Netweaver EHP2 without ERP EHP5

Hi all,
I am planning to upgrade my ECC6.0 system, but only to Netweaver EHP2 without upgrading to ERP EHP5. Is that possible/recommended?
The reason is that we are only interested in the BRF plus capability, and not the rest of the EHP5 options.

Hi Gordon,
The is not possible unfortunately.
However, there are customers that install BRFplus on another server in their landscape and connect it with ERP. By this way they do not need to upgrade ERP. We are currently adding capabilities to support this connection out of the box in a way that BRFplus can "see" data and metadata from the connected system (ERP) and deploy the code into the connected system (ERP) for local rules execution.
BR,
Carsten

Similar Messages

  • Solution Manager - Logical Component for SAP Netweaver EHP2

    Hello,
    I installed the newest SAP Netweaver Ehp2 (with usage type AS ABAP only) for a future integrating with BI_CONT (SAP BI requirement). So... what I want to know is... I want to do an update of support packages to the latest Stack (SPS) and in this product version (NW EHP2) the latest stack is stack 06 !! But I ´m facing with a problem which is, because I have to maintain this system in Solution Manager (for Maintenance Optimizer activity)...so what I want is configure this new system on Solution Manager Ehp1 (with SPS 23) but in tcode SMSY I didn´t found this Product in Logical Components for I can apply this system to my Solution... I only see SAP Netweaver with EHP1 and not with EHP2 which is the version that I want to apply this new system. (This is mandatory task, because without it, I will not be able to download the support packages for NW 7.0 EHP2)
    Tell me two things... first if this level version of Solution Manager that I have here (SPS 23) have this product in logical components, and two... if not it, is necessary to raise the level of Solution Manager support packages (to latest stack SPS 25) for I can see that logical component SAP Netweaver EHP2?!
    Thank you very much
    João Dimas - Portugal

    Hi João,
    You can verify if the EHP2 is available (if) in your system, this can be done once you are in SMSY -> Product Definitions -> SAP Netweaver where you should able to see the EHP2. If so, then it's a matter of marking the leading Product & Product Version under the Header Data ->Change Product Assignment where you can use the drop down arrow to select the Product and Product Version. If it's not available, then by checking the 'Free Product / Select Product Version' then use the drop down arrow to select the product & Product Version, once you selected that then click on copy and mark that as active and save.
    Then you need to create a new logical component in System Group & logical Component under SAP Netweaver, then assign the system to the logical component. Once this is done you can use the logical component in a solution and create a maintenance transaction.
    I hope this help you to proceed further, thanks.
    Jay Soma.

  • ERP EHP5 Cluster installation

    Hi ,
    We are going to install ERP ehp5 on windows machine with clustered installation ( fail over). I have a doubt on disk partitions.
    Database : DB2 9.7 FP3
    OS : 2008 SERVER
    Configuration : We are using 2 nodes each node avialabe system attached hard disk 145 gb
                              DISK Space available in SAN 1200 gb
    How to partition  for cluster installation on the above configuration.
    Thanks,
    Siva

    Dear Siva.
    You will find a clear explanation on this in chapter 8 of the installation guide specific for your SAP release and platform (chapter "High Availability with Microsoft Cluster Service" ).
    In particular, for the "SAP NetWeaver 7.0 ABAP+Java including Enhancement Package 2 on Windows: IBM DB2 for Linux, UNIX, and Windows" installation guide, you will find the response in section 8.2.2: "Distribution of SAP System Components to Disks for MSCS" ( page 164 of the guide).
    Cheers!
    --Jesú

  • Can we install SAP Netweaver 2004s, without installing ABAP engine on AIX?

    Hi,
    Can we install SAP Netweaver 2004s, without installing ABAP engine on AIX?
    Thanks

    Hi
    Yes you can install java engine.Run sapinst from installation master cd and select only java engine installation.There will be check boxes abd you have to choose java engine.Also check the nwo4s installation guide.It will guide you throughly.Keep in mind to use correct jdk required for your kind of installatiom.
    Reward points if useful

  • Support Package Stack NetWeaver vs. ERP

    When I use Maintenance Optimizer to get the latest Support Package Stack (13) from my ERP system (ECC 6.0), it does not get the latest kernel and Basis support packages.  After applying, the Early Watch report still shows the kernel is out of date.  However, if I go through Service Marketplace and get the latest NetWeaver Stack (16), it gets the latest kernel and Basis package.  After applying, Early Watch states that the Kernel is up to date.  How should the support package stacks for an ECC 6.0 system be applied - both ERP and NetWeaver stacks or ERP stack only which is not the latest?

