NetWeaver 7.0 ABAP Trial SP12 - installation problems

Hi
I have been struggeling a lot with the installation of NetWeaver 7.0 ABAP Trial SP12. I have installed and uninstalled serveral times with no luck - I have used the SAP clean up tool, RegCleaner and deleted SAP entries my self in regedit.
The installation only takes a few minutes now before the installation is complete and it asks me if I would like to start the app server and the SAP management console - when I then choose continue it fails.
Im pretty surprised that the maxdb is not installed - even though that I have uninstalled it before the reinstallation attempts.
I would like to start over from scratz - is it possible somehow (so that the maxdb is installaded again and so on) or is there something else that I should try?
I have tried to do the setup mentioned in the troubleshooting guide (https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37) and searched this forum, but I cannot make it work.
Kind regards,
Torben
D:SAPNSPlog.txt
(Oct 28, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file D:SAPNSPlog.txt for details.
(Oct 28, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Oct 28, 2007 6:40:46 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file D:SAPNSPlog.txt for details.
(Oct 28, 2007 6:40:46 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
D:SAPNSPhomeinstall.log
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateDirectories
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:38:57
ACTION: * Logfile: steps.CreateDirectories.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateDirectories <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CopyExecutables
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:38:58
ACTION: * Logfile: steps.CopyExecutables.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory
COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory
COPY_EXECUTABLES: Prepare environment for engine configuration:
COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.
COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _startSystem.cmd,D:SAPNSPSYSexe
un,startSystem.cmd)
Reading file D:SAPNSPhomeadditional_sw _startSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _stopSystem.cmd,D:SAPNSPSYSexe
un,stopSystem.cmd)
Reading file D:SAPNSPhomeadditional_sw _stopSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(D:SAPNSPhomeadditional_sw _strdbsj2ee.cmd,D:SAPNSPSYSexe
un,strdbsj2ee.cmd)
Reading file D:SAPNSPhomeadditional_sw _strdbsj2ee.cmd
Keys:
Sections to process:
COPY_EXECUTABLES: Finished ....
SUCCESS: Execution of step: >> CopyExecutables <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AdaptProfiles
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:00
ACTION: * Logfile: steps.AdaptProfiles.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: D:SAPNSPSYSexe
unjenqulib.jar
Adding to classpath: D:SAPNSPSYSexe
unjperflib.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartup.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupapi.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupimpl.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcfrog.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmc.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcsoap.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcswing.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsoapclient.jar
ADAPT_PROFILES: Start to create the profiles
CONFIGURATION: Create JDBC Path in J2EE installation directory.
CONFIGURATION: New JDBC Path: D:SAPNSPDVEBMGS00j2eejdbc (Exist=false)
CONFIGURATION: Old JDBC Path: D:SAPNSPDVEBMGS00j2ee (Exist=false)
CONFIGURATION: New JDBC Path created.
CONFIGURATION: Copy Jars from: D:SAPNSP\_installTempj2eeINSTALLERCOMMONJDBCADA
CONFIGURATION: to : D:SAPNSPDVEBMGS00j2eejdbc
ADAPT_PROFILES: Create profiles for standalone J2EE
copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,D:SAPNSPSYSprofile,DEFAULT.PFL)
Reading file additional_sw/t_DEFAULT_PFL_710
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,D:SAPNSPSYSprofile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,D:SAPNSPSYSprofile,NSP_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_SID_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,D:SAPNSPSYSprofile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_DB_INIT_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,D:SAPNSP/SYS/exe/run/,strdbmsONCE.cmd)
Reading file additional_sw/t_strdbmsONCE.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_setsapenv.cmd,D:SAPNSP/SYS/exe/run/,setsapenv.cmd)
Reading file additional_sw/t_setsapenv.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
SUCCESS: Execution of step: >> AdaptProfiles <<
 finished successfully.
 Elapsed time: 00:00:02 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AddToServices
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:03
ACTION: * Logfile: steps.AddToServices.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
AddToServices: Instance shall not be started by default.
AddToServices: Therefore we provide a start script in:
AddToServices: D:SAPNSPhomestartEngine.bat
AddToServices: Service will be created.
DEBUG: Register service with the following command:
DEBUG: "D:SAPNSPSYSexe
un/sapstartsrv.exe" -r -q -s NSP -n 00 -p D:SAPNSPSYSprofileSTART_DVEBMGS00_HUB7380B2F
Start external command...
Service succesfully installed.
Process exited with rc: 0
SUCCESS: Execution of step: >> AddToServices <<
 finished successfully.
 Elapsed time: 00:00:10 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StartSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:14
ACTION: * Logfile: steps.StartSCSInstance.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: D:SAPNSPSYSexe
unjenqulib.jar
Adding to classpath: D:SAPNSPSYSexe
unjperflib.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartup.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupapi.jar
Adding to classpath: D:SAPNSPSYSexe
unjstartupimpl.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcfrog.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmc.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcsoap.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsapmcswing.jar
Adding to classpath: D:SAPNSPSYSexe
unservicehttpsapmcsoapclient.jar
Starting SCS-Instance
Executing SCS-startup-command: D:SAPNSPSYSexe
unstartsap.exe name=NSP nr=00 SAPDIAHOST=HUB7380B2F
Execute in current working dir: D:SAPNSPhome
Start external command...
| / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / - | / STARTSAP continues...
Process exited with rc: 0
SUCCESS: Execution of step: >> StartSCSInstance <<
 finished successfully.
 Elapsed time: 00:00:34 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StopSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: D:SAPNSPhome
ACTION: * Date: 2007.10.28 18:39:50
ACTION: * Logfile: steps.StopSCSInstance.log
ACTION: * Property File: D:SAPNSPhomej2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Checking running engine process via sapcontrol and wait for stopped
Checking on: SCS
Stop instance with cmd: D:SAPNSPSYSexe
unsapcontrol.exe -prot PIPE -nr 00 -host HUB7380B2F -function StopWait 300 10
Stop instance in directory: D:SAPNSPSYSexe
un
Start external command...
28.10.2007 18:39:51
Stop
OK
28.10.2007 18:40:01
StopWait
OK
Process exited with rc: 0
Start external command...
28.10.2007 18:40:23
GetProcessList
FAIL: Unknown error, TCP connect failed in tcp_connect()
Process exited with rc: 1
ERROR: GetProcessList rc is not 4.
ERROR: (rc == 4: GetProcessList succeeded, all processes stopped)
ERROR: Execution of step: >> StopSCSInstance <<
 failed. Execution returned: RC=100
 Elapsed time: 00:00:33 [HH:mm:ss]
Process exited with rc: 100

