NetWeaver BW 7.0 SP 11 to EhP1 SP07

Hi,
I prepare a upgrade.
When I read the best practice to upgrade to EHP1 :
[http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/808c3535-e378-2c10-83b4-cff07abef8e3|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/808c3535-e378-2c10-83b4-cff07abef8e3]
We need to update with spam at least with Support Package-Stack 17/BI Patch 19.
But in [Note 1142832 - Installation Enhancement Package 1 for Netweaver 700: |https://service.sap.com/sap/support/notes/1142832]
Usage type BI only: Support Package Requirements
If you use usage type BI in your system and want to update it to enhancement package 1 for SAP NetWeaver 7.0, make sure that you fullfill one of the following requirements:
* Either at least SAP_BW Support Package 19 (included in Support Package Stack 17) is installed in your system before you start the SAP Enhancement Package Installer
* Or you include at least SAP_BW 7.01 SP07 (SAPKW70107) during the enhancement package installation.
So I am a little bit trouble.
Can I jump in one or in two steps ?
Best regards,
Philippe

Thank you for your reply.
Two step = 1 ---> Update to SP17
2 -
> EhP1 SPS07
One step = EhP1 SPS07
But, in the first document and with SPS07, you have to update in SP17 and after install EhP1 SPS07.
I gonna try in one step.
Best regards,
Philippe

Similar Messages

Anonymous user on 7.0 EHP1 SP07

Dear all,
I've started the development of an anonymous accessible Portal using NW 7.0 EHP1 SP03, so the all configurations was been done and it was working well, after update for SP07, the anonymous user can't show the contents, the note 837898 was fully applied.
Another strange behaviour, the navurl that is generated using External Connector : wpccontent:// isn't redendered but if i publish a page using Single Web Pages Integration using iView (http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ff/681a4138a147cbabc3c76bde4dcdbd/content.htm) it is rendered.
Does anybody using this scenario?
Best regards

Dear Isaias,
We are currently running NW 7.01 SP05 and are in the process of upgrading to SP07. We found that the upgrade to SP07 caused issues to anonymous access on the portal. We have since found SAP note 1504302 detailing the issue. The patch is not available via the Service Marketplace yet, but I have heard rumors of it being available by 17th September 2010.
In respect to your other query, I could not replicate the issue (assuming I have correctly understood the problem) but I suspect that if anonymous access is being used for this page via the external connector, these issues may be linked.
Best regards,
Chris

Portal EHP1 SP07 Patch causes app server jcontrol.exe to not start.....

I just finished patching our test portal system.
The database\message server which also has an app server on it starts up and runs just fine. The problem we are having is the second app server which is on a different windows host will not start (jcontrol.exe stays in a gray status).
Here is the developer trace errors for the second app server:
[Thr 5136] Wed Dec 08 06:56:19 2010
[Thr 5136] *** ERROR => invalid return code of process [bootstrap] (exitcode = 66) [jstartxx.c   1642]
[Thr 5136] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 66)
[Thr 5136] JControlCloseProgram: started (exitcode = 66)
[Thr 5136] JControlCloseProgram: good bye... (exitcode = 66)
Here is jvm_bootstrap.out log file located at \usr\sap\xxx\j00\work:
Bootstrap MODE:
<INSTANCE GLOBALS>
determined by parameter [ID0067689].
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:360)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
     at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.sql.log.OpenSQLException: Could not load class com.microsoft.sqlserver.jdbc.SQLServerDriver.
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:143)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:302)
     ... 14 more
Caused by: java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
     at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
     at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
     at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:303)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:141)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:134)
     ... 17 more
[Bootstrap module]> Problem occurred while performing synchronization.
Any ideas?
Thank you,
Neil

Neil,
Thanks for your persistence and for reporting how you eventually solved it. I had precisely the same problem after upgrading our production Portal from 7.00 to 7.01. I didn't have problems in dev or test, because we don't have multiple app servers in those environments, just a central instance. Now it's GoLive weekend and I've been pulling out my hair trying to get the app servers to work after the EHPI process is done. I had to do just what you suggested, about editing the bootstrap configuration manually, as changes in the config tool didn't seem to have any effect on jcontrol. I got that solved using your solution, but that led to nearly the same problem occurring for the individual dispatcher and server nodes, once jcontrol was started. It took a while and lot of experimenting, but eventually I figured out that they were pulling the wrong jdbc driver from their individual configuration.manager properties (accessed via config tool). The central instance was correctly updated by the EHPI program, but not the app servers. Annoying!
Makes me wonder if I was supposed to leave the app servers running during the 'downtime' phase of the EHPI. The manual, and the EHPI program, tell you at the start of the phase "shut down all dialog instances now", but then there's no indication of how these significant changes are supposed to be replicated to the app servers. Several times I nearly escalated to a Very High priority Customer Message, but I kept unraveling the thread until I solved it, and your message here was the clue that put me on the right track.
Thanks,
Matt

