NetWeaver AS Java 7.3 EHP1 not starting after a refresh

Hello,
I am refreshing our BW system, which has ABAP and Java with separate SIDs and separate DBs,
NetWeaver 7.3 EHP1, the DB is oracle 11. Java is using ABAPs UME.
The ABAP part went without any trouble. For Java, I have exported the source system, as I have
read in the system copy guide, that only offline backup is supported for system copy.
Though after importing the system with the latest SWPM, it is not starting, I have the following error
in log_bootstrap.0.log:
[Apr 26, 2014 9:37:18 PM ]
Error while persisting instance profile for component [Configuration Manager] of type [external]
com.sap.engine.frame.core.configuration.NameNotFoundException: Configuration [ID15603850] not found in [cluster_config/system/instances]
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.determineMissingConfiguration(ConfigurationHandlerImpl.java:1723)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.determineMissingConfiguration(ConfigurationHandlerImpl.java:1694)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:1055)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:1000)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.persistInstanceProfile(ConfigurationManagerBootstrapImpl.java:410)
at com.sap.engine.bootstrap.Bootstrap.persistInstanceProfile(Bootstrap.java:114)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:281)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)
[Apr 26, 2014 9:37:18 PM ] Instance profile persisted for [116] ms
[Apr 26, 2014 9:37:18 PM ] Starting to collect synchronization info [DETECT]
[Apr 26, 2014 9:37:18 PM ]  
Local version information read for [155] ms
[Apr 26, 2014 9:37:18 PM ] Exception occurred for component [internal/unkown] of type [unkown]
com.sap.engine.bootstrap.SynchronizationException: Configuration entry [native.descriptor] cannot be found in [bin/native]
at com.sap.engine.bootstrap.SynchronizationInfoImpl.loadNativeFilesIndexes(SynchronizationInfoImpl.java:924)
at com.sap.engine.bootstrap.SynchronizationInfoImpl.collectSynchronizationData(SynchronizationInfoImpl.java:154)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:301)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)
----------==[ Caused by: ]==----------
com.sap.engine.frame.core.configuration.NameNotFoundException: Configuration [bin] not found in [cluster_config/system/instances/current_instance]
at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(ConfigurationDataCacheAllImpl.java:102)
at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfiguration.java:916)
at com.sap.engine.core.configuration.impl.ReadAccessDerivedConfiguration.getSubConfiguration(ReadAccessDerivedConfiguration.java:150)
at com.sap.engine.core.configuration.impl.ReadAccessDerivedConfiguration.getSubConfiguration(ReadAccessDerivedConfiguration.java:141)
at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfiguration.java:885)
at com.sap.engine.bootstrap.StorageAccess.getConfigurationFromRoot(StorageAccess.java:550)
at com.sap.engine.bootstrap.StorageAccess.getStreamToFile(StorageAccess.java:593)
at com.sap.engine.bootstrap.SynchronizationInfoImpl.loadNativeFilesIndexes(SynchronizationInfoImpl.java:912)
at com.sap.engine.bootstrap.SynchronizationInfoImpl.collectSynchronizationData(SynchronizationInfoImpl.java:154)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:301)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Many thanks for your quick help - this is becoming a very hot topic for us now!!

Hi Reagan and thanks a lot for replying so quickly!!
I have provided the log, that contains the most precise information, though here are some other entries, my exit code is 515, not 508:
dev_bootstrap:
F [Thr 02] Sat Apr 26 21:59:44 2014
F  [Thr 02] *** LOG => State changed from 2 (Starting framework) to 3 (Running).
F  [Thr 02] *** LOG    state real time: 4.895 CPU time: 0.140 sys, 3.740 usr
F  [Thr 02] *** LOG    total real time: 10.662 CPU time: 0.640 sys, 5.860 usr
F  [Thr 02]
F  [Thr 02] *** LOG => State changed from 3 (Running) to 5 (Stopping).
F  [Thr 02] *** LOG    state real time: 0.223 CPU time: 0.010 sys, 0.380 usr
F  [Thr 02] *** LOG    total real time: 10.886 CPU time: 0.650 sys, 6.240 usr
F  [Thr 02]
F  [Thr 11] *** LOG => SfCJavaVm: exit hook is called. (rc = 515)
F
F  ********************************************************************************
F  *** ERROR => Java node 'Instance_bootstrap' terminated with exit code 515.
F  ***
F  *** Please see section 'Java program exit codes'
F  *** in SAP Note 1316652 for additional information and trouble shooting advice.
F  ********************************************************************************
F
F  [Thr 11] *** LOG => exiting (exitcode 515, retcode 1).
M  [Thr 11] CCMS: CCMS Monitoring Cleanup finished successfully.
jvm_bootstrap.out contains exactly the same error:
   Error while persisting instance profile for component [Configuration Manager] of type [external]
com.sap.engine.frame.core.configuration.NameNotFoundException: Configuration [ID15603850] not found in [cluster_confi
g/system/instances]
sapcpe_bootstrap.log:
ActualizeLocalFile: sap.com~tc~je~offlineconfiguration~impl.jar
ActualizeLocalFileOrDir: sap.com~tc~logging~java~impl.jar (FPM:0x0)
ActualizeLocalFile: sap.com~tc~logging~java~impl.jar
ActualizeLocalFileOrDir: sap.com~tc~sec~secstorefs~java~core.jar (FPM:0x0)
ActualizeLocalFile: sap.com~tc~sec~secstorefs~java~core.jar
Files scanned......:    49    8.43 MB
** All local files, which are available and defined, are up to date. **
Required Time......:  0:00
Copy Errors detected.................: 0
Sync Errors detected.................: 0
Not copied files (UID=0) detected....: 0
Warnings detected....................: 49
And basically, those are all the bootstrap log files, which are most recent...
I have been thinking to uninstall the complete instance and then try target system installation once again, after everything from the previous instance has been cleaned up... What do you think? Of course, no answer to my OSS message, as it is weekend... Thank you!!

