Netweaver Developer Studio required Libraries

Hi
I have just finished installing 7.2 Composite Environment.
When I try to run my first web dynpro app, the IDE asks me to configure the build path.
This is what I have in my library:
[http://www.kodakgallery.com/imaging-site/services/doc/5761:719057843409/jpeg/BG/async]
Can you please tell me what folders/jars I have to add in order to make the web dynpro perspective workable?
Thank you
Yuval
Edited by: Y PEERY on Nov 26, 2011 8:14 AM

how you install you nwds?did you connect to service market to install?

Similar Messages

Is SAP NetWeaver Developer Studio 2004s Supported on SUSE Linux

Hi,
Is SAP NetWeaver Developer Studio 2004s supported on Linux? It appears you can get a trail version of SAP NetWeaver Developer Workplace 2004s for Linux but there are no installation guides (SAP NetWeaver Developer Workplace nor SAP NetWeaver Developer Studio) to be found anywhere.
Thanks,
Luke

Hi Sajesh,
The SAP NetWeaver Developer Studio Installation Guide does not say Linux is supported (see below).
Luke
1 Overview
Purpose
This document describes how to install the SAP NetWeaver Developer Studio as a standalone version. To install as part of the SAP NetWeaver Developer Workplace, see the installation guide Developer Workplace for SAP NetWeaver 2004s.
You can see the SAP NetWeaver installation guides at service.sap.com/instguides.
Platforms
You can install the SAP NetWeaver Developer Studio on:
Windows 2000
Windows XP
Web Browser
You require Internet Explorer 5.5, or higher.
Minimum Hardware Requirements
The SAP NetWeaver Developer Studio requires approximately 500MB disk space, 512MB RAM, and an 800MHz processor.

How to download project template into the SAP NetWeaver Developer Studio

Hi,
I want to download project template into the SAP NetWeaver Developer Studio related to invoice detail get detail,get list etc.
How to do so?Actualy my requirement is to create an iView whcih contain the detail about the invoice.
Thank,
Kundan

Hi
If you have zip file of the project then unzip it into your project location where all projects are there .then in NWDS go to file->import->multiple existing project into workspace->browse the file where you have saved it and select the comp folder inside the project folder->click finish.Now you are able to see the webdynpro project in the webdynpro explorer.If its not appearing then go to Navigatore and right click on project and click on open project, it will open the project in webDynpro explorer.
Thanks
Susmita

Creation of custom page without using NetWeaver Developer Studio

Hi Experts,
In my project, we have not installed NetWeaver Developer Studio. We are using EP 7.0.
We have to create a custom page for the project. In this page, we have to provide seperate iViews links.
The page should look like this:
iView 1 - Link                iView 2 - Link        iView 1 - Link
Help iView 1-Link        Help iView 1-Link     Help iView1-Link
I tried to do so by creating a page. In the page, I tried to use 'Three Coloumn Page' layout. The iviews are getting displayed in following way:
iView 1 (iView is getting displayed .Link not getting displayed)
Help iView 1 (iView is getting displayed .Link not getting displayed)
iView 2(iView is getting displayed .Link not getting displayed)
I can not display link of all six iViews. Further more iViews are getting displayed in one coloumn and 3 rows. I can see the iViews directly. I am not able to display links for iViews.
I need 3 coloumns and 2 rows layout.
Can you please let me know how to achieve this?
Whether I have to create new layout? For this whether we will need NetWeaver Developer Studio?
Can we do it by creating HTML page. In the HTML page, we will have many links. These links will point to the iViews stored in SAP EP's KM. If so, what be the steps?
I know that it can be done by creating a PAR file and deploying it. But, we don't have Netweaver Developer Studio.
Can we acheive above without using NetWeaver Developer Studio?
Please help me.
Regards,
Brian

Hi Kedar,
Thanks. My requirement is that six iViews links should be shown in the portal content area.
The iViews links should be like
iView 1-Link         iView 2-Link           iView 3-Link
Help iView 1-Link Help iView 2-Link    Help iView3-Link
When user will click on any iView link, the relevant iView should be displayed. The iView can be displayed in seperate new page. So naturally five iView link will not be displayed.
I am planning to create one HTML page and store it in KM. I will call this page in portal content area.
There will be hyperlink on this HTML page. The hyper link will be attached to other iView links in KM.
Whenever user will click on any Help link or iView link the corresponding iView will be called from KM.
So in KM we will store 7 objects. 3 HTMLpages for help. 1 HTML page for main page.
Other 3 will point to iView-Link1, iView-Link2 and iView-Link3.
Can I do so? Will it sort out my problem?
Thanks

