Netweaver 7.4 with Oracle
Hi All,
I'm currently trying an installation of NW 7.4 running an Oracle DB on a Linux virtual machine. I have scanned through the SMP looking for proper installation guides and software, but it seems like in can only be done if NW uses Sybase, HANA or MaxDB.
What options do I have if i want to succeed with NW on Oracle?
Thanking you in advance,
Nish
Hello Nish,
the main problem seems to be that Oracle is reluctant to support virtual environments.
For a start have look at these SAP notes:
http://service.sap.com/sap/support/notes/1173954
Oracle has not certified any of its products on VMware virtualized environments. Oracle Support will assist customers running Oracle databases on VMware in the following manner: Oracle will only provide support for issues that either are known to occur on the native OS, or can be demonstrated not to be as a result of running on VMware.
http://service.sap.com/sap/support/notes/1426182
Oracle is not certifying any of its products on XEN or KVM virtualized environments. XEN and KVM virtualized environments on the Linux platform impact critical runtime related areas for the Oracle Database such as process scheduling, network and disk IO access.
regards
Similar Messages
-
Hi,
We are currently on Netweaver 7.01 with below SAP components running on Unix OS AIX 6.1 and Oracle DB 10.2.0.4
ERP 6.0 EHP4
CRM 7.0
BW 7.0
EP 7.0
Solution Manager 7.0 EHP1 on Windows
Now, we are planning to upgrade oracle from 10.2.0.4 to 11.2.0.3.
Can anyone please help us to have answers to below questions
1) any Known Issues / Problems faced and troubleshooting guide related to oracle upgrade 11.2.0.3 ?
2) Our SAP Kernel release is 701 patch level 150, do we need to upgrade brtools to 7.20 as specified in SAP Note 12741 ?
3) What could be the testing done after upgrade, apart from running DBcheck and update statistics ?
With Regards,
Parin Hariyani>
> 1) any Known Issues / Problems faced and troubleshooting guide related to oracle upgrade 11.2.0.3 ?
>
Check SAP note 1431797.
> 2) Our SAP Kernel release is 701 patch level 150, do we need to upgrade brtools to 7.20 as specified in SAP Note 12741 ?
>
Check SAP note 1430669
> 3) What could be the testing done after upgrade, apart from running DBcheck and update statistics ?
>
You can also additionally run backup and database related jobs for testing.
Thanks
Sunny -
Error Installing Netweaver AS(Java) with Oracle
Hello All,
I'm installing Netweaver AS(Java stack) on Windows 2003 64 bit operating system.
I'm getting the below error when the installer is trying it create database. Can anyone give me solution for fixing the error.
I'm attaching the log for the reference.
INFO 2008-05-07 22:42:50
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/inifile.4.xml'.
INFO 2008-05-07 22:42:50
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/inifile.5.xml'.
INFO 2008-05-07 22:42:52
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2008-05-07 22:43:05
Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/keydb.3.xml'.
INFO 2008-05-07 22:43:05
Execute step runCatprocSql of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0.
INFO 2008-05-07 22:43:10
Removing file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2008-05-07 22:43:10
Creating file C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2008-05-07 22:43:10
Switched to user: xd1adm.
INFO 2008-05-07 22:43:10
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS.
INFO 2008-05-07 22:43:11
Switched to user: xd1adm.
INFO 2008-05-07 22:43:11
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS.
