Netweaver 2004s Preview Installation Error - Any Help Appreciated.
Trying to install the Netweaver 2004s Preview Edition.
The following error (in the log file) occurs after pointing to the Java Cryptographic Extension Policy Archive (zip) file and clicking 'next'.
===============================================
ERROR 2007-01-04 00:26:04
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-04 00:26:21
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
===============================================
Any help is appreciated.
Rajendra.
Hi,
Drop me a mail to [email protected] I will send you the NW04s installation guide.
regards,
Ranjeet
Similar Messages
-
When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
When I attempt to connect to iTunes Store, I receive the following error message: An unknown error has occurred (0x80090318). Any help appreciated!
Hey there Dan256162,
I understand that you are receiving a specific error code when attempting to connect to the iTunes Store, error 0x80090318. I have an article for you that references this code and links you to another article for troubleshooting to address this issue. Here is the article that references the error code:
iTunes: Possible iTunes Store errors - Apple Support
http://support.apple.com/en-us/HT203174
And here is the linked troubleshooting article that will help you resolve the issue:
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
http://support.apple.com/en-us/TS4123
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
What can I do to get Adobe to download a pdf file it has converted into a doc or docx file? Any help appreciated!
Hi Ebbelby,
You're welcome!
Happy to help
Regards,
Rahul -
I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up.
Desperately need help please... Any help appreciated
ThankyouIf you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
Hi, I have a sign being advised Power PC Applications no longer supported when I try to go into Microsoft Word, Excel, Entourage & MSN Messenger, hoe do I resolve this? Any help appreciated Sorry, this is for a Mac Air
Most versions of Office 2008 use an Universal installer. A few have one which is PowerPC-only.
In any case, Mac OS X Server 10.6 can be run in emulation, and Rosetta applications can be run in it. Saying that PowerPC-only applications won't run in Mac OS X 10.7 is correct. Saying that they won't run on a Mac which shipped with Mac OS X 10.7 is not.
(66375) -
im trying to install itunes on windows vista sony vaio. It goes through the whole process then says administrator has settings to prevent this installation. Any help would be great
Try the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems -
Urgent help needed.....any help appreciated....
q, Design and implement a java class called statistics that computes the mean, median, standard deviation. Design and implement a java application called statisticsDriver that generates a list of 50 integers (generated randomly) and prints the statistical measures which are calculated using the Statistis Class. Assume there will be no more then 50 input values. Compute all statical values as floating values.
The above was the question, and below is what i have done so far for the mean part, but it seems to have errors, any help???
p.s I am also confused what it means by driver class, and do i have to do individual classes for the different statistical measures....please helppppp !!!!!!!!!!, any help would be appreciated...thanks.
The class say Mean contains the following method:
public static double mean(double[] data)
double sum=0.0;
for (int index=0; index sum=sum+data[index];
sum=sum/data.length;
return sum;
The driver for this class:
public static void main(java.lang.String[] args) {
double[] myData={2,5,4,6,7,13};
System.out.println("The mean of myData");
System.out.println(Mena.mean(myData));This is my method to work out the mean,median and mode of a set of numbers.
But what i need to do is find the mean, median and mode from a driver class, which generates a list of random numbers, no more then 50. I don't know where to fit this in my method...please help!!!!!!
main:
public static void main(String[] args) {
int[] mainArray = {2,3,6,6,6};
//outputArray( "Original Array: ",mainArray );
System.out.println("average is " + mean( mainArray ));
System.out.println("median is " + median( mainArray ));
System.out.println("mode is " + mode( mainArray ));
//mean
public static double mean(int[] mainArray) {
int sum = 0;
for (int i = 0; i < mainArray.length; i++) {
sum = sum + mainArray;
double average = sum / mainArray.length;
return average;
//median
public static int median(int[] mainArray) {
//double sortList = sort(mainArray);
final int EVEN_NUMBER_OF_ELEMENTS = 0;
int result = mainArray.length % 2;
int median = 0;
// Definition: Median is the Middle number in an odd number of entries array
// Median is the avg of the two number in the center of an even number array
if (result == EVEN_NUMBER_OF_ELEMENTS) {
int rightNumber = mainArray.length / 2;
int leftNumber = rightNumber - 1;
median = (mainArray[rightNumber] + mainArray[leftNumber]) / 2;
else { // Odd number of items, choose the center one
int rightNumber = mainArray.length / 2;
median = mainArray[rightNumber];
return median;
//mode
public static double mode(int[] mainArray)
int mode = 0;
int elements = 0;
int tempMode = mainArray[0];
int temp = 1;
int x;
for( x = 1; x < mainArray.length; x++)
if(mainArray[x-1] == mainArray[x])
temp++;
else
if(temp > elements)
tempMode = mainArray[x-1];
elements = temp;
temp = 1;
else
temp = 1;
if (temp> elements)
tempMode = mainArray[x-1];
mode = tempMode;
return mode;
any help appreciated.. -
Hi, I have bought a later os from app store but am unable to download it, any help appreciated.
