NetWeaver Administrator shows Instance status as yellow

I see my Java Instance status in NWA 7.1 under Java EE Instances but all that is shown is the System Nr, Host, and status, which is a yellow triangle.
There are no OS Process PIDs, or anything.  Where is the information stored?  Can I fix this somehow (I hope so).  This happened after a Homogeneous System Copy.

Hi,
After Java system copy you need to modify instance ID in config tool.. This is a required step..
regards,
Pravash Raikar

Similar Messages

  • DSCC showing instance status as stopped or unknown error

    Hello All,
    Am a newbie and learning DSEE 6.3 at present. Recently SSL renewal happened for all the servers in the production environment and once after that DSCC showing 2 instance as stopped or unknown error. While checking via command prompt everything looks fine, seems to be DSCC having communication issue with specific instance which are on different servers. How you are advising here? Does DSCC restart will help here or particular instance need to unregistered and register again?
    Thanks,
    Yathi

    Hi
    You should un-register your instances from DSCC and register them again so that their certificates are updated in DSCC registry.
    Carole.

  • Central Administration shows error 26 - A network-related or instance-specific error occurred while establishing a connection to SQL Server

    Hello 
    i Follow
    this Article to Config FBA , BUT after Step 3 , My Central Administration shows an Error : 
     A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
    is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 – Error Locating Server/Instance Specified)
    Correlation ID: 89651359-9c57-4241-8254-eb3be052c4f0
    Now , i cannot access to my Central Admin Setting , but my site Collections works well....
    i Rollback  all setting but  no Effect !!!!!
    i execute iisreset but nothing !!!!
    what should i do?
    please help me.. Thanks in Advanced
    When i was checking EventViewer , i saw an Event log    :
    The Forefront Identity Manager Service cannot connect to the SQL Database Server. The SQL Server could not be contacted. The connection failure may be due to a network failure, firewall configuration error, or other connection issue. Additionally,
    the SQL Server connection information could be configured incorrectly. Verify that the SQL Server is reachable from the Forefront Identity Manager Service computer. Ensure that SQL Server is running, that the network connection is active, and that the firewall
    is configured properly. Last, verify the connection information has been configured properly. This configuration is stored in the Windows Registry.
    Is there any relation between this message And my Problem!!!???

    hi Mr Thuan
    Soldier
    i checked
    some of your Solution like SQLService (Was OK) , Allow Remote connection (was OK & has check mark), Restart SqlService (Done Successfully),  Network Card Driver (my Connection is OK) before , but didnot check SQL
    Service account & i will do Soon,
    but
    i did not any changes on Firewall or IP ... i change IIS setting (through
     this
    Article ) ,
    Do these settings have any effect on IP or  firewall ?
    thanks
    mohamamd
    MBS - social.technet.microsoft.com Forum

  • How to stop the process chain showing status as yellow but no process step

    Dear Friends,
    How to stop the process chain showing status as yellow but no process step is running in that process chain.
    We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
    Please guide me.
    Thanking you in advance.
    Regards,
    Shubhangi

    Hi,
      At times even I have faced this situation.  During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
    Regards,
    Raj

  • Instance Status Yellow on SAP MMC Console

    Dear Experts,
    We are installing NW 7.0 dialog instance on Windowsx64 bit platform, Central instance is running on Aix64 bit,
    NW 7.0 Java add-in has installed on Central instance,
    I want to start only abap instance on new windows application server, i set rdisp/j2ee_start parameter to "0",
    Now java process do not start but SAP mmc console status is yellow because of it, disp+dowk process message is J2EE status info unavaliable,
    How can unistall Java instance from newly instaled application server ?
    Best Regards

    Hi,
    Regarding the MMC display "J2EE status info unavailable", as you don't want a dual stack remove the entry icm/HTTP/j2ee_0 from the instance profile and set the parameter 'is/HTTP/default_root_hdl = abap'.
    Please reboot your system (bounce OS) to see if this helps.
    If this does not help please try this.
    1. Stop the SAP service
    2. Open a command prompt
    3. Go to usr\sap\<SID>\...\exe\run
    4. call 'sapstartsrv.exe -t' from the command line
    5. Confirm the dialog window
    6. Start the service again
    Best Regards
    Niraj

  • OEM 10g shows DB Instance status as unmounted

    Hi All,
    I have recently refreshed a DB from Prod instance but did not create a black out in OEM before starting the refresh of DB. After the refresh, the status of DB in OEM is showing up as "Status: Unmounted Details:The instance is open
    The instance has been started in no-mount state" but it shows the listener status as "UP" and also shows the status as "UP" in the general section. I have tried clearstate agent and upload which did not work. I have also tried cleaning up all the collection files, upload files and state files and restarting the agent by unsecuring and securing it again but none of this worked. Does anybody have any ideas how to trouble shoot this?
    Thank you.