SAP EHP1 FOR NetWeaver Mobile 7.1

Hi,
We plan to install a server for NetWeaver Mobile but wonder to install SAP EHP1 FOR NetWeaver Mobile 7.1 or SAP FOR NetWeaver Mobile 7.1. Any enhancement for the ehp1 package and limitation? Thanks,

Hi,
as Siva already mentioned - just to add the screen - if you enter service.sap.com/swdc and drill down to download the EHP support package for mobile, you get the following warning right at the top:
Important Note:
SAP enhancement package 1 for SAP NetWeaver Mobile 7.1 contains changes mainly targeted for use by the mobile applications SAP Mobile Defense & Security 1.6 and SAP Mobile Direct Store Delivery 4.0. Therefore SAP recommends to install SAP enhancement package 1 for SAP NetWeaver Mobile 7.1 only if you want to use one of the corresponding applications SAP Mobile Defense & Security 1.6 or SAP Mobile Direct Store Delivery 4.0.
Due to that, you should go with usual MI7.1 stack.
Hope this helps.
Regards,
Oliver

Any known issues on upgrading SAP Netweaver from 7.0 EHP1 SP5 to SP6

Hi All,
Please let me know the implications after upgrading our portal from 7.0 SP19 to SP21 and also Netweaver ABAP stack from BW 7.0 EHP1 SP 5 to 7.0 EHP1 SP6.
Thanks & Regards,
Sowmya
Edited by: Sowmya B on Apr 15, 2010 2:27 PM
Edited by: Sowmya B on Apr 16, 2010 6:44 AM

Hi Experts,
We're in the process of upgrading SAP NW 7.0 EhP1 SP3 to SP10 using Enterprise Portal. I download the all the patches MOPZ via in Solution Manager System. NW 7.0 EhP1 SP10 Related patches successfully downloaded. But i didnt get
Enterprise Portal related patches for Example.
sap.com/CAF-KM.SCA
sap.com/EP-PSERV.SCA
sap.com/EP-WDC.SCA
sap.com/EPBC.SCA
sap.com/EPBC2.SCA
sap.com/KMC-BC.SCA
sap.com/KMC-CM.SCA
sap.com/KMC-COLL.SCA
sap.com/LM-PORTAL.SCA
sap.com/NET-PDK.SCA
sap.com/RTC.SCA
sap.com/RTC-STREAM.SCA
sap.com/SAP-EU.SCA
sap.com/SAP_BUILDT.SCA
I serached through SMP, But I am getting NW 7.00 releated patches, But our current running pathes NW 7.0 EhP1 SP03 upgrade plan for SP10. Please How to download the Those Patches. Thanks for All.
Thanks,
Selva

NetWeaver 7.01 ?

Any one knows what the exact means of NetWeaver 7.01 ?
if NetWeaver 7.01 = SAP NetWeaver 7.0 with Enhancement Package 1 (EHP1) ?
Thanks...

Hi,
This is right ....SAP NW 7.01 means SAP NW EHP1...
For more information, please see SAP note 1248905...
Thanks
Sunny

Portal runtime error while selecting page layout in WPC editor

Hello,
in web page composer, editing page, when i click on "select page layout" I have a portal runtime error popup.
The logfile shows the following :
#1.5 #005056834112005E0000000C00000FA800048E28A94966CC#1282205196819#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#1016#149##n/a##7ff9c93eab6811dfa9c70000003307de#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###10:06_19/08/10_0010_3344350
[EXCEPTION]
#1#com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in java compiling
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: E:
usr
sap
EPD
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.netweaver.bc.util
lib
bc.util.public_api.jar(com/sapportals/wcm/WcmException.java):24: class WcmException is public, should be declared in a file named WcmException.java
(source unavailable)
1 error
I have the same by clicking on "check assignments"
Any help ?
Thanks

