Netweaver 7.30 does it support GRC 10.0 ACCESS CONTROL

Does anyone know if GRC 10.0 access control runs on Netweaver 7.30
where do you get Netweaver 7.20
I see the trial version. I need this for sql 2008 not trial
Any help is appreciated.
Thanks
Joe

Hi,
As per Note 1490996, you would need Netweaver 7.0 Enhancement Package 2 (7.02) as base for installing the GRC add-on. NW 730 does not seem to be supported.
Check the service market place(http://service.sap.com/swdc) for Netweaver 7.02 and not 720.
Regards,
Srikishan

Similar Messages

Does JDBC support OS_Authentication (UNIX) to access database?

Hi,
I have an Oracle 9i database account with OS_authenticated password. The database server is running on Unix. I have a Unix account. The database access was set to be OS authenticated. As long as I am able to login the Unix system, I don't need to submit a password to the database when accessing the database.
How does JDBC support this feature? I am using the thin driver DriverManager.getConnection and getConnection needs a database login and password.
Any input would be appreciated. Thank you!
Kam

The OCI driver will certainly should support this. I think you just pass it empty string ("") for username and password. That's pretty much the same as the ODBC drivers handle it. I am not sure that the thin driver will.

Does N810 support Bluetooth SAP(SIM Access Profile...

Does N810 indeed support Bluetooth SAP? If so, N810 must have its own GSM modem, does N810 have modem?

It has no GSM modem because it isn't a mobile phone. It cannot use GSM or 3G networks.
It's an internet tablet that can be used to make VoIP calls over wi-fi.
I believe it supports SAP because it can access the sim on a mobile phone thats connected via bluetooth.
You won't get a reply from a nokia engineer here as this is a user to user forum. If you want a comment from nokia you need to use the "contact us" link near the top of the page.
Message Edited by psychomania on 26-Nov-2008 09:52 AM

Does Adobe support use logmein123 to access client's computers?

After a 15 minute wait on my computer trying to get Photoshop support, I was asked to leave my
phone number and a representative would get back to me. When they called later in the day, the representative
wanted to access my computer. He had me type into a logmein123 address (I had never heard of this before).
The minute I pressed enter, a major warning from my cable company came on my screen warning me
that there were major security threats to my computer. The representative told me to hold on, I closed the screen
down, and then he had me go to join in to access my laptop and was able to fix my problem.
Is it normal protocol to use logmein123?

I have no idea whether support uses this. Only Adobe Support can say. But I do suspect that you are posting in the wrong forum. This forum is for the Adobe RoboHelp software product and it seems you are having issues with PhotoShop. That being said, I see no merit in moving the thread to the PhotoShop forum as it's really more of a general support question and not one related to PhotoShop, per se. I'm unsure exactly where such questions should actually be posted. I'll ask in another support forum and see where this thread should go.
Hold tight

GRC 5.3 Access Control - Critical Alerts for permissions

We have successfully configured alerts for transactions, but we have not been able to generate any alerts to indicate when a user executes the transaction and makes a change.
Should the risk containing the function be saved as Critical Action or Critical Permission?
How should the auth object be added to the function?
I have noticed when adding a transaction to a function 5.3 does not import the auth objects like VIRSA backend clients. Is this correct or was something missed in the configuration?
Any help is appreciated.
Thanks,
Joe

Hi Pablo,
     AC 5.3 release will have it's first anniversary in second half of 2009 and it is far better product than AC 5.2. Trust me, and go with AC 5.3, you won't be disappointed. Products in AC 5.2 are very restrictive and you will get frustrated with RE for sure.
    The recommendations you provided came out of installation guide and other documents. These requirements are ok but I would not recommend you to go with them. Insted, it would be better to go through the sizing guiding and size your server accordingly.
   SAP used to have AC 5.2 sizing guide but they have removed it from SMP as they have replaced it with sizing guide for AC 5.3. Here is the link to the guide:
https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000071612&_SCENARIO=01100035870000000112&_OBJECT=011000358700000435122007E
If you still want to go with AC 5.2 then open a message with SAP and they can provide you. I even has that guide so if you want it, I can share it with you.
Regards,
Alpesh
SAP GRC Manager (PwC)

SAP NetWeaver CE 7.1 EHP1 does not support version 1.5 JCA?