Hi Klaus
Thanks for your reply.
I should not be nessesary with the loopback adapter in my case - my pc is connected to a network and I can access localhost. However, I have tried with and without loopback adapter.
What I did (for each time I tried to install:
Deleted installshield folder
Uninstalled maxDB
Stoped SAPNSP_00 service
Deleted SAP and SAPDB folder
Ran the SAP reg clean tool
Then I made i reboot, and installed NetWeaver 7.0 ABAP Trial SP12 once again.
In my last case I installed the loopback adapter, rebooted once again and then installed the SP12 trial. When I installated the loopback adapter I assigned ip adresse 10.10.0.10 (and subnet mask 255.255.255.0) to it and added a line (10.10.0.10 NSP) to the hosts file.
But I still get error when installation has finished:
D:\SAP\NSP\log.txt
(Nov 1, 2007 7:09:14 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file d:\SAP\NSP\log.txt for details.
(Nov 1, 2007 7:09:14 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Nov 1, 2007 7:09:37 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file d:\SAP\NSP\log.txt for details.
(Nov 1, 2007 7:09:37 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
D:\SAP\NSP\home\install.log:
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateDirectories
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:45
ACTION: * Logfile: steps.CreateDirectories.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateDirectories <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CopyExecutables
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:45
ACTION: * Logfile: steps.CopyExecutables.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory
COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory
COPY_EXECUTABLES: Prepare environment for engine configuration:
COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.
COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_startSystem.cmd,d:\SAP\NSP\SYS\exe\run,startSystem.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_startSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_stopSystem.cmd,d:\SAP\NSP\SYS\exe\run,stopSystem.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_stopSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(d:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd,d:\SAP\NSP\SYS\exe\run,strdbsj2ee.cmd)
Reading file d:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd
Keys:
Sections to process:
COPY_EXECUTABLES: Finished ....
SUCCESS: Execution of step: >> CopyExecutables <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AdaptProfiles
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:47
ACTION: * Logfile: steps.AdaptProfiles.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
ADAPT_PROFILES: Start to create the profiles
CONFIGURATION: Create JDBC Path in J2EE installation directory.
CONFIGURATION: New JDBC Path: d:\SAP\NSP\DVEBMGS00\j2ee\jdbc (Exist=false)
CONFIGURATION: Old JDBC Path: d:\SAP\NSP\DVEBMGS00\j2ee (Exist=false)
CONFIGURATION: New JDBC Path created.
CONFIGURATION: Copy Jars from: d:\SAP\NSP\_installTemp\j2ee\INSTALLER\COMMON\JDBC\ADA
CONFIGURATION: to : d:\SAP\NSP\DVEBMGS00\j2ee\jdbc
ADAPT_PROFILES: Create profiles for standalone J2EE
copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,d:\SAP\NSP\SYS\profile,DEFAULT.PFL)
Reading file additional_sw/t_DEFAULT_PFL_710
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,d:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,d:\SAP\NSP\SYS\profile,NSP_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_SID_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,d:\SAP\NSP\SYS\profile,START_DVEBMGS00_HUB7380B2F)
Reading file additional_sw/t_START_DB_INIT_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,d:\SAP\NSP/SYS/exe/run/,strdbmsONCE.cmd)
Reading file additional_sw/t_strdbmsONCE.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_setsapenv.cmd,d:\SAP\NSP/SYS/exe/run/,setsapenv.cmd)
Reading file additional_sw/t_setsapenv.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
SUCCESS: Execution of step: >> AdaptProfiles <<
 finished successfully.
 Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AddToServices
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:07:49
ACTION: * Logfile: steps.AddToServices.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
AddToServices: Instance shall not be started by default.
AddToServices: Therefore we provide a start script in:
AddToServices: d:\SAP\NSP\home\startEngine.bat
AddToServices: Service will be created.
DEBUG: Register service with the following command:
DEBUG: "d:\SAP\NSP\SYS\exe\run/sapstartsrv.exe" -r -q -s NSP -n 00 -p d:\SAP\NSP\SYS\profile\START_DVEBMGS00_HUB7380B2F
Start external command...
Service succesfully installed.
Process exited with rc: 0
SUCCESS: Execution of step: >> AddToServices <<
 finished successfully.
 Elapsed time: 00:00:11 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StartSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:08:02
ACTION: * Logfile: steps.StartSCSInstance.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcsoap.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmcswing.jar
Adding to classpath: d:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
Starting SCS-Instance
Executing SCS-startup-command: d:\SAP\NSP\SYS\exe\run\startsap.exe name=NSP nr=00 SAPDIAHOST=HUB7380B2F
Execute in current working dir: d:\SAP\NSP\home
Start external command...
\ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | STARTSAP continues...
Process exited with rc: 0
SUCCESS: Execution of step: >> StartSCSInstance <<
 finished successfully.
 Elapsed time: 00:00:49 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StopSCSInstance
ACTION: * User: Torben.R.Pedersen
ACTION: * WorkingDirectory: d:\SAP\NSP\home
ACTION: * Date: 2007.11.01 07:08:52
ACTION: * Logfile: steps.StopSCSInstance.log
ACTION: * Property File: D:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.26.20070619102924
ACTION: **********************************************************************
Checking running engine process via sapcontrol and wait for stopped
Checking on: SCS
Stop instance with cmd: d:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host HUB7380B2F -function StopWait 300 10
Stop instance in directory: d:\SAP\NSP\SYS\exe\run
Start external command...
01.11.2007 07:08:52
Stop
OK
01.11.2007 07:08:52
StopWait
OK
Process exited with rc: 0
Start external command...
01.11.2007 07:09:14
GetProcessList
FAIL: Unknown error, TCP connect failed in tcp_connect()
Process exited with rc: 1
ERROR: GetProcessList rc is not 4.
ERROR: (rc == 4: GetProcessList succeeded, all processes stopped)
ERROR: Execution of step: >> StopSCSInstance <<
 failed. Execution returned: RC=100
 Elapsed time: 00:00:22 [HH:mm:ss]
Process exited with rc: 100
Any ideas how I get it to work?
Thanks and kind regards,
Torben

