Netweaver developer system design

Is it possible to build a netweaver developer environment on a PC from the downloads at SDN plus my own .Net studio. Including the dowloads of the PDK etc.
Components would therefore be
WAS 6.4 Sneak Preview
SAP Enterprise PDK for .Net
SAP Netweaver Visual Studio
MS Visual Studio .Net Professional
Anyone ever tried this?
Ross

Hi Ross,
Yes you can thing is check minimum hardware requirements.
You can install all the applications along with WAS which you mentioned.
WAS can le in the local host or remote but NWDS(IDE) resides is the on your workstation.
Hope this helped you
Regards
RK

Similar Messages

Unable to open LifeCycle Designer in Netweaver Developer Studio

I was trying to work on SAP interactive forms by Adobe.
1.I have installed SAP NetWeaver Developer Studio Version: 7.0.09
2.I have installed Adobe LiveCycle Designer ES 8.1
3. I have Adobe Reader 7.0.
Now when I am editing the interactive form from NWDS, it says "Could not find the required product, Install SAP Interactive Forms - Adobe Live cycle designer to edit the Interactive Form"
Have I missed some additional settings after the installation? And is there anything to do with the versions?

Hi Lien,
I'm too facing same issue.
My softwares have following versions:-
1. Adobe Livecycle Designer ES 8.2 (Downloaded from Link: [here|http://www.adobe.com/cfusion/tdrc/index.cfm?product=livecycle_designer] )
2. SAP Netweaver Developer Studio 7.0.15
What version you are having?
Your issue resolved after reinstalling NWDS?
Thanks and regards,
Amey Mogare
Edited by: Amey Mogare on Jul 16, 2009 8:53 AM

Unable to open Adobe LifeCycle Designer in Netweaver Developer Studio

I was trying to work on SAP interactive forms by Adobe.
1.I have installed SAP NetWeaver Developer Studio Version: 7.0.09
2.I have installed Adobe LiveCycle Designer 8.0
3. I have Adobe Reader 7.0.
Now when I am editing the interactive form from NWDS, it says "Could not find the required product, Install SAP Interactive Forms - Adobe Live cycle designer to edit the Interactive Form"
Have I missed some additional settings after the installation? And is there anything to do with the versions?
Can any one suggest me how to resolve this issue ?

Hello,
Can you tell us from where you have downloaded this Life Cycle Designer 8.0? Because there is Life Cycle for developing adobe forms and also one more is availalbe which we need to download from Service Market Place from SAP.
which one you have downloaded?
Regards
Nizamudeen SM

Problem launching Adobe Designer in Netweaver Developer Studio

Hi All,
I have successfully (I believe) installed all the components required to have Adobe Interactive Forms running on WAS 6.40 (SR1), in accordance with Achim Hauk's blog 'My struggles with the Adobe Document Services in WAS6.40' (thanks Achim!).
When I go to try the Interactive Form tutorial, and I launch the Adobe Designer 6.0 from Netweaver Developer Studio (version 2.0.9) by right-clicking on my InteractiveForms UI element and selecting 'Edit', I get a popup error 'An error occurred decoding Base64 data - encoded data is invalid or corrupted'. Does anyone know what this means and how to correct it? When I press the OK button on this popup the Adobe Designer is correctly launched, however any changes I make within the Designer don't seem to be saved.
Any help would be very much appreciated. Not sure if it makes any difference, but I have Adobe Reader 6.0.2 installed on my client.
Thanks
John Moy

Hi John,
I've installed the SP15 sneak preview last weekend. Based on my experience, if you are not using SSL set up, you only need three steps to set up ADS.
1. Create user ADSUser and user group ADSGroup
2. Set up basic authentication
3. Set up credential file
Now, step 1 and 2 which is in the guide is already done when you finish the installation of sneak preview SP15. All you have to do is to set up credential file.
I was having problem with Read timed out issue, and Markus pointed that web service time out need to be increased in my case. I haven't tested it yet since I am away from my PC, but i'm pretty sure it will fix the time out problem.
Also if you download the credential a while back, that file will expired the end of this month (Feb). Markus has posted a new credential file which will expire in June.
Regards,
Iwan

