Netweaver dont update project

Hello,
I have a Webproject written Java running at Netweaver.
The project contains some flashfiles from Xcelsius.
Then problem is, if I change the Flashfiles and then publish it on the Server, Netweaver dont update the flash files.
Best Regards
Sam

jack19855,
It is simply a quick way to update progress for a whole project or just selected tasks, normally to the status date. My personal feeling is that it is of limited usefulness since progress is unique for each and every task and a blanket update may not give
a true representation.
You might find this similar thread also helpful: https://social.technet.microsoft.com/Forums/en-US/01d57ca7-18ea-4bd5-a905-bc755aff982e/update-project-options-for-update-work-as-complete-through?forum=projectserver2010general
Hope this helps.
John

Similar Messages

Cannot See 'Updated' projects in iMovie Library

Recently updated to iMovie 10.01 and then 10.02. Originally had the Updated Projects event and the Finalized Movies Event showing in the iMovie Library, but they are no longer there. I can 'see' them in the finder, looking at the iMovie and the show package contents....
Is there way to get iMovie to 'see' these events again?
PS: more info, this orginated while I was cleaning up some of my events and clips, putting them in the trash. I mistakenly put these in the trash, but hit the undo button and they seemed to reappear. Next opening of iMovie they were gone (but still in the finder as above).

Try to find them in your medialibrary. iMovie folder, your library, right mouse click - "open a contents package"

Problems updating projects to new versions of Premiere (CS5 to CC and CC to CC 2014) Memory consumption during re-index and Offline MPEG Clips in CC 2014

I have 24GB of RAM in my 64 bit Windows 7 system running on RAID 5 with an i7 CPU.
A while ago I updated from Premiere CS5 to CC and then from Premiere CC to CC 2014. I updated all my then current projects to the new version as well.
Most of the projects contained 1080i 25fps (1080x1440 anamorphic) MPEG clips originally imported (captured from HDV tape) from a Sony HDV camera using Premiere CS5 or CC.
Memory consumption during re-indexing.
When updating projects I experienced frequent crashes going from CS5 to CC and later going from CC to CC 2014. Updating projects caused all clips in the project to be re-indexed. The crashes were due to the re-indexing process causing excessive RAM consumption and I had to re-open each project several times before the re-index would eventually complete successfully. This is despite using the setting to limit the RAM consumed by Premiere to much less than the 24GB RAM in my system.
I checked that clips played; there were no errors generated; no clips showed as Offline.
Some Clips now Offline:Importer CC 2014
Now, after some months editing one project I found some of the MPEG clips have been flagged as "Offline: Importer" and will not relink. The error reported is "An error occurred decompressing video or audio".
The same clips play perfectly well in, for example, Windows Media Player.
I still have the earlier Premiere CC and the project file and the clips that CC 2014 importer rejects are still OK in the Premiere CC version of the project.
It seems that the importer in CC 2014 has a bug that causes it to reject MPEG clips with which earlier versions of Premiere had no problem.
It's not the sort of problem expected with a premium product.
After this experience, I will not be updating premiere mid-project ever again.
How can I get these clips into CC 2014? I can't go back to the version of the project in Premiere CC without losing hours of work/edits in Premiere CC 2014.
Any help appreciated. Thanks.

To answer my own question: I could find no answer to this myself and, with there being no replies in this forum, I have resorted to re-capturing the affected HDV tapes from scratch.
Luckily, I still had my HDV camera and the source tapes and had not already used any of the clips that became Offline in Premiere Pro CC 2014.
It seems clear that the MPEG importer in Premiere Pro CC 2014 rejects clips that Premiere Pro CC once accepted. It's a pretty horrible bug that ought to be fixed. Whether Adobe have a workaround or at least know about this issue and are working on it is unknown.
It also seems clear that the clip re-indexing process that occurs when upgrading a project (from CS5 to CC and also from CC to CC 2014) has a bug which causes memory consumption to grow continuously while it runs. I have 24GB RAM in my system and regardless of the amount RAM I allocated to Premiere Pro, it would eventually crash. Fortunately on restarting Premiere Pro and re-loading the project, re-indexing would resume where it left off, and, depending on the size of the project (number of clips to be indexed), after many repeated crashes and restarts re-indexing would eventually complete and the project would be OK after that.
It also seems clear that Adobe support isn't the greatest at recognising and responding when there are technical issues, publishing "known issues" (I could find no Adobe reference to either of these issues) or publishing workarounds. I logged the re-index issue as a bug and had zero response. Surely I am not the only one who has experienced these particular issues?
This is very poor support for what is supposed to be a premium product.
Lesson learned: I won't be upgrading Premiere again mid project after these experiences.

Adobe Content Viewer in iPad dont update the contents on mi Folio Builder! Help!