Unable to open LifeCycle Designer in Netweaver Developer Studio

I was trying to work on SAP interactive forms by Adobe.
1.I have installed SAP NetWeaver Developer Studio Version: 7.0.09
2.I have installed Adobe LiveCycle Designer ES 8.1
3. I have Adobe Reader 7.0.
Now when I am editing the interactive form from NWDS, it says "Could not find the required product, Install SAP Interactive Forms - Adobe Live cycle designer to edit the Interactive Form"
Have I missed some additional settings after the installation? And is there anything to do with the versions?

Hi Lien,
I'm too facing same issue.
My softwares have following versions:-
1. Adobe Livecycle Designer ES 8.2 (Downloaded from Link: [here|http://www.adobe.com/cfusion/tdrc/index.cfm?product=livecycle_designer] )
2. SAP Netweaver Developer Studio 7.0.15
What version you are having?
Your issue resolved after reinstalling NWDS?
Thanks and regards,
Amey Mogare
Edited by: Amey Mogare on Jul 16, 2009 8:53 AM

Unable to open Adobe LifeCycle Designer in Netweaver Developer Studio

I was trying to work on SAP interactive forms by Adobe.
1.I have installed SAP NetWeaver Developer Studio Version: 7.0.09
2.I have installed Adobe LiveCycle Designer 8.0
3. I have Adobe Reader 7.0.
Now when I am editing the interactive form from NWDS, it says "Could not find the required product, Install SAP Interactive Forms - Adobe Live cycle designer to edit the Interactive Form"
Have I missed some additional settings after the installation? And is there anything to do with the versions?
Can any one suggest me how to resolve this issue ?

Hello,
Can you tell us from where you have downloaded this Life Cycle Designer 8.0? Because there is Life Cycle for developing adobe forms and also one more is availalbe which we need to download from Service Market Place from SAP.
which one you have downloaded?
Regards
Nizamudeen SM

Problem launching Adobe Designer in Netweaver Developer Studio

Hi All,
I have successfully (I believe) installed all the components required to have Adobe Interactive Forms running on WAS 6.40 (SR1), in accordance with Achim Hauk's blog 'My struggles with the Adobe Document Services in WAS6.40' (thanks Achim!).
When I go to try the Interactive Form tutorial, and I launch the Adobe Designer 6.0 from Netweaver Developer Studio (version 2.0.9) by right-clicking on my InteractiveForms UI element and selecting 'Edit', I get a popup error 'An error occurred decoding Base64 data - encoded data is invalid or corrupted'. Does anyone know what this means and how to correct it? When I press the OK button on this popup the Adobe Designer is correctly launched, however any changes I make within the Designer don't seem to be saved.
Any help would be very much appreciated. Not sure if it makes any difference, but I have Adobe Reader 6.0.2 installed on my client.
Thanks
John Moy

Hi John,
I've installed the SP15 sneak preview last weekend. Based on my experience, if you are not using SSL set up, you only need three steps to set up ADS.
1. Create user ADSUser and user group ADSGroup
2. Set up basic authentication
3. Set up credential file
Now, step 1 and 2 which is in the guide is already done when you finish the installation of sneak preview SP15. All you have to do is to set up credential file.
I was having problem with Read timed out issue, and Markus pointed that web service time out need to be increased in my case. I haven't tested it yet since I am away from my PC, but i'm pretty sure it will fix the time out problem.
Also if you download the credential a while back, that file will expired the end of this month (Feb). Markus has posted a new credential file which will expire in June.
Regards,
Iwan

Sap Netweaver Developer Studio Error.....

Hi guys.
I have a problem with Sap Netweaver Developer Studio i have installed JDK and NDS in my pc and i try to make the examples, i have finished to develop the applications(without problems) but i couldn't deploy them, i have a portal server installed and running, i tried to configure the server name in the J2EE Engine Configuration but it had no effect.
I have the next error
Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !

Oscar,
for WebDynpro-Projects you can create an .ear-archive in the context menu of your porject ("Create archive") that you have to deploy with SDM. BUT: webdynpro requires WebApplication Server 6.40! You cant use a webdynpro-project in your current ep60sp2-installation.
for portal applications you can export a .par-arcive in the context menu of your project ("Export...", choose "PAR file") that you can import in your portal.
you can't test your application without deploying it to a server. if you haven't got a connection to the server during developing, you have to install a portal or at least a WAS6.20(Java) & EP60SP2 or WAS640(java) & EP60SP>2 locally on your computer.
if you choose to do that, i recommend the WAS6.40(Preview) because you can then develop webdynpros, too.
kr, achim

Regarding Connecting with oracle with sap netweaver developer studio

hi
i want to use oracle instead of max-db so can u
please tell me the procedure how to connect to sap netweaver developer studio and was server
bye

Oscar,
for WebDynpro-Projects you can create an .ear-archive in the context menu of your porject ("Create archive") that you have to deploy with SDM. BUT: webdynpro requires WebApplication Server 6.40! You cant use a webdynpro-project in your current ep60sp2-installation.
for portal applications you can export a .par-arcive in the context menu of your project ("Export...", choose "PAR file") that you can import in your portal.
you can't test your application without deploying it to a server. if you haven't got a connection to the server during developing, you have to install a portal or at least a WAS6.20(Java) & EP60SP2 or WAS640(java) & EP60SP>2 locally on your computer.
if you choose to do that, i recommend the WAS6.40(Preview) because you can then develop webdynpros, too.
kr, achim

Deploy a Library with the NetWeaver Developer Studio 7.1

Hi All,
i would like to deploy a jar-file as a library on PI 7.1 with the NWDS 7.1.
It is different to 7.0.
I hope anyone can tell me how to do this..
Thanks
Christoph

Hi,
Here is the process to deploy a Library project:
1.Defining Libraries:
     To define J2EE libraries in the SAP NetWeaver Developer Studio, you first create a corresponding Library project .Then you have to add all necessary JAR files or references to other J2EE Engine components.
2.Creating a Library Project:
     Choose File ® New ® Project.Follow the wizard to create a library project.The wizard generates an empty Library project. After the generation is completed, the J2EE perspective is opened automatically. The logical project structure is displayed in the J2EE Explorer and contains the two XML files: sda-dd.xml and provider.xml.
3.Adding JARs:
       1.      Choose the server/provider.xml node and choose Open from the context menu.The multipage editor opens in the right pane.
       2.      Choose the Jars tab.
       3.      Choose the Jars node followed by Add.
       4.      Select one or more JARs from your workspace and confirm by choosing OK.
4.Adding References:
       1.     Choose the server/provider.xml node and choose Open from the context menu.The multipage editor opens in the right pane.
       2.      Choose the References tab.
       3.      Choose the References node followed by Add.
       4.      You can either create a new reference or select an existing one.
5.Creating a Library Archive :
       1.     Select the library project node in the J2EE Explorer.
       2.      Open the context menu and choose Build Library Archive.
       3.      Choose OK to confirm
6.Deploying a Library Archive :
Prerequisites:·    The SDA file for the library project has been created successfully.
·        You have started the J2EE Engine on which the archive is to be deployed.
·        The settings in Window --> Preferences --> SAP J2EE Engine( SAP PI) are correct.
     Process:
       1.      In the J2EE Explorer, expand the library project node and select the relevant archive.
       2.      Open the context menu and choose Deploy to corresponding J2EE Engine.
Regards,
Kalpana

