Netweaver version on ECC6.0SR2

Hi Gurus,
Installed ECC6.0SR2 ( ABAP + JAVA Stack) on windows2003 with oracle backend, now i want to know which version of netweaver is installed in my system and can i configure mobile infrastructure server on this server.
Thanks..Naveen

NW2004s SR2 is the netweaver version and the components available depend on what usage type you have selected(by checking the usage types checkbox) during the installation.
Vinayak

Similar Messages

How to check Netweaver Version

hi Friends,
I have a doubt as how to determine the Netweaver version,
As i have installed ECC6.0 (i.e. ERP 2005) and its based on Netweaver 2004S
But still how can i find out whether its
SAP NetWeaver 7.1
or
NetWeaver 7.0 (= NetWeaver 2004s),
Waiting for your reply...
Regards
Aayush

Hi Aayush,
indeed for an SAP ECC 6.0 system, there is no easy way to see that it is based on SAP NetWeaver 7.0 (fka SAP NetWeaver 2004s). System -> Status shows you ECC 6.0 (which is a product version). Using the icon for component details, you can see the software component versions. SAP_BASIS 7.0 is the key to know that the system is related to SAP NetWeaver 7.0.
For Java, as Mona already stated, the software components can be found on the system status page:
7.1 based java server: http://<hostname>:<port num>/nwa/sysinfo
7.0 based java server. http://<hostname>:<port num>/sap/monitoring/SystemInfo
Please note that there has already been some threads on this question in this forum, so as always it is worth searching first ...
Regards, Boris

Difference between ECC6.0SR2 and SR3

Hi experts,
Could you please tell me what's the difference between ECC6.0SR2 and SR3?
Is the difference just Support Package level after installation?
And how can I check whether my ECC6.0 is SR2 or SR3?
I checked component version in system status from system memu in SAPGUI.
The component version is "SAP ECC 6.0". I could not get the SR level by
t-cd slicense and SM51.
Thanks,
Tsumas

Is the difference just Support Package level after installation?
Yes
And how can I check whether my ECC6.0 is SR2 or SR3?
Check SP level.
I checked component version in system status from system memu in SAPGUI.
The component version is "SAP ECC 6.0".
Go a step further: Click at the magnifying glass; you will see SP level of SAP_BASIS and others.

Country Version in ECC6.0

Hi,
We are in process of evaluating all SAP Country versions in ECC6.0.
We have gone through SAP solution browser but it did not give much detials.
Where we can get the delta functionality in SAP ECC6.0 from SAP 4.7 Enterprise for country versions.
Thanks in advance.
Best regards,
Jatin

Hi,
First, please review SAP note 602901, which describes, which countries
have country specific versions.
For the countries that there is some Country-Specific Documentation,
it is updated at SAP Help Portal for our standard country versions:
http://help.sap.com, choose Documentation, and select your release
SAP ERP > SAP ERP Central Component:
SAP ERP 6.0
-> English
   -> SAP ERP Central Component
     -> SAP ERP
       -> Cross-Application Functions
        -> Cross-Application Components
         -> Country Versions
Regards,
Aidan

How to do transports in bpc 7.0 netweaver version?

Hi all,
I am new to bpc can anyone pls tell me how to carryout transports in bpc 7.0 netweaver version?
thanks
Pooja

Hi,
Go through following white paper.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b048ecf4-9414-2c10-ceac-fb2492a8016c
hope it helps..
regards,
Raju

BPC Netweaver version - Conversion File Formulas

BPC (Netweaver) Expert,
When creating formulas on the Data Conversion File that is called by the Transformation File, the Formulas are not working on the Netweaver Version. Does anyone have any idea what may not be set up correctly?
Thanks,
Greg Rotvold

Hello Greg,
BPC Netweaver uses somewhat different syntax for conversion formulas, and uses javascript for complex formulas, so formulas written using Visual Basic on the MS version will not work, though the basic *IF logic should work (I think I'm remembering MS conversion formulas correctly, but it's been a while). You can find the relevant Netweaver version documentation here: [http://help.sap.com/saphelp_bpc75_nw/helpdata/en/81/94a8a5febd40268d5c59b4fc31be37/frameset.htm]
If you want help specifically on the Netweaver version I suggest you ask your question in the Netweaver forum. I'm not sure what forum is most appropriate for questions about the differences between the two versions
Ethan