Hi, I have bought a later os from app store but am unable to download it, any help appreciated.
I am using 10.6.8 at the moment and have purchased 10.8. from the App Store.
Went through a long process of registering again, twice, sending in a coded number. To be told that the site is busy at the moment.
Not an easy or a straight forward process, with grammatical errors in the wording of documents.
Hey ho, try again tomorrow, day four.
Thanks for replying. -
In "settings/general" the words SOFTWARE UPDATE don,t appear below ABOUT or anywhere under GENERAL to enable me to update to ios6 . Any help appreciated.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
I was trying to sync my 120GB iPod Classic earlier, and it said it couldn't sync as the iPod disk could not be "read" or "written to." I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.
Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location. Select the location of your on external hard drive.
-
I have tried many times to restore my new IPod Touch 5G in I Tunes and it will not allow me to do it. My Ipod will not turn on at all even when on a fresh charge. Only displays the arrow leading up to ITunes logo. I have tried the method of holding the home button and on button and this does not work. Any help appreciated.
My I Pod was working fine until the day I updated the software to 6.0.1.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.
I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
The root cause for this was failing to use the UTILITY designed for this very purpose.
I edited the virtual directory settings in IIS and was able to put the correct path in.
You still need to use the UTILITY.. to fix all the other stuff you're still missing.
In the %ProgramFiles%\Update Services\Tools folder...
WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
This problem was caused by moving the WSUS updates to a different local drive.
No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks!!
You must purchase a new QT key for each computer.
Since you have a new iMac, you are entitled to 90 days of FREE phone tech support from Apple and you can use the Chat with a Support Agent. The online chat support _*is available 24 hours a day, 7 days a week.*_
If you've purchased an AppleCare Protection Plan, you're eligible for the duration of that agreement. -
Any help appreciated - iTune compression problems
Hi there,
Just bought a second hand iPhone 3g yesterday that has to last me out 5 months before my contract is up and I can hopefully get a 5 if it's out (touchwood).
Transferred some music from iTunes to my iPhone and on the phone speakers it sounds fine, however when I put my headphones into the jack it's incredibly distorted and sounds like it's suffered far too much compression.
I'm guessing this is possibly a headphone jack related problem as opposed to a compression issue? Tried converting files to AAC but made no difference
Any help appreciated!
Thanks
DanFYI - the iPhone includes a single external speaker. The opposite grill that appears the same is a microphone.
If this were a compression or format issue, the same would occur when playing the music via the speaker. Using earbuds has no affect on the compression or format. More than likely this is a headphone jack related problem or there could be a problem with the earbuds being used.
Maybe you are looking for
-
Hi, I've got a little problem with my iTunes, because i've purchased some albums on iTunes Store before having my iPhone. Then I have my iPhone and these songs were automaticly synchronized with my iPhone and they are not in my iTunes's library, but
-
Repost-- Facing Problems while installation of SAP NW PT 7.0 on Oracle 10.2
Hello Friend, Sorry Friends, for my last long.....long...Post..... Here , i m reposting the same matter...Please help. We are trying to Install SAP NW PI 7.0 on Windows 2003 Server Enterprise Edition x64, with Oracle 10.2 - 64bit Edition. On this hos
-
Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072
I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop. I am able to create the VPN connection but the connection will not allow data to be transferred. Stats from a manual connection: Cis
-
No workshop installed with Solaris WLS 7.01 installer ..
Dear all ! I justed installed a fresh WLS 7.01 on a Solaris 2.7 box .. and i faced the same problem as I already had with the full installer for wls 7.0 .. Even if I click custom .. and click on all three parts, means also make the click for the work
-
Installing Windows 7 on TX2-1020 - over Vista
Hey folks my TX2-1020us really seems to be choking lately, even on the simplest things (like only having explorer open, on its own). so i thought i might try installing Windows 7 Ultimate on it. at the moment, its running Vista Home Premium, pre-inst