbRfcImpl::openRfcConn
    FRF-00007  Unable to open RFC connection.
    TRACE      2010-07-01 11:30:00.167 [iaxxrfcimp.cpp:434]
               CAbRfcImpl::openRfcConn
    Failed to open RFC connection
    TRACE      2010-07-01 11:30:00.167 [iaxxrfcimp.cpp:436]
               CAbRfcImpl::openRfcConn
    DB-Error -          0
    Error of  /usr/sap/UST/DVEBMGS03/work/dev_rfc.trc
    u2026.
    ERROR file opened at 20100701 124301 YEKST, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
    T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner '10.10.8.240:3303' not reached
    I have tried to change password DDIC at 19920706. Error could not be fixed.  In the SAP GUI can connect SAP *. When Iu2019m trying to connect DDIC out  DB-Error u2013 0.

    suse102:/usr/sap/UST/DVEBMGS03/work # cat dev_rfc.trc
    ERROR file opened at 20060102 052456 YEKT, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
    T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner '10.10.8.240:3303' not reached
    TIME        Mon Jan  2 05:24:56 2006
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2764
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       111
    ERRNO TEXT  Connection refused
    COUNTER     2
    T:1115703616 ======> Connect to SAP gateway failed
    Connect_PM  TPNAME=IGS.UST, GWHOST=suse102, GWSERV=3303
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner '10.10.8.240:3303' not reached
    TIME        Mon Jan  2 05:24:56 2006
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2764
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       111
    ERRNO TEXT  Connection refused
    COUNTER     4
    ERROR file opened at 20100706 142541 YEKST, SAP-REL 700,0,48 RFC-VER 3 815142 MT-SL
    T:1115703616 ======> CPIC-CALL: 'SAP_CMNOREGTP'
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       service '/tmp/.sapstream40300' in use
    TIME        Tue Jul  6 14:25:41 2010
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -4
    MODULE      nixxi.cpp
    LINE        3148
    DETAIL      NiIBindSocket: could not delete file '/tmp/.sapstream40300'
                for hdl 2
    SYSTEM CALL unlink
    ERRNO       1
    ERRNO TEXT  Operation not permitted
    COUNTER     4
    T:1115703616 ======> Connect to SAP gateway failed
    Connect_PM  TPNAME=IGS.UST, GWHOST=suse102, GWSERV=3303
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner '10.10.8.240:3303' not reached
    TIME        Tue Jul  6 14:25:41 2010
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2764
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       111
    ERRNO TEXT  Connection refused
    COUNTER     6

  • Netweaver 2004s installation problem on Windows: Oracle 10G

    Hi Friends,
    I would like to install Netweaver 2004S(with usage types AS ABAP, AS JAVA, BI, BI JAVA, EP & DI) on a server which has Windows 2003 server OS running on it.
    The server has 6GB RAM and has 5GB of free space on C: and a free sapce  of 60GB on H: & 50GB on I: respectively.The database that is to be used is Oracle 10g.
    Do I need to install first SAP solution manger 4.0 on this or Can i proceed with Netweaver  2004 S installation???
    I am installing a central system.
    First I tried installing SAP solution manger 4.0 on this system and it went successfully. Now when i am installing Netweaver 2004s on the same machine, during installation I am asked whether to "install a MCOD or create a new database for this installation".
    I chose Install MCOD and proceeded  further with Installation. But my installation is taking a lot of time while executing the service :"Creating database schema". The message which i get on status bar is " Removing schema user SAPSR3" and the status remains the same.
    Have any of you faced this problem ? Please let me know how you have proceeded further.
    Before starting the installation  one of the prerequisites " SWAP SPACE VALUES" for installation was not satisfied by my system  and even then i proceeded with the installation.
    Is it because of this SWAP space problem , my intsallation is strcuk?? or what could be the reason fo this?
    Thanks
    Diwakar

    Hello Diwakar, 
    If you are just installing NW2004s then it is not mandatory to install Solution manager.
    To increase the swap space --
    Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change
    you canIncrease swap space/page file here.
    Do not install the system as MCOD, make the seperate database.
    Do revert for further doubt.
    Best Regards,
    Sachin.

