Netweaver Sneak Preview ABAP Version installation problem
hi,
I could install to the step Database Insatnce Creation with this error:
ERROR 2015-06-02 23:33:54
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
And in the file XCMDOUT.LOG this such message was found:
> Subprocess starts at 20150602233354
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n Cosinus -d NSP -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : exit
> Subprocess stops at 20150602233354
Error! Connection failed to node Cosinus for database NSP: ERR_USRFAIL: User authorization failed
How can I fix this?
Thanks!
TD
<i>NSP: ERR_USRFAIL</i>
this is because , the previous installation's max db was not removed properly.
if you remember the previously used password for db use the same when specifying the password for superdba, control , etc.
or else, run the uninstaller from the new extract (2004s) and start a fresh installation after that.
Regards
Raja
Similar Messages
-
Error installing SAP Netweaver Sneak Preview ABAP
Hi
I'm getting the following error when I try to install SAP Netweaver Sneak Preview ABAP.
ERROR 2006-04-04 13:51:02
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NPFMntor' does not exist on the 'localhost' host.
ERROR 2006-04-04 13:51:02
FCO-00011 The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
I'm on Windows XP SP2 Profession.
By the way... is this the right forum?
Thanks in AdvanceHi
This is something related to your anti virus software like norton.Please trun off Norton while Installing SAP and also make sure that the Id which you use to install SAP has administrator rights.
Thanks
prince jose -
BW reports (BEx Reports) in Sneak preview ABAP version
Hi All,
Is it possible to display the BW data in BEx reports with help of Tr code RRMX in Sneak preview ABAP trail version.
When i try to run Trcode RRMX system says <b>Please install Excel as viewer.</b>.
Please let me know , how we can display data.
Regards.
HariHi,
May be your SAP GUI, BW components are not installed. Reinstall SAP GUI and select BW checkbox during installation. Also you need to have ur excel macro setting (tools->macro->security) as either low or medium.
check this note: 160995-BEx Analyzer: Excel Add-ins interfere at the start.
If you are in 7.0, you need to unstall your front end and reinstall the 7.0 front end.
You may troubleshoot using below link
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Hope it helps.
Regards,
Srikanth -
SAP NetWeaver Sneak Preview: Database Instance Installation
ERROR 2005-09-04 12:54:31
FSL-02015 Node C:/Documents/DATA does not exist.
I get this error while installing SAP NetWeaver Sneak Preview.
Could anybody help me.
Thanks
Ravi KWelcome to SDN
check out the following thread, hopefully it answers your problem
Cannot install database instance for ABAP version
Regards
Raja -
Problem in Installing Netweaver Sneak Preview Java version
I am doing a full Local installation of the NW04 SP11 Java Sneak Preview.
I have installed J2SDK 1.4.2.09 & the loopback adaptor on MS windows 2000 SP3.
When I ran the installation of the WAS, the installer just stopped at the Step "Load Java Database Content". There is no error message neither did my system hang. But the installer just stays there and nothing happened.
Can someone please guide me through this. It's very frustrating now.
Regds
ThiruHi Thiru,
to which directory have you extracted the files? Give C:\temp a try because there are problems with to long Path names.
Regards
Gregor -
SAP NetWeaver 2004s Java Trial Version installation problem
I am trying to install SAP NetWeaver 2004s Java Trial Version in my windows xp machine.
I have the following error.
Nothing is written in to my E:\usr\sap folder which I have share as saploc and sapmnt.
I read the forum threads on this.
I still do not know how to do this.
Please help
vijay
INFO 2006-12-17 21:23:58
Execute step getSID of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2006-12-17 21:24:01
FJS-00003 TypeError: dir_profile has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 39640: ???)
ERROR 2006-12-17 21:24:01
MUT-03025 Caught ESAPinstException in Modulecall: executing JS script failed.
ERROR 2006-12-17 21:24:01
FCO-00011 The step getSID with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|getSID was executed with status ERROR .Rajat,
Sorry for the delay. I was on vacation.
Which environment variable are you referring to?
JAVA_HOME is set to C:\j2sdk1.4.2_09.
I am using j2sdk1.4.2_09.
Only port changes I tried was
#sapdp01 3201/tcp.
I tried with and without the # .
Both had the same results.
I have given below the last few statememts from the sapinst log file
Any help to solve my problem will be greatly appreciated.
Thanks.
