Netweaver concept & How BI related to NW
Hi ,
Can any body give me a brief description abt Netweaver and how BI interlinked with NW concept?
Advanced Thanks
Ravi
Hi Ravi Kumar ,
BI is one of the Netweaver component which has java stack.
The following websites contain PDF & PPT documents on NETWEAVER:
SAP NetWeaver® Overview
http://www.saparabia.com/sapworldtour06/presentationsfiles/06%2012.30-13.00%20SAP%20NetWeaver%20-%20Hichem%20Maya.ppt#1148,2,SAP NetWeaver® Overview
SAP NetWeaver® SOLUTION OVERVIEW
http://www.sap.com/platform/netweaver/pdf/BWP_OV_SAP_NetWeaver.pdf
SAP NetWeaver
https://www.sdn.sap.com/irj/sdn/pbnw?rid=/webcontent/uuid/bf74d491-0701-0010-edb8-9b77746f931f
SAP Netweaver : The need for practical solutions on the road towards the statergic goals
http://searchsap.techtarget.com/searchSAP/downloads/Tactical_solutions_towards_strategic_goals_overview.pdf
Systems management in SAP® NetWeaver environments
http://www.realtech.com/wInternational/pdf/software/themen_whitepaper/whitepaper_netweaver_e.pdf
BUSINESS PROCESS MANAGEMENT WITH SAP NetWeaver
http://www.sap.com/platform/netweaver/pdf/BWP_NetWeaver_BPM.pdf
SAP Provisioning with SPML 1.0
http://www.oasis-open.org/committees/download.php/15901/SPMLProvisioningWithSAP.pdf
SAP NetWeaver: Overview of SAP NetWeaver AS Java Administration
http://www.sap.com/community/pub/showdetail.epx?itemID=5548
http://www.erpgenie.com/sap/netweaver/
The following websites contain PDF & PPT documents on NETWEAVER
Business Intelligence : Getting Started with Business Intelligence ,Reporting, Analysis, and Planning , Data Warehousing, BI Accelerator Embedded and Process-Centric BI
https://www.sdn.sap.com/irj/sdn/nw-bi
The Home of SAP Business Warehouse (BW)
http://www.erpgenie.com/sap/sapfunc/bw.htm
SAP Business Information Warehouse
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/content.htm
Business Intelligence : Programming in BW
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/programminginBW&
BW and Portals 2005
https://www.sdn.sap.com/irj/sdn/bi-and-portals2005
SAP Business Warehouse (BW) Overview
http://gleez.com/sap/bw/overview
Business Intelligence : Steps to get started with SAP BW
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/stepstogetstartedwithSAPBW&
SAP Business Information Warehouse Scenarios
http://help.sap.com/bp_biv335/BI_EN/html/Bw.htm
SAP BW Learning Guide
http://searchsap.techtarget.com/general/0,295582,sid21_gci1077480,00.html
SAP BW Business Warehouse - Introduction
http://www.thespot4sap.com/Articles/SAP_BW_Introduction.asp
Business Content Frontend Design Guidelines (NW04)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bda556e9-0c01-0010-83b0-d519d6deb9e9
How To
Create and Maintain UI Patterns of BI Content
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ad214fe9-0c01-0010-4291-a629e5ba5f90
SAP NetWeaver BI Integrated Planning for Finance
http://www.sap-press.de/katalog/buecher/htmlleseproben/gp/htmlprobID-113
Info object,infocube,infosource,datasource,commn structure,extract structure ..etc..
http://www.erpgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%201.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01b9395c-0e01-0010-6786-c4ee5e5d2154
BI Performance Tuning
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
SAP Business Intelligence Accelerator : A High - Performance Analytic Engine for SAP Ne tWeaver Business Intelligence
http://www.sap.com/platform/netweaver/pdf/BWP_AR_IDC_BI_Accelerator.pdf
BI Performance Audit
http://www.xtivia.com/downloads/Xtivia_BIT_Performance%20Audit.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
Enhancements in SAP BW
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
Customer Enhancements in SAP NetWeaver BI (Exits, BAdIs and ABAP in the SAP NetWeaver BI Back End)
http://www.sap.com/community/pub/showdetail.epx?itemID=5257
BW 3.x and 3.5 "How To" Guides List
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/ee14e25d-0501-0010-11ad-8eb2861a7ec0
cheers!
gyanaraj
****Pls reward points if u find this helpful
Similar Messages
-
What is SAP NetWeaver ? How is that related to J2EE Technologies?
Hi!
Can anyone plz explain what exactly is SAP NetWeaver and how this is related to J2EE. explain with example if possible.Hi Madan,
SAP NetWeaver integrates various different technological concepts and previous platforms in a single solution.