Similar Messages

  • SLD will not start after I upgraded Netweaver 2004s Portal

    SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
    It gives me the following J2EE error:
    Application error occurred during request processing.
      Details:   java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
    Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

    Hi ,
    as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
    See the threads below for more information
    NetWeaver 2004s upgradation problems
    Could not run WebDynpro Tutorial - NoClassDefFoundError
    Points are welcome if it is useful
    Koti Reddy

  • Java Process server0 is not Starting (exitcode -11113)

    Hi,
    Need your help. My Java AS is not starting after I encounter error during JSPAM component upgrade error. I tried to deploy updates on SAP J2EE ENGINE 7.00 then I got exitcode = -11113
    Below is my tail logs i got from dev_server0 file. Appreciate your help.
    [Thr 9764] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 1028] Thu May 08 18:02:20 2014
    [Thr 1028] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 1028] Thu May 08 18:02:23 2014
    [Thr 1028] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 1028] Thu May 08 18:02:24 2014
    [Thr 1028] JLaunchISetClusterId: set cluster id 24050450
    [Thr 1028] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 1028] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 9712] Thu May 08 18:03:15 2014
    [Thr 9712] JLaunchIExitJava: exit hook is called (rc = -11113)
    [Thr 9712] **********************************************************************
    *** ERROR => The Java VM terminated with a non-zero exit code.
    *** Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    *** for additional information and trouble shooting.
    [Thr 9712] JLaunchCloseProgram: good bye (exitcode = -11113)
    Cheers!
    Henry

    Hello Henry,
    The exitcode -11113 is just a generic message to tell us that a core service has failed to start. In this case, it is the UME service due to the error java.lang.NoClassDefFoundError: com/sap/security/core/util/config/IUMConfiguration
    This is caused by an inconsistency inside NW Java stack. With any NoClassDefFound errors, We need you to patch some sca files as there is missing references or corrupted classes on the filesystem. As you say that this error occurred during an upgrade then I assume you are missing dependencies
    The affected sda files belong to UME:
    com.sap.security.core.offline.sda      (extract from SAPJEECOR**_*.SCA)
    com.sap.security.api.offline.sda       (extract from SAPJEECOR**_*.SCA)
    com.sap.security.core.ume.service.sda  (extract from SAPJEE**_*.SCA)
    What you need to do is to download the latest patches for the above components and apply them in your system with SUM/SDM. As there are certain dependencies with core Java components, Along with patching SAPJEECOR and SAPJEE, you should also patche SAPJTECHS and SAPJTECHF.
    Regards,
    David

  • PI7.11(PI7.1 EHP1) sapcpe.exe can not start after upgrade tokenerl  patch65

    Hi,
      When I upgrade PI7.11 kernel (On Operator system WIN2003 server x64 64BIT) from patch level 62 to patch level 65
      or higher level 67 or71   with JSPM,
      after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
      It's worked before patch level 62.
      Did anybody occur the same problem?
      Can you give me some advice?
      In my WIN2003 server x64, I have the follow DLL libraries:
      Microsoft redistributable runtime DLLs VS2005 SP1(X86)
      Microsoft redistributable runtime DLLs VS2005 SP1(X86_X64)
      Microsoft redistributable runtime DLLs VS2005(X86)
      Microsoft Visual C++ 2005 redistributable
      Microsoft Visual C++ 2005 redistributable(X64)
      Microsoft Visual C++ 2008 redistributable SP1(X64)
    Edited by: IBM China on Feb 4, 2010 12:56 PM