  • Installation stuck at Create database schema Phase 13 of 27

    Hi
    I am installing the Netweaver 7.01 SP3 and have already removed it completely after getting stuck at the same installation step. Do not know what is going wrong. A small extract of the log is shown below. Any advice on how to proceed will be helpful. I know when einstalling it has to be removed completely which I did using uninstallation and then clean up tool. But again it is stooping at the same step. I had let it run more almost two days but of no use. My system configuration is good enough with 2GB RAM etc.
    INFO       2009-03-12 16:52:00.443 [synxcpath.cpp:807]
               CSyPath::createDirectory()
    Creating directory C:\sapdb.
    INFO       2009-03-12 16:52:00.458 [synxcpath.cpp:807]
               CSyPath::createDirectory()
    Creating directory C:\sapdb\NSP.
    INFO       2009-03-12 16:52:00.458 [synxcpath.cpp:807]
               CSyPath::createDirectory()
    Creating directory C:\sapdb\NSP\saplog.
    INFO       2009-03-12 16:52:00.474 [synxcpath.cpp:807]
               CSyPath::createDirectory()
    Creating directory E:\sapdb\NSP\sapdata.
    INFO       2009-03-12 16:52:01.67 [sixxcstepexecute.cpp:790]
    Execute step sdb_create_db_instance of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
    File sapdb.inf does exist. Will use the commands in file sapdb.inf.
    INFO       2009-03-12 16:52:06.544 [sixxcstepexecute.cpp:790]
    Execute step sdb_init_instance_type of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0
    INFO       2009-03-12 17:12:38.722 [sixxcstepexecute.cpp:790]
    Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    INFO       2009-03-12 17:12:39.883 [sixxcstepexecute.cpp:790]
    Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    Also see log browser from the installation window............................
    Please see below as it is geeting stuck at
    component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
    Mar 12, 2009 5:12:35 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 &gt; SAP Application Server ABAP &gt; MaxDB &gt; Central System &gt; Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component  current="true"><![CDATA[Create users for SAP system]]></component><component  current="true"><![CDATA[Install common system files]]></component><component  current="true"><![CDATA[Unpack SAP archives]]></component><component  current="true"><![CDATA[Install SAP Cryptographic component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="99" total="216"/>
    <button sid="btPREV" default="false" enabled="false" ><caption>&lt; &amp;Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&amp;Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
    Mar 12, 2009 5:12:35 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog sid="diProgress" progress="true" windowtitle="SAPinst [Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="100" total="216"/>
    <button sid="btPREV" default="false" enabled="false" >
    vtaneja2@skumar278-1: SAP NetWeaver 7.0 SR1 including Enhancement Package 1 &gt; SAP Application Server ABAP &gt; MaxDB &gt; Central System &gt; Central System"><title>Task Progress</title><description>Task is running</description><status><![CDATA[]]></status><component  CDATA[Prepare database schema for ABAP]]></component><component  current="true"><![CDATA[Create database schema]]></component><component ><![CDATA[Create sequence for the ABAP user]]></component><component ><![CDATA[Setup database connection for user SKUMAR278-1\nspadm]]></component><component ><![CDATA[Setup database connection for user skumar278-1\SAPServiceNSP]]></component><component ><![CDATA[Perform MaxDB pre-load activities]]></component><component ><![CDATA[Import ABAP]]></component><component ><![CDATA[Post load activities]]></component><component ><![CDATA[Perform MaxDB post-load activities]]></component><component ><![CDATA[Import MaxDB statistics]]></component><component ><![CDATA[Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="104" total="216"/>
      [Install central instance]]></component><component ><![CDATA[Start central services instance]]></component><component ><![CDATA[Start instance]]></component><component ><![CDATA[ABAP post installation activities]]></component><component ><![CDATA[Check DDIC password]]></component><component ><![CDATA[Run ABAP Reports]]></component><currentprogress current="105" total="216"/>
    <button sid="btPREV" default="false" enabled="false" ><caption>&lt; &amp;Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" enabled="false" ><caption>&amp;Next</caption><action sendValuesBack="false">ACTION_NEXT</action><tooltiphelp></tooltiphelp></button></dialog></sapinstgui>
    Mar 12, 2009 5:12:39 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><update><updateitem><dialogstatus><![CDATA[ ]]></dialogstatus></updateitem></update></sapinstgui>
    Mar 12, 2009 5:38:16 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog severity="FLOW TRACE" filename="" version="1.0"/>
    Mar 12, 2009 5:38:16 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[SAPinstCommLink,5,main]]: Received: <?xml version="1.0" encoding="UTF-8"?><sapinstlog version="1.0" append="false" filename="C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\sapinst_dev.log"/>
    Mar 12, 2009 5:43:59 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
    Mar 12, 2009 6:08:17 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
    Mar 12, 2009 6:30:31 PM [Info]:                                                  com.sap.sdt.sapinst.rapi.connector.SAPinstConnector [Thread[AWT-EventQueue-0,6,main]]: Sent: <?xml version="1.0"?><sapinstlog logoff="true" filename="" version="1.0"/>
    Thanks in advance
    Vikas