    Search Bug 6073721 in support. That fix worked for me using OEM 10.2.0.5 on AIX.
    To summarize: Find the metric and policy settings for the DATABASE (not the global ones for OEM) and change the value for unmounted to 1 (or anything > 0). Then go back to the database home screen and refresh. The fix might not take effect immediately, so try the refresh more than once.

  • DSO reporting icon was displayed although load status was "Yellow"/"Red"

    Hi,
    Whilst loading a DSO, I observed that the reporting icon was displayed even when the load was in status "Yellow" and in one instance, the reporting icon displayed even when the status of the load to the DSO was "Red" i.e it had failed. I would reckon that the DSO reporting icon would be displayed only after the load was successful including the activation step. Why then was the reporting icon displaying when the load was not successful.? Is this an SAP bug.
    Any thoughts, gurus!
    Thanks
    Kevin

    Hi,
    I don't understand this. In a Standard DSO if the Quality Status is set to Automatic then the report shows as Green in the Quality Status Icon. However, data is still in the "New Data Table" and is not yet updated in the Active data table/change log unless the activation is done. If the Activation is done, only the will the data be available in the Active Data table/Change log.
    It is only afther this data is available that the reporting icon is displayed.
    If the Qualilty status is Yellow/Red the activation cannot be done. In whcih case there is no question of data being available in Active Table/Change log and hence the reporting icon should not be displayed.
    Therefore, I am not able to understand the anomalous behavior of the display of the reporting icon even when the Qualtiy Status is Yellow/Green
    @Experts: Is there something that I am missing
    Thanks
    Kevin

  • CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red, what is this? it isn't in the manual

    CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red in a pattern, red off then red red, Our AP isn't working it won't show up on our Cisco WLC 2125 anymore and this is the LED indicators, I've checked in the manual and this combination of LEDs do not exists??

    No cisco web is working perfectly.
    do you have a valid CCO id with smarnet contract ?? then only you can download new IOS for AP:
    Autonomous AP image:
    http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=284180979&release=12.4.25d-JA2&relind=AVAILABLE&rellifecycle=ED&reltype=latest
    LAP AP image:
    http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=280775090&release=12.4.25e-JAP&relind=AVAILABLE&rellifecycle=ED&reltype=latest
    Regards

  • KM iviews, KM Content, Index Administration showed Portal Runtime error

    Hi Experts,
    We recently tried migrating our BI production portal to new hardware. The Portal version was not changed just it was migrated from one server to another. After migration the portal restarted properly but the KM iviews, KM Content and Index Administration showed "Portal Runtime Error".
    We restarted the portal several times but still the same. Also the KM services were running.
    We had migrated the BI development portal in similar manner couple of months back but it did not showed any such error. It was successful in first attempt.
    Can anyone please suggest what must have gone wrong and how can this be corrected? Is there any monitoring or tracing tool we can use to check this. Please suggest.
    Thanks & Regards,
    Seema Rane.

    Hi Ricardo , Lorcan,
    Thank you for the prompt reply. Following is the default trace I found on the server:
    Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: sap.com/com.sap.netweaver.coll.appl.room', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: sap.com/com.sap.netweaver.coll.appl.room
         at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:527)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4367)
         at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:589)
         ... 46 more
    Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: SAPJ2EE::sap.com/xappscprxrpmui~collroomint', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: SAPJ2EE::sap.com/xappscprxrpmui~collroomint
         at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:888)
         at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:511)
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [ExternalApplicationItem.prepare]: SAPJ2EE::sap.com/xappscprxrpmui~collroomint
         at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:188)
         at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:232)
         at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.start(SAPJ2EEApplicationItem.java:192)
         at com.sapportals.portal.prt.service.sapj2ee.Mediator.getAndStartExternalApplication(Mediator.java:132)
         at com.sap.portal.prt.sapj2ee.StartPortalApplication.coreRun(StartPortalApplication.java:59)
         at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:884)
         ... 49 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.netweaver.coll.appl.room
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
         at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:180)
         ... 54 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.netweaver.coll.appl.base
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
         ... 55 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.netweaver.kmc.people
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
         ... 56 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.km.application
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
         ... 57 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.km.cm.main
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
         ... 58 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.km.cm.repository.filter
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
         ... 59 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.km.cm.service.base
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
         ... 60 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.km.cm.protocols.ice
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
         ... 61 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.km.cm.protocols.webdav
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
         ... 62 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem._prepare]: com.sap.netweaver.bc.rf.service
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:427)
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
         ... 63 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception during start of application: SAPJ2EE::library:signature_lib
         at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:323)
         at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:387)
         ... 64 more
    Caused by: com.sapportals.portal.prt.core.broker.SAPJ2EELibraryNotFoundException: Could not find Library SAPJ2EE::library:signature_lib
         at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:277)
    I guess the KM applications are not being found. How do I correct this? Our KM repository is connected to BI and has got lot of BI content in it.
    Will redeploying the com.sap.km.applications.par file help?
    Please provide some solution so that this error will be resolved without effecting the KM Content.
    Thanks & Regards,
    Seema Rane

