Netweaver development life cycle .

Hi Folks .
is there any possiblity to develop & debug ABAP code and applications under the Eclipce editor in Netweaver Platform ??

Hi Herzel,
Developing ABAP code is not possible at present but debugging is possible.Please refer to the link below it contains a tutorial of how to debug the ABAP code from NWDS.
https://www.sdn.sap.com/sdn/downloaditem.sdn?res=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/011be490-0201-0010-2f90-91e872e9490c
Regards,
Vijith

Similar Messages

Phases in development life cycle

Hi
    can any body explain briefly explain "various phases in development life cycle(in SAP Terminology) ".And also provide links to blogs as soon as possible.
    Plz provide info on DEBUGGING techiniques in XI.
                                                                                Regards,
                                                                                Vinod.

check this doc for debugging:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbc7d790-0201-0010-bea6-c549902e93e2
and the s/w eng development lifecycle holds good for xi also

What is (sdlc) software developement life cycle management in hyperion esssbase and planning ?

what is (sdlc) software developement life cycle management in hyperion esssbase and planning ?

SDLC is a high-level concept (https://en.wikipedia.org/wiki/Systems_development_life_cycle) not a feature of a particular software package, so I'm really not sure what you're asking.
If you're asking about the somewhat related topic of moving changes through environments, look at About Lifecycle Management.

Software Development Life Cycle

Hi, this isn't about RoboHELP so hope it's OK here but my
company is about to redesign their SDLC and I want to make sure
that Documentation gets a proper look in. Are there any protocols
anywhere or examples of good processes and systems for
communication between developers and help authors?
Thanks

We are a very small company but all of our help authors are
also product testers, who are involved early on. We are also all
research scientists who are using the product daily. I believe this
is a very good model (it is, however, dependent on the genius of
our company president). We do with five people, what our leading
competitor company does with 500.
I would very strongly support the comments made by
ChetZeshonski. As it is not possible to design software that is
"intuitive" for every user there will be design issues that cannot
be "corrected." If your SDLC links you to the product testing
cycle, you will be much better able to write instructional material
to get all end users up to speed.
Email me if you would like me to send you a .chm file of our
SDC.
John

About the sdlc(software development life cycle)

wat is the sdlc? wat model do we flow in any company?

In SAP the Development Methodology is called ASAP Methodology:
Project Preparation:
The first step in ASAP is Project Preparation. In this step the Functional Consultant will analyse the business process and define the system for SAP and will give the time line for the project. The Manpower required and the budgets are also considered in this step.
Blue Print Preparation:
This is second step in ASAP Methodology. In this step the Project Preparation scenarios are finalised. A out line of the Project is given in this step.
Realisation:
In this step actual development is taken place. The ABAPer is responsible for this step.
Testing:
In this step the development done by the abaper is being tested. This is the area where the Unit Test Document is prepared (i.e. Positive Testing and Negative Testing).
GO live and Support:
This is the final stage where the project is running in the live environment. In this step the bugs if any that are found in the go live procedure are fixed and the project will be considered as support project.
Rewards if useful.

SAP B1 SDK life cycle

hi,
Any body give life cycle of the SAP B1 SDK ,

Hi,
There is no particular life cycle of the SAP B1 SDK. It is the same as general Software Development Life Cycle.
Thanks,
Gordon

What is step by step in real time project i.e. end-to-end life cycle?

what is step by step in real time project i.e. end-to-end life cycle?

Hi Vamsi,
The below explanation gives you an idea of what is going to come after what in a software development.
These below stages are know as Software Development Life Cycle/Waterfall Model.
1. System/Information Engineering and Modeling
As software is always of a large system (or business), work begins by establishing the requirements for all system elements and then allocating some subset of these requirements to software. This system view is essential when the software must interface with other elements such as hardware, people and other resources. System is the basic and very critical requirement for the existence of software in any entity. So if the system is not in place, the system should be engineered and put in place. In some cases, to extract the maximum output, the system should be re-engineered and spruced up. Once the ideal system is engineered or tuned, the development team studies the software requirement for the system.
2. Software Requirement Analysis
This process is also known as feasibility study. In this phase, the development team visits the customer and studies their system. They investigate the need for possible software automation in the given system. By the end of the feasibility study, the team furnishes a document that holds the different specific recommendations for the candidate system. It also includes the personnel assignments, costs, project schedule, target dates etc.... The requirement gathering process is intensified and focussed specially on software. To understand the nature of the program(s) to be built, the system engineer or "Analyst" must understand the information domain for the software, as well as required function, behavior, performance and interfacing. The essential purpose of this phase is to find the need and to define the problem that needs to be solved .
3. System Analysis and Design
In this phase, the software development process, the software's overall structure and its nuances are defined. In terms of the client/server technology, the number of tiers needed for the package architecture, the database design, the data structure design etc... are all defined in this phase. A software development model is thus created. Analysis and Design are very crucial in the whole development cycle. Any glitch in the design phase could be very expensive to solve in the later stage of the software development. Much care is taken during this phase. The logical system of the product is developed in this phase.
4. Code Generation
The design must be translated into a machine-readable form. The code generation step performs this task. If the design is performed in a detailed manner, code generation can be accomplished without much complication. Programming tools like compilers, interpreters, debuggers etc... are used to generate the code. Different high level programming languages like C, C++, Pascal, Java are used for coding. With respect to the type of application, the right programming language is chosen.
5. Testing
Once the code is generated, the software program testing begins. Different testing methodologies are available to unravel the bugs that were committed during the previous phases. Different testing tools and methodologies are already available. Some companies build their own testing tools that are tailor made for their own development operations.
6. Maintenance
The software will definitely undergo change once it is delivered to the customer. There can be many reasons for this change to occur. Change could happen because of some unexpected input values into the system. In addition, the changes in the system could directly affect the software operations. The software should be developed to accommodate changes that could happen during the post implementation period.
Reward if helpful.
Thankyou,
Regards.