Please, someone have de same problem?!
When i update my folio through the Folio Builder in Indesign 5.5, the Content Viewer in iPad dont update de folio.
In Acrobat.com i see the contents update, but in iPad/Adobe Content Viewer not.
Why this problem happens?
Tanks.

As I wrote on another thread (and this was directed at Adobe employees)
"I have been closely monitoring many threads here at DPS (and DPS Private Beta Forums) in the last few weeks, and yes I am new to this particular product group having only been in it since March. But I wonder if there is some way that Adobe can be made aware of how serious this issue is with Builder and Viewer and tools "not lining up" with Apple.
"To keep putting this problem on Apple is somewhat of a shopworn technique (and I say this with all due respect.). Still, Apple commands fully 80+ % of the tablet market. They are the big dog.
"Suggestions for the future: Perhaps there will be a way to choose a tools/viewers workflow at startup -- or to put a bigger "red flag" before installing any update that is not yet supported by Apple. Approaching this from the engineering side, you may have forgotten just how many disclaimer screens the average designer/production person faces every week! Many of us don't read them carefully. (Richard Dreyfuss reads them).
"I have nothing but admiration for what Adobe software engineers are trying to do -- and these are nascent times to be sure. But it certainly seems like this launch is going poorly.
-- Jeff

Bug in 10.1: Updating projects from a folder tree

There's a bug when updating projects that are organized in a tree of folders under Final Cut Projects.
I had a bunch of projects organized under a subfolder under Final Cut Projects. After the update to a library, each project appeared under the subfolder under Updated Projects as expected. However, a duplicate of each project also appeared directly in the Updated Projects folder. When I tried to delete either of the duplicated projects, it erased its duplicated partner, leaving no trace of the project.
The only workaround is to make sure that all projects are situated on the same level under Final Cut Projects.

Hi !
I found out where the problem is. On startup Default setting is checked in this is problem. When you uncheck this option, encoding list is not repopulated. So you have force it (by closing Preferences window down and opening it again) and then it works. Coworker of mine disovered this quite accidentally. This should be fixed, by either populating list always, or repopulating list after option is checked. I suppose first option would be better.
Andy

In imovie 10.0.1 while trying to update projects and events in get a box telling me iMovie could not find any projects or events to update

in imovie 10.0.1 while trying to update projects and events i get a box telling me that imovie could not find any projects or events to update. Help, please.

Do you have Projects and Events form an earlier version of iMovie?
Matt

What is the 'Updated Projects' folder in iMovie 10?

I installed iMovie 13 and I'm totally confused by the new layout. Specifically, it's not clear to me what happened to my projects and events.
I see three top levels in the sidebar:
*All Events: This seems to show all my imported events.
*All Projects: This seems to show all my improved projects. So far so good.
*iMovie Library: This seems to contain all my imported events (how is this different from the All Events?). It also contains a folder called 'Updated Projects', an event which contains all my imported projects (why are my projects in an event?? And how is this different from the 'All Projects' view?)
The old layout was so simple - Events and Projects. The new layout is utterly confusing. Any help would be appreciated.

I really find what they've done to be very confusing. Even if you don't compare it to how things used to be in the last version. Why is a movie Project inside an Event? I have 6 Events from a recent vacation. Each location that I visited is logically an Event. It was something that happened in a point in time. I believe that's a reasonable definition of an Event. Now I want to make a "vacation movie" and it wants me to pick which event it's associated with. Well, 6 of them... now what? So I have to create a container Event just to put the movie inside it? That makes no sense to me. I rate this new approach a D-.

New hard drives coming. Update projects now or later?

I want to upgrade to FCP 10.1 (from 10.0.9) at the earliest. I travel and shoot video abroad but return to the US to do major editing. So my current hard drives are small: I have media and backups that I've been moving back and forth between drives. I use three Lacie Little Big Disks (2x1TB 7200rpm; 1x2TB 5400rpm) and a Drobo Mini (2 sets of 4x1TB drives). I've also put all my Camera Archives on a 3TB WD USB 3.0 drive.
I have new desktop drives coming right after Christmas. I am considering upgrading to 10.1 now. I will use Event Manager X to update projects and their associated events one at a time (following the guidance of Philip Hodgetts' article on FCP.co).
My question: Is it advisable to go ahead with the upgrade now and then move libraries to the new drives? (Or would it be better to wait until the new drives arrive?)

May as well do it now. You can move the libraries at will whenever you want.