ERROR 2008-05-07 22:47:25
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-955 for defaultdest
SQL> Rem bnainani 11/29/00 - specify compatible=8.0 for create_queue_table
SQL> Rem liwong 10/20/00 - add def$_destination.flag
SQL> Rem bnainani 11/15/00 - specify compatible=8.0 for queue table
SQL> Rem narora 09/13/00 - add comment on new def$_destination columns
SQL> Rem liwong 09/01/00 - add master w/o quiesce: fixes
SQL> Rem liwong 07/12/00 - add total_prop_time_lat
SQL> Rem liwong 06/29/00 - add total_txn_count, total_prop_time
SQL> Rem liwong 05/17/00 - add_master_db w/o quiesce
SQL> Rem jstamos 05/17/00 - add_master_db w/o quiesce
SQL> Rem elu 01/24/00 - add column apply_init to def$_destination
SQL> Rem alakshmi 12/02/99 - Bug 979398: Before-row insert trigger on
SQL> Rem def$_propagator
SQL> Rem wesmith 10/31/98 - change shape of table def$_pushed_transactions
SQL> Rem jnath 02/23/98 - bug 601972: split anonymous pl/sql blocks
SQL> Rem wesmith 01/21/98 - create def$_pushed_transactions table for
SQL> Rem server-side RepAPI
SQL> Rem nbhatt 07/27/97 - change create_queuetable -> create_queue_table
SQL> Rem nbhatt 04/21/97 - change 'TRACKING' in CREATE_QUEUE to 'DEPENDENCY
SQL> Rem nbhatt 04/21/97 - change syntax of create_queue
SQL> Rem liwong 04/16/97 - Alter view system.AQ$DEF$_AQ{CALL,ERROR}
SQL> Rem liwong 04/11/97 - Fixing defaultdest_primary typo
SQL> Rem jstamos 04/10/97 - remove unneeded indexes
SQL> Rem nbhatt 04/08/97 - change create_qtable to create_queuetable
SQL> Rem jstamos 04/04/97 - tighter AQ integration
SQL> Rem liwong 04/02/97 - Add schema_name, package_name in def$_calldest
SQL> Rem ato 03/31/97 - create_qtable interface change
SQL> Rem liwong 03/25/97 - remove batch_no from def$_tranorder
SQL> Rem liwong 02/24/97 - pctversion --> 0 for def$_aqcall, def$_aqerror
SQL> Rem liwong 02/22/97 - Remove dropping view aq$def$_aqcall
SQL> Rem ademers 02/07/97 - Remove constraint def$_calldest_call
SQL> Rem liwong 01/11/97 - drop and create aq$def$_aqcall (temporary)
SQL> Rem liwong 01/10/97 - Alter view aq$def$_aqcall
SQL> Rem liwong 01/07/97 - Alter default value for batch_no
SQL> Rem jstamos 12/23/96 - change temp$nclob col
SQL> Rem jstamos 11/21/96 - nchar support
SQL> Rem sjain 11/11/96 - Remove dummy buffer # comment
SQL> Rem asgoel 11/05/96 - Disable misc_tracking in def$_aqerror
SQL> Rem sjain 11/06/96 - deferror changes
SQL> Rem vkrishna 10/28/96 - change STORED IN to STORE AS for lob
SQL> Rem sjain 10/02/96 - Aq conversion
SQL> Rem sbalaram 09/24/96 - ARPC performance - add foreign key index
SQL> Rem jstamos 09/06/96 - rename temp$lob and temporarily change nclob
SQL> Rem sjain 09/03/96 - AQ converson
SQL> Rem ademers 08/02/96 - queue_batch default in def_destination
SQL> Rem ademers 07/29/96 - queue_batch default in def_call
SQL> Rem ademers 07/29/96 - queue_batch default
SQL> Rem jstamos 07/24/96 - add system.temp$lob
SQL> Rem sbalaram 07/22/96 - create def$_aqcall and def$_aqerror tables
SQL> Rem jstamos 06/12/96 - LOB support for deferred RPCs
SQL> Rem ldoo 06/28/96 - Comment out queue_table from def_tranorder
SQL> Rem ademers 05/30/96 - create def_origin
SQL> Rem ademers 05/28/96 - fix def_destination col names
SQL> Rem ldoo 05/09/96 - New security model
SQL> Rem sjain 05/01/96 - add seq col to def_destination
SQL> Rem ademers 04/29/96 - add batch_no, dep_scn to def_call
SQL> Rem jstamos 12/04/95 - 324303: use index to avoid sorting the queue
SQL> Rem jstamos 08/17/95 - code review changes
SQL> Rem jstamos 08/16/95 - add comments to tables
SQL> Rem wmaimone 01/04/96 - 7.3 merge
SQL> Rem hasun 01/31/95 - Modify tables.<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
ERROR 2008-05-07 22:47:25
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-05-07 22:47:25
FCO-00011 The step runCatprocSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql was executed with status ERROR .