Integrate Adobe LIfeCycle Designer 8.0 into NetWeaver Development Studio 7

Hi everyone,
I need to integrate Adobe LIfeCycle Designer 8.0 into NetWeaver Development Studio, the issue is that I have installed Adobe LifeCycle but I wanted to know how in integrated into Netweaver Development Studio 7.0
Thanks very much in advance,
Armando

Hello Armando,
If u have installed NWDS, during the NWDS there is a checkbox to include Adobe LiveCycle Designer.However , NWDS 7 setup includes designer 6.0.
Case 1 : If u have not checked the above checkbox during NWDS installation.You can directly install any Designer version.
Case 2 : If u have checked the checkbox during NWDS installation , when u install designer 7 or 8 it will give a message saying A version of designer already exists,In the above scenario, you will have to either uninstall desginer 6(if possible) or reinstall NWDS without checking the Desinger Checkbox.After that you can install any designer version u want.
Hope it helps,
Regards,
Virag

Configuring adobe live cycle designer in netweaver developer studio

Hi,
I installed Adobe Life Cycle designer 7.1 on Studio for NW04S SP9 , I open up the interactive forms ui element .
Then I opened the library pallete on the studio, but I dont find the webdynpro tab.
What should I do.
Thanks,
Harish

Hi Amol,
I have done this but to no avail.
I picked the prerequisites from help.sap.com
Let me know what I have missed:
You have installed the SAP NetWeaver 4.0 Developer Workplace. You must also have Acrobat Reader 7.0 or a full version of Adobe Acrobat 7.0 if you want to use the InteractiveForm UI element. In addition, the Adobe component of the SAP NetWeaver Developer Studio must be installed as this component is not installed in the standard version. However, it is very easy to install it if you want to use interactive PDF forms.
The above is the prerequisite in help.sap.com
What I have done is
1. Downloaded Netweaver Developer Studio NW04S SP9 , from service.sap.com
2. Downloaded Adobe Life Cycle designer 7.1 from service.sap.com
3. I run the aldsetup.exe
Let me know what else needs to be done
Thanks,
Harish P Subramanian
Mobile : 9903306035

Feedback thread for "How To Design a SAP NetWeaver - Based System Landscape

I have just published a RIG How To Guide called [How To Design a SAP NetWeaver - Based System Landscape|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50a9952d-15cc-2a10-84a9-fd9184f35366]. You can read my [blog |http://www.sdn.sap.com/?blog=/cs/weblog/view/wlg/8877]on it. This thread is collect feedback and discussion on the Guide.

Hi Matt!
This is definitely interesting reading and a lot of projects I've been in could have benefitted from it had it been carefully read beforehand by some of the involved parties.
What I like especially is the fact that this is not only for technical consultants (who should know about most of these things anyway) but for the people closer to the business who need to find agreements with the technical guys.
Good job...
Jörg
Some comments to what I read:
I noticed that you use the term 'server virtualization' (section 3.3.1) quite generally. Maybe it would be worth introducing the term 'server consolidation' (which you use later in the document) already in this early chapter. My experience shows that (especially recently) a lot of customers are interested in 'virtual servers' (meaning a virtual server with an OS installed separately), not really knowing what they're talking about and often better advised to use 'server consolidation' (one OS, many SIDs). These two concepts are similar in terms of sharing hardware resources, but quite different in terms of the implications toward administration.
In section 4.2.1.3 you mention (in brackets) the Usage type to which the client belongs for the Business Explorer and the J2SE Adapter Engine if I understood that correctly. There is no UT mentioned for the other clients and there is no explanation on what the bits in brackets are supposed to mean. (I first expected the 'BeX' abbreviation when I saw something in brackets...)

