NetWeaver Administrator reports "SLDirectory is not accessible"

Hi,
NetWeaver Administrator (http://host:port/nwa) on our SP12 XI installation reports:
System Landscape Directory is not accessible
Only local system can be administered
The SLD is actually on the same server and is working correctly, even accoding to the WebDynpro Content Administration.
Anyone know what might be wrong?
Thanks,
Thorsten

Hi Dmitriy,
the setup of the NetWeaver Administrator connections to SLD is described in the Monitoring Setup Guide. There is a quick link in Service Marketplace /nwa -> media library -> documentation -> Monitoring Setup Guide.
Basically the steps to connect NWA to SLD are the following (if you have already registered the systems of your system landscape to SLD and have set up the monitoring for the systems):
- In the Visual Administrator of the Central Monitoring System (CEN)(NWA-System) under Server->Services-> SLD Data Suppliers you have to enter the CIM Client Generation Settings (http connection to SLD with User/PWD). Mark the applications "sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar" and
"sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar" (This enables the NWA to get data from SLD.)
- In the ABAP Engine of CEN, the RFC connection SAPSLDAPI must be maintained, the connection data for SLD must be entered in transaction SLDAPICUST. (This connection helps entering monitored systems in SLD.) Additionally you require a JCo RFC Connection which points from the NWA system to the RFC connection SAPSLDAPI of CEN. Create this connection in the Visual Administrator of the NWA system under Server -> Services -> JCo RFC Provider.
- SLD gateway information has to be entered in transaction RZ70 of the Central Monitoring System. (With this transaction the data transport from CEN to SLD is managed.)
- For each administered system you can store the login data with help of the Destination Service of the NWA system. (If you don't do this you get login popups in NWA for all administered systems). You can enter the login data in Visual Administrator -> Server -> Services -> Destinations as described in the documentation.
All the steps are described in detail in the Monitoring Setup Guide.
Good luck
Bye,
Astrid

Similar Messages

SLD is not accessible in our Netweaver Administrator

Hi,
Do u know why the SLD is not accessible in our SAP Netweaver Administrator? What steps should be taken to solve this problem?
Please help.
Thanks,
Jennah

Hello Jennah ,
To resolve issue :
Please check the sld data supplier is running or not ?
Setting Up the SLD Data Supplier (J2EE):
http://help.sap.com/saphelp_nw04/helpdata/en/ea/cd2e807e0e45bf9da67354f452fc05/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/dc37520bdf4b48bb8f6d4329f073d5/frameset.htm
Regards ,
Santosh

Oracle Report Server Not Accessible

Hi Folks,
I'm facing a series of issues with Oracle reports server 11g. I'l list the issues one by one.
1. I'm not able to start the weblogic server from the domain which i've created for Reports. It gives me authentication error. I've tried clearing tmp directory, clearing temp directory and creating a boot.properties in the security folder. But nothin seems to work.
2. I'm not able to start the report server from the instance path C:\Oracle\Middleware\asinst_1\bin\opmnctl.bat. The contents of opmnctl.bat is as follows
@ECHO OFF
SETLOCAL
set PERL5LIB=
set JAVA_HOME=C:\Oracle\Middleware\jdk160_29\bin
set ORACLE_HOME=C:\Oracle\Middleware\Oracle_FRHome1
set ORACLE_INSTANCE=C:\Oracle\Middleware\asinst_1
set OpmnService=OracleProcessManager_asinst_1
"C:\Oracle\Middleware\Oracle_FRHome1\opmn\bin\opmnctl.bat" %*
when i run this from cmd i get all the components as alive but i'm not able to access the reports path with the url. (http://domainname:7003/console or /em).
this says connection refused.
3. When i try to access the url http://domainname:8888/reports/rwservlet gives me apache bridge error. I've been trying all the things given in google for the past 1 week but still its not working.
This is my Oracle Forms and Repots Installation log:
Middleware Home Location: C:\Oracle\Middleware
 Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
 Oracle Instance Location: C:\Oracle\Middleware\asinst_1
 Oracle Instance: asinst_1
 Domain Option: Create Domain
 Domain Name: Sapphire
 Domain Home: C:\Oracle\Middleware\user_projects\domains\Sapphire
 Domain Host Name: PC201845.cts.com
 Domain Port No: 7001
 User Name: weblogic
 Automatic Port Detection: true
 Administrator Console: http://PC201845.cts.com:7001/console
 EM Console: http://PC201845.cts.com:7001/em
 EMAgent URL: http://PC201845.cts.com:5155/emd/main
 Forms URL: http://PC201845.cts.com:8888/forms/frmservlet
 Reports URL: http://PC201845.cts.com:8888/reports/rwservlet
I'm not able to login to any of this url.
pls help with the issue.
P.S - I'm able to start weblogic server from base_domain but not from Sapphire domain which i created during installation of reports 11g.
I need a way to start the Weblogic server from Sapphire Domain and also start reports server and access the reports url.