Similar Messages

SAP NetWeaver 7.01 ABAP Trial Version INSTALLATION PROBLEM !!!

Installation stops always when it's got 18%. The load_datasave file is getting biger and biger all the time...
Log file:
Tue Nov 04 13:39:50 CET 2008 MaxDB: Start SoftwareCheck
Tue Nov 04 13:39:50 CET 2008 MaxDB: IndepProgPath:
Tue Nov 04 13:39:50 CET 2008 MaxDB: IndepDataPath:
Tue Nov 04 13:39:50 CET 2008 MaxDB: Software doesn't exist, Variable MAXDB_SOFTW_EXISTS set to NO
Tue Nov 04 13:39:50 CET 2008 MaxDB: end of Check Section!
Tue Nov 04 13:40:50 CET 2008 MaxDB: Start of Extracting Software and Backup.
Should I wait??
I have been waiting for 3 hours till now and and there is constantly 18%
Please help;)
Edited by: Piotr Wieleba on Nov 4, 2008 4:39 PM

Hello Piotr,
I would not wait. I would start again.
Bye,
Peter

SAP NetWeaver 7.0 ABAP Trial Version Installation procedure

Hello -
I wanted to install "SAP NetWeaver 7.0 ABAP Trial Version". I downloaded the 2 .tgz files from https://www.sdn.sap.com/irj/sdn/downloads
I tried uncompressing the files with winzip and gunzip but didnt work. Is there a step by step installation proceedure for "SAP NetWeaver 7.0 ABAP Trial Version"
Regards
Sudhakar

There are several software in http://www.rarlab.com/download.htm
Anything in particular that I should user?
Regards
Sudhakar

SAP NetWeaver 7.0 ABAP Trial Version installation failure

Hi,
i'm trying to install SAP NetWeaver 7.0 ABAP Trial Version. At the begin of installation is everything well till 47%. I tried more time, but all the time the installation stppted at 47%. Do any one know a solution?
Best regards
Raj

What's the error message?
Greetings,
Blag.

NetWeaver 7.0 ABAP Trial Version Installation on 64bit System

I want to install the NetWeaver 7.0 ABAP Trial Version on System Windows Home Prof. 64 bit.
But i can´t install it without Windows Home Prof. 32 bit-System. Want can i do ?
Can you give me the installation manuall steps.
Thank you.
Bye
Matthias Günther
Edited by: MGSSOFT on Feb 19, 2011 7:14 PM

Hi Matthias,
You can download Windows Virtual PC from the Microsoft Website (just indicate that you own Windows 7 Professional or better, so you'll be able to download it. You can install it on Win 7 Home editions as well. This is not officially supported, but it works fine.)
Then you can create a virtual machine with Windows XP or Server 2003, on which you can install the Trial version.
Best wishes,
Jan

Netweaver 7.0 ABAP trial version installation failure

Hi,
Iam trying to install SAP NetWeaver 7.0 ABAP Trial Version in my system. I have started the installation process by executing "SapGuiSetup.exe" which installed SAPGUI on my system. Then, when i executed "maxdbtools/DBM76.exe", the following popup happened which says "-4 database instance not found" and iam unable to continue the installation process.
Any information about this will be helpful.
Regards
Aravindh A S

Hi Aravindh,
as far as I know DBM76.exe is not supposed to install the complete SAP System, not even the database software - it's only the exe to install the DBMGUI for SAPDB.
I'd recommend that you lookup the installation guide for SAP Netweaver 7.0 under:
[service.sap.com/instguides] --> SAP NetWeaver -> SAP NetWeaver 7.0 (2004s) --> Installation -> Master Guide
I know this is a quite long document but if you want to install SAP you need to read this to know about all the requirements and steps that need to be taken,
Regards,
Beate

Netweaver 2004's abap trial version installation failure.

hi,
i'm trying to install netweaver 2004's abap trial version and minisap for many times.but did'nt succeed.'m using win XP sp2.the "netweaver 2004's abap trial " installation is showin an error that "R3SETUP IS NOT CONNECTED" AND INSTALLATION GETS ABORTED.CAN ANYONE SUGGEST A SOLN.?