Vijay
INFO 2007-01-02 16:13:25
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath C:/DOCUME1/VIJAYV1/LOCALS1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: ##Tue Jan 02 16:13:25 PST 2007java.runtime.name=Java(TM) 2 Runtime Environment, Standard Editionsun.boot.library.path=C\:
j2sdk1.4.2_09
jre
binjava.vm.version=1.4.2_09-b05java.vm.vendor=Sun Microsystems Inc.java.vendor.url=http\://java.sun.com/path.separator=;java.vm.name=Java HotSpot(TM) Client VMfile.encoding.pkg=sun.iouser.country=USsun.os.patch.level=Service Pack 2java.vm.specification.name=Java Virtual Machine Specificationuser.dir=C\:
Program Files
sapinst_instdir
NW04S
SNEAK_PREVIEW
FULL
INSTALLjava.runtime.version=1.4.2_09-b05java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironmentjava.endorsed.dirs=C\:
j2sdk1.4.2_09
jre
lib
endorsedos.arch=x86java.io.tmpdir=C\:
DOCUME1
VIJAYV1
LOCALS1
Temp
line.separator=\r\njava.vm.specification.vendor=Sun Microsystems Inc.user.variant=os.name=Windows XPsun.java2d.fontpath=java.library.path=C\:
j2sdk1.4.2_09
bin;.;C\:
WINDOWS
system32;C\:
WINDOWS;e\:
sapdb
programs
bin;e\:
sapdb
programs
pgm;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
classic;f\:
oracle
product
10gDSHome
jdk
jre
bin;f\:
oracle
product
10gDSHome
jdk
jre
bin
client;f\:
oracle
product
10gDSHome
jlib;f\:
oracle
product
10gDSHome
bin;f\:
oracle
product
10gDSHome
jre
1.1.8
bin;f\:
oracle
product
10.1.0
Db_1
bin;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin
client;f\:
oracle
product
10.1.0
Db_1
jre
1.4.2
bin;C\:
WINDOWS
system32;C\:
WINDOWS;C\:
WINDOWS
System32
Wbem;C\:
Program Files
Microsoft SQL Server
80
Tools
BINN;C\:
Program Files
Microsoft SQL Server
80
Tools
Binn
;C\:
WINDOWS
Microsoft.NET
Framework
v1.1.4322;F\:
maven
Maven 1.0
bin;C\:
Program Files
QuickTime
QTSystem
;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;C\:
MCC18
mpasm;C\:
MCC18
bin;java.specification.name=Java Platform API Specificationjava.class.version=48.0java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactoryos.version=5.1user.home=C\:
Documents and Settings
vijay vijayakumaruser.timezone=America/Los_Angelesjava.awt.printerjob=sun.awt.windows.WPrinterJobfile.encoding=Cp1252java.specification.version=1.4java.class.path=C\:/DOCUME1/VIJAYV1/LOCALS~1/Temp/sapinst_exe.5432.1167783061/JAR/ins-j2ee.jaruser.name=vijay vijayakumarjava.vm.specification.version=1.0java.home=C\:
j2sdk1.4.2_09
jresun.arch.data.model=32user.language=enjava.specification.vendor=Sun Microsystems Inc.awt.toolkit=sun.awt.windows.WToolkitjava.vm.info=mixed modejava.version=1.4.2_09java.ext.dirs=C\:
j2sdk1.4.2_09
jre
lib
extsun.boot.class.path=C\:
j2sdk1.4.2_09
jre
lib
rt.jar;C\:
j2sdk1.4.2_09
jre
lib
i18n.jar;C\:
j2sdk1.4.2_09
jre
lib
sunrsasign.jar;C\:
j2sdk1.4.2_09
jre
lib
jsse.jar;C\:
j2sdk1.4.2_09
jre
lib
jce.jar;C\:
j2sdk1.4.2_09
jre
lib
charsets.jar;C\:
j2sdk1.4.2_09
jre
classesjava.vendor=Sun Microsystems Inc.file.separator=
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgisun.io.unicode.encoding=UnicodeLittlesun.cpu.endian=littlesun.cpu.isalist=pentium i486 i386
INFO 2007-01-02 16:13:25
Execute step setNWOption of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
INFO 2007-01-02 16:13:26
Execute step collect of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
ERROR 2007-01-02 16:13:28
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-02 16:13:29
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR . -
Sneak Preview Java SP07 Installation problem at step 32
I am trying to install the current version of Java version Sneak Preview SP07.
At step 32 of 32 the system hangs.