INFO 2008-05-07 22:57:22
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql".
Thanks,
BalaWith the help of this thred I also got resolved the issue .
Thanks to all those who confirmed there issues resolved.
Solutions - OSS Note 972263 - Inst.NW 7.0(2004s)SR2/Business Suite 2005 SR2-UNIX/Oracle
<d023322 ,18/JUL/08>----
(...)runCatprocSql was executed with status ERROR
Symptom:
You see an error message like the following in sapinst_dev.log:
ERROR .....
FCO-00011 The step runCatprocSql with step key NW_Onehost ind ind ind ind 0 0 NW_Onehost_System ind ind ind ind 1 0 NW_CreateDBandLoad ind ind ind ind 10 0 NW_CreateDB ind ind ind ind 0 0 NW_OraDBCheck ind ind ind ind 0 0 NW_OraDBMain ind ind ind ind 0 0 NW_OraDBStd ind ind ind ind 3 0 NW_OraDbBuild ind ind ind ind 5 0 runCatprocSql was executed with status ERROR .
This error only occurs if Oracle patch 10.2.04 is installed.
Solution:
Modify control.xml and restart the installation
1. Edit file control.xml in your installation directory (default sapinst_instdir).
2. Search for "this.runCatproc = "
3. Go to "script.execute_AbortOnFailure();" some lines below.
4. Replace "script.execute_AbortOnFailure();" with "script.execute();".
5. Restart Sapinst and choose "Continue with the Old Option" -
How to Download Trial Version of SAP ERP 6.0 with Oracle?
HI all,
Kindly help out how i can able to download SAP ERP 6.0 or Netweaver trial dump with oracle database in SAP Support portal.
Awaiting for your valuable reply.
Regard
M.L.GopinathCheck if the Free Download Catalog has the trial version of PI7.0: http://www.sdn.sap.com/irj/scn/downloads
Regards,
Abhishek. -
Error by patching of SAP NetWeaver with Oracle on Windows
Hi!
I am about to patch my SAP system (SAP NetWeaver 04S) with Oracle on Windows.
The following error occurs:
Import phase 'CHECK_REQUIREMENTS' (05.02.2008, 16:00:39)
Error during executing the tp command 'tp CONNECT B11 ...'
tp return code: '0232' , tp message: 'connect failed' , tp output:
This is tp version 340.16.38 (release 640, unicode enabled)
ERROR: Connect to B11 failed (20080205160039, probably wrong environment).
TRACE-INFO: 1: [dev trc ,00000] Tue Feb 05 16:00:39 2008 29426 0.029426
TRACE-INFO: 2: [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 38 0.029464
TRACE-INFO: 3: [dev trc ,00000] using "E:\usr\sap\B11\SYS\exe\run\dboraslib.dll" 35 0.029499
TRACE-INFO: 4: [dbsloci. ,00000] *** ERROR => Cannot connect: dbs/ora/tnsname in Profile missing
TRACE-INFO: 5: 738 0.030237
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0232
standard output from tp and from tools called by tp:
Can some one give some recommendations how to proceed?
Is something wrong with oracle environment?
Thank you very much!
regards
ThomHi!
Thank you!
The problem is my <sapsid> user (B11adm) cannot log in into OS, but I can log in as an other <sid>user (E11adm) or as administrator.
If I execute the command as other <sid>user (E11adm) >r3trans -d I retrieve:
2EETW169 no connect possible: "DBMS = ORACLE
--- ORACLE_SID = 'B11'"
r3trans finished (0012).