Hello Jego.
We faced the same issue after upgrade to EHP1 SP07 last week and managed to solve it by modification of layout.jsp and com.sap.nw.wpc.layoutmanager.LayoutBean within com.sap.nw.wpc.designtime.par. SAP's code requires an additional catch handler, so it is better to rise an OSS message.
As a workaround you may change a default layout for wpc main page (good for new pages) or manually edit output.xml for existing pages.
Best regards,
Aliaksandr Zhukau

SAP-BW. 7.30 Differentiators and Upgrade

Hi All
We are in the process of consider upgrade of our present BI-7.0 (EhP1) to the latest BW 7.30 version,I was able to read a document released by SAP on BW7.3 in the month of April this year and also read all the blogs related to 7.3 , but I would like to understand the impact or benefits our company will get when we upgrade our BW system to latest version in detail So
I would like to know
1)BW 7.3 differentiators
a) What additional features are being added? ( I know a new function called Dataflow Generation wizard , and changes in the
      Infopackage for automatic Init loads , and semantic partions of DSO and Cubes are added, But would like to what are other
       features or changes which are added ?)
b)How BO integration works with BW 7.3?( As the document says , it will easy to integerate BOE , may you please detail me how
    and why the integeration is simplified , and how the integeration of Crystal report server or Xeclius tool will work , Is Cystal
   Report server or Xeclius provided as a default Add on to the new SAP Netweaver BW7,3 server, or will we have to maintain
them seperately on different machines/servers?)
c)What are the front-end tools for BW 7.3? ( are any new front end tools added, will our BEx Query designer or explorer are still
    supported with 7.3?)
2. Upgrade options/considerations
     a)How to upgrade to BW 7.3?( presently we are SAP netweaver 2004s 7.0 and recently installed EhP1 , so for BW7.3 we
         need to install EhP3 or do we need to change for present server
      b)Prerequisites to the Upgrade( Any hard ware limitation, or any server specifications or any mandatory things like BWA?)
      c)What are the minimum H/W and Front-end requirements?
3. Compatibility
    a)What are the ECC, CRM, SRM,.... versions that BW 7.3 will be compatible?
    b)How does the BEx reports will work on BW 7.3?
    c)Is WAD supported on BW 7.3?
    d)Will Admin Cockpit works on BW 7.3?
    e)Are BW security roles work on BW 7.3?
Thanks in Advance
Krishna
NOTE: I had already gone through the SAP PPT released in the month of April , But was not able to get answers to my above question , so request you not to point again to the same PPT .
Edited by: krishna dvs on Oct 20, 2010 8:48 AM

Hello All,
I am also doing a BW7.3 upgrade and wondering if you have a project plan I could leverage.
Sorry to impose like, however I am at a disadvantage since I never did a BW upgrade before.
Would you be able to assist?
Thanks so much.
Russ Smith (Chicago)....
C 847-910-8360

BPM and webdynpro for ABAP

Dear All,
I am new to BPM and wanted to understand that is there any linking in Web dynpro for abap and BPM or WD for JAVA can only be used in BPM. Also can somebody help me with the stztart document which tells about transaction and SAP netweaver step by step process for creating SAP BPM application. The BPM workflow, how it is connected to SAP at backend.
Thanks in Advance!
Regards
Naveen

Hi Naveen,
Netweaver BPM is shipped as part of Netweaver Composition Environment starting version 7.1 EHP1 and now CE 7.2 is also out. It wont be possible to run on ABAP stack. Also if you want to start learning then you may start with the following links:
/people/arafat.farooqui/blog/2009/08/05/part-i-an-introduction-to-sap-netweaver-bpm
http://www.sdn.sap.com/irj/sdn/bpmc
Hope this helps!!
Cheers,
Arafat