    Hi,
    Its Your requirement, So its better you should opt it for.
    Mostly the ecc6 would contain all the components even like sap_hr and others,
    but your nw stack doesn't have this.
    Also you have to select the kernal like you have to make the appropriate settings in the selection page
    which will get you the kernal files in the stack.
    Regards,
    Vamshi.

  • SAP NetWeaver and SAP ERP Central Component 6.0 installed or not,how to fin

    Hello Friends,
      I would like to know that in my system whether
    <b>     SAP NetWeaver  and SAP ERP Central Component 6.0</b>
      Installed or not?How to check whether these are installed or not?
    and where can i Find in the system?
    Regards
    Preethi

    Kinldy make  clear cut query before you look for an answer to that!
    To check for the WAS-J2EE Stack installation - kindly use the following link to access your WAS j22 Start page "http://hostname:5XX00" where XX will be the System No. for SAP System.
    Incase if you want to find out that you have a EP installed: goto:-
    "http://hostname:5XX00/irj"
    For XI , you can go to "http://hostname:5XX00/rep"
    Incase the links work properly the software component is installed.
    PREREQUISITE for the above CHECKS:
      1) The system number should be correct.
      2) The Fully qualified domain name should be used for the hostname.
      3) The Software components and the J2EE Stack should be operational.
    (ON the SAP SERVER)On OS level --> you can Go and have a look for the following directories existence --->
      1)  usr/sap/SID/DV*.../j2ee,
      2) usr/sap/SID/DV*.../SDM
    This means that you have atleast the Java Stack installed on your SAP Server.
    Next in the task manager(WINDOWS) / process level(UNIX) you can check if you have process "jlaunch process under the sidadm owner".
    In SAP Frontend-GUI :
    You can login and go to T-Code ST11 and check for the log files
    dev_disp, dev_dispatcher, dev_server0, dev_jcontrol, dev_bootstrapID.......,
    these file will give you info regarding the J2ee stack and its components....
    Hope this helps you...
    Regards,
    Prem

  • How to restart the Netweaver Server without restarting the whole OS (Suse)

    We are setting up the SAP Netweaver Java on Suse Linux Trial in VMWare.
    We require to restart the Netweaver Server several times. Is there a possibilty to restart the Netweaver Server without restarting the whole Suse Linux Server Operating System?

    Hello Deniz,
    startsap and stopsap have the folllowing syntax :
    startsap [db|r3|j2ee|all|check] [<instance>]
    you could use startsap/stopsap to start/stop any of the db or r3 or j2ee or any particular instance.
    e.g.
    startup db
    startsap r3
    startsap j2ee (just j2ee part)
    similarly for stopsap
    if you have multiple instance you could use the instance ABC as
    startsap ABC
    If you just want to restart any particular process of j2ee engine, you could use jcmon.
    Hope that helps.
    Snehal

  • ERP - EHP5 upgrade - error in phase Preprocessing - MAIN_SHDRUN/DDIC_UPG

    Dear SAP,
    I have started my upgrade from ERP EHP4 to EHP5.
    During phase PreProcessing - the phase MAIN_SHDRUN/DDIC_UPG fails for the following reason :
    In TP.SAV, I have this error :
    ERRORS: Highest tp internal error was: 0232
    TRACE-INFO: 32:  [     dev trc,00000]     OCIServerAttach(OCI_DEFAULT) failed with SQL error 12537:                       58  0.045050
    TRACE-INFO: 35:  [    dbsloci.,00000]  *** ERROR => CONNECT failed with sql error '12537'                                 32  0.045096
    TRACE-INFO: 36:  [     dev trc,00000]     set_ocica() -> SQL error code 12537                                             15  0.045111
    TRACE-INFO: 38:  [     dev trc,00000]     OCIErrorGet -> SQL error code: 12537                                            51  0.045175
    TRACE-INFO: 41:  [     dev trc,00000]  SAPUSER or connect error 99=DBSL_ERR_DB, oerr=12537.                               28  0.045221
    TRACE-INFO: 43:  [    dblink  ,00000]  ***LOG BY2=>sql error 12537  performing CON                                        60  0.045304
    ERRORS: Highest tp internal error was: 0232
    I have already changed the R3trans and tp executable.
    Any help is very welcome.
    Best regards
    SAP NetWeaver Admin