Hi,
I've been following the documentation of SAP NetWeaver CE 7.1 EHP1 regarding creation of a version 1.5 resource adapter. When I finally got to "Add/Remove projects" in the server view to test my adapter, I get this error:
The server does not support version 1.5 of the J2EE Connector module specification
Is this true? Then why does the documentation explain how to do it?
Regards,
Johan

>
Johan Hoogenboezem wrote:
> Hi Yordan
> No it is this one: [http://help.sap.com/saphelp_nwce711/helpdata/en/44/edb79d7f7303fde10000000a1553f6/content.htm|http://help.sap.com/saphelp_nwce711/helpdata/en/44/edb79d7f7303fde10000000a1553f6/content.htm]
>
> I'm used to the tuturials spelling out the creation of the application project whereas point 3 (c) of "Creating a Connector Project"
> on that page does not make it clear that an application project is needed. Usually there is a separate heading for that, like
> "Creating the application project". It seems silly, now, but at the time that is how I interpreted it.
> Regards,
> Johan
Hi Johan,
I agree with you that this does not seem clear enough throughout the Resource Adapters documentation.
Generally speaking about the Developer Studio, there are two equivalent options to add your project (be it JCA, EJB, Web, JPA, etc.) to an EAR project:
While creating your project, you can specify that you want it to be added to an EAR project - either a new one or an existing one (you can create the new EAR project also in the meantime, while creating your JCA project). This is done using the "Add your project to an EAR" checkbox and the relevant dropdown list and button...
Create your project. Then create a new EAR project and specify which projects you want to be included in the EAR.
As I promised, we will improve that part of the documentation for the next release.
Thanks again, and best regards,
Yordan

What are the points which the migration program does not support?

Hi,
I have a question about migration program 'RSEC_MIGRATION'.
As described in 'Running the Enterprise Data Warehouse',
in 'Frequently Asked Questions - Business Intelligence in SAP NetWeaver 2004s',
this program supports about 80% automatic migration
according to some documents.
What is the rest 20%?
What doesn't this program support?
Though it may be difficult to make a list for that
because settings of authorization objects are various,
I think SAP should list up as many important points
which this program does not support as possible
by using some examples.
If SAP thinks of delivering such a list,
when will it be delivered?
Best regards,
Kaito Hosoyamada

Hi Kaito,
this statement relflects the fact that a program will never be able to handle all potential complex scenarios that customers might have.
The facts that are not completely covered by the migration assistant are:
1.) The more complex the existing authorization concept, the more manual migration work might be necessary
2.) Customer-exit variables for 0TCTAUTHH cannot be migrated; the respective hierarchy nodes must be assigned manually
3.) Intensive tests are highly recommended
Cheers
SAP NetWeaver BI Organisation

Applying Support Packs at GRC Access Control 5.3 overall solution level

Hi All
I recently noticed something at a customer, that GRC Access Controls 5.3 launch pad shows a different SP level e.g. version8, while the components, Compliant User Provisioning shown SP10, RAR shown SP12 etc.
My questions are;
1. Should SP updates be applied at a component level i.e. at RAR, CUP, ERM, and SPM level?
2. Would this customer scenario cause an issue in the future, when for example RAR is sitting on a different SP level than CUP etc.?
3. If GRC Access Controls launch pad shows SP level/version, does this SP level/version represent the SP level/version that applies to all components? or does this represent SP level/version of the launchpad only?
4. Are the Support Packs required to be applied on the ABAP stack as well?
Thanks
Odwa

Hi Odwa,
Please see my replies below.
1. Should SP updates be applied at a component level i.e. at RAR, CUP, ERM, and SPM level? NO, Just apply them to the entire GRC-AC from the JSPM
2. Would this customer scenario cause an issue in the future, when for example RAR is sitting on a different SP level than CUP etc.? Yes, one of these days there is going to be a problem becuas eof this
3. If GRC Access Controls launch pad shows SP level/version, does this SP level/version represent the SP level/version that applies to all components? or does this represent SP level/version of the launchpad only?
4. Are the Support Packs required to be applied on the ABAP stack as well? Yes they need to be applied on all the ABAP stacks as well, it is very omportant that support packs remain in sync everywhere.
Thanks!
Chinmaya
Edited by: chinmaya prakash on Dec 6, 2010 4:10 PM

Does SAP supports transport of TPZ files from PI7.11 to XI3.0 ???