Main components of this are ,
http://help.sap.com/saphelp_nw04s/helpdata/en/ee/275c42b4e05542e10000000a1550b0/content.htm
1) People Integration
2) Information Integration
3) Process Integration and
4) Application Platform.
People Integration
refer this link for more help for Portal
http://help.sap.com/saphelp_nw04s/helpdata/en/42/bfa145731b1d64e10000000a1553f6/content.htm
refer for Mobile application Help
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/555a421b5ec153e10000000a1550b0/content.htm
Information Integration
http://help.sap.com/saphelp_nw04s/helpdata/en/31/555a421b5ec153e10000000a1550b0/content.htm
Process Integration
http://help.sap.com/saphelp_nw04s/helpdata/en/5f/555a421b5ec153e10000000a1550b0/content.htm
Application Platform
http://help.sap.com/saphelp_nw04s/helpdata/en/97/68d64260752a78e10000000a155106/content.htm
Madan , u have to patiently go through these helps..
Frankly speaking , if u are a beginner ,it will take some time .. thats common for all.. never mind...
Madan ,
Most of the components in NetWeaver Technology is using Java Runtime .
As J2EE technology is a open technology , and its is too easy for J2EE applications to access through Web.
So if u have a java background , it will more easy to understand the concepts and application developments in NetWeaver platform..
All components in NetWeaver technology have its own use .Not so easy to become an expert in all. My opinion is ,if u have Java and ABAP experience , then start from Application Platform and Enterprise Portal First...
On the way u will get why i suggetst like this....
Let me know u have doubts..may be i can help u..
Regards
Kishor Gopinathan -
How to relate IDOC generated in sap through ALE from legacy system
Hi all,
can any one tell me how can relate an idoc generated in SAP with the new idoc generated in a legacy system. I mean how could I identify, which idoc is generated for a particular idoc in legacy system and vice versa.
Thanks,
NilanjanaThanks Suhas but when i am getting error message related to partnr profile when pressing this 'TRACE IDOC' button even with idoc in status 53.
Edited by: nilanjana sinha on Nov 11, 2011 8:20 AM -
How to relate dispute case for a AR document
Hi Gurus,
I have a requirement to change the reason code change date of dispute case(DIspute management) for the related AR document.
Basically i am posting a AR document through BAPI. Now i wanted to take the last dunned date(MADAT) and find the related dispute case after that change the reason code change date using last dunned date.
so my question how to relate relevent dispute case for the AR document?
Thanks advance.
Regards,
Radhakrishna.Hi.............
Better and simplest way you can get it through a simple qury report. Create a query by joining two tables ODLN and OINV. OINV's docdate means the closing date of delivery challan.
Regards, -
When im trying to download a free App an error appears and sais that my previously purchase was declined.how is related a free app with a paying one?
Because that's the way you setup your account. Whether the app is free or not is irelevent, apparently the payment method you selected when originally setting up your account is no longer valid, hence your account is not longer valid. Either fix your selected payment method or setup a new app store account without a credit card:
http://support.apple.com/kb/ht2534 -
How to relate a report page to a tabular form?
I have a table called PRODUCT
SQL> desc product
Name Null? Type
PRODUCTNUMBER NOT NULL VARCHAR2(15 CHAR)
PRODUCTDESCRIPTION VARCHAR2(30 CHAR)
LOCATION VARCHAR2(10 CHAR)
WARRANTY NUMBER(4)
PRODUCTSN NOT NULL VARCHAR2(25 CHAR)
STATUS VARCHAR2(20 CHAR)Now I create a view, and based on this view I create a report page
CREATE OR REPLACE VIEW V_PRODUCT_OVERVIEW AS
SELECT PRODUCTNUMBER, PRODUCTDESCRIPTION, LOCATION, WARRANTY, COUNT(PRODUCTSN) QUANTITY
FROM PRODUCT
GROUP BY PRODUCTNUMBER, PRODUCTDESCRIPTION, LOCATION, WARRANTY;For each type of product (identified by PRODUCTNUMBER), there may be many instances (identified by PRODUCTSN). I want to put an edit button beside each record on the report page. After clicking the edit button, it will redirect to a detail page, which is based on the specific PRODUCTNUMBER, where I can add or modify products.
SELECT PRODUCTSN, PRODUCTSTATUS
FROM PRODUCT
WHERE PRODUCTNUMBER = #THE_PRODUCTNUMBER_OF_LAST_PAGE#I don't know how to accomplish this, especially how to relate these two pages, and how to pass the PRODUCTNUMBER from the first page to the second. Any idea is appreciated! Thanks!Can't run sample appliation. When I run the appliation, login using "demo/#lower_case_workspace_name#", the browser comes with error message:
ORA-06550: line 2, column 8: PLS-00201: identifier 'CUSTOM_AUTH' must be declared ORA-06550: line 2, column 1: PL/SQL: Statement ignored
Error ERR-10460 Unable to run authentication credential check function. -
How to relate STEPUID/DMUID in RSDDSTAT_DM to STATUID in RSDDSTATTREXSERV
I am trying to troubleshoot slow performance of a query in BIA.