    Hi,
    The phase is stopped with the following error
    ERROR => CONNECT failed with sql error '12537'
    SAPUSER or connect error 99=DBSL_ERR_DB, oerr=12537.
    ***LOG BY2=>sql error 12537  performing CON
    ***LOG BY0=>ORA-12537: TNS:connection closed
    1AETW000 ===> HALT: reconnect to DB failed Please contact the SAP support.
    4 ETW000 End of Transport (0016)
    This issue is caused by misconfigured parameters for Oracle. The main
    ones are the parameters: PROCESSES and SESSIONS.
    Please check SAPnote # 1431798 and correct/increase the parameters.
    then repeat the phase to proceed further with the upgrade.
    Thank You.
    Regards,
    Deepika

  • Netweaver EhP2 SP9

    Hello,
    we upgraded Netweaver to EhP2 SP9,
    and now trying to install WEBCUIF 701 using SAINT.
    We get the error :
    Conflicts Between Add-On WEBCUIF 701 and other components
    Component    Release      Add-On Piece List      Information on
                                                     Conflict Resolution
    SAP_ABA      702         
    SAPK-701DDINSAPABA     Unresolvable
                              SAPK-701DFINSAPABA     Unresolvable
                              SAPK-701DKINSAPABA     Unresolvable
                              SAPK-701DMINSAPABA     Unresolvable
                              SAPK-701DOINSAPABA     Unresolvable
                              SAPK-701DRINSAPABA     Unresolvable
                              SAPK-701DWINSAPABA     Unresolvable
                              SAPK-701DZINSAPABA     Unresolvable
    Idem with WEBCUIF 700
    Are we using the wrong WEBCUIF version ?
    Or is there a problem with SP9 ?
    Thanks a lot,
    A.Bonnet

    Hi Holger,
    our configuration is :
    Netweaver 7.0 + EhP1 + EhP2 SP9
    on MaxDB 7.8
    Now we have :
    SAP_ABA     702     0009     SAPKA70209     Cross-Application Component
    SAP_BASIS     702     0009     SAPKB70209     SAP Basis Component
    PI_BASIS     702     0009     SAPK-70209INPIBASIS     Basis Plug-In
    SAP_BW     702     0009     SAPKW70209     SAP Business Warehouse
    BI_CONT     705     0001     SAPK-70501INBICONT     Business Intelligence Content
    CPMBPC     750     0009     SAPK-75009INCPMBPC     CPM Business Planning and Consolidation
    We put SAPK-700IHINWEBCUIF in SAINT queue and started the import using the password of the sap note 1162091.
    Then we get :
    Conflicts Between Add-On WEBCUIF 700 and other components
    Component    Release      Add-On Piece List      Information on
                                                     Conflict Resolution
    SAP_ABA      702          SAPK-701DDINSAPABA     Unresolvable
                              SAPK-701DFINSAPABA     Unresolvable
                              SAPK-701DKINSAPABA     Unresolvable
                              SAPK-701DMINSAPABA     Unresolvable
                              SAPK-701DOINSAPABA     Unresolvable
                              SAPK-701DRINSAPABA     Unresolvable
                              SAPK-701DWINSAPABA     Unresolvable
                              SAPK-701DZINSAPABA     Unresolvable
    What we have different is MaxDB / SQL, and BI content 705 and BPC.
    Regards,
    Alexandre