    >   after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
    Please check your event log and see if you use the current runtime. A new runtime library is necessary to fix an ATL security issue, see
    Note 1375494 - SAP system does not start after applying SAP kernel patch
    Markus

  • Workflow notification mailer not starting after APPS pwd change

    Workflow notification mailer not starting after APPS pwd change
    The error in the WFMAILER log is
    [appprod@nalinoes04 ABPROD_nalinoes04]$ cat WFMAILER1300061.txt
    wferr:
    - WFXXX_DB_CONNECT CODE=1017 CONNECT=APPS
    cpid=1300061, logfile=/abprod/comn/admin/log/ABPROD_nalinoes04/WFMAILER1300061.txtparams=, status=Running, debuglevel= Error Done.[appprod@nalinoes04
    Can you please advice ?
    EBS 11.5.10.2
    DB 11.2.0.1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    There is no upgrade, just a usual APPS password changeYou still need to bounce the application services.
    The error you have posted above does not tell much about the issue. Please clear the log file, reproduce the issue, and check the log file then.The FNDCPGSC log file
    [Oct 23, 2012 12:42:42 PM CDT]:1351014162195:Thread[BES Dispatch Thread,5,main]:0:-1:nalinoes05:172.25.80.54:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-1327162 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.76 2004/07/27 17:30:17 kkapur ship $ @16720915 {oracle.apps.fnd.profiles.ExtendedProfileStore@9980d5}],mUniqueId=SVC-GSM-WFMLRSVC-1327162,mLevel=4}, oracle.jdbc.driver.OracleConnection@76ab2f, 10006, DEACTIVATED_SYSTEM, This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=N, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:XXAB_OPEN_IBE_WF_MAIL, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_!08^@@690^6@6$$^#9^#6#!0$04868!@$^86$!!`}0$8|&%%+++|9|*@, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESSED, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, ACCOUNT=svc_oracle_mail, DISCARD=DISCARD, FROM=ACCO Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://nalinoes04.abd.ad.acco.com:8000/pls/ABPROD, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=lin-hera.na.acco.com, OUTBOUND_SSL_ENABLED=N, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL, MORE_INFO_ANSWERED=WFMAIL:MORE_INFO_ANSWERED, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=5, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=Y, OUTBOUND_SERVER=nalinoes04.abd.ad.acco.com, INBOUND_SSL_ENABLED=N})
    Please see these docs.
    How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
    Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
    Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
    Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
    Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
    How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
    Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
    Thanks,
    Hussein

  • Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.

    I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
    I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
    I do not use a firewall or virus program.
    My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
    What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
    It is either a Ubuntu problem or a Firefox problem.
    Sonny.

    ''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
    Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
    The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that).

  • Firefox will not start, after reboot.

    For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
    == This happened ==
    A few times a week
    == Around the time 3.5 was released

    Hello Tom.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • ITunes 10.1.2 not starting after update

    iTunes will not start after being updated to 10.1.2. Also experienced internet explorer being extremely slow. Tried to repair the installation, but same result. Uninstalled iTunes, restarted the computer, and internet explorer started working again. Reinstalled iTunes from Apple web page. Same result as after update. Everything worked fine before update, no errors during installation.

    I have just had exactly yhe same problem.
    Try this!
    Go to the itunes support page and uninstall / reinstall Itunes + quicktime exactly to the troubleshooting instructions.
    It takes some time and patience but it works on my Vista operating system. Windows 7 should also work as the instructions refer to both systems.

  • Windows 8.1 is not starting after installing Bluetooth driver

    I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
    It was perfect before installing RaLink Bluetooth Driver update.
    I use "HP ENVY 15 Touchsmart j001tx" laptop.
    Please have a look on this articles also:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
    Further information:
    HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
    Sushovan Mukherjee

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • Windows 8.1 desktop PC not starting after hibernation