    Guess you are talking about sapinst.log file. Below are the last few lines after which it did not proceed
    Do see the last step create DB schema....... The previos log was from sapinst_dev.log 
    Oliver I have a doubt could it be becuase of the host name.
    The host name of my machine is "skumar278-1" with DNS domain name for SAP system "asiapac.globalcsc.net"
    Could this be the reason for the problem i am facing i.e installation getting stuck at phase 13 Create DB schema.... Other than this I cannot see anything else which can go wrong.. Do have the DHCP server available..
    The page file as per the ram settings i.e for 2 GB should be 3072 so I have set it to the same. Though
    the prerequisite page shows
    "For the selected services at least 7138 MB swap space are recommended. Current value: 2851 MB. (Updated 2005-06-24)"
    Can this be the reason???
    Also I just looked at the services file.. there are about about 4-5 different files with the name services .3 services.4 ...  services.5 etc als there is no entry for port 3900 3600 & 8000.. .. do not know what to do... Please suggest..
    INFO 2009-03-12 17:12:35.412
    Execute step CheckDbExistence of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    INFO 2009-03-12 17:12:35.726
    Execute step check_dbm_dba_user_passwd of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    INFO 2009-03-12 17:12:37.718
    Execute step StartDb of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    INFO 2009-03-12 17:12:38.722
    Execute step CheckDBUnicode of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0
    INFO 2009-03-12 17:12:39.883
    Execute step CreateDbSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Dialogs|ind|ind|ind|ind|5|0|Sdb_Schema|ind|ind|ind|ind|1|0

  • Installation Stuck in ABAP load phase due to MAXDB slow Performance

    Hello,
    We are installing ERP2005 on solaris 10 with MAXDB7.6 with build 35. During installtaion the Import ABAP phase stucks and running for a  so long time. As per the note SAPNOTE :848436 we have been trying to execute the statment
    CHECK TABLE "/MAXDB/INDEXSTATEMENTS" WITH LONG CHECK.
    which may free up the load for installation.
    But we are unable to execute the above SQL statement.
    It is very urgent since we are not able to complete the installation from past  3 days....
    Could you please some one able to help us to finish the installation. I am very
    much greatful to you all..
    Regards,
    Sankaranarayanan.G
    SAPBASISCONSULTANT

    Hello Mona,
    -> Please create next time your own thread, where your problem reported.
    -> The SAP note 848436 is only released internally.
         You now have to use the following installation guide:                   
             Installation Guide - SAP NetWeaver 2004s <SR1 or SR2> <Technology> on   
             <your OS>: MaxDB                                                        
         You can find this guide on SAP Service Marketplace at:                  
    http://service.sap.com/installnw2004s   > Installation - SAP NetWeaver  
    Systems   > SAP NetWeaver 2004s <SR1 or SR2> - Installation Guides.     
                        Also see the following SAP Notes:                                       
    919177 Inst. SAP NetWeaver 2004s SR1 Installation on UNIX: MaxDB        
    967741 Inst: SAP NW 2004s SR2 & SAP BS 2005 SR2 Inst. on UNIX: MaxDB    
    -> Please see the note 967741 & check the current value of the database parameter
        SHAREDSQL.
    -> Please clarify your last input in this thread:
          "ran the above query using SAP<SID>, but it didn't change anything."
           What query did you run?
         "Ok... I increased values in SID_sapdb_db_parameter.txt and it worked."
          What database parameters did you change?
          Please review the SAP note::
           814704     MaxDB Version 7.6 parameter settings for OLTP/BW
    Thank you and best regards, Natalia Khlopina

Maybe you are looking for