The result of commando >set:
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\e11adm\Application Data
CLIENTNAME=DZEM9001
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=OLDA8005
ComSpec=C:\WINDOWS\system32\cmd.exe
dbms_type=ORA
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\e11adm
JAVA_HOME=C:\j2sdk1.4.2_06
LOGONSERVER=
OLDA8001
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=E:\oracle\B11920
ORACLE_SID=B11
OS=Windows_NT
Path=C:\j2sdk1.4.2_06\bin;E:\usr\sap\B11\sys\exe\run;E:\oracle\B11920\jre\1.4.2\
bin\client;E:\oracle\B11920\jre\1.4.2\bin;E:\oracle\B11920\bin;C:\Program Files\
Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;E:\oracle\BWX920\bin;
C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microso
ft SQL Server\80\Tools\Binn\;E:\usr\sap\B11\SYS\exe\uc\NtI386
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 8 Stepping 6, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0806
ProgramFiles=C:\Program Files
PROMPT=$P$G
RFCEXEC_SEC_FILE_PATH=E:\usr\sap\B11\SYS\exe\uc\NtI386
SESSIONNAME=RDP-Tcp#22
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME1\e11adm\LOCALS1\Temp\1
TMP=C:\DOCUME1\e11adm\LOCALS1\Temp\1
USERDNSDOMAIN=PORTAL.LOCAL
USERDOMAIN=PORTALGROUP
The result of >tnsping B11
TNS Ping Utility for 32-bit Windows: Version 9.2.0.5.0 - Production on 07-FEB-20
08 10:34:15
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
E:\oracle\B11920\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (SDU = 32768) (ADDRESS_LIST = (ADDRESS = (C
OMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = olda8005) (PORT = 1527))) (CONNEC
T_DATA = (SID = B11) (GLOBAL_NAME = B11.WORLD)))
OK (50 msec)
USERNAME=e11adm
USERPROFILE=C:\Documents and Settings\e11adm
windir=C:\WINDOWS
Is it possible to activate the right sidadm user (B11adm)?
Thank you!
regards
Thom -
ECC5 Installation with Oracle 10.2.0.2.0
Dear Experts,
We want to do a Heterogenous Sytem Copy from our ECC5 system landscape on HP-Unix, Oracle 10.2.0.2.0 to win2003 (64 bit), Oracle 10.2.0.2.0. Oracle version needs to be exactly same after migration as under this version our Production system will run for some time before we upgrade to ECC6 & Oracle 11G on Windows 2008.
The PAM says that ECC5 is supported with Oracle 10.2.0.2.0, though not sure if it's supported as a direct Installation to 10.2 or only as a Installation to Oracle 9.2 & followed by a upgrade to Oracle 10.2. The migration media for ECC5 that we have recieved from SAP comes with Oracle 9.2, so wanted to check if a direct Installation of ECC5 on Oracle 10.2.0.2.0 is supported?. If yes is this Oracle Installation DVD for 10.2.0.2.0 downloadable from SMP?.
Thanks
Abhishek> We want to do a Heterogenous Sytem Copy from our ECC5 system landscape on HP-Unix, Oracle 10.2.0.2.0 to win2003 (64 bit), Oracle 10.2.0.2.0.
Are you aware that you must have a certified migration consultant on-site to do the migration? see http://service.sap.com/osdbmigration --> FAQ
> The PAM says that ECC5 is supported with Oracle 10.2.0.2.0, though not sure if it's supported as a direct Installation to 10.2 or only as a Installation to Oracle 9.2 & followed by a upgrade to Oracle 10.2. The migration media for ECC5 that we have recieved from SAP comes with Oracle 9.2, so wanted to check if a direct Installation of ECC5 on Oracle 10.2.0.2.0 is supported?. If yes is this Oracle Installation DVD for 10.2.0.2.0 downloadable from SMP?.
What you need is not an ECC5 installation media but a new netweaver 2004 media containing the support for Oracle 10g, you'll have to do an R3load migration, backup/restore will not work (different endianess source vs. target).