I am using windows xp and new hard drive. I have 1.4.2.09 java version.
can anyone advise why this is happening? Your help will be appreciated.Hello ,
I am also facing the same issue but using MaxDb instead of MS Sql ,does it usually take this long or am I missing anything?
Any help would be highly appreciated. -
Netweaver 7.0 Trial Version Installation problem
Hi Gurus!
I'm installing the trial version but got stuck when the wizard ask for the DNS Domain Name for SAP System. I don't know what to enter.
Please Help,
DerickTry the IP address then 127.0.0.0 , perhaps that would help.
regards,
Advait -
Fail to connect GUI to NetWeaver Sneak Preview
Hello,
I have just downloaded SAP NetWeaver Sneak Preview (ABAP).
Installation was completed without any problems.
GUI installation afterwards also did not show any problems. (Local Installation).
However as I tried to logon with the GUI there was the following error message:
"partner not reached (host 127.0.0.1., service sapdp01)
Error No 10061
Error Text WSAECONNREFUSED: Connection Refused
What could be the reason for this? By the way, how do I
1. Start the Application Server? Maybe it was not running, but there are no icons either.
2. How do I uninstall all components, e.g. there was a new windows user defined during installation etc.
Thank you very much for your help!First of all, thank you very much for your helpful advice. I will immediately try to do set up the loopback adapter.
One more question: Is it necessary to start the server / ABAP Engine before logging in with SAP GUI?
Unfortunately I do not see any entries in the Start Menu to start or stop the server.
Thank you again! -
GUI Server Process Error when installing NetWeaver 2004s Sneak Preview ABAP
Hi,
I've downloaded the SAP NetWeaver 2004s Sneak Preview ABAP and tried to install it. As adviced in the Installing guide I installed the SDK first. When starting SAPinst.bat I get pretty soon this error - what can I do to solve this problem:
Thanks for Your help,
Markus
SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
command : "C:\Programme\Java\jdk1.5.0_02\bin\javaw.exe" -cp "C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\instgui.jar;C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200
The process that should run the GUI Server could not be started.
Please make sure that a JDK is installed on this host and that SAPINST_JRE_HOME points to the root
directory of your Java installation. As an alternative you may start the GUI Server on another host
(for details please consult the installation guide).
103 controller.errorStartingGuiWindows 1580
Exit status of child: 1Hi,
I've stored the folders and files into root drive and installed jdk 1.4.2.08 - still the same error messages.
What strikes me:
'command : "C:\Programme\Java\jdk1.5.0_02...'
Why 'jdk1.5.0_02'? My installes version is 1.4.2_08!
I don't know if my environment variables are right. I'm quite a JAVA dummy: I suppose these variables are to be set within the SDK? Which variables should I check (and how)?
Message was edited by: Markus Jarasch -
BW Reports( BEx reports) in Sneak preview ABAP trail version.
Hi All,
Is it possible to display the BW data in BEx reports with help of Tr code RRMX in Sneak preview ABAP trail version.
When i try to run Trcode RRMX system says Please install Excel as viewer..
Please let me know , how we can display data.
Regards.
HariHi,
May be your SAP GUI, BW components are not installed. Reinstall SAP GUI and select BW checkbox during installation. Also you need to have ur excel macro setting (tools->macro->security) as either low or medium.
check this note: 160995-BEx Analyzer: Excel Add-ins interfere at the start.
If you are in 7.0, you need to unstall your front end and reinstall the 7.0 front end.
You may troubleshoot using below link
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Hope it helps.
Regards,
Srikanth -
NetWeaver Sneak Preview 2004s ABAP - Can't logon with German
Hi SDN Members,
yesterday I've installed my copy of NetWeaver Sneak Preview 2004s ABAP. The installation runns smoothly. Licence installation did not worked through transaction SLICENSE. So I logged on as User nspadm and did it on command line. But now to my problem: I can't logon with language "DE". I get the error "Select one of the installed languages". I've checked Transaction SMLT and German looks like English.
Regards
Gregorhello Gregor,
there is the 'zcsa/installed_languages' parameter in the profile (NSP_DVEBMGS00_<hostname>) set to 'E'. If you'd like to run your Sneak Preview in German language you have to remove the parameter from the profile and then restart the system.
regards, Manfred -
Problem in installin SAP Netweaver Sneak Preview
While trying to install the SAP netweaver sneak preview I got this error at the second step of the installation SAP System installation ..