TemTesh wrote:
After machine shutdown without shutdown IAS server, Oracle application server report service can not restart.
below is the error
11/2/10 5:26 AM NfsServer: (TCP:Nfs-6) Exception
oracle.ifs.common.IfsException: IFS-71002: I/O error.
java.net.SocketException: Connection resetAnd this seems to be the problem. Missing NFS share? TCP=transmission control protocol. NFS=network file server.
For some reason (very like due to how it has been configured), the s/w attempts to use a NFS share - and uses the TCP wire protocol. This NFS share is not mounted or not available.
Check the NFS server (it needs to be up and exporting that share), there has to be network connectivity between the report server and the NFS server, and the report server needs to have the required config and access permissions for mounting that NFS share.

System Landscape Directory is not accessible on NW04 Sneak Preview

Hi,
I installed Netweaver sneak preview Full Java edition on a server and when i access the NW administrator at the url http://...:50000/nwa.
In "Overview" of system management there are 2 warnings :
System Landscape Directory is not accessible
and
Only local system can be administered
But SLD is working i can assess it on http://...:50000/sld
Can anybody help me ...?

Hi,
NWA works out of the box for the local Java stack. No SLD needed. Its just an information.
The second flavor of NWA is to act as a central monitoring tool. In that case, some things have to be configured (e.g. the connection between NWA and the SLD). Information about that can be found in SMD service.sap.com/nwa, or probably here
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/11c7653d-0a01-0010-dc92-de6e5493e8f3 [original link is broken]
(page under construction).
Best regards
Christoph

Livecache lock server not accessible after system refresh

Hello,
I have performed a refresh of SCM + livecache from production to QA when starting the livacache from LC10 i get a message Livecache lock server not accessible. The livecache is started but when i look at the status there is a warning SQL access not possible.
I did an export of the config table and reimport and the server named are correctly defined for:
LCA
LDA
LEA
From the administration report of LCA
Initialize livecache
Follow-up Processing: /SAPAPO/DELETE_LC_ANCHORS
Start Livecache
Follow-up Processing: SLCA_LCK_SYNCHOWNERS
By running those program in se38
SLCA_LCK_SYNCHOWNERS (Livecache lock server not accessible)
SLCA_NON_LC_RELEVANT_CLIENT (Could not create a connection to livecache)
I checked and the relevant client is selected.
When i check the alert monitor from livecache - lca - connectivity - dbmrfc and native sql is in red with the following message:
SQL Statement Execution Instance Online, but no SQL access possible.
Also from SM21 i have errors saying Database error -4025 at CON
Let me know if you already encountered this issue and how it was resolved.
Thank you,
Martin Mayer
Edited by: Martin Mayer on Jan 4, 2012 4:02 PM
Edited by: Martin Mayer on Jan 4, 2012 4:07 PM

I have checked that tread already the thing is when performing the check In db59, I´ve the LCA,LDA,LEA it fails.
1. Connect. test with "dbmcli db_state"                         Successful
2. Connect. test with command mode "dbmrfc db_state"            Successful
3. Connect. test with session mode "dbmrfc db_state"            Successful
4. Connect. test with "native SQL" ( LCA )                     No connection
   SQL Code: 4025
Edited by: Martin Mayer on Jan 4, 2012 5:26 PM

An error The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered after launching a ps1 script from cmd file.