ESA system and Netweaver developer studio

hi
how can i connect to ESA system from Netweaver developer studio?
is there a tutorial i can learn from?
thanks

hi guy,
there is no such thing like a "ESA system". ESA(Enterprise Service Architecture) or more precisely SOA(service oriented architecture) is an idea or a paradigm, describing a kind of IT-architecture(application level) capable to meet a number of today's challenges of heterogenous system landscapes (find yourself some kick-start literature to get familiar with SOA/ESA principles).
This said, you can't "connect to ESA System" from NWDS, but you can develop software(e.g. services) in NWDS to be deployed to a system that resembles a service oriented architecture, for instance SAP Netweaver, which adds enterprise level features (scalability, stability, sw lifecycle management, ...) to it's SOA blueprint nd therefore calls it ESA.
hope this clarifies some things,
anton

Netweaver development infrastructure

hellow i am new to portals?
can u give some idea about NWDI?

Hi,
NetWeaver Development Infrastructure (NWDI), supports development in arbitrarily large projects. No matter what type of entity you are building, you can:
     Organize your development items in Software Components (SCs) and Development Components (DCs)
     Exchange DCs with the Design-time Repository (DTR), which is responsible for source-code management
     Delegate the build process to the Component Build Service (CBS) that runs a central build, automatically using all the latest library versions, and
     Trigger the transport of completed DCs to the next level of system, e.g. from development to test, and from test to release systems (CMS).
The NWDI in its full version will contain: a source repository (Design Time Repository, DTR), a deployment tool (Software Deployment Manger, SDM), a service to guarantee uniqueness of names (Name Service), the Component Build Service (CBS) for a central build, and the Change Management Service (CMS) to set up development landscapes and handle all steps in the software life-cycle. The Java Dictionary supports the global definition of tables and data types.
Using a central infrastructure reduces development time and completeness by providing a consistent environment for the whole software life-cycle.
It provides several development scenario:
     1.Team-Oriented Development
     2.Development with Components
     3.Layered Development
Above all using NWDI you can create your own development components,Software units from exsisting ones, that saves lots of time.
All Business Packages can be modified via NWDI only.
Regards,
Ameya

Error while installing the EHP 1 for SAP NetWeaver Developer Studio (NWDS)

Dear All,
I am trying to install the EHP 1 for SAP NetWeaver Developer Studio (NWDS) 7.1 .It got installed once but when i was trying to deploy the application i was getting an error sayind that we need to have JDK1.5 Update 14 or higher for the installation.
Now i have JDK 1.5.0_14 installed in my system.So i Uninstalled the EHP 1 for SAP NetWeaver Developer Studio (NWDS) and i am trying to reinstall it but i am getting the following error
ERROR:
Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\NS46249\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\Program Files\SAP\IDE\CE7.1.1\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081112155351". Log file: "C:\DOCUME1\NS46249\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
Can anybody please help me in resolving this issue.Please help needed as early as possible.
Thanks in Advance:)
Regards,
Nishita Salver

Dear Nishita,
I hope you have removed the older version of jdk before installing the new version of jdk. Also after un installation of NWDS, did you delete all the temp files and also the directories created during the original installation of NWDS. Also did you restart your system after the uninstallation of NWDS EHP1 and older jdk before reinstallation of the two softwares?
Regards,
Veera
P.S. The first thing you can try is restarting the PC and try resuming the installation, if it doesnt succeed, please remove all traces of NWDS and JDK, restart pc and then resinstall both of them.