Deployable External Library in NetWeaver Developer Studio 7.01.06

I'm using SAP NetWeaver Developer Studio Version: 7.01.06 Build id: 201001061835
I need to make an External Library with some JARs inside. I've made an External Library component and I've created Assembly and Compilation public parts. After A LOT of attempts to make things work, I've resorted to using a custom build script to copy the JAR in the public part output folders. I've added the Compilation public part dependency in my Web Dynpro's Used DC list.
The Web Dynpro builds without errors.
Now the problem is that when I run the Web Dynpro application it gives me a ClassNotFound Error.
I've followed the instructions of many different guides and no one worked. I've found thousands of different procedures all to make the same thing and all of them differed in crucial parts. I'm stuck here with no ideas on how to make this ******* IDE to work.
I've tried to create an J2EE Server Component Library to which I've added the Assembly public part of the External Library but the GEN folder of the public part directory of J2EE SCL is empty! I have NO application*.xml files inside the J2EE SCL to edit.
If you're reading this and you're kind enough to help me, thank you.
Remember I have version 7.01.06.
Thank you again,
Pietro

Hi
Just out of curiosity, is your project of type DC?
If it is DC allow me to quote Mr Walter Kahn
The solution using DC's is very simple.
As a first step, undo all the stuff you have done up to now in this thread, including removing any build-time references, and deleting anything you entered in the application-xml files. When you are back to a "clean" Web Dynpro DC, do the following:
Step 1: Create an External Library Development Component
1.1) Switch to Development Infrastructure perspective.
1.2) Create a new dc of type External Library (eg. mycompany.com/downloadexcel/lib)
1.3) Switch to the Resource perspective when prompted and copy your JAR's to the libraries folder of the project.
1.4) View the Component Properties (Window -> Show View -> Component Properties)
1.5) Click the tab "Public Parts".
1.6) Add two public parts, one for COMPILATION and one for ASSEMBLY. Give them names likeexport_excel_comp and export_excel_asbly
1.7) Right-click each public part, then click Manage Entities -> Archive and select all the JAR's presented for selection.
1.8) Click the Permissions tab, and check Entity Forwarding Allowed.
Step 2: Create an Enterprise Application Development Component
2.1) Switch to Development Infrastructure perspective.2.
2.2) Create a new dc of type J2EE -> Enterprise Application (eg.mycompany.com/downloadexcel/ear)
2.3) Switch to the JavaEE perspective when prompted.
2.4) View the Component Properties (Window -> Show View -> Component Properties)
2.5) Click the Dependencies tab, and add a dependency to the DC created in Step 1. Do not change any of the default options.
2.6) Click the Permissions tab, and check Entity Forwarding Allowed.
2.7) Click the Public Parts tab and create a new Public Part of type COMPILATION. Give it a name, eg. pp_export_excel
2.8) Right-click this public part, choose Reference Entities and select the COMPILATION public part defined in step 1.6 above.
2.9) Right-click this dc, and do Development Component -> Build.
Step 3: Using the External Library in Your Web Dynpro Application
3.1) Switch to Web Dynpro perspetive.
3.2) View the Component Properties (Window -> Show View -> Component Properties)
3.3) Highlight your Web Dypro dc, and then in the Component Properties window select theDependencies tab.
3.4) Add a dependency to the dc created in Step 2. Accept all default options.
3.5) Build and deploy the Web Dynpro dc. If you have not changed any of the default options along the way, you will notice that the EAR of Step 2 also gets deployed.
Your Web Dypro dc should now compile correctly and also run on the server as expected.
Quoted from here.
You may also refer to my blog where I use external jars ....
regards
Yuval

SAP NetWeaver Developer Studio Integration

To whom it may concern,
I would like to integrate SAP product by using SAP NetWeaver Developer Studio. However, I do not know how to import those libraries into SAP NetWeaver Developer Studio and try with the coding. I have downloaded BusinessObjects Edge Series Trial version and wish I could try to integrate it using SAP NetWeaver Developer Studio.
Is there any guide for me please??
I really need your help and will appreciate it.
Thanks

Hi Oliver,
Sorry for asking the same thing because I really can't get any idea till now. I really need help because there is no expert around me that can help me.
Could you please explain to me and teach me how and what should I do now?
I really thank for your help
Regards
Lai Hung

From Where can i install ABAP plug-in in SAP Netweaver Developer Studio 7.3?

Hello,
I have Installed SAP NetWeaver Developer Studio 7.3 and I was trying to install ABAP plug-in but i couldn't found the link to install.
Later i found SAP Development Tools for Eclipse this link but its not working. As i came to know it will work only for Luna (4.4) or Kepler (4.3).
Would you please let me know how to install ABAP plug-in in SAP NetWeaver Developer Studio 7.3.
Thanks and Regards,
Shaik Shabeer Ahmed.