I'm trying to load sharepoint script from *.cmd file.
I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
My cmd file is:
Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
My sharepoint file 1.ps1 is:
$snapin="Microsoft.SharePoint.PowerShell"
if ($action -eq $null -or $action -eq '')
{ 
# Action by default is complete uninstallation.
$action='uninstall'
$uninstall = $true
else
$action = $action.ToLower()
switch($action)
{ $_ -eq "uninstall" } { $uninstall = $true; break }
{ $_ -eq "removesolution" } { $removeSolution = $true; break }
{ $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
{ $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
Check the Sharepoint snapin availability.
if (Get-PSSnapin $snapin -ea "silentlycontinue")
Write-Host "PS snapin $snapin is loaded."
elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
Write-Host "PS snapin $snapin is registered."
Add-PSSnapin $snapin
Write-Host "PS snapin $snapin is loaded."
else
Write-Host -f Red "Error: PS snapin $snapin is not found."
Exit -1
$url = "http://pc1/sites/GroupWork/"
$site= new-Object Microsoft.SharePoint.SPSite($url )
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates){ write-host $child.Name " " $child.Title} 
$site.Dispose()
The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
PS C:\2> .\1.ps1
PS snapin Microsoft.SharePoint.PowerShell is loaded.
GLOBAL#0 Global template
STS#0 Team Site
STS#1 Blank Site
STS#2 Document Workspace
MPS#0 Basic Meeting Workspace
MPS#1 Blank Meeting Workspace
MPS#2 Decision Meeting Workspace
MPS#3 Social Meeting Workspace
MPS#4 Multipage Meeting Workspace
CENTRALADMIN#0 Central Admin Site
WIKI#0 Wiki Site
BLOG#0 Blog
SGS#0 Group Work Site
TENANTADMIN#0 Tenant Admin Site
{248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
{95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
{7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
PS C:\2>
I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
the cmd file but without success.
My PowerShell has version 2.0:
PS C:\2> $psversiontable
Name Value
CLRVersion 2.0.50727.5477
BuildVersion 6.1.7601.17514
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
After launching the script from 1.cmd file i get an errors:
C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
PS snapin Microsoft.SharePoint.PowerShell is registered.
The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
tered.
Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
ration.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
No xml configuration files loaded.
Unable to register core product cmdlets.
Could not read the Types files in the folder CONFIG\PowerShell\types.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
"No Types files Found."
Could not read the Format file in the folder CONFIG\PowerShell\format.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
No Format files Found.
PS snapin Microsoft.SharePoint.PowerShell is loaded.
New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
on at http://Pc1/sites/GroupWork/ could not be found. Verify t
hat you have typed the URL correctly. If the URL should be serving existing con
tent, the system administrator may need to add a new request URL mapping to the
intended application."
At C:\2\1.ps1:48 char:18
+ $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
+ CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
tionException
+ FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
Shell.Commands.NewObjectCommand
Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.

I have an answer for my problem: for solving a problem I've made several steps:
1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
This user has been added as farm administrator in the wizard.
This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
the Management Shell of Sharepoint.
3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
(my main account) in the Config database
4. Run CMD file only from Start->Run menu.
runas /user:Domain1\UserAccount1 "C:\1.cmd".
Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
Thanks all for help.

Report Layout is not same for excel and odf

I have a footer created in my report layout
When i export the report to pdf it displays at the end of the page but when I export it to an excel
the footer displays just below my report data and not at the end
Should there be a different layout for pdf's and excel's