"An error occured while processing service sneak preview edition of SAP web application server java 6.4 install sap web application server java 6.4
you may now
press retry to repeat the current step.
press view log to get more information.
stop the task and continue with it later.
reset your input for the current task .in this case SAPinsti will permenantely remove all installation files from the installation directory. This gives you the oppurtunity to start from scratch."
Can someone kindly guide me as to what to do..
(1)when I pressed retry I again got the same screen.
(2)when I pressed reset and again started from scratch I again got the same error.
(3)the view log shows
ERROR 2005-12-27 11:06:09
CJS-00081 Assertion failed: in function () { var changed = false; var nodeName = (new NetworkMgt()).getServicesFileName(); var mgt = new FileMgt(); var node = mgt.getNode(nodeName, true); ASSERT_DEFINED(arguments.callee, node, "node(" + nodeName + ")"); node.saveVersion(); for (var it = this.getInstances(); !it.isDone(); it.next()) { var instance = it.get(); if (instance.installInstance()) { changed = instance.createPorts() || changed; } } installer.writeInfo("ind-rel.ind-os.ind-db.j2ee-eng.creatingPorts", this.getSID()); if (this.j2eeStandalone) { var port = this.getSCSMSPort(); if (port) { changed = WebAS.createPort("sapms" + this.getSID(), "tcp", port, "# SAP System Message Port", true) || changed; } } if (!changed) { node.revertVersion(); }}Variable node(C:/WINDOWS/system32/drivers/etc/services) should be defined
(4)i have uninstalled the entire sneak preview version including the j2ee engine .
I will be obliged if someone guides me through.
Thanks and Regards.
Sundeep SethiHi,
Try the installation after starting all the services of the DB. For example if you have used Oracle as the underlying DB, make sure that the important Oracle Services like OracleOraHome92Agent, OracleOraHome92TNSListener and OracleServiceJ2E are in Started status.
If some other DB, start its services. To start the services go to start - Settings - control Panel - Administrative Tools - Services.
Regards,
Anup.
Note: If found useful, please contribute points. -
Error while installing Netweaver 04s sneak preview trial version for java
Hi Experts,
I am trying to install SAP netweaver 04s sneak preview trial version for Java in my own desktop. While installing, it is showing the following error
ERROR
CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:Unable to create node
abcd\sapmnt\ with type DIRECTORY: can't create parent node..
ERROR
CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:Unable to create node
abcd\sapmnt\ with type DIRECTORY: can't create parent node..
ERROR
FCO-00011 The step createSystemDirectories with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories was executed with status ERROR .
I gave the database host name as the name of the computer. While installing the 3rd step, the above error is displaying. can anyone guide me how to proceed further.
regards,
vvhow are u trying to install it.....i mean...are the source and the installtion drive on the same PC?
-
Installation Procedure for SAP Netweaver 2004 Trial ABAP Version
Hi,
I am new to ABAP, and want to Install SAP Netweaver 2004 Trial ABAP Version on my system. I downloaded the software from SDN. If any one knows the Installation Preocedure, please send me it will be very helpful for me.
Regards,
Mithun Birabinth.Please check the SMP:
http://service.sap.com/instguides & navigate accordingly.
PS:
Award points if your question is resolved.
Maybe you are looking for
-
Please bear with my poor English... when i add apps to K510a Always show: I used ie & chrome. chrome debug tools show the last post for "add apps to printer " return a ErrorCode "552" I open the page source,find this code: when I add apps,always
-
i want a way or a product that can hide packages body specific Tables ,function and procedure from being viewed,Altered by /,System or sys i will give this privileges to other users temporary and i will back again , it is just a while i hope you h
-
Printing resolutions, trees, resizing components & co
Hi. I've a little problem which grows bigger and bigger every day: I've to print a tree. Sound's easy, hm? That's not all, I have to use a template and there's a place marked where I've to put that tree (can be a component) but I'm not allowed to cha
-
I can not update Elements 11 camera raw 8, , I said that already updated
I see that Photoshop is updated camera raw (to 8), but is camera raw 7.4 elements 11. I bought a new camera and I do not recognize the raw, however comes in the list of camera raw 8. Do I have a problem in my program to update?
-
Firefox does not retain my proxy settings.
Everytime I launch the browser I have to reset the proxy settings in order for it to work. I don't use a proxy but Firefox seems to think I do and assumes that i use some random proxy that it populates. I don't have this issues with other browsers so