Hi,
Does SAP supports transport of TPZ files from PI7.11 to XI3.0 ???
because after Pasting PI7.11 .tpz files into import directory of Development XI3.0 .. I am not able to find these files into ID/IR -Tools - Import ?
What could be reason ??
Regards
PS

Have check this note :Note 1247043 - Release Restrictions for EHP 1 for SAP NetWeaver PI 7.1
BC-XI-CON-SOP
No release
XI 3.0 message protocol in the SOAP adapter
Supported with EHP 1 for SAP NetWeaver Process Integration 7.1 (version abbreviated with 7.11 from now on) is the XI 3.0 message protocol in the SOAP adapter for the communication between an Advanced Adapter Engine version 7.11 and ABAP proxies generated in the SAP NetWeaver Process Integration versions 3.0, 7.0, 7.10, 7.11; Advanced Adapter Engine version 7.11 and 7.10; SAP Partner Connectivity Kit version 7.11 and below, Java SE Adapter Engine 7.11 and below, Integration Server 7.11. However for all above listed scenarios the following functions are currently not supported: Acknowledgements, Transport & message level security, Principal propagation, Bulk support on sender-side, HTTP destinations support. Not supported with EHP 1 for SAP NetWeaver Process Integration 7.1 is the XI 3.0 message protocol in the SOAP adapter for the communication between an Advanced Adapter Engine version 7.11 and Java proxies, Integration Server 7. 10 and below.
( Changed at 18.12.2009 )
Regards
Pothana

Does it support install OEM12c with OEM12c ops center into same machine?

Hi,
I'm not familiar for OEM and OPS center.
- Does it support install OEM12c and OEM12c ops center into same machine?
- Would you please share any hardware / OS in OEM12c and OEM12c ops center?
Thanks.

Holger,
Thanks for the reply, that was useful.
I posted this message in service markeplace, and got a reply from SAP, and they do not have out of box solution. Since the project is on aggressive schedule, may be this issue, which involves lot of devlopment needs to tackle in next proect cycle.
Qustion regarding the Apache was also resolved. Reply from SAP is posted below.
Thanks,
Durga
HI Mr Durga,
Can a user say "abc" can have different content displayed while he
logins from Internet or intranet.
This feature is not provided with the standard Delivered NWO4 suite.
I would ask you to take this query in the sdn forum,as these type of
questions are answered by SAP consulting guys.
As far as multitenant EP is concerned,
Based on ramp-up experience and customer feedback, SAP has decided to
not release the IT scenario variant "Implementing a Multitenant Portal"
for general availability after SAP NetWeaver 2004s ramp-up.
Refer to the documentation link
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/
615ad7dfeb4688e10000000a11466f/frameset.htm
Second question:
Does Apache installation is supported on the Virtual machine.
Installation of Apache as DMZ is not Recommended by SAP.
SAP Recommends SAP Web Dispacher.
But SAP supports to a certain extend,if the client is using Apache.
Please refer to the attached Note
Note 480520 Integration of SAP J2EE Engine 6.20 / 6.40 with Apache

Error: This server does not support HTTPS! It is therefore potentially...

Hi,
We are using EP6 SP17 with the BP of SRM 4.
in the Shop iView -> MASTER_CATALOG, we get an error saying: :This server does not support HTTPS! It is therefore potentially unsafe to send your password".
Even after sending the user& password we are unable to access the catalog.
Does anyone encountered this problem? Does anyone have a solution for this?
Thanks in advance,
Aviad

Hi,
Pls refer the foll link:
/people/gregor.wolf3/blog/2005/10/11/setup-https-ssl-for-the-sneak-preview-sap-netweaver-04-abap-edition-on-windows
BR,
Disha.
PLs reward points for useful answers.

URGENT: Does ALBPM support RadiantOne Identity Management?