Hello Abraham,
do you have an antivirus- or firewall-program installed which perhaps blocks the connection?
I've tested it and all I had to do was to double-click the Database Manager icon on the desktop, click the Add button at the welcome page, didn't change any settings in the popup and click on the Add button again.
Also you could check the following:
1. Open Start -> Run..., type in services.msc and click Ok
2. Now you should see a list of the services of your computer
3. There you should find the 2 entries MAXDB: NSP and SAPNSP_00
4. Both should be started and the startup type should be automatic
Regards,
Norman Schröder
Edited by: Norman Schröder on Jan 10, 2008 12:02 PM
Corrected service.msc --> serviceS.msc

SAP NetWeaver 7.0 ABAP Trial Version Installation Step

Dear sirs
I have download the SAP NetWeaver 7.0 ABAP Trial Version both 2 rar files 2.47 GB.Now i want install.on my pc XP SP2 is runing and 24 GB free Disk Space on D Drive.
so plz gudie me how to install the SAP NetWeaver 7.0 ABAP Trial Version & license Key & Gui Settings
Thanks & Regards
Subhash Nimbalkar

Hello,
You must extract the first archive (only the first archive)
After that you'll see that you have in the directory start.htm
Double clicking 'start.htm' will take you to a web page where you find all the steps for installation.
Good luck.

ABAP trial veriosion installation problem

what is the Username and password for Database System Administrator Login for MAXDB in ABAP trial version installation, so that i can drop existing database and create new one

what is the Username and password for Database System Administrator Login for MAXDB in ABAP trial version installation, so that i can drop existing database and create new one

Problems with SAP NetWeaver 7.01 ABAP Trial Version installation

Hi,
I have installed NW 7.01 ABAP trial version "successfully".
Unfortunately the application server doesn't start.
After some time the Dispatcher process stopps.
In the syslog you can see that 7 workprocesses are started.
they all don't seem to be able to connect to the database and shut down.
The related syslog messages are:
Database: SQL error -1070 occurred (possible network problems?). Work process is stopped
Database: Database error -10709 at CON
Database: > Connection failed (RTE:Database name is missing)
SAP-Basis System: Stop Workproc 4, PID 4136
I already re-installed the Trial version, and I also checked that the database is up and running.
The error persist.
Can anyone help ?
Thanks
Stefan

Hi Juan,
thanks for the suggestion.
here's the trace file dev_dev0.
Still need help though ....
Regards Stefan
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Sat Oct 25 20:51:49 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
B Library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' loaded
B Version of 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' is "700.08", patchlevel (0.7)
B New connection 0 created
M sysno 02
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 7
M intno 20020600
M make: multithreaded, ASCII, optimized
M pid 5388
M
M kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5388) [dpxxdisp.c 1319]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Sat Oct 25 20:51:50 2008
M DpShMCreate: sizeof(wp_adm) 8232 (1176)
M DpShMCreate: sizeof(tm_adm) 3786880 (18840)
M DpShMCreate: sizeof(wp_ca_adm) 1280 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1296)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04CA0040, size: 4389744)
M DpShMCreate: allocated sys_adm at 04CA0040
M DpShMCreate: allocated wp_adm at 04CA1BF8
M DpShMCreate: allocated tm_adm_list at 04CA3C20
M DpShMCreate: allocated tm_adm at 04CA3C50
M DpShMCreate: allocated wp_ca_adm at 050404D0
M DpShMCreate: allocated appc_ca_adm at 050409D0
M DpShMCreate: allocated comm_adm at 05040E80
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 050C1D30
M DpShMCreate: allocated gw_adm at 050C1D70
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 050C1DA0
M DpShMCreate: allocated wall_adm at 050C1DA8
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sat Oct 25 20:51:52 2008
M ThInit: running on host 4FIL41430
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.007 (Make PL 0.7)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.4 BUILD 014-123-188-347
C SQLDBC client runtime is MaxDB 7.6.4.014 CL 188347
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
[dbsdbsql.cpp 113]
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#1 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#1 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#1 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10557]
M
M Info for wp 0
M
M pid = 5388
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server 4FIL41430_NSP_00 on host 4FIL41430 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Sat Oct 25 20:51:52 2008
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10777
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5388) [dpnttool.c 334]