The order of extracted records can no be assumed to be constant, any SQL optimizer can change behavior, even without any wide upgrade, but a single database or kernel patch as well as many operation of database administrator can change the order, as well as a change of user behavior, if they fill now another field in selection. So it is good practices to always sort (or use sorted type) internal table extracted or use a ORDER BY clause (provided there is an index in database, else do not)
Read online documentation of SELECT statement clause ORDER BY
The order of the rows in the result set refers to all columns that are not listed after ORDER BY, is undefined, and can be different in repeated executions of the same SELECT statement.
There are also some [MANY > 1000] OSS notes on the subject (look for your database, e.g. 1858427 - Incorrect Sorting of SQL-Select Statement, 1859655 - The result set of an SQL-Select Statement may not be sorted, 1858479 - Result set of select statement is not sorted, 1858569 - Incorrect access to result set of SELECT statement, etc.)
Also if you sort an internal table and require records with same key values to keep their respective order, use the STABLE clause.
Regards,
Raymond

Cisco ACS 4.2 TACACS+ Administration report - Help!

we had some switches mysteriously reloaded. Upon investigation, TACACS+ Administration report show no user login to the device, no command was issued, and the reason = reload.
how could this happen?

Guna,
Tacacs+ Does not use VSAs.
Radius uses VSAs.
This is what I found online:
http://198.152.212.23/css/P8/documents/100106731
See if this helps.
It has an example associated for server configuration.
In ACS 4, you need to use the shell exec and priv-lvl=<value>.
(Similar to Cisco IOS)
Regards
Ed

Shared Variable Deployment not accessible in Build Specification

Hi everyone,
I have a large project developed in LV 8.6.1 from which I executed numerous applications. I converted the project in LV 11 sp1f1, everything works well in code, everything is saved.
I wanted to build executable without cod change for LV 11 here is what I found:
Build the executable with Build Specifications inherited from LV 8.6 for which I checked on Use Labview 8.x file layout in Advanced. My application programmatically deploys all internal shared variables and when I wanted to access the Shared Variable Deployment in project in Build Specification then labview locked and I have to kill LV. Other time I did not access the Shared Variable Deployment and I start building executable when it looks the build progressing similar as in LV8.6 and last step before popping the attached error all the saved files in the build location were deleted.
I set up a build specification just for this LV 11. Again I wanted to access the Shared Variable Deployment and again labview is looping something from which I had to kill labview. I opened it again, I skipped the shared variable deployment line and I build the application. Because my application programmatically deploys shared variables I included in builder the lvlib where shared variables belong. The build files does not includes this time as output the file *.lvlib for which my inherited LV8.6 code programmatic deploys shared variables.
My question is should I change the code (very large code) taking out the programmatic variables deployment and to relay on the build executable to do deploy them then what should I do with Shared Variable Deployment line in Build Specification which for my large application is not accessible or is any way to still use the shared variable as in LV8.6 but for which I need *.lvlib in build location.
Another important issue: when I launched my application built as I showed in previous second case, first thing that I see is that my application is not able to save errors (I have a log file where I save different drivers or communication errors). Any idea why application even without shared variable deployed is not able to write a text file? I am administrator of my computer with all rights.
Thank you,
Virginia

No, I am not able to close Labview because of the windows error with only one button to close application. The application is correct executed. Next time when I start this project it is asking me if I want o recover even if I accept to recover it looks what I had last time it does not save.
For my application also I am building a VI without diagram built as source distribution for which I set in my builder this top vi and I excluded everything from the project because my application copies instances at the run time of this vi as many times as hardware modules I have in the system and also I have this vi included in my application (for the content of this vi). My vi contains interfaces for hardware configuration as well as drivers functions call for each hardware module I have to control in my application. Everything is good building this vi, but in less then one minute after the build is executed and build interface closes again I have the windows error which force me to close project. Next time when I open project I did not see the option to recover the project.
In the mean time I received second message and I wonder if you refer to files names or to folder names or all together. I checked and the maximum size is 122 characters in the vi paths.
Thank you,
Virginia