  • Upgrade to ERP EhP5 fails in phase RUN_GENPUTTBSHD

    Hi
    We are updating en ERP 604 to 605.
    Phase RUN_GENPUTTBSHD fails during schedule of a batch job.
    A dump is generated with this text:
    Runtime Errors         GEN_PROGRAM_NOT_EXISTS
    Short text:      Program "PUTTB_SHD" does not exist.
    The program could be running from the shadow instance, but from what I can see a shadow instance has not yet been created yet.
    Output from logfiles has been inserted below.
    Anyone facing this kind of error? I have seen at least one similar issue but no solution provided.
    Thanks
    Brgds Tom
    SAPEHPICONSOLE.LOG:
    >> 2011/06/08 11:58:59  START OF PHASE PREP_IMPORT/SUBMOD_TOOLIMPORT_POST/RUN_GENPUTTBSHD
    Starting of PUTTB_SHD generation in batch (job RS_GENERATE_PUTTB_SHD)
    RSPTBINI.LOG:
    1 ETQ201 Entering upgrade-phase "RUN_GENPUTTBSHD" ("20110608115859")
    4 ETQ399 Set environment for standard connect:
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_mss_schema=ed1
    4 ETQ399   auth_shadow_upgrade=0
    1 ETQ206 Executing pre-phase DB specific actions.
    1 ETQ200 Executing actual phase 'PREP_IMPORT/RUN_GENPUTTBSHD'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = 'RS_GENERATE_PUTTB_SHD'
    2 ETQ399 Arg[1] = 'SAP_TMPLOG'
    2 ETQ399 Arg[2] = 'NO-IGNORE'
    2 ETQ399 Arg[3] = 'RS_GENERATE_PUTTB_SHD\.$(SAPSID)'
    2 ETQ399 Arg[4] = '5'
    2 ETQ399 Arg[5] = 'PUTTB_SHD generation'
    2 ETQ399 Arg[6] = 'RSPTBINI.ELG'
    4 ETQ010 Date & Time: 20110608115859 
    4 ETQ265 Starting report "RS_GENERATE_PUTTB_SHD" with variant "SAP_TMPLOG" in batch
    4 ETQ359 RFC Login to: System="ED1", Nr="00", GwHost="bas01", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
    2WETQ360 RFC of "SUBST_START_REPORT_IN_BATCH" failed:
    2WETQ361 code/exception  : BATCH_SCHEDULING_FAILED
    4 ETQ359 RFC Login to: System="ED1", Nr="00", GwHost="bas01", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    2EETQ360 RFC of "SUBST_START_REPORT_IN_BATCH" failed:
    2EETQ361 code/exception  : BATCH_SCHEDULING_FAILED
    2EETQ362 key             : BATCH_SCHEDULING_FAILED
    2EETQ364 message         :
    2EETQ399 EXCEPTION BATCH_SCHEDULING_FAILED RAISED
    4 ETQ359 RFC Login to: System="ED1", Nr="00", GwHost="bas01", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    2EETG894 Exception "BATCH_SCHEDULING_FAILED" raised, write variant failed with error code -1
    2EETG890 Exception "BATCH_SCHEDULING_FAILED" raised, job scheduling failed with error code -1
    2EETQ261 Start of batchjob "RS_GENERATE_PUTTB_SHD" failed
    1 ETQ207 Executing post-phase DB specific actions.
    4 ETQ010 Date & Time: 20110608120854 
    BATCHCHK_IMP.LOG:
    1 ETQ201 Entering upgrade-phase "BATCHCHK_IMP" ("20110608084941")
    4 ETQ399 Set environment for standard connect:
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_mss_schema=ed1
    4 ETQ399   auth_shadow_upgrade=0
    1 ETQ206 Executing pre-phase DB specific actions.
    1 ETQ200 Executing actual phase 'PREP_IMPORT/BATCHCHK_IMP'.
    4 ETQ260 Starting batchjob "RDDIT008"
    4 ETQ010 Date & Time: 20110608084941 
    4 ETQ260 Starting batchjob "RDDIT008"
    4 ETQ230 Starting RFC Login to: System = "ED1", GwHost = "bas01", GwService = "sapgw00"
    4 ETQ359 RFC Login to: System="ED1", Nr="00", GwHost="bas01", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
    4 ETQ399 JOBNAME='RDDIT008', REPNAME='RDDIT008', VARNAME='', BATCHHOST='bas01', IV_SCHEDEVER=' '
    4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
    4 ETQ399 Returned JOBCOUNT='08494100'
    4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
    4 ETQ010 Date & Time: 20110608084946 
    4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    4 ETQ263 Batchjob "RDDIT008" finished successfully
    1 ETQ207 Executing post-phase DB specific actions.
    4 ETQ010 Date & Time: 20110608084946 
    SAPEHPICHK.LOG:
    CURRENTPHASE PREP_IMPORT/SUBMOD_TOOLIMPORT_POST/RUN_GENPUTTBSHD
    ...started at 20110608103533
    Using phase log file 'RSPTBINI.LOG'.
    ...begin dialogue at 20110608103534
    ...end dialogue at 20110608103537
    ..finished at 20110608103537 with status CALLING PUTTB_SHD generation FAILED.
    Error message set: 'RFC call to SUBST_START_REPORT_IN_BATCH failed with key BATCH_SCHEDULING_FAILED (BATCH_SCHEDULING_FAILED): EXCEPTION BATCH_SCHEDULING_FAILED RAISED'
    ...begin dialogue at 20110608103538