SAP NetWeaver 7.0 ABAP Trial Version installation

Hi,
I was able to install the trial version first but I was not able to log on to the SAP as I kept getting connection refused or server SAPDB00 not reached error. Someone suggested me to uninstall and re-install it so I uninstalled the program but now I am not able to re-install it.
I have tried everything suggested in the guide and other threads (uninstalling MAXDB, stopping the service, removing installshield, SAP and SAPDB directories, installing network adapter, editing the host file, using registry clean, changed source directory to the one with a shorter name, etc. etc.) but i keep getting the following error
D:\SAP\NSP\log.txt
(Nov15, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file D:\SAP\NSP\log.txt for details.
(Nov15, 2007 6:40:23 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Nov15, 2007 6:40:46 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file D:\SAP\NSP\log.txt for details.
(Nov15, 2007 6:40:46 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
anyone who can help?
thanks,

Hello Manoj,
when do you get the message "partner '127.0.0.1:sapdb' net reached connection refused"?
What OS do you use?
Is there a firewall running that might cause some login problems (including the Windows firewall)?
Does the computer have a valid network address (either of a dhcp service or you use the Windows Loopback Adapter)?
Have you started the application server properly (Start-> all programs->NetWeaver 7 abap trial->NSP-> start application server)?

[New SAP NetWeaver 7.01 ABAP Trial Version] - Installation issues

Hi community
thanks to SAP for this trial release with MaxDB 7.7
Unfortunately the installation failed on my laptop. This is an extract of the error log:
(Aug 26, 2008 1:29:15 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Aug 26, 2008 1:29:15 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Aug 26, 2008 1:30:15 AM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed. Look at the log file D:sapnwNSPlog.txt for details.
(Aug 26, 2008 1:30:15 AM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
STACK_TRACE: 12
ProductException: (error code = 601; message="Services failed to start (see the log for details)")
(Aug 26, 2008 1:30:16 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file D:sapnwNSPlog.txt for details.
(Aug 26, 2008 1:30:16 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
My problem is not completely new, there are some hint in the Troubleshooting Guide for NW2004s ABAP Trial Version (step 4)
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37
and on this post another user had a problem similar to mine
NW04s installation errors
I have jdk 1.6 installed on my machine but there are no environment variables for java executables.
Is my problem caused but the java previously installed on the machine? If so, I can remove the jdk and retry installation
In this case it could be useful in my opinion to include this issue in the FAQ, it can be helpful for other users too.
Best Regards,
Valerio

I have problems installing..in windows vista business
I get this error
(Oct 10, 2008 8:02:36 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Oct 10, 2008 8:02:36 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Ariel/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Ariel/AppData/Local/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

SAP NetWeaver 7.0 ABAP Trial Version - Installation Error -

Hi:
I am trying to install the SAP NW 7.0 ABAP Trial version -
I am on Windows XP Pro and meet the Hardware requirements a'rite - however, 2 consecutive attempts leads the installer to stop and generate the same log message -
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/z0226309/LOCALS1/Temp/MaxDBSAPNWPREV.log")
Last few lines from The location mentioned above --
Tue Mar 25 13:05:46 EST 2008 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format
Tue Mar 25 13:05:46 EST 2008 MaxDB sdbinst: error occured while executing "C:\sapdb\programs\pgm\dbmcli.exe" -R "C:\sapdb\NSP\db" inst_reg -k \"C:\sapdb\NSP\db\"
Tue Mar 25 13:05:47 EST 2008 MaxDB sdbinst: "C:\sapdb\programs\pgm\dbmcli.exe" -R "C:\sapdb\NSP\db" inst_reg -k \"C:\sapdb\NSP\db\": ERR
Tue Mar 25 13:05:47 EST 2008 MaxDB sdbinst: "C:\sapdb\programs\pgm\dbmcli.exe" -R "C:\sapdb\NSP\db" inst_reg -k \"C:\sapdb\NSP\db\": -24913,ERR_SERVICEDB: Cannot register service database instance for C:\sapdb\NSP\db
Tue Mar 25 13:05:47 EST 2008 MaxDB sdbinst: installation exited abnormally at Tu, Mar 25, 2008 at 14:05:46
Tue Mar 25 13:05:47 EST 2008 MaxDB: Error during call to sdbinst, rc= 1
Tue Mar 25 13:05:47 EST 2008 MaxDB: Done with call_sdbinst
Tue Mar 25 13:05:47 EST 2008 MaxDB: rc of sdbinst = 1
Tue Mar 25 13:05:58 EST 2008 MaxDB: Start of CallSdbuninst
Tue Mar 25 13:05:58 EST 2008 MaxDB: IndepProgPath: C:/sapdb/programs
Tue Mar 25 13:05:58 EST 2008 MaxDB: dbmcli path: C:/sapdb/programs/pgm/dbmcli.exe
Tue Mar 25 13:05:58 EST 2008 MaxDB: Calling check for db_enum in case of an abort
Tue Mar 25 13:05:59 EST 2008 MaxDB: nsp doesn't exist. Nothing to do !
Tue Mar 25 13:05:59 EST 2008 MaxDB: rc of Method: 3
Tue Mar 25 13:05:59 EST 2008 MaxDB: IndepProgPath = C:/sapdb/programs
MaxDB: dbmcli_path = C:/sapdb/programs/pgm/dbmcli.exe
MaxDB: Database instance to drop: :NSP:
MaxDB: Instroot of NSP is: null
MaxDB: sdbuninst_option = :3
MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
Tue Mar 25 13:05:59 EST 2008 MaxDB: End of CallSdbuninst
Tue Mar 25 13:05:59 EST 2008 MaxDB: End of uninstallation
Any help would be much appreciated
Edited by: developer App on Mar 25, 2008 7:52 PM