Statement is not accessible

Hi Anybody ,
i am getting an error 'Statement is not accessible'
REPORT ZZDEMO_EXPORT.
TABLEs : NAST.
DATA : i_vbeln TYPE VBAK-VBELN.
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: lf_formname TYPE tdsfname.
DATA: XSCREEN(1) TYPE C.
DATA: RETCODE LIKE SY-SUBRC.
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
 CHANGING lf_retcode.
IF lf_retcode NE 0.
 return_code = 1.
ELSE.
 return_code = 0.
ENDIF.
ENDFORM. "ENTRY
data: GT_LINES like tline OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'READ_TEXT'
EXPORTING
 ID = 'ZPRI'(002)
 LANGUAGE = 'B'
 NAME = '123456'
 OBJECT = 'VBBK'
TABLES
 LINES = GT_LINES
EXCEPTIONS
 ID = 1
 LANGUAGE = 2
 NAME = 3
 NOT_FOUND = 4
 OBJECT = 5
 REFERENCE_CHECK = 6
 WRONG_ACCESS_TO_ARCHIVE = 7
 OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM processing USING proc_screen
 CHANGING cf_retcode.
i_vbeln = NAST-OBJKY.
LF_FORMNAME = 'ZCFR_EXPORT_RAJIVPLASTIC2'(001).
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 FORMNAME = lf_formname
 IMPORTING
 FM_NAME = LF_FM_NAME
 EXCEPTIONS NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3.
CALL FUNCTION LF_FM_NAME
EXPORTING
 i_vbeln = i_vbeln.
ENDFORM. "PROCESSING
How can I solve that problem ?
Thanks & Regards
Ambrish Dwivedi

Hi,
I have changed the source code , please check it.It is working fine.
TABLEs : NAST.
DATA : i_vbeln TYPE VBAK-VBELN.
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: lf_formname TYPE tdsfname.
DATA: XSCREEN(1) TYPE C.
DATA: RETCODE LIKE SY-SUBRC.
data: GT_LINES like tline OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'READ_TEXT'
EXPORTING
ID = 'ZPRI'(002)
LANGUAGE = 'B'
NAME = '123456'
OBJECT = 'VBBK'
TABLES
LINES = GT_LINES
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
CHANGING lf_retcode.
IF lf_retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
FORM processing USING proc_screen
CHANGING cf_retcode.
i_vbeln = NAST-OBJKY.
LF_FORMNAME = 'ZCFR_EXPORT_RAJIVPLASTIC2'(001).
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = lf_formname
IMPORTING
FM_NAME = LF_FM_NAME
EXCEPTIONS NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
CALL FUNCTION LF_FM_NAME
EXPORTING
i_vbeln = i_vbeln.
ENDFORM. "PROCESSING
Regrads,
Suvajit

Compile Error Statement is not accessible

Hi All,
I have report in SAP 4.7 . when i do syntax check on it it give a warning -"statement is not accessible."
But same thing when we compile we are getting as Syntax error in ECC 6.0 .
when I compile it, it prompts
Include ZHRIPENR
Statement is not accessible.
My REPORT program -
REPORT ZHRIBANK NO STANDARD PAGE HEADING
 LINE-SIZE 80
 LINE-COUNT 65.
START-OF-SELECTION.
INCLUDE ZHRIPENR.
END-OF-SELECTION.
My INCLUDE program -
*INCLUDE ZHRIPENR.
PERFORM BATCH_INIT.
FORM BATCH_INIT.
ENDFORM. " (BATCH_INIT)
when I compile it, it prompts
Include ZHRIPENR
Statement is not accessible.
Please let me know how can i proceed .
Cheers,
Reddy

Hi ..
The Reason may be bcoz you are Placing the FORM statements inside the Include.
Just Remove the FORMS from the Include and Place the in ur Main program in the Last.
Note: Subroutine definitions has to be in the end of the code.
REWARD IF HELPFUL.

Sap server url is not accessible..Portal is not getting started

Hi all,
I have netweaver 2004 and portal on aix02.
I was getting some error while accessing one of the link of the portal.
So through OS admin I gave command stopsap.
and again started sap server using startsap all
Still my sap url is not accessible.
I am getting error as "Page can't be displayed"
Following is the output of the operations I performed through OS:
124> stopsap
Checking db Database
Stopping the SAP instance SCS01
Shutdown-Log is written to /home/jetadm/stopsap_SCS01.log
Instance SCS01 was not running!
Database not running
Running /usr/sap/JET/SYS/exe/run/stopj2eedb
Trying to stop database ...
Log file: /home/jetadm/stopj2eedb.log
The database state is offline.
/usr/sap/JET/SYS/exe/run/stopj2eedb completed successfully
ctsaix02:jetadm 125> startsap all
Checking db Database
Starting SAP Instance SCS01
Startup-Log is written to /home/jetadm/startsap_SCS01.log
Instance on host ctsaix02 started
Can you please help me to SOLVE this issue?