Configuring adobe live cycle designer in netweaver developer studio

Hi,
I installed Adobe Life Cycle designer 7.1 on Studio for NW04S SP9 , I open up the interactive forms ui element .
Then I opened the library pallete on the studio, but I dont find the webdynpro tab.
What should I do.
Thanks,
Harish

Hi Amol,
I have done this but to no avail.
I picked the prerequisites from help.sap.com
Let me know what I have missed:
<b>You have installed the SAP NetWeaver 4.0 Developer Workplace. You must also have Acrobat Reader 7.0 or a full version of Adobe Acrobat 7.0 if you want to use the InteractiveForm UI element. In addition, the Adobe component of the SAP NetWeaver Developer Studio must be installed as this component is not installed in the standard version. However, it is very easy to install it if you want to use interactive PDF forms.</b>
The above is the prerequisite in help.sap.com
What I have done is
1. Downloaded Netweaver Developer Studio NW04S SP9 , from service.sap.com
2. Downloaded Adobe Life Cycle designer 7.1 from service.sap.com
3. I run the aldsetup.exe
Let me know what else needs to be done
Thanks,
Harish P Subramanian
Mobile : 9903306035

What is life cycle management in netweaver architecture

hi all,
I am new to sap can any one help me by sending me links on life cycle management in NetWeaver architecture.

http://www.sap.com/platform/netweaver/pdf/BWP_SB_Unified_Lifecycle_Management.pdf
http://www.sap.com/solutions/business-suite/plm/pdf/BWP_Life_Cycle_Process_Support.pdf
http://www.filetek.com/software/product_sheets/datasheet_SAP.pdf

Unable to open Adobe LifeCycle Designer in Netweaver Developer Studio

I was trying to work on SAP interactive forms by Adobe.
1.I have installed SAP NetWeaver Developer Studio Version: 7.0.09
2.I have installed Adobe LiveCycle Designer 8.0
3. I have Adobe Reader 7.0.
Now when I am editing the interactive form from NWDS, it says "Could not find the required product, Install SAP Interactive Forms - Adobe Live cycle designer to edit the Interactive Form"
Have I missed some additional settings after the installation? And is there anything to do with the versions?
Can any one suggest me how to resolve this issue ?

Hello,
Can you tell us from where you have downloaded this Life Cycle Designer 8.0? Because there is Life Cycle for developing adobe forms and also one more is availalbe which we need to download from Service Market Place from SAP.
which one you have downloaded?
Regards
Nizamudeen SM

Netweaver development infrastructure

hellow i am new to portals?
can u give some idea about NWDI?

Hi,
NetWeaver Development Infrastructure (NWDI), supports development in arbitrarily large projects. No matter what type of entity you are building, you can:
     Organize your development items in Software Components (SCs) and Development Components (DCs)
     Exchange DCs with the Design-time Repository (DTR), which is responsible for source-code management
     Delegate the build process to the Component Build Service (CBS) that runs a central build, automatically using all the latest library versions, and
     Trigger the transport of completed DCs to the next level of system, e.g. from development to test, and from test to release systems (CMS).
The NWDI in its full version will contain: a source repository (Design Time Repository, DTR), a deployment tool (Software Deployment Manger, SDM), a service to guarantee uniqueness of names (Name Service), the Component Build Service (CBS) for a central build, and the Change Management Service (CMS) to set up development landscapes and handle all steps in the software life-cycle. The Java Dictionary supports the global definition of tables and data types.
Using a central infrastructure reduces development time and completeness by providing a consistent environment for the whole software life-cycle.
It provides several development scenario:
     1.Team-Oriented Development
     2.Development with Components
     3.Layered Development
Above all using NWDI you can create your own development components,Software units from exsisting ones, that saves lots of time.
All Business Packages can be modified via NWDI only.
Regards,
Ameya