Markus -
Question about SAP installation with Oracle 10g
I have successfully installed Oracle 10g on Windows server 2008 R2 64bit. I can connect to the database using mysql or through command prompt and run SQL commands.
I started installing the SAP EHP1 for SAP NetWeaver 7.0 ("51038620_13 BS 7 SR1 Installation Master Windows Server on x64 64bit") The installation goes very smooth. I choose the SAPSID and the DBSID sid, but then it gives an error stating to install oracle and continue or stop the installation & install Oracle. I have tried on continuing the installation since Oracle is already installed but I get the same message again and again.
Does it have to do with ORACLE 10g Sid. My Oracle SID is set to "ORCL" should it be the same as DBSID (during SAP Installation). Or the Oracle needs to be installed after SAP installation gets to the point for Oracle Installation. Please assist what needs to be changed. I can reinstall Oracle if needed. Any tips or comments would be nice.> Does it have to do with ORACLE 10g Sid. My Oracle SID is set to "ORCL" should it be the same as DBSID (during SAP Installation). Or the Oracle needs to be installed after SAP installation gets to the point for Oracle Installation.
You can't "change". You installed the Oracle software using "setup.exe" - which is wrong. You also created an example database - which is also not correct.
The Oracle software is installed, according to the installation guide, as
- start "sapserver.cmd" on the Oracle DVD (the SAP media)
- install the software according to the installation guide
- install the latest patchset
- install the latest PSU patch
--> and then start sapinst.
Markus -
Problem in SAP Server installation with Oracle DB
Hi,
We are working in SAP Server installation with Oracle DB. After some steps in our Process it is asking for a DVD called RDBMS DVD CLIENT ORACLE. We are trying to download in Service market place. But we could not get the Correct DVD for the installation. Please help in this issue. Where do we get the DVD to continue our SAP Server installation.
We are struck with our SAP Server installation. Please consider this issue as very urgent.
thanks in advance.
Regards,
Mohankumar.GHello Mohan,
Please specify which installation your are doing otherwise it is difficult to provide you
the correct path.
For eg if you are doing NW04's installation then path will be
downloads->entry by application group->Installations and Upgrades->SAP NetWeaver-> SAP NETWEAVER-> SAP NETWEAVER 2004S->according to OS/DB (there is oracle client cd)select the cd.
hope it helps..
Regards,
Jafer -
Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh. -
Install Solution Manager in RedHat Enterprise 6 with Oracle 11
Hello ,
In the marketplace-PAM, RedHat Enterprise 6 is not listed as approved for EHP1 Solution Manager 7.0 64 bit (unicode) with Oracle.
Does anyone have any information on this subject?
Has anyone installed the Solution Manager 7.0/Oracle with RedHat Enterprise 6?
tksYes, you are correct. Apart from PAM, following Note confirms this. RHEL 6 is not supported yet for Oracle, is in planning stage.
Note 1565179 - SAP software and Oracle Linux
Thanks -
Unable to boot bankapp servers with Oracle 8.1.7 in windows2000
Hello,I tried to run bankapp examples with oracle 8.1.7 in windows2000. But when
I booted the servers using tmboot, there are some errors.(1)I used the following
RM entries:Oracle_XA;xaosw;D:\Oracle\Ora81\precomp\lib\msvc\oraSQL8.lib D:\Oracle\Ora81\precomp\lib\msvc\oraSQX8.lib
D:\Oracle\Ora81\RDBMS\xa\ORAXA8.lib (2)The OPENINFO string in the ubbshm file
is:DEFAULT:TMSNAME=TMS_ORA TMSCOUNT=2 LMID=SITE1
BANKB1 GRPNO=1 OPENINFO="Oracle_XA:Oracle_XA+Acc=P/scott/tiger+SesTm=100+LogDir=.+MaxCur=5"(3)the
follow is the error message when I booted the servers:
.. 174841.GLOBALDB!BALC.852.2572.0: 07-26-2001: Tuxedo Version 8.0 32-bit Windows.