Thanks Supriya,
I have pasted logs below:
Can you please help?
logs startsap_JC00.log=>
Trace of system startup/check of SAP System JET on Wed May 23 16:06:13 CDT 2007
Called command: /usr/sap/JET/SYS/exe/run/startsap
Starting SAP Instance JC00
SAP-R/3-Startup Program Rel 640 V1.8 (2003/04/24)
Starting at 2007/05/23 16:06:13
Startup Profile: "/usr/sap/JET/SYS/profile/START_JC00_ctsaix02"
(332024) SETENV LD_LIBRARY_PATH=/usr/sap/JET/JC00/j2ee/os_libs:
Setup Environment Variables
(332024) SETENV SHLIB_PATH=/usr/sap/JET/JC00/j2ee/os_libs:
(332024) SETENV LIBPATH=/usr/sap/JET/JC00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/JET/SYS/exe/run
Execute Pre-Startup Commands
(332024) Local: rm -f jc.sapJET_JC00
(332024) Local: ln -s -f /usr/sap/JET/JC00/j2ee/os_libs/jcontrol jc.sapJET_JC00
Starting Programs
(438468) Starting: local jc.sapJET_JC00 pf=/usr/sap/JET/SYS/profile/JET_JC00_CTSAIX02
(332024) Waiting for Child Processes to terminate.
(332024) **** 2007/05/23 16:06:13 Child 438468 terminated with Status 0 . ****
(332024) **** No more Child Processes to wait for.
(332024) Parent Shutdown at 2007/05/23 16:06:13
Execute Post-Shutdown Commands
(332024) Exiting with Return-Code 3. (No more child processes)
Startup of Instance failed
~

SCCM 2012 Console not accessible - SMSAdminUI.log - Error Code : ProviderLoadFailure

Hello Team,
 The site server which was working fine is now not accessible, unable to connect the console "Configuration manager cannot connect to the site"
* It is a standalone Primary with provide installed on the same server
* Recently Upgraded to R2 CU4. Base OS is Win 2K8 R2 Ent, SQL server is 2012
* I am able to logon to the SQL server and access the SCCM database and execute a SQL query
* I did try to connect to the WMI on the SCCM server using : wbemtest and connect to the SMS_ProviderLocation ()
* Tried restarting the server , still not luck
Any assistance will be of great help.
Following is the snippet of the error in the SMSAdminUI.log.
=============================================================
Error Code:
ProviderLoadFailure
\r\nSystem.Management.ManagementException\r\nProvider load failure \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
 at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
 at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()\r\nManagementException details:
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'XXX'";
ProviderName = "WinMgmt";
\r\n
==========================================================================
Following is the error that I see in the Event log of the server
Transport error; failed to connect, message: 'The SMS Provider reported an error.'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException\r\nThe SMS Provider reported an error.\r\n at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath) at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nConfigMgr
Error Object: instance of __ExtendedStatus { Operation = "ExecQuery";
==========================================================================

When updating to CU4, did you have the required permissions to update the database? I have seen similar errors when this has not been the case.
Have a look in
C:\Windows\Temp\CM12-R2CU4-KB3026739-X64-ENU.log
and see if you have any errors like this:
The EXECUTE permission was denied on the object ‘fnIsPrimary’,database
‘CM_P01’, schema ”dbo"
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