Hi:
I am trying to install the SAP NW 7.0 ABAP Trial version -
I am on Windows XP Pro and meet the Hardware requirements a'rite - however, 2 consecutive attempts leads the installer to stop and generate the same log message -
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/z0226309/LOCALS1/Temp/MaxDBSAPNWPREV.log")
Last few lines from The location mentioned above --
Tue Mar 25 13:05:46 EST 2008 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format
Tue Mar 25 13:05:46 EST 2008 MaxDB sdbinst: error occured while executing "C:\sapdb\programs\pgm\dbmcli.exe" -R "C:\sapdb\NSP\db" inst_reg -k \"C:\sapdb\NSP\db\"
Tue Mar 25 13:05:47 EST 2008 MaxDB sdbinst: "C:\sapdb\programs\pgm\dbmcli.exe" -R "C:\sapdb\NSP\db" inst_reg -k \"C:\sapdb\NSP\db\": ERR
Tue Mar 25 13:05:47 EST 2008 MaxDB sdbinst: "C:\sapdb\programs\pgm\dbmcli.exe" -R "C:\sapdb\NSP\db" inst_reg -k \"C:\sapdb\NSP\db\": -24913,ERR_SERVICEDB: Cannot register service database instance for C:\sapdb\NSP\db
Tue Mar 25 13:05:47 EST 2008 MaxDB sdbinst: installation exited abnormally at Tu, Mar 25, 2008 at 14:05:46
Tue Mar 25 13:05:47 EST 2008 MaxDB: Error during call to sdbinst, rc= 1
Tue Mar 25 13:05:47 EST 2008 MaxDB: Done with call_sdbinst
Tue Mar 25 13:05:47 EST 2008 MaxDB: rc of sdbinst = 1
Tue Mar 25 13:05:58 EST 2008 MaxDB: Start of CallSdbuninst
Tue Mar 25 13:05:58 EST 2008 MaxDB: IndepProgPath: C:/sapdb/programs
Tue Mar 25 13:05:58 EST 2008 MaxDB: dbmcli path: C:/sapdb/programs/pgm/dbmcli.exe
Tue Mar 25 13:05:58 EST 2008 MaxDB: Calling check for db_enum in case of an abort
Tue Mar 25 13:05:59 EST 2008 MaxDB: nsp doesn't exist. Nothing to do !
Tue Mar 25 13:05:59 EST 2008 MaxDB: rc of Method: 3
Tue Mar 25 13:05:59 EST 2008 MaxDB: IndepProgPath = C:/sapdb/programs
MaxDB: dbmcli_path = C:/sapdb/programs/pgm/dbmcli.exe
MaxDB: Database instance to drop: :NSP:
MaxDB: Instroot of NSP is: null
MaxDB: sdbuninst_option = :3
MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
Tue Mar 25 13:05:59 EST 2008 MaxDB: End of CallSdbuninst
Tue Mar 25 13:05:59 EST 2008 MaxDB: End of uninstallation
Any help would be much appreciated
Edited by: developer App on Mar 25, 2008 7:52 PM