  • DPS DSCC doesn't show operational status

    I have DPS 6.3.1 running against 4 6.3.1 directory server instances. On the data sources page of DSCC, the 'operational status' column shows 'Could Not Retrieve Status' for all 4 instances. I've tried upping the log level on the DPS server to see if I could figure out what is causing this. Does anyone know how DPS (or DSCC) goes about figuring out what should be in that column?
    Thanks

    We don't have a single dscc for all instances. This is because of a strict 3 tier network architecture we are required to have (to the point that tier 1 dps is not allowed to talk directly to tier 3 ds so we have a tier 2 dps pass-thru). So are you saying that dscc in our tier 2 dps environment has to be able to talk to cacaoadm in tier 3 to show operational status of the ds on the dps screens? I was definitely under the impression that the monitoring as configured in dscc, has the dps instances monitoring the ds instances and the dps instances would let dscc know the status. To me, I don't care if dscc in tier 2 knows that the tier 3 ds instances are up, I want to know that the dps servers can talk to ds.

  • Request Status stays yellow after successful load

    We recently started loading two infocubes from the same data source. 
    - The Monitor shows that the load completed normally with no errors. 
    - Manage on the first cube shows that the status is green and the data available for reporting. 
    - Manage on the second cube shows the data is not avaialble and the status is yellow. 
    There seems to be no problems with the load. I can manualy force the status from yellow to green and the data is available for reporting.  But I don't want to have to manully change the status after each load.  Any ideas on why the status stays yellow?  Any thoughts on what I can do?
    Thanks,
    Chris

    Nagesh,
    Looks like your suggestion will solve this.  It was not checked for the one that was staying yellow.  It was checked for the cube that would go to green.  I'll run a test then come back and award points.
    Thanks,
    Chris

  • MAM Sync shows the Status O-Waiting

    Hello all,
    I'm trying to do the sync steps in my MI Client (using MAM), but when i try to do this, the SyncBOs in MEREP_MON are always showing the Status O-Waiting, and the data is not arriving to Client. I don't receive any error message in client.
    I've tried to run MEREP_RDB_T01_RESET in SE37 and replicate the SyncBOs in MEREP_PD and MEREP_EX_REPLIC. I've tried to reinstall MI Client and generate a new device ID. Nothing is happen.
    By the way, I've tried schedule of MI Jobs again and generate the roles for MI In PFCG. Nothing.
    I getting this problem after a System restart on the middleware. Before this, the system was working good.
    The system is: SAP Netweaver 2004s (WebAS 7.0) with Mobile Infrasctruture. MAM 2.5.  NW2004s is running in with Support Package 10 for Abap and Java stacks.
    Anybody have an Idea?
    Thanks a lot.
    Carlos

    Hi Carlos,
    First, check the whether you have enabled all the syncBOs in merep_pd. That is the culprit most number of times.
    Check if the data has come to the MEREP_207 table, which the RDB for the T01 syncBOs. If you have data in the table, then your replication is working fine.
    Kindly do the above two steps, and let me know abt their results. Also, tell me what is your MI client SP level.
    Regards,
    Rahul

  • Instance status BLOCKED

    system: ORACLE RAC 9i on Solaris 9. have 2 databases (4 instances).
    problem: can connect 3 instances but unable to connect 4th. following error.
    ORA-12521: TNS:listener could not resolve INSTANCE_NAME given in connect descriptor.
    when I check listener status its shows following.
    Service "BODB.world" has 2 instance(s).
    Instance "BODB1", status READY, has 2 handler(s) for this service...
    Instance "BODB2", status READY, has 1 handler(s) for this service...
    Service "DB.world" has 2 instance(s).
    Instance "DB1", status READY, has 2 handler(s) for this service...
    Instance "DB2", status BLOCKED, has 1 handler(s) for this service...
    how can I change instance status BLOCKED to READY?