Can't publish service from soamanager

Hi all,
I want to publish a service from soamanager.
Found Calls
Status Timestamp Interface Name Location Is Prescheduled Communication Pattern Call ID
Error 2009-05-11 09:42:21 CO_ESREGISTRY_WSSI Consumer X Method:getVersionInfo 4A039102F16800B5E1008000C0A81213
Error 2009-05-11 09:47:15 CO_ESREGISTRY_WSSI Consumer X Method:getVersionInfo 4A03919EF16800B5E1008000C0A81213
Error 2009-05-11 09:53:18 CO_ESREGISTRY_WSSI Consumer X Method:getVersionInfo 499DCF8A910F0063E1008000C0A81213
Error 2009-05-11 09:53:18 CO_ESREGISTRY_WSSI Consumer X Method:getPhysicalSystem 499DCF8D910F0063E1008000C0A81213
Error 2009-05-11 09:53:18 CO_ESREGISTRY_WSSI Consumer X Method:publishPhysicalSystem 499DCF90910F0063E1008000C0A81213
Error Error CL_SOAP_RUNTIME_CLIENT EXEC_PROCESSING SOAP Runtime SOAP Fault Exception caught: : Cannot create implementation instance. Nested message: An exception occurred while obtaining UDDI Logical Ports. Please, check your configuration settings (UDDI Endpoint or UDDI wsdl file)[_DestinationServiceImpl7000] Application or service service:tcesiesp~srv tried to access destination UDDI_DESTINATION of type WSDestinationTemplate which does not currently exist in the destination service. You can create destinations in the NWA under Configuration Management->Infrastructure->Destinations..
What do I have to configure that it is working?
Please don't refer to documentation about the transaction WSPUBLISH!!!!
regards

Hi Poonam,
I followed your steps and I am not able to publish it. Ok, let me give my landscape.
I am using Netweaver CE 7.1 Trial Version and EHP1 for SAP Netweaver 7.0 Trial Version.
I created a simple calculator example in Enterprise Service Builder where in it takes 2 inputs and will give 1 output (simple addition).
I did save and activate the objects in ESB.
Now in SE80, I did see this Service Interface and created a proxy object and activated. I noticed that the "State" of the service is "Not released". How would we release this??
In SOAMANAGER transaction, I did create the endpoints. Also, I did notice that under Classification, the lifecycle status is "Not Released".
I cannot find this service in the "Service Registry" page.
I followed your steps as mentioned.
Q) Confirm that your Service Registry is configured properly?
In TXN SOAMANAGER, I went to Technical Configuration->Publication Administration->Services Registry. In here there is a entry:
Registry = SR_UDDI
Proxy Class = LP_WORKPLACE
Logical Port = CE1LOGICALPORT
Primary = X
Q) Do you have SR_UDDI_REG authorization object ?
There is a role called SAP_BC_WEBSERVICE_ADMIN which contains it . Assign this role to the user.
and check.
Yes, the role has been assigned to my userid in SU01 transaction
Q) Also Follow the below steps if not followed.:
Configuring your WS via SOAMANAGER or WSCONFIG/ WSADMIN is not all. After you do the config, you need to publish it.
In order to publish:
Go to Txn SM59 and create two TYPE G destinations for:
1. UDDI INQUIRY and
2.UDDI Publish
I did create 2 destinations with type "G" in SM59
RFC Destination = UDDI INQUIRY & UDDI PUBLISH
Target Host = localhost
Service No = 50000
path prefix = /sr/uddi
Q) Make sure you have OLD_UDDI attached to your user profile.
Then go to txn: SUDDIREG to register your destinations.
How do I check OLD_UDDI Profile ???
The Txn SUDDIREG doesn't contain anything. It's blank.
Open your WS in SE80 and go to variants tab.
on the UDDI node right click and publish to the UDDI registry you menytioned in SUDDIREG.
I did select my "Service Interface" in SE80 but couldn't find variants tab.
Your help is much appreciated.
Thanks,
Sathya

EHP4 upgrade on ECC 6.0

Hi Experts,
we are planning to install EHP4 on our ECC 6.0.
We have other systems like
SAP ECC 6.0
SAP NETWEAVER 7.0
SAP SCM 7.0
SAP SRM 4.0
As i have read that EHP4 upgrade requires SAP NETVEAWER 7.0 EHP1 upgrade. Does it means that if SAP ECC 6.0 is upgraded with EHP4 that SAP NETWEAVER 7.0 system should also have EHP1 ?
Thanks in advance.
regards
Vishal

HI
Both possibilities are within reach.
You can upgrade ECC 6.0 EHP4 on Sap Netweaver 7.01 or on Sap Netweaver 7.00.
When you calcule queue in mopz (SOLUTION MANAGER) you can select your upgrade, both options are available.
I recommend you do the upgrade on Sap Netweaver 7.01.
more info:
http://service.sap.com/instguides
Regards
William Neira