Problems deploying par file via Netweaver Developer Studio

Hello,
I have problems deploying a par file using the SAP Netweaver Developer Studio.
In the SNWDS i configure the following:
Window -> Preferences -> SAP Enterprise Portal
Alias: IEP
Host: khz059
Port: 52900
Login: Administrator
Description: Testportal
The logon Url of the portal is http://khz059:5290052900/irj/portal
If i try to upload a par file via "Quick PAR Upload" i get the error messages:
"Unable to connect to the portal
Operation failed: Please make sure the server 'IEP' (khz059:52900) is running or check the log (sap-plugin.log) for more detail."
Am I using the proper settings? Am I using the wrong port?
I don't know whats wrong.
Can anyone help me?
The logfile shows:
[12.09.05 / 14:53] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > No Information
java.io.IOException: Error writing to server
 at sun.net.www.protocol.http.HttpURLConnection.writeRequests(HttpURLConnection.java:302)
 at sun.net.www.protocol.http.HttpURLConnection.writeRequests(HttpURLConnection.java:314)
 at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:634)
 at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.readResponse(DeployEngine.java:361)
 at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.uploadPar(DeployEngine.java:433)
 at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.deploy(DeployEngine.java:220)
 at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.processUpload(SAPMPWizard.java:404)
 at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.run(SAPMPWizard.java:338)
 at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
 at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
 at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:758)
 at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard.performFinish(SAPMPWizard.java:519)
 at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
 at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
 at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
 at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
 at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
 at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
 at org.eclipse.jface.window.Window.open(Window.java:563)
 at com.sap.portal.developmentTools.general.uploader.QuickPARUploader.run(QuickPARUploader.java:146)
 at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
 at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
 at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
 at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
 at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
 at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
 at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
 at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
 at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
 at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
 at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
 at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
 at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Best regards,
Nils Kloth

Hi Nils,
I think you must have selected the defualt checkbox (Try and uncheck that). Also uncheck the checkbox for "Yes, I want to remeber the password for deployment" if it is also selected. When you deploy the par file now enter the password and try to deploy. I think this will solve your problem.
Apart from this, try this methos of deploying the Par file.
1) Save you project. Right click it and "Quick par Upload".
2) On your browser type
"http://<your_server_name>:50000/irj/servlet/prt/portal/"
Your case:
http://khz059:52900/irj/servlet/prt/portal/
or same page you can get by navigating:
System Administration-> Support-> Portal Runtime-> Administration Console.
3) At the option "Please specify a Portal Archive file (PAR) and press "upload" to store it into the PCD." Deploy your par file by giving the path.
Now you file is deployed on the server. If you want to create an Iview from this deployed .par file then :
1) On your portal. Follow the path: Content Administrator-> Portal Content -> Portal Content(sub-option). Right click -> New from par ->iView.
2) Here in the list you will find the par file which you have uploaded. Proceed as said.
3) You will finally have an iView. Right click it and preview it.
I hope this solves your problem.
Regards
Pravesh
PS: Please consider rewarding points if helpful.

Getting an error in Java Project in SAP NetWeaver Developer Studio

Hi,
I am getting this error in my Java Project developed in SAP NetWeaver Developer Studio.
Exception occurred during launch Reason: Source locator does not exist org.eclipse.jdt.debug.ui.javaSourceLocator
Is this problem of not defining some External .jar file or problem with Eclipse?
I am developing Java Project which connects with SAP Master Data Management.
I am referring to a PDF named "How To identify identical master data records using SAP MDM 5.5
Java APIu2019s".
Regards
Kaushik Banerjee

This may be because of the metadata(registry) cache when it was written out by a second instance of NWDS.
So the plug-in appears in the file system but NWDS doesn't see it in the metadata
Delete the .metadata file from your workspace and then start up NWDS. It might work.
Regards,
PG
Edited by: PG on Dec 16, 2008 3:18 PM

Transport Webi Reports and Web services as the backend of dashboards from BO Production to BO Development system

Hello Experts,
I am working on SAP BO 4.1. I have made several dashboards on top of web services ie;Web Service Method. I have 2 systems in BO ie; Development and Production Systems.The BW production system is connected to BO Development and Production both.
The Webi reports are made on top of BI BEx Query. From the webi reports, BI Web Services are made on top of which the dashboards are made further.
The Webi Reports, Web Services and the Dashboards everything is made directly in BO Production.
My question is, Can I transport the Webi Reports and the Web Services from BO Production to BO Development?
And If yes, will it have any other impact on webi reports, web services or dashboards?
Thanks & Regards,
Alfred Thomas

Hi Gill,
As per your reply,with the promotion managament i have make the web services again manually in Dev system...Right?
Is there any way possible that i can transport the webservices and the webi reports usind Query AS A Web Service Designer. And if yes, through this QAAWS will the WSDL or the URL required for the web services in the connection button in dashboards will automatically updated or changed as per the Development System?
But i am not able to enable the "Deploy to Other servers Option" in QAAWS.
Can you please help?
Regards,
Alfred thomas