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:262: INFO: Standard main starting
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:466: ERROR: tpopen TPERMERR xa_open
returned XAER_RMERR
174841.GLOBALDB!BALC.852.2572.0: tpsvrinit: failed to open database due to
174841.GLOBALDB!BALC.852.2572.0: tpopen failed, tperrno: 16
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
174841.GLOBALDB!tmboot.480.548.-2: CMDTUX_CAT:825: ERROR: Process BALC at SITE1
failed with /T tperrno (TPERMERR - resource manager error) ...
Can anyone help? Thanks a lot!
Best Regards
LilyI found the answer myself in an earlier post.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by The Oracle Reports Team:
Reports 6i will connect to Oracle8i, however you need to connect over Net8 - i.e. on the database side, you need to set up the TNS listener to accept connections, and on the Reports side (which, incidentally, needs to be installed in a separate Oracle_home) you need to configure the tnsnames.ora file to connect to the 'remote' database (since it is in a different oracle_home, to all intents and purposes it may as well be on another machine - it's all considered 'remote').
Regards
The Oracle Reports Team http://technet.oracle.com <HR></BLOCKQUOTE>
null -
Registering a Partner application with Oracle SSO 10gR2
Hi Everybody
I'd like to ask a question around registering a partner application with Oracle SSO.
I have entered my home_url, logout_url and cancel_url e.g. home_url is https://vevopuitest1.co.uk/vevo_test1 and so on for the other fields.
When I save the details some information is automatically created e.g. Site Id, Site Token etc.
The bit that I am particularly interested in are the fields Single Sign-On URL and Single Sign-Off URL.
For my purposes these fields are respectively: https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_login and https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_logout
My questions are:
1. Where do these values come from?
2. Can I view them anywhere, say, in Oracle Directory Manager or using ldif queries?
I would like to be able to verify these values.
Many Thanks
AndyI'm afraid this won't answer your question completely, but AFAIK in principle it does not matter on which machine SSO is running, as long as it passes the user id and credentials properly through the HTTP Header. Even more: in practice it is very common to have SSO running on a different machine than where your app runs.
So what I would do is find out how to use ADF Faces with SSO. Perhaps someone else can provide pointers on that.
Jan Kettenis -
Forms 6.0 how to query clob column with oracle 9.2 DB
hi every body,
i made install for oracle 9.2 oracle DB every thing goes ok but when i made query in my form version 6.0 which have CLOB column the form closed automatically without any message?
and just for know when i run the same form with oracle 8.1.7 DB the form made query normally without any problem.
i want your help please.
Message was edited by:
mshaqalaihI know there was a problem in 6i where you would get a crash if your query returned more than {Max Length} characters of the field representing the CLOB column.
-
Using Java Access bridge (Accessibility) with oracle forms 6.0 client
I'm trying to use JAB (java Access bridge ) to capture events in oracle forms 6.0 client .
I've a Jinitiator 1.1.8 and JRE version 1.4x
I've configured JAB as per the installation guide . However the events don't surface in Java Monkey .
Has anybody encountered similar issue ? what is the solution for the issue ??
Also on one of the forums I read Jinitiator 1.3x and above is automatically recognised by Java Access bridge .
For jinitiator version less than 1.3 manual configuration is required . however I haven;'t been able to find any on the oracle forms KB
Also here is the excerpt from the link http://www.oracle.com/us/corporate/accessibility/faqs/index.html
Q: Are there special steps for using Java-based applications with assistive technology?