    Hi
    SAP got back with this info:
    This error is caused due to the report RS_GENERATE_PUTTB_SHD being deleted druing the upgrade.
    This is a recently discovered problem with the SAPehpi patch 81.
    and the issue is fixed with the lateset version of SAPehpi.
    It will import the report RS_GENERATE_PUTTB_SHD during TOOLIMPORT.
    To use this version, you have to reset the current EHPI run and start from scratch with the new version
    New version (83) downloaded, reset prepare and the phase was now completed
    Thanks,
    Tom

  • NetWeaver Portal and ERP 6.0: BI, ESS/MSS and full Portal on one machine

    Hello,
    with ERP 6.0 you need a EP Core Portal for BI Java. An other EP Core Portal for HCM ECC/MSS. The iViews from this portal you integrate in the main portal via federated portal. But in this scenario i need to much portals and have a lot of maintenance costs (administration overhead for evry portal). For a small Customer i will build one Portal for all. It is possible e.g. to use the BI Portal with ESS/MSS and as full portal?
    Best regards,
    Patrick

    Hi,
    So you would like one BI installation with both the ABAP and the Java-stack with the full BI-functionallity and additionally the XSS-component and set it up to work against the ECC ABAP-only system ?
    I think the scenario would actually work, but:
    1) You might get future problems if you want to upgrade your BI-system and not the ECC-system.
    Is it possible to run the old XSS-components in the new java-stack ?
    2) You might get future problems if you want to upgrade your ECC-system and not the BI-system.
    What if the new version of the XSS-component demands certain java-components which the BI-system do not have.
    So my recommendation is still to run the java-stack on both systems.
    ECC with the XSS-java-components and BI with the Bi-java-components.
    This way you do not lock yourself into a corner and each system can be upgrade independent of the other.

  • Run a Crystal Report published on BW from SAP NetWeaver Portal without BOE

    Hi all,
    We need to create a report using Crystal Reports, save it to BW, publish it to SAP NetWeaver Portal, and run it from SAP NetWeaver Portal. We do not want to use BOE here.
    Currently, we are able to save the report on BW.
    With Xcelsius, we have seen that we can directly refer to the dashboard's technical name from SAP NetWeaver Portal. Is similar thing possible using Crystal Reports? If yes, how this can be achieved?
    Regards,
    Dhanesh Aradhye

    take a look here:
    Portal Part 1
    /people/ingo.hilgefort/blog/2010/03/29/sap-businessobjects-enterprise-sap-enterprise-portal--part-1-of-4
    Portal Part 2
    /people/ingo.hilgefort/blog/2010/03/30/sap-businessobjects-enterprise-sap-enterprise-portal-part-2-of-4
    Portal Part 3
    /people/ingo.hilgefort/blog/2010/04/08/sap-businessobjects-enterprise-sap-enterprise-portal--part-3-of-4
    Portal Part 4
    /people/ingo.hilgefort/blog/2010/04/21/sap-businessobjects-enterprise-and-sap-enterprise-portal--part-4-of-4
    but you still need the BusinessObjects Enterprise system as only the BusinessObjects system will actually render the report.
    Ingo

  • Is there SAP Netweaver Administrator in ERP 6.0 EHP4/NW 7.01(ABAP) ?