Create .SCA file for MII project

Please let me know the steps in creating .SCA file for deploying MII projects developed using WorkBench with login page. I think that after creating the .SCA file we can deploy it using Eclipse under the menu Deploy View Console or using JSPM. After deploying we should be able to login using the credentials and should be redirected based on roles to appropriate pages.
I had deployed the intial .SCA file named (XMII08_0-20004625.SCA) using JSPM. MII version used is 12.1.8 and Netweaver version is NW CE 7.1 EHP1 SP5.
How we can set up the development environment in Eclipse or NetWeaver Developer Studio for MII project development so that we can directly create MII SCA file from the tool itself. Please share documents if any.

I need to modify the default login page in MII and redirect it to different URLs based on roles.
I am able to change the images in the default Menu.jsp in the NetWeaver login to Authentication page and inside properties tab. There I am able to change the images like branding-image.jpg, SAP NetWeaver image, SAP Image. But this is reflected in both the URLs
http://servername:50000/nwa and http://servername:50000/XMII/Menu.jsp
Then I changed the web.xml inside war file (tcsecumelogonui.war) which is in the path InstanceDirectory:\usr\sap\CE1\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources with the new Login.jsp file instead of Menu.jsp for the servlet tags but still when I access the new Login.jsp page from the URL http://servername:50000/XMII/Login.jsp it is still showing Menu.jsp. But when I tried to login using the Menu.jsp page then it is redirected to my new Login.jsp page.
Please let me know how I will be able to change and deploy a new login page in MII 12.1.8 and with NetWeaver CE 7.1 EHP1 SP5.

PI 7.31 Single Stack

Hi All,
Do we have a document or link which points to all the settings that are needed to be done in PI when using RFC,Proxies,IDOC and other adapters from dual stack to single stack. Basically the settings needed for these adapters when communicating in single stack environment. Also pre-requisities needed to do a system readiness check before starting development.

Hi Amit,
The below blogs and document would be useful
Generate a Migration Report from PI Dual-Stack to AEX
Moving Integration Directory Artifacts from dual stack to single stack
SAP tool to migrate dual stack ID objects to Integrated Configuration Objects (ICO) - PI 7.3 EHP1, SP07
Migration Guide to AEX of PI 7.3x for Integration Scenarios
regards,
Harish

Web Intelligence Hangs When a Report is Cancelled

Web Intelligence hangs when a report is cancelled. Has anyone else had this problem and how have you fixed it? I have googled it and can find fixes for it on previous versions but can't find it on our current version. We are on SAP BusinessObjects BI Platform 4.1 Support Pack 2 Version: 14.1.2.1121.

Hi,
I still recommend Patch2.x , also the BICS correction is must-have in long term.
You need to save the BEx query in Designer with property "Allow external acess to Query"
Viewer preferences are set in BILaunchPad settings , not CMC
Java version can have impact - but anything in 1.6.0_x range is fine with IE 7 / 8
You also need to make sure your APS server (that contains the DSLBridge service) is running.
You also need to make sure that your user credentials in the BICS logon string have sufficient SAP Authorizations added to your Role, to be able to read the InfoArea nodes as seen in RSA1 in BW.
You also need to have a compatible BW version: 7.01 (EhP1) SP07 and above. (08 / 09 recommended)
Regards,
H

Restricting Multiple Logons to EP

Dear Experts,
We are in Enterprise Portal 7.0 EhP1 SP07
We have a Business Requirement where in we need to restrict the users from multiple logons.
For example, if I have logged into the portal with User ID u201CUser Au201D from an IE-6 browser window,
then the same u201CUser Au201D should not be allowed to login from any other browser window. (Here, any other browser literally means that once the session is active in one browser, then no other browser window, let it be from the same machine or other machine or any Web Browser other than IE-6 should not be allowed.)
Is this possible? Can this be achieved with a Custom Login module for restricting the sessions?
Kindly help.
Regards,
Sheryas Pandya

Hi Shreyas,
There is no easy way to restrict multiple logins. But this can be done through code changes in the header jsp files. Check these links:
Prevent multiple logins of the same user in portal
How to restrict multiple login session
Thanks and Regards,
Shyam.

NetWeaver BW 7.0 SP 11 to EhP1 SP07

Similar Messages

Maybe you are looking for