Hi Expert,
Please help to answer this question.
1. Does ALBPM support RadiantOne Identity Management?
2. What is the standard protocol to configure to RadiantOne?
3. Any documentation on Identity Management Configuration?
Thanks

Hi All,
SAP support have confirmed the following.
SAP NetWeaver has some federation capabilities with varying
support in different components (SAML 1.1) SAML 2 support
is planned in a future release.
SAP NetWeaver Identity Management does not have federation
support on its own. This could be introduced in future releases.
Does Any one know how SAML 1.1 support Federation capabilities? Which all sap netweaver platforms have them?

Does the later 2009 MacBook support the Apple DVI to Video Adapter (s-video). I want to connect it to an old tv which does not support HDMI. Any suggestions?

I have a late 2009 MacBook which I want to connect to an old LG tv. The tv does not support HDMI it only has the (red, while, and yellow) ports. Sorry I dunno the exact name for it.
So I was thinking of using the Apple Mini DVI to Video Adapter (s-video), link below...
http://store.apple.com/Catalog/dk/Images/M9319_screen.jpg
But I'm afraid that the MacBook might not support the adapter.
Can anyone give me a solution for this? Is there an alternative way of doing this? I'm kinda new to apple display adapters.

The Late 2009 model 6,1 has a Mini DisplayPort not the Mini-DVI. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When the System Profiler comes up check the Model Identifier.
Composite is the name for the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs. If you want to use the Composite input on your TV there’s no Mini DisplayPort to Composite. You’ll have to get a Mini DisplayPort to VGA adapter http://www.amazon.com/s/ref=nb_sb_ss_i_1_19?url=search-alias%3Delectronics&field -keywords=mini+displayport+to+vga&sprefix=mini+Displayport+to and a VGA Adapter to TV S-Video RCA Out Cable for PC Video. http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
Only the Yellow plug or the S-Video plug for video will work. For sound you'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable

IE11/Win 8.1 error 'Your client does not support opening this list in windows explorer'

I hoping someone might be able to help with this frustrating issue.
I work on a project where we are using various versions of on-line SharePoint (2007/O365). In order to quickly drag and drop folders we need to often open the document libraries by using the 'open in windows explorer view'.
Using the same device, on occassion this works. But often it gives a rather unhelpful message 'Your client does not support opening this list in Windows Explorer'.
I've searched for this issue over the net and confirm that the sites are added to the 'trusted' sites area and that the 'remember you credientials' is checked on logging in.However, the searches do not seem to apply to IE11/Win8.1 or on-line version of sharepoint
(the suggested hot fix is not suitable)
Only this morning, using the same device I was able, for a short while to open in explorer view, and then for no apparent reason, it began to display the error message. I had changed nothing regarding settings or even closed the browser.
Do you have any support/ideas/fixes on how to resolve this.
Many thanks
val

Hi Val,
sometimes an answer can be found on the internet by typing the error message from your computer into your favourite search engine.
eg.
http://www.bing.com/search?q=your+client+does+not+support+opening+this+list+in+windows+explorer&form=IE10TR&src=IE10TR&pc=HPNTDFJS
see
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
follow the directions given above.... you need to add the domains to your Intranet sites list, not the Trusted sites list.
Perhaps you already have it mapped to your intranet zone....in which case make sure that you have unchecked "Enable Enhance Protected Mode" on the Intranet zone dialog in Internet Options.
If this is happening 'randomly' on client machines, then users are probably changing their internet security settings in Internet Options. Ensure they are accepting the default.... Internet Options>Security tab, click "Reset all zones to default".
Consult with your system administrators to find out if they are applying a custom security template for the Intranet zone... It may be removing the sharepoint domains from the client Intranet zone's domains lists.
HTH.
Rob^_^

HT201250 Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How

Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How ?

Time Machine is capable of backing up to multiple locations, and can be used to back up to both a local hard drive and a networked drive (provided that that drive is in or connected to a Time Capsule or another Mac that is sharing it over the network). The catch, though, is that you can't specify different things to back up to different destinations. Whatever you exclude from Time Machine backups is excluded from ALL backups, and whatever is included is included on all.
So, get a large enough drive that you can back up everything you want in all locations, or use something else for maintaining the network backup.
More information on these topics can be found here:
How do I set up Time Machine to a shared drive on another Mac?
How do I set up Time Machine to a Time Capsule or Airport Extreme?
"Rotating" Time Machine backup disks

Netweaver 7.30 does it support GRC 10.0 ACCESS CONTROL

Similar Messages

Maybe you are looking for