Error while executing transport in HANA's application life-cycle management

Hi everyone,
we're currently developing our HANA-based software and would like to use HANA's application life-cycle management: transporting our product from one system to another. Everything seems to be set up correctly: two different systems, correct privileges, a product comprising delivery units comprising packages as well as a transport route between the systems. However, the transport always fails with the following error (example for a transport of a single DU):
[imdbhdb][HDB][2014.05.07 15:10.01.404][TransportService][0] Transport (delta) has been started for route ID: 1020 (Deliver Unit Transport)
[hanaserver][HDB][2014.05.07 15:10.08.323][Other][0] Get end export timestamp for DU name: PERSISTENCE
[hanaserver][HDB][2014.05.07 15:10.08.501][Other][12] Unable to retrieve end export timestamp: ReferenceError: assignment to undeclared variable errText
[imdbhdb][HDB][2014.05.07 15:10.12.402][TransportService][0] There will be 1 delivery units which will be transported.
[imdbhdb][HDB][2014.05.07 15:10.12.895][TransportService][12] Failed for DU: PERSISTENCE Vendor: LO Error: HTTP request failed. Status: 500. Error: Unable to retrieve end export time stamp.
[imdbhdb][HDB][2014.05.07 15:10.12.917][TransportService][12] TransportServiceError: Error occurred while performing the transport.
Does anyone know how to resolve this?
Thanks so much in advance,
Lukas

Hi everyone,
I am sorry I bothered you with this error. It was caused by me since I forgot to export a top-level file. This file must have defined a variable errText which other DUs depended on and could therefore not be activated.
Now, the transport works perfectly well and I'm really happy with it.
All the best
Lukas

Xcelsius 2008 - Life cycle management

All,
We have developed Xcelsius 2008 dashboards (by QAAWS) which are published in BO XI 3.0 Enterprise Infoview. How do we promote Xcelsius dashboard from development to production? Do Import wizard help on this?
Below are the workflow that I think about:
1) Create QAAWS in both development and production
2) Create dashboard in Xcelsius 2008 in development through WSDL URL created in QAAWS
3) Publish the report in BO 3.0 Infoview.
4) Through Import Wizard, import dashboard from dev to prod.
My question is how do we map the imported dashbaord in production to production WSDL URL.
Please let me know the above approach for Xcelsius 2008 life cycle management is correct.
Thanks
Jai

Thanks Jon. So all I need to change Web Service URL from:
http://bodevserver:8080/dswsbobje/qaawsservices/queryasaservice
to
/dswsbobje/qaawsservices/FIAR?WSDL.
But how will this change to production server WSDL URL when this report moves to prod by import wizard?
Below is the work flow I did in QAAWS client:
1) Created 2 URL one for Dev and another for Prod
2) Created first URL in development through QAAWS client and deploy the same in prod by changing the prod server name.
For Dev --> http://bodevserver:8080/dswsbobje/qaawsservices/FIAR?WSDL
For Prod --> http://boprodserver:8080/dswsbobje/qaawsservices/FIAR?WSDL
I am still confused how these above 2 links helpful in Xcelsius to do life cycle managemnet without any mannual interpretation.
Thanks
Jai

Unable to open LifeCycle Designer in Netweaver Developer Studio

I was trying to work on SAP interactive forms by Adobe.
1.I have installed SAP NetWeaver Developer Studio Version: 7.0.09
2.I have installed Adobe LiveCycle Designer ES 8.1
3. I have Adobe Reader 7.0.
Now when I am editing the interactive form from NWDS, it says "Could not find the required product, Install SAP Interactive Forms - Adobe Live cycle designer to edit the Interactive Form"
Have I missed some additional settings after the installation? And is there anything to do with the versions?

Hi Lien,
I'm too facing same issue.
My softwares have following versions:-
1. Adobe Livecycle Designer ES 8.2 (Downloaded from Link: [here|http://www.adobe.com/cfusion/tdrc/index.cfm?product=livecycle_designer] )
2. SAP Netweaver Developer Studio 7.0.15
What version you are having?
Your issue resolved after reinstalling NWDS?
Thanks and regards,
Amey Mogare
Edited by: Amey Mogare on Jul 16, 2009 8:53 AM

Life Cycle Management BODI

Hi folks,
can anyone give me some hints how life cycle management is done in BODI?
I want to connect a DB2 database via BODI with a BI. BI comes in 3 tier layer. Would you install 3 BODI server? And if so how do I "transport" the changes from one repository (Development) to another one (Production)?
What is best practice for that?
Unfortunately I didn't find any documents so far.
Your help is very welcome.
Best regards
Michael

This is what I have: https://wiki.sdn.sap.com:443/wiki/pages/viewpage.action?pageId=49414406

Netweaver development life cycle .

Similar Messages

Maybe you are looking for