A: If the Oracle application is written in Java, such as JDeveloper or Oracle Forms (runtime), customers must first install the latest version of Sun's Java Access Bridge. The Java Access Bridge provides the integration with screen readers such as JAWS or SuperNova that support Java. You just download the Access Bridge and install it. Sun's AccessBridge 2.0x recognizes Oracle's JInitiator 1.3x and above so no manual configuration steps are necessary. The Access Bridge is available from: http://java.sun.com/products/accessbridge. At the time this document was written, Access Bridge 2.0.1 is the most current publicly available production release; Oracle recommends upgrading to this version. Sun's AccessBridge is bundled with Oracle Universal Installer (OUI) and can be found in the Java Runtime Engine (JRE). More information for configuring such products is in the respective product documentation, or on http://www.oracle.com/us/corporate/accessibility/products/index.html.
Edited by: 974810 on 4 Dec, 2012 1:10 AMODP.NET requires Oracle Client 9.2 or higher.
You can find additional information about ODP.NET from the FAQ:
http://www.oracle.com/technology/tech/windows/odpnet/faq.html
and the ODP.NET homepage:
http://www.oracle.com/technology/tech/windows/odpnet/index.html
Hope that helps,
Mark -
Using long vs. clob datatype with Oracle 8.1.7 and interMedia
I am trying to determine the best datatype to use for a column I
wish to search using the interMedia contains() function. I am
developing a 100% java application using Oracle 8.1.7 on Linux.
I'd prefer to use the standard JDBC API's for PreparedStatement,
and not have to use Oracle extensions if possible. I've
discovered that there are limitations in the support for LOB's
in Oracle's 100% java driver. The PreparedStatement methods
like setAsciiStream() and setCharacterStream() are documented to
have flaws that may result in the corruption of data. I have
also noticed that socket exceptions sometimes occur when a large
amount of data is transferred. If I use the long datatype for
my table column, the setCharacterStream() method seems to
transfer the data correctly. When I try to search this column
using the interMedia contains() function, I get strange
results. If I run my search on Oracle 8.1.6 for Windows, the
results seem to be correct. If I run the same search on Oracle
8.1.7 for Linux, the results are usually incorrect. The same
searches seem to work correctly on both boxes when I change the
column type from long to clob. Using the clob type may not be
an option for me since the standard JDBC API's to transfer data
into internal clob fields are broken, and I may need to stick
with standard JDBC API's. My customer wishes to purchase a
version of Oracle for Linux that will allow us to implement the
search capability he requires. Any guidance would be greatly
appreciated.I've finally solved it!
I downloaded the following jre from blackdown:
jre118_v3-glibc-2.1.3-DYNMOTIF.tar.bz2
It's the only one that seems to work (and god, have I tried them all!)
I've no idea what the DYNMOTIF means (apart from being something to do with Motif - but you don't have to be a linux guru to work that out ;)) - but, hell, it works.
And after sitting in front of this machine for 3 days trying to deal with Oracle's, frankly PATHETIC install, that's so full of holes and bugs, that's all I care about..
The one bundled with Oracle 8.1.7 doesn't work with Linux redhat 6.2EE.
Don't oracle test their software?
Anyway I'm happy now, and I'm leaving this in case anybody else has the same problem.
Thanks for everyone's help.
Maybe you are looking for
-
Sync music to multiple playlists in iPod Shuffle
iPod Shuffle 3rd Gen I have created 2 playlists under music in the iPod Shuffle. I can't find a way to sync songs with a certain playlist. I can only sync it at the top level Music. I don't want to have to copy all the songs to music and then select
-
Hello I run Portal 7.0 and have set up my ADS to use in the ESS by displaying travelforms. After following the configurationguide, I get this error message running the: /AdobeDocumentServies/Config: Exception in method rpData. With the response: HTTP
-
I'm writing an application to play MP3, But when I import javax.media.* I has an exception: D\cuong2012\btJava\MP3\JPlay\JavaPlayer.java:16: package javax.media does not exist. How can I gat javax.media. package??? I using window 2000, JDK1.5.0_01...
-
How do you move a file from side of the screen to the other side?
-
How to play region free?
I have a Macbook with a combodrive (the one that only reads dvd's and only burns cdr disks). But I import a lot of movies, can I make the drive region free or what kind of sotfware should I use if I switch a lot between movies with a different region