It spends more than 250 secs on DB (BIA). How to relate STEPUID/DMUID in RSDDSTAT_DM to STATUID in RSDDSTATTREXSERV. I can get StepUid and DMUID from the query statistics.
I know that I can get DataManager UID by executing the query in rsrt and then go to RSDDSTATTREXSERV. But I want to see the BIA statistics for query executions by the end users.
Is DMUID in RSDDSTAT_DM same as STATUID in RSDDSTATTREXSERV?
I assume that all the queries that hit BIA have an entry in RSDDSTATTREXSERV.Marc,
We have changed the huge dimension to line item dimension. Also changed the reorg multiplier to 0.25 so now every blade has one part and total there are 15 parts. But the query performance is still VERY poor. Query spends 30+ seconds in BIA even when this is the only query running in the system.
You can imagine that when this (and similar) queries are run under some load, the runitmes go as high as 250 secs. this is effecting performance of other cubes as well. Also, with BIA mimimum runtime of any query on this cube is 30 sec. With aggregates, some queries return in less than 10secs.
Our BIA is sized as per SAP recommendations. Size of the indexes does not exceed 50 % of the total available phyical memory.
Any inputs welcome.
Thanks,
Saurabh Bansal
Update: We applied the note you suggested. No huge gains.
Also, we have now upgraded to Rev 49. Runtimes are still over 25 secs (DB time) for all the queries on this cube which is obviously unacceptable.
Edited by: Saurabh Bansal on Jan 9, 2009 10:09 PM -
How to relate data of tables returned by FM for reading data from ST03N
Hello,
I am using the FM SWNC_COLLECTOR_GET_AGGREGATES to retrieve data displayed in T-Code ST03N into my report.
I am able to get the required data in different tables like Times, Memory, Usertcode, Userworkload, Hitlist_database.
However I am unable to undertand how to relate the data of these different tables, prepare another internal table with only the fields that are required for my report and then display those details.
Like, I want to loop through one of these internal tables, read data from other internal tables and consolidate my required data. But I am unable to understand based on what criteria I can read other internal tables inside a loop of any one of the above said internal tables.
I searched a lot and found many threads and blogs related to ST03N and learnt a lot about this T-code. But I could not find how to relate the data of all these tables.
Request you to please help.
Thanks and Best Regards,
EswarHi,
I see the common fields like TaskType, EntryId. But, I want to make sure that these are the fields that are enough to read the records or is there any other way that I can be sure that I am getting the correct record in my read statement. So my question is specific to the tables returned from the FM SWNC_COLLECTOR_GET_AGGREGATES and not a generic one.
Thank you for your help.
Best Regards,
Eswar.
Edited by: eswar praveen on Aug 20, 2010 12:19 PM -
Hello,
I'm learning SAP B1 and i'm trying to understand segmented account code information.
I understand that a segmented account code looks like: 12100000-01-001-01
where
12100000 is the natural account
01 is a division
001 is a region
and the last 01 is a department.
I assume that the account code above is the concatenation of OACT.Segment_* fields separated with dashes (-).
Is there a relationship between OACT.Segment_* and OASC (account Segmentation categories) or OASG (Account Segmentation)?
How can I tell that 01 is a division code and it's not a department code?
It's seems like the key field for OASC is the combination of SegmentId (OASG) and Code. If OACT.Segment_* are mapped to OASG.Code then where can I get SegmentId which is the other key for OASC?
Thank you very much,
JulesHello Gordon,
Thanks for responding and also for showing me FORMATCODE field.
I'm sorry I'm not sure if I understand what you mean by: "Segment accounts are starting with _SYS by unique id".
What would a FORMATCODE for a segmented account code like 12100000-01-0001-01 look like? Please show an example using _SYS and a unique id that you mentioned.
I'm sorry my sample database does not have any segment data. I'm trying to understand how to relate segment informtation, but I do not know how I can go from, possibly, FORMATCODE to OASC or OASG.
Thanks for your help.
Jules -
How a relational table stores data
Hi,
Can anyone please tell me how a relational table stores data internally? I mean what happens internally when we insert a new row into table? Please give me link of PDFs that I needed to go through. What I want is to be able to write a code for Relational objects such as table. What kind of preparation is needed for this?
Please give your answer in detail. You may send me direct email at [email protected]
Quick answers are highly appreciated.
Thanks in advance !!!
Edited by: DataExpert on 01-Sep-2009 10:55Hi,
Can anyone please tell me how a relational table stores data internally? I mean what happens internally when we insert a new row into table? Please give me link of PDFs that I needed to go through. What I want is to be able to write a code for Relational objects such as table. What kind of preparation is needed for this?