    Hi all,
    I want to know whether the SAP ERP(ABAP only) has web page for example as in the Solution Manager http://host:port with links to the Web Services Navigator and Web Dynpro Tooles? never met with such a question or just not interested .. And now my boss asking me that, because he saw this web page for abap installation in other company

    Dear Abay Mustafin 
    Can you give more details please ?
    Your SAP system which has product version SAP ERP EHP4/NW 7.01 is a dual stack installation ? (Abap&Java running on same SID?).
    Which OS are you using ?
    NWA is only needed for Java since it contains the administration stuff for Java.
    In Abap you have other transactions used for administration.
    If you have Java you should be able to access the NWA, you can go through the index page of java to reach it as well.
    http://<fqdn>:<port>/index.html or directly http://<fqdn>:<port>/nwa
    For example you have SAP system XX1 with instance number 05 on virtual hostname hostxx1.domain.com with usage type ERP EHP4/NW7.01 (dual stack) then you should be able to access nwa using url http://hostxx1.domain.com:50500/nwa
    Kind regards
    Tom

  • Is it possible to deploy an EAR to a Netweaver AS without restarting the AS

    The application has been designed to use multiple Java Resource bundles that contain various messages and properties that are updated quite often.  The Resource Bundles have been separated into separate SCAs so that they can be deployed separate from other parts of the application.  Is it possible to deploy the EARs contained within these SCAs without restarting the Java AS?
    We are working with NWDI 7.1 deploying to Java 1.5 running on zLinux

    Hi,
    That should be no problem at all. Any machine with or without NI software can use an FTP client to transfer files to and from an RT target such as CompactRIO.
    You should be able to build the executable on the development machine, transfer it via USB drive to another machine and then use FTP software to transfer the file from there. You'll just need the IP address of the target and login information.
    For more information on FTP transfer with or without MAX to RT targets, see the following KB article:
    http://digital.ni.com/public.nsf/allkb/4DCF9D581C491E9F8625711B005FA539?OpenDocument
    I hope this helps, please don't hesitate to reply with more questions on the subject.
    Regards,
    Tom
    Applications Engineering, NI UK

  • NetWeaver 2004 Installation without SAP R/3 System

    Hi,
    Can we install Netweaver 2004 without installing the SAP R/3 System ? If so , where can we get that software as trail version and how long will it work ? Does it contains WAS and J2EE Engine ? Can I Configure NWDS with this WAS and J2EE ?
    Can u please guide me ?
    Thanks,
    Suresh..

    sure,you can only install the nw platform without r/3 erp import;you can download it from sap servervice marketplace,without license ,you can use it 30days

Maybe you are looking for

  • New MP with 2 video cards, how come?

    Hi, I just got my new MP and first off I see 2 graphic cards, I open it up and I have the Radeon X1900 which I ordered as an extra (BTO) in the lowest slot (1), this take up 2 spaces on the rear panel. I also have the NVIDIA standard card in there to

  • Acrobat 9 Pro and Microsoft Access

    I am new to Adobe Pro and was wondering if it is possible to create a form that would have text boxes that a user would fill in and email to a supervisor. Once the supervisor receives the email I would like them to click on a button on the form that

  • Validation in input template

    I need a validation message that when user send the invalid charectore as value to database invalid charectors thru send function a warning message is given that invalid values such as 'ABCD' charecter cannot be send. Currently when invalid charecter

  • How can I upgrade Boot camp 3.0.4 on macbook pro (os x v10.6.8)?

    How can I upgrade Boot camp 3.0.4 on macbook pro (os x v10.6.8)?

  • 10.4.9 Startup Prb. No blue or login screen - gray screen 4 black rectangle

    Hi - I originally posted this in the Tiger forum but other than buying a new computer and updating Tiger to 10.4.11, which is not a current option, there were no suggestions. Hi everyone, Machine Name: PowerMacG3series Machine Model: PowerMac1,1 CPU