Hello Ahmed,
Use the links in that page:
NWDS Download Links - Java Development - SCN Wiki
And here also an installation guide:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80a100d2-109f-2e10-e996-c2b80803740b?overridelayout=t…
Best regards,
Serhat

Cannot deploy from netweaver developer studio to application server

Hi
I am trying to deploy a simple EAR (ConverterEAR) to my application server.
From NW developer studio, right clicked on the SAP server that I have configured and try to a publish. It gives me the below exception. For some reason its trying to contact my old IP address. Is there a file where I can change this setting. My Laptop is set to use DHCP so my IP changes when I reboot my laptop. I also have configured a Microsoft loop back adapter.
ct 16, 2007 2:58:42 PM /userOut/daView_category (eclipse.UserOutLocation) [Thread[Thread-17,5,main]] ERROR: com.sap.ide.eclipse.deployer.api.APIException: ConnectionException,cause=NamingException.Cannot get initial context.
Reason: Exception while trying to get InitialContext.
     at com.sap.ide.eclipse.deployer.dc.DCClientImpl.<init>(DCClientImpl.java:45)
     at com.sap.ide.eclipse.deployer.dc.DCClientFactoryImpl.createClient(DCClientFactoryImpl.java:80)
     at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:181)
     at com.sap.ide.eclipse.sdm.threading.DeployThreadManager.deploy(DeployThreadManager.java:358)
     at com.sap.ide.eclipse.sdm.SDMManager.deployArchives(SDMManager.java:148)
     at com.sap.ide.j2ee.wtpserver.SAPPublisher$DeployRunnable.run(SAPPublisher.java:380)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.sap.engine.services.dc.api.ConnectionException: NamingException.Cannot get initial context.
Reason: Exception while trying to get InitialContext.
     at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:189)
     at com.sap.engine.services.dc.api.session.impl.SessionImpl.<init>(SessionImpl.java:115)
     at com.sap.engine.services.dc.api.session.impl.SessionFactoryImpl.newSession(SessionFactoryImpl.java:24)
     at com.sap.engine.services.dc.api.impl.ClientFactoryImpl.createClient(ClientFactoryImpl.java:66)
     at com.sap.ide.eclipse.deployer.dc.DCClientImpl.<init>(DCClientImpl.java:42)
     ... 6 more
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
shadow:50104 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: XX.XX.139.134 and port: 50104]
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(Initia:lContextFactoryImpl.java:488)
     at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
     at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
     at javax.naming.InitialContext.init(Unknown Source)
     at javax.naming.InitialContext.<init>(Unknown Source)
     at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:166)
     ... 10 more
Caused by: com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
shadow:50104 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: XX.XX.139.134 and port: 50104
     at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:53)
     at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:33)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:352)
     ... 15 more
Environment
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP01
Build id: 200710090648
SAP_J2EE_Engine_Version -- 7.1.3301.150742.20070516182900
Thanks
Madhu

Hi,
you could change the connection settings to the server in the preference page in the Developer Studio. Check <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/45/0cf28fb4d01f23e10000000a1553f7/frameset.htm">this</a> page in the documentation for details.
In your case, you can also use the host name of your laptop, or even just localhost, in the Message Server Host field in the preferences page. This should overcome the problem with dynamic IPs.
Hope that helps!

How to edit a PDF document in Netweaver Development Studio?

Dear Experts,
I am trying to edit a PDF file in the Netweaver Developer Studio.
Can anybody tell me how can I import and edit it in the Netweaver Developer Studio?
I am trying to do some editing.Eg. adding action buttons, adding input fields etc to the PDF file.
If somebody has previously done such things or have some idea, I would like to hear from your experiences.
Many thanks
Rgds,
Sudeep

Hi Satya,
Thank you for the immediate response.
Now I can import the pdf files and edit them.
However there is a problem.
I can only open the pdf files which I created by the developer studio.
When I open the pdf files those created by a scanner, they appear blank. However, when I open the same files with acrobat reader, the contects in the file appear.
I will be very thankful if you could help me in this.
Many thanks
sudeep

Netweaver Developer Studio required Libraries

Similar Messages

Maybe you are looking for