Please give your answer in detail. You may send me direct email at [email protected]
Quick answers are highly appreciated.You question is not clear what you want to know exactly.
With respect to relations tables you can get the information on google it self
http://livedocs.adobe.com/coldfusion/6.1/htmldocs/db_basi4.htm
http://en.wikipedia.org/wiki/Relational_database
I mean what happens internally when we insert a new row into table? Please give me link of PDFs that I needed to go throughRefer to : http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/memory.htm
the above links gives the idea of oracle memory architecture, then if we say some thing how it process then you can understand.
What I want is to be able to write a code for Relational objects such as table. What kind of preparation is needed for this? You need to know the SQL and PL/SQL , which enables you to handle the things.
Please give your answer in detail. You may send me direct email at [email protected]
Quick answers are highly appreciated.we are not hear to send email or to do the development things. We are spending some of our vauable time to help out and to learn some thing from forums. Sharing views and knowledge across. You must understand and we will be high appreciate that, f you do so.
HTH
sb92075 ,
- Pavan KumarN -
How MVC related to ABAP Web Dynpro?
Hi
I am a java guy....Can you please explain me how MVC related to ABAP Web Dynpro. In java we have views, controllers and model..but in web dynpro abap i didnt find any model and they are writting all the businness logic in view only. They are not using any component controller as well.
Can any one please explain me this...
Thanks & Regards
Ravi shankar BHi
Webdynpro is not a complete MVC pattern stuff , but it has also a controller and views.Views are to be completely out of the business logic but webdynpro allows us to put business logic inside the views.
Controller and Windows acts as the Controller in the MVC pattern
Thanks
Anzy -
SAP PP-What is BAPI & how it relates with PP-module
What is BAPI & how it relates with PP-module
hi
SAP has introduced object-oriented technology by making SAP processes and data available in the form of SAP business objects.
External applications can access SAP business objects through standardized, platform-independent interfaces - die Business Application Programming Interfaces (BAPIs). The SAP Business Objects and their BAPIs provide an open, object-oriented view of the business processes and data in an SAP System.
This guide provides an overview of the SAP business objects, SAP interface types, and their BAPIs as well as the Business Object Repository where business objects and BAPIs are defined and stored.
go with this link
http://help.sap.com/saphelp_47x200/helpdata/en/7e/5e114a4a1611d1894c0000e829fbbd/frameset.htm
-ashok -
How to relate MATNR (material number) with its internal Characteristics?
Material and its internal characteristics should be extracted from R/3 to BW?
The Internal Characteristics are available in following tables
CABN (Characteristic)
CAWN (Characteristic Value)
CAWNT (CHaracteristic Value Texts)
How to relate MATNR with the internal characteristics data from the above tables and extract it to BW?Hi,
Check the following link:
Getting material characteristics -
friends,
i have a report which calculates ECS, EXSED, exbed, CESS, etc...the data is taken from tables J_1IPART2, J_1IEXCHDR, J_1IEXCDTL..now, i need to retrieve the values from finance tables for these values alone..how to go about this? i believe the same values for all the abovementioned fields will be stored in finance tables...how to link these excise tables with bseg, bkpf or other tables and what should be the conditions? pl help...thanks allhi
can anyone help me in sorting out the issue as to how to relate these excise tables with finance tables? i want to get the values of the cess fields from those tables..not able to get an idea as to how to give the conditions..any help would be highly appreciated..thanks -
How the relation is maintained between BOm and dependencies
Hi Gurus,
Please tell me how the relation is maintained between BOm and dependenciesFirst you need to create object dependencies (CU01). Then these dependencies are to be assigned to BOM items in bill of material create / change mode(CS01/CS02). For this you need to select a component / BOM item and click 'Allocations' button.(Select BOM item + cntr F1)
Pls reward points if found suitable.
Thank you.
Umesh
Maybe you are looking for
-
Recovery and Tools partition problem
Hi; My Elitebook 8460p recover and tool partition deleted I want to recover my hard drive factory default but i can't find any rescue DVD. Please help me..
-
Problem reading ' from XML uisng SAX Parser
Hi All, I have a XML which contains the following element <DataText>This is simple ' Text</DataText>I have included & apos ; in the element called DataText. When parsing the element, am getting only the text that appears before & apos ; When Not incl
-
My iPad mini displays iOS 6 and won't bring up the main menu. How do you get it to access the main menu?
-
Can we recover lost work?
A colleague and I have been working on a large project, 100 GB worth.We started on my MBP and saved it to an external Lacie HD.Then she carried on using her MB. After trimming it down and cropping out the unwanted stuff we added transitions and theme
-
Keynote: change numbers in chart to french??
Does anyone know how to change the numbers in a chart to french? So decimals points become commas? If i input commas into the Chart Data Editor it does not ready them.