    Hi,
    it very nice your solve your problem but one of possible reason when database configure in SHARED SERVER mode. or we received ORA-12520 error.
    Oracle Version : 10.1.0.2.0
    OS : Windows XP sp2
    Database configure in Shared Server Mode.
    SQL> show parameter dispatchers
    NAME TYPE VALUE
    dispatchers
    string
    (PROTOCOL=TCP)
    max_dispatchers integer
    SQL> show parameter shared_servers
    NAME TYPE VALUE
    max_shared_servers integer
    shared_servers integer 1
    ---------------------------------------------------------after change shared server = 0 then i got error "ora-12520".
    SQL> alter system set shared_servers = 0;
    System altered.
    SQL> conn scott/tiger@sh
    ERROR:ORA-12520: TNS:listener could not find available handler for requested type ofserver
    C:\>lsnrctl services
    Service "sh" has 1 instance(s).
    Instance "sh", status READY, has 2 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    "D000" established:3 refused:0 current:2 max:1002 state:blocked
    DISPATCHER
    (ADDRESS=(PROTOCOL=tcp)(HOST=alwarid-taj.fakhruddin.local)(PORT=3348))
    For above error you have to check configure two parameters.
    1.Shared_servers
    2.Dispatchers
    SQL> alter system set shared_servers = 1;
    System altered.
    SQL> alter system set dispatchers = "(PROTOCOL=TCP)" ;
    System altered.
    Service "sh" has 1 instance(s).
    Instance "sh", status READY, has 2 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    "D000" established:4 refused:0 current:2 max:1002 state:ready
    DISPATCHER
    (ADDRESS=(PROTOCOL=tcp)(HOST=alwarid-taj.fakhruddin.local)(PORT=3348))
    The command completed successfullyregards
    Taj
    Message was edited by:
    M. Taj

  • Srvctl instance status doubt

    Why srvctl utility showing "Instance is running" evenif it is in nomount,mount and open state?
    Is instance is running in nomount state?
    I have four node cluster and 4 instances are running on it. Frist instance started in nomount mode, second one started in mount mode and third instance started in open mode and fouth one is not running.
    srvctl utility showing instance is running event if it is in nomount,mount and open state
    SQL> !srvctl status database -d dtrac
    Instance dtrac1 is running on node slpal05 Instance dtrac2 is running on node slpal06 Instance dtrac3 is running on node slpal07 Instance dtrac4 is not running on node slpal08
    Herewith status from gv$instance
    SQL> select INSTANCE_NAME,STATUS from gv$instance;
    INSTANCE_NAME STATUS
    dtrac1 STARTED
    dtrac2 MOUNTED
    dtrac3 OPEN
    SQL>
    Patfrom: HP-UX
    Oracle version:11.1.0.7
    Edited by: [email protected] on Jun 14, 2009 11:51 PM

    As always including version and platform is key to getting answers.
    You choose not to share that bit. Probably because it is too much work.
    Yet, I recall on Wineblows, srvctl will report 'running' as soon as the associated Wineblows Oracle service is running, regardless of the state of the database.
    Sybrand Bakker
    Senior Oracle DBA
    Experts: those who did read documentation.
    PS I seem to have overlooked the version and platform bit, as it was not opening the post.
    The Wineblows comment stands.
    Edited by: sybrand_b on 15-jun-2009 0:51

  • Modification of Netweaver Administrator PAR/EAR  File

    Hello Gurus,
    I am using SAP Netweaver Administrator tool for System Administration,Monitoring etc..
    But in my case I need to develop a IView... which shows only System Availability.
    (In NWA this iview can be accessed by System Management->Administration->Systems-> the iView which shows the Availability of the Servers in the Landscape.)
    Can anyone explain me which PAR/EAR file that I need to modify to change the code of Netweaver Administrator according to my requirement.
    Any valuable points would be highly appreciated.
    Thank you in advance.
    Regards,
    Karthick Eswaran

    Hi Karthick,
    Sorry for "spamming" this thread.
    I am using Template Installer in NWA for BIPostInstallation.
    I read your previous posts and Blog on Integration of SAP BI 7.0 and SAP EP 7.0 so sending this message.
    After I faced errors in step 12 of template installer:
    Import ABAP Certificate to Engine
    Import not successful
    Element 'SAPConfigLib.BID.Unclassified.uploadAbapCertificate':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
    -:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
    -:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
    -:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
    -:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
    Element 'SAPConfigLib.BID.Unclassified.uploadAbapCertificate':Error during executing Java Reflection:Remote call errored.
    Followed SAP Notes 917950 and 925351. Also searched for other but to no avail. Currently all steps in template installer are successfull expect this one.
    Could you help please.
    regards, Sean.

Maybe you are looking for