How to organize "updated projects"

I have a lot of Imovie 9 projects that were put in the "Updated Projects" folder when importing to imovie 10. They are all sort of in a jumbled mess in that folder. Is there anyway to organize these projects and events into some way using the date they were created? All of these projects seem to have the same date in that Updated projects folder.
My imovie 9 does still exist and everything is organized there but i would like to use imovie 10 from now on if possible.
Thanks so much
Ross

With the fundamental chage in the way stuff is stored in iMovie 10, there is no automatic way to organise but you can move projects and clips between events and you can move events between libraries. You might want to move each of your updated projects into the event it belongs to. You can create as many libraries as you want and can choose to open only those containing projects you are currently working on.
See: http://help.apple.com/imovie/mac/10.0/#mov3fa25bae7
To organize by date you can of course include the date in event and library names. Within events clips appear according to their timestamp and you can choose to group clips by date within an event. (View - Show Separate Days in Events).
Its a very flexible system but a bit of a pain for people who have a lot of stuff organized the 'old' way.
Note: Some people are reporting problems with wrong timestamps - but AVOID using the Modify - Adjust Clip Date and Time function since there is currently a nasty bug which can cause adjusted clips to disappear.
I hope this helps.
Geoff.
Geoff.

Updated to FCPX 10.1.4 - All projects missing. No "Updated Projects" in events.

Greetings,
I updated OS X from 10.6 to Yosemite, which caused me to update FCPX to 10.1.4 . I selected to update all events and projects. I have no "updated projects" event listed in the library from the volume. What went wrong, and how can I find my projects?
Thanks in advance,
David

This is the screenshot of what the drive looked like before the upgrades (screenshot from Time Machine). It is a seperate drive from the one with the OS and apps. The projects were organized by category, as managed from within FCPX.
Thanks for replying,
David

I am attempting to update from iMovie 9 to iMovie 10. I have many movies with iMovie 9. Yet, on iMovie 10, when I press "update projects and events", it states "iMovie could not find any projects or events to update". What do I do?

I am attempting to update from iMovie 9 to iMovie 10. I have many movies with iMovie 9. Yet, on iMovie 10, when I press "update projects and events", it states "iMovie could not find any projects or events to update". Somehow it doesnt' see all the movies I have on iMovie 9 library. What do I do?

I'm dealing with this same issue. At one point, it did recognize the Update function but then said it could not import the cache.mov and plist files which apparently means that imovie 10 can't see any of these past events. I can't figure it out.

Updated to iMovie version 10.0 Opened it. All my clips and projects were there. Then it crashed. Now no clips no projects. If I try and import them they are dimmed. If I try and 'update projects and events' a dialogue box says no files found.

Have macbook pro 2012, running Maverick. Updated to iMovie version 10.0 Opened it. All my clips and projects were there. Then it crashed. Now no clips no projects. If I try and import them they are dimmed. If I try and 'update projects and events' a dialogue box says no files found.
Have tried restarting computer, no joy. Help!!

The reply from Nerval fixed it. It is very simple and it works.
If you have a lot of Projects and Events, leave the iMovie running for a long time. I had 160G and it took 4hrs. It is doing it in the background so don't shutdown too quick.
Thanks Nerval.

Nokia 5230 dont update to 51.x.002

Hi all,
I have a 5230 and if i try to update to latest software, dont update to 51.x.002.
I use Nokia Suite 3.8.48 > Sofware Update > Refresh or on phone
Menu -> Applications -> SW updates.
More info from Nokia Suite:
Model :5230
Type: RM-588
From phone:
Software version: 50.0.001
Date: 28-04-2011
Personalized version: 50.0.001.315.02
Date of personal version: 22-07-2011
Language set: 05
Model: 5230
Type: RM-588
Last update: not updated.
Buy from Vodafone Romania as new.
Is a chance to get latest software update, and if, HOW?
Solved!
Go to Solution.

The map data for all Symbian phones was not updated since July 2013. You have the latest version.
The HERE team thinks, if you need newer map data, you have to switch to Windows Phone 8 or Android.
To get v3.09 of the map application, you need a Symbian^3 device like a Nokia 700. You have the latest version of Nokia Maps for a Nokia 5230. Even with the latest firmware-version for your hardware-type (RM-588) which is not available for your firmware-variant (0597862), there would be no newer map application.
Do you face any concrete issues with Nokia Maps?

Is it possible to update projects and events after initial upgrade to 10.1.1 ?

I just upgraded to FCPX 10.1.1 When I pressed the button ''UPDATE ALL'' one of my exterior drives was not connected. FCPX did not update projects and events on it. Is there a way to do it ?

Hey Marc.
You already said that.
I asked you to post a screen shot of the locate dialog. It''s the one that appears after the one on the screeshot that Tom just posted.
Russ

Updating project document from file.

Hi community,
I need to create a functionality using C# to update opened Project Professional 2013 Document.
I have an open document with some project.
At some moment the project file was changed by third party program.
Those changes need to be displayed in the opened document. How can I update Active Project document programmatically to see changes made to the project file?
Thank you,
Ross

For this purposes I can use function OpenFile.
Doing that action there is a dialog window "Import wizzard" appears with several options - how to import. Could you please tell me how can I
suppress "Import wizzard" and
import updated project with "A new project" option (from wizzard).
Thank you.

Netweaver dont update project

Similar Messages

Maybe you are looking for