SCOM 2007 R2 Reporting space is not launching

Dear Experts,
My Report layer is not launching from SCOM 2007 Operation Console since 1 week.
Recently I did change the password for Data Warehouse Read and Write accounts also I have updated both passwords in the Administration Space at Account section for the both Accounts.
2nd thing i have updated the DW Read account pwd with the Service name SQL Reporting Services (MSSqlServer).
Still I am getting the Error when I launch the Reporting space from the Operation Manager Console and the error is stated that Login failure and unable to login to the Data Warehouse database.
Please let me know what else place I have missed to update the new pwd here ??
Saravana Raja

check and make sure the following procedures were done to update the passwords:
http://blogs.technet.com/b/randymonteleone/archive/2010/03/12/changing-password-on-scom-data-warehouse-run-as-accounts.aspx
hope this helps!
Scott Moss MVP (Operations Manager) President - System Center Virtual Users Group |Vice President - Atlanta Southeast Management Users Group (ATL SMUG)
Please remember to click “Mark as Answer” on the post that helps you!
my new blog om2012.wordpress.com

Why site database server for Central Admin site not accessible?

Hello everyone,
I've this issue where; when connecting a primary site to existing central administration site; setup prerequisite checker
continue to notify it cannot establish connection to SQL server having central administration site database. The SQL server
having central site database is installed locally on the server central administration site is hosted on. Both servers
(central administration site server, the new server to host child primary site required to join that central administration
site) having following configuration:
A. Central Administration site server, with site database server installed locally:
Name: HQCAS
OS: WS 2008 R2 SP1, fully patched.
SQL Server: SQL Server 2008 R2 with SP2. Correct required SQL server collation set supported by CM2012.
SQL Server named instance: CASDB
Local firewall ports opened: 1433, 4022 (via inbound rules created in group policy, same GPO applies to primary site
server)
SQL Server broker service Enabled: True.
TCP/IP: All dynamic ports left blank to support static port 1433.Static port 1433 configured for all IPs.
IP Address: 10.1.1.250/8
Local SAM: Both server computer accounts added to local 'Administrators' group on both servers.
Domain service account: svcCASDB
SPNs registered: 2x, one for HQCAS hostname on instance CASDB on port 1433, second for FQDN for HQCAS on instance
CASDB on port 1433.
SQL Server Logins: Security group containing both computer accounts for HQCAS & STPRS. Both account having sysadmin SQL
server role assigned.
SQL Server browser service running.
B. Primary site server, with SQL server installed locally: to join HQCAS CM2012 hierarchy:
Name: STPRS
OS: WS 2008 R2 SP1, fully patched.
SQL Server: SQL Server 2008 R2 with SP2. Correct required SQL server collation set supported by CM2012.
SQL Server named instance: CM12PRIMARY
Local firewall ports opened: 1433, 4022 (via inbound rules created in group policy, same GPO applies to central
administration site server)
SQL Server broker service Enabled: True.
TCP/IP: All dynamic ports left blank to support static port 1433.Static port 1433 configured for all IPs.
IP Address: 172.168.1.250/16
Local SAM: Both server computer accounts added to local 'Administrators' group on both servers.
Domain service account: svcCASDB
SPNs registered: 2x, one for STPRS hostname on instance CM12PRIMARY on port 1433, second for FQDN for STPRS on
instance CM12PRIMARY on port 1433.
SQL Server Logins: Security group containing both computer accounts for HQCAS & STPRS. Both account having sysadmin SQL
server role assigned.
SQL Server browser service running.
Tests performed:
Telnet to/from both HQCAS/STPRS on ports 1433, 4022 establishes connection. Please help

Hello friends,
My finding it finally is....there wasn't any configuration issue as I mentioned above.
I'm using an evaluation edition of SQL Server 2008 R2; it just allows default instance (MSSQLSERVER) to be used, not a named instance.
The confirming test for this was...I re-installed SQL Server with all the same settings except changing from a named instance to default; once I finished applying service pack 3. I could initiate WSUS 3.0 SP2 x64 setup and point it to use this SQL server.
WSUS setup completed without any errors. This was not happening when named instance was all configured properly. It was just not accessible from outside.
Well this is what my finding is. For lab environment of CM2012 it suffices the need.
Regards,
Shahzad.

NetWeaver Administrator reports "SLDirectory is not accessible"

Similar Messages

Maybe you are looking for