Error when launching Netweaver Developer Studio

Hi.
can someone help me. I installed Netweaver Developer studio but when I try to launch it.
I get this error:
"Problem during startup. Check the .log file in the ".metadata" directory of your workspace"
!SESSION Aug 30, 2005 14:50:39.954 -
java.version=1.4.2_06
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86 -feature com.sap.java.ide -consolelog -debug C:\j2sdk1.4.2_06\bin\java.exe
-Xmx512m
-Xms128m
-XX:PermSize=32m
-XX:MaxPermSize=128m
-DallUserDir='C:\Documents and Settings\All Users\Application Data'
-cp C:\Program Files\SAP\JDT\eclipse\SapStartup.jar com.sap.ide.eclipse.startup.Main
-os win32
-ws win32
-arch x86
-feature com.sap.java.ide
-showsplash C:\Program Files\SAP\JDT\eclipse\SapIde.exe -showsplash 600
-consolelog
-debug -data C:\NetweaverDevStudio\workspace -install file:C:/Program Files/SAP/JDT/eclipse/
!ENTRY Startup 1 0 Aug 30, 2005 14:50:39.954
!MESSAGE Sap NetWeaver Developer Studio - Build: 200507190119
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Aug 30, 2005 14:50:40.188
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:286)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:795)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:602)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: java.lang.NumberFormatException: For input string: ""
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:489)
     at java.lang.Integer.parseInt(Integer.java:518)
     at com.tssap.config.ProxySettings.parse(ProxySettings.java:184)
     at com.tssap.config.ProxySettings.loadFromPreferences(ProxySettings.java:114)
     at com.tssap.config.Startup.runBeforeWBStartup(Startup.java:39)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:65)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more
Please advise.
thanks
Jennifer

Hi Jennifer,
             This problem is a common one.
1)Make sure that you have Administrator rights in the systems where you are launching NW Studio.
2)Go to your workspace check the log file (basically a text file)
3)Clear your unwanted registry in your registry folder.
If this doesn't work, re-install NW Studio by deleting the older version from Add or Remove Program in control Panel.
Give the Java bin path correctly and devote any folder of your choice to be your workspace.
Hope it helps.
Regards,
Guru.
P.S :- There is no link for launching of NW Studio with Internet Explorer as both are different applications.

How to install/start local J2EE engine in Netweaver Developer Studido

Hello,
I just installed NDS 2.0.11 and I'm having a heck of a time figuring out how to actually test my code.
Went thru tutorial for creating Calculator J2EE sample. When I get to step that describes how to deploy the EAR I get error below. I've gone into Windows|Preferences|SAP J2EE Enginee section thinking I could configure/start engine from there but I can't figure out what to do.
I've searched these forums and the NDS help files with no luck.
I didn't get any prompts during install asking me whether or not I wanted to install a local J2EE engine.
Has anyone run into this and do they know the answer. ANY help would be greatly appreciated.
Thanks!
David
Mar 9, 2005 11:36:49 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[002]Deployment aborted
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !

RK,
Thanks for the link. It did help a little. I found some of the errors on that page and it helped me get past them.
The last issue I had run into was issue 1-13. So I created a new user on my laptop and gave it admin rights.
The install got a little further but now it's stuck again. Here are the messages from the install log:
SAPinst is getting started.
Please be patient ...
guiengine: no GUI connected; waiting for a connection on host TAGname, port 21212 to continue with the installation
guiengine: login in process
WARNING: Could not read file control.xml. Please make sure that you called SAPinst with the correct control file (the control file is given to SAPinst as its first command line parameter or as value of the command line property SAPINST_CONTROL_URL)
ERROR Could not create DOM from control.xml
Exit status of child: 1
Any ideas?
I started the install process by running SAPinst.exe. When the installation window opened I chose
SAP NetWeaver '04 Support Release 1
Java System
MaxDB
Developer Workplace
SAP Netweaver Developer Workplace Installation
Thanks in advance for help!

Netweaver developer system design

Similar Messages

Maybe you are looking for