SAP Netweaver ABAP Trial 7 installation problem

Hi,
I tried installing SAP netweaver for ABAP trail in my virtual pc of windows XP. I am able to install sapinst successfully but when i am trying to install sapinstgui, I am getting error with JAVA JVM.
Program is starting... Please wait!
Path: C:\DOCUME1\ADMINI1\LOCALS~1\Temp\sapinst_exe.180.1300548127
jre\bin\java.exe
java.io.FileNotFoundException: C:\Program Files\Java\jre6\lib\security (Access is denied)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java:106)
 at java.io.FileInputStream.<init>(FileInputStream.java:66)
 at sun.tools.jar.Main.run(Main.java:184)
 at sun.tools.jar.Main.main(Main.java:903)
The system cannot find the path specified.
C:\Program Files\Java\jre6\lib\security does not contain the needed (local_policy.jar,US_export_policy.jar ) policy jars
See also SAP note 1238121.
Exit status of child: 10

Hi Tanmaya,
You better to go for newer version of SAP GUI Currently I am using 7.20.
Thanks and Best Regards,
Faisal

Error during the SAP NetWeaver 7.01 ABAP Trial Version Installation

Hi everybody,
I'm just beginning to discover SAP system and have already my first problem ^^
During the installation, the system stop at 33 or 34% of the complete installation. I've verified the system requirements and need some help to pass this step :
I've got an Intel(R) Core (TM)2 Duo CPU @2.66Ghz with 3.25 Go of RAM and with 55Go 25 hard disk free space
I've made the SAP Management Console installation and after this, i found this error in the log file :
(Oct 8, 2008 5:09:54 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:sapdbNSPlog.txt for details.
(Oct 8, 2008 5:09:54 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME~1/svigot/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME~1/svigot/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
I control the MaxDBSAPNWPREV.log and find this type of error :
Wed Oct 08 17:09:31 EDT 2008 MaxDB sdbinst: starting installation phase of package SAP Utilities 7.7.04.23 32 bit
Wed Oct 08 17:09:31 EDT 2008 MaxDB sdbinst: ---------------------------------------------------------------------
Wed Oct 08 17:09:31 EDT 2008 MaxDB sdbinst:
Wed Oct 08 17:09:31 EDT 2008 MaxDB sdbinst: start real extraction of "C:/sapdb/NSP/_tempLocation/SAPUTL.TGZ"
Wed Oct 08 17:09:32 EDT 2008 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-08 20:30:27 bin/
Wed Oct 08 17:09:34 EDT 2008 MaxDB sdbinst: extracting: -rw-r--r--      1215488 2008-07-08 18:59:59 symbols/sapni.pdb
Wed Oct 08 17:09:36 EDT 2008 MaxDB sdbinst: checking unpacked archive... ok
Wed Oct 08 17:09:53 EDT 2008 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format
Wed Oct 08 17:09:54 EDT 2008 MaxDB sdbinst: Free to wrong pool 3851a8 not 44344634 at SAPDB/Install/InstallRegistry/Package.pm line 406.
Wed Oct 08 17:09:54 EDT 2008 MaxDB: Error during call to sdbinst, rc= -1073741819
Wed Oct 08 17:09:54 EDT 2008 MaxDB: Done with call_sdbinst
Wed Oct 08 17:09:54 EDT 2008 MaxDB: rc of sdbinst = -1073741819
Wed Oct 08 17:09:54 EDT 2008 MaxDB: Start of CallSdbuninst
Wed Oct 08 17:09:54 EDT 2008 MaxDB: IndepProgPath: C:/sapdb/programs
Wed Oct 08 17:09:54 EDT 2008 MaxDB: dbmcli path: C:/sapdb/programs/pgm/dbmcli.exe
Wed Oct 08 17:09:54 EDT 2008 MaxDB: Calling check for db_enum in case of an abort
I've delete all files, all references to SAP with the regedit and made others tries but with practically the same results ... It can be made on other packages ...
I don't understand how can i resolve it and need your helps.
Thanks for your help,
Regards
Séverin

so ... i don't understand why ... I retry to make th einstallation on the first Windows and i've always the same error but not at the same place. It stops between 33 and 35% of the installation during the check of the package ... very strange.
Have you made the installation with the SP3 or do you using the Netweqver with that ? Becquse my problem comes during the installation. I'll try to make the upgrade of the Windows to control the good working of the system (i think there is no problem with that .... but in the doubt )
Thanks for the information Peerasit Jomsri

NetWeaver 7.0 ABAP Trial SP12 - installation problems

Similar Messages

Maybe you are looking for