    Hi,
    I have a PC that is not starting after hibernation. There are different errors appearing after my tries to repair the boot. I have tried to find a document online describing the boot process but I can't find any. I know how it worked in the old days with boot.ini
    and such but this new one is hard to figure out without a desciption.
    First I tried to use the automatic repair process but that didn't work. I have also tried bootrec, bootedit, and bcdboot.
    I then bought the Easy Recovery Essentials from NeoSmart Technologies but that didn't help to fix the issue, PC still boots to error 1. below. I tried the following process that they suggested:
    I have followed the instructions on this link http://j.mp/BcdRepair that they suggested but it didn't help. Instead of the two errors I have come across (PROCESS1_INITIALIZATION_FAILED and error code 0xc000000f on file \EFI\Microsoft\Boot\BCD via F8, both with
    white text on blue background), I got to a black page with grayish text telling me the following:
    Windows Boot Manager
    Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
    1. Insert your Windows installation disc [...]
    2. Choose your language [...]
    3. Click "Repair your computer."
    File: \Windows\system32\winload.exe
    Status: 0xc000000f
    Info: The application or operating system couldn't be loaded because a required file is missing or contains errors.
    It looks like one boot entry gets added to the boot menu every time the PC runs the automatic repair process. In the boot menu I now have more than ten occurrences of Windows Boot Manager.
    Errors:
    1. Your PC ran into a problem and needs to restart [...] you can search online later for this error: PROCESS1_INITIALIZATION_FAILED
    2. Manual boot to one of the Windows Boot Manager entries that appears via F8 gives me the error code 0xc000000f on file \EFI\Microsoft\Boot\BCD.
    I even tried to copy the BCD from an exactly identical PC but then the path to the BCD disappeared and I'm not sure what drive letter to enter in bcdedit because C: is not C: but X: when booted into Advanced resque mode.
    I could just reinstall Windows 8.1 but it feels frustrating, all the files are there. I just need to fix the boot.
    Sorry if this post is a bit of messed up, that's about how I feel right now... :)
    Does anyone have any suggestions and/or can point me in the direction of a nice document describing how the boot process works, where the BCD is located (I have several on the PC) I would be very happy.
    Many thanks in advance.

    Hi,
    According to your description, in my opinion, it seems like not bcd file problem. It's PC itself problem, maybe a hardware problem, also can be system componments corrupt.
    Can this PC startup successfully if you choose reboot or shutdown PC? Or this problem just occures after resume system from hibernate?
    For Windows boot process knowledge, you can refer to the contents of the link below for more details:
    http://social.technet.microsoft.com/wiki/contents/articles/11341.the-windows-7-boot-process-sbsl.aspx
    For your problem, in my opinion, it would be better to use System installation to fix this system file for test.
    Roger Lu
    TechNet Community Support

  • PC Suite 6.86.9.3 does not start after reboot

    Hi!
    I have some strange problems with the PC Suite. After the first install everything is working well but after a reboot the PC suite is not starting after double click on the desktop icon.
    But i can install tools on the phone or start some of the suite tools. Only the PC Suit does not run.
    The repair function of the installer does not bring any results. The only way ist to deinstall the suit and all drivers and to clear all remainig nokia registry entries. After that I can install the suite again and it will run again... until I reboot the system. And so on, and so on...
    Does any one have an idea how to solve my problem?
    Thanks
    Michael

    Actually it does not work on one Windows XP SP3 computer, but it does work on another Windows XP SP3 computer.
    Probably this is a .NET application, as I have encountered several .NET applications that do NOT work on some specific computers.

  • Oracle 10g not starting after upgarde

    Hi,
       Oracle not starting after upgrade and this service not starting automatically . This is error giving in the event viewer
    Description:
    The OracleDEV102iSQL*Plus service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.
    Cheers
    Murali

    Hi,
    I cannot explain what went wrong.
    The error indicate that the upgrade is not finished or an error happened during the upgrade.
    Please, review the alert log and the upgrade logs.
    There are some possibilities:                                                                               
    - First one is to finish the upgrade to Oracle 10.2 manually. Please,  check the Metalink notes:                                                                               
    Note 316889.1 - Complete checklist for manual upgrades to 10gR2   
        Note:420146.1 - What is the Best Way to Upgrade to 10g?                                                                               
    - Second option is to restore the database to a point before the  upgrade. In this case, you have to use the Oracle 9.2 software as  well and need to restart the upgrade from the beginning.

  • My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

    My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
    I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

    here is link to the apple product feedback website:
    http://www.apple.com/feedback/

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Maybe you are looking for

  • Small Office Design

    Please suggest me a network design , for my new office contaning 10 users to start with. I want redudency , like HSRP or fail over . A firewall or a ISR route and a L3 switch . Please provide me options.

  • Error while viewing the PDF

    Hi, Can I get any solution to the below issues. When I open the pdf and scroll down I got the error message Could not find the Extended Graphics Stage named 'GS1'.  After this all the pages are shown as blank. And I can not able to view any content o

  • Can't start iDVD...

    I've seen similar questions in the forum here for this problem, but nothing works so far... I can't get iDVD to work correctly. I start it up, select & name a new project (Standard 4x3), and it brings up the 2 pane window and then hangs. In the past,

  • Cant load the airport express with 802.11n

    today i just got my new airport express with draft n. but my router can't load the config anymore after i uploading my setting ( change to N with 5 GB ). i've tried all of methods that the manual included. I think i need to exchange the new one. i ju

  • WBAM Setup, cannot open /Helpdesk

    Hello, We are going through a "trail" period to decide to use MBAM or not but are having problems with getting the /helpdesk to work. This is the setup: SQL 2012 Enterprise /w SSRS (This is working) Windows Server 2012 R2 /w IIS 8.5 All on same serve