Need replacement for getting windows version in ecc6.0

hi mates ,
FM: get_gui_desktop_info with type = 8. gives the windows version of the system. since get_gui_desktop_info is obsolete in ecc6.0. can anyone help me with the replacement to get the windows version in ecc6.0...... any help will be appreciated.
regards
mano

use the class
CL_GUI_FRONTEND_SERVICES
methods
GET_GUI_PROPERTIES
GET_GUI_VERSION
GET_IP_ADDRESS

Enhancement from 4.6B version to ECC6.0

Hi
My client is going to enhance 4.6B version to ECC6.0 version. I downloaded the delta treatment for the enhancements. In technical update, is entire configuration get transferred in to the new version. I think, the Z programs/ reports need to be taken care specially in the new version. Can you put some light on that? What precautions do we need to take?
MDT is in place in the old version. Now my client is opting Enterprise portal and going for ESS and MSS. When MSS is in place, MDT is still required?
Please advise me.
Best Regards
Roja

Hi KG,
Could you explain the solution?.
Regards,
Vishnu

Migration from BPC Microsoft Version to BPC netweaver Version?

Dear all,
we plan to migrate bpc.
what tools that we use to Migration BPC Microsoft Version to BPC netweaver Version ?
Any suggestion for safety technique?

Hi Tara,
As far as I know there is no automatic method provided by SAP right now to migrate from SAP BPC MS to SAP BPC NW.
Please have in mind that the front end will be the same, but the backend will be different: BW, BADIS and ABAP (In NW) vs SQL, SSIS packages, Stored Procedures and Visual Basic (In MS). Which means that there will not be an easy way to perform this migration in an automatic way.
Hope this helps

NetWeaver version

Dear friends,
I'm confused, how do I know which version of the NetWeaver is used in my system?
On one of the sites I found information that shows how to know the version of the NetWeaver, that used in the system:
The component SAP_AP version = NetWeaver, is it right ???

Hi Albert,
Check the version of components SAP_ABA and SAP_BASIS shows the netweaver version. In case Netweaver products, version is visible in System- status - sap system data - components version like SAP NetWeaver AS ABAP 7.31, in other products above sw components gives the netweaver version.
regards
kartik

Difference between BPC 5.1 Microsoft and BPC 7.0 Netweaver Version

Hello Experts,
We will be migrating our BPC from 5.1 microsoft to SAP Netweaver version. Actually, I dont have any idea on the netweaver version. Can anyone advise the different between the microsoft version and netweaver? Also, can I reuse my reports and script logics in 5.1 to Netweaver? Can I do a migration from 5.1 to the netweaver platform?
Please advise.
Thanks,
Katherine

Hi Katherine,
The main difference is that 5.1 runs on the MS SQL as backend, whereas 7.0 NW has the BI system as the backend. 7.0 NW doesnt have BPFs. In terms of script logics also, lot of keywords from 5.1 are not supported in 7.0 NW.
There is a migration tool available for doing this type of activity. It will take care of most of the objects. However, the BPFs will not be migrated, since 7.0 Nw doesnt support it. The script logics need to be modified. As I said, lot of keywords from 5.1 are no longer supported in 7.0 NW. So, you might need to consider BADIs for complex data manipulations. The reports and input schedules should not have any problems. However, its recommended to run all the templates to verify.
Hope this helps.

How to identify the solman7.1 netweaver version

HI
Can any one guided how to identify the solman7.1 netweaver vesion, bit confusing, i want install some support packs for netweaver in my solman system.
confusing , i want to know my solman 7.1 netweaver version?
regards
vreddy

Hi Vreddy,
Check the version for components like SAP_BASIS , SAP_ABA which are netweaver components.
That will be version of Netweaver for solution manager.
Regards,
Archana

NetWeaver Versions

Hello,
Could you tell me what are all the avilable netweaver versions and service pack versions in the market.
Thank you

Hi,
1) SAP XI 2.0 - May 2003
2) SAP XI 3.0 - Oct 2004
3) SAP XI 3.0 SP13 - July 2005
4) SAP XI 3.0 SP14 - Oct 2005
5) SAP XI 3.0 SP15 - Jan 2006
6) SAP XI 3.0 SP16 - Mar 2006
7) SAP PI 7.0 - 2007
8) SAP PI 7.1 - Second half of year 2008 (Not yet released for customers)
Thanks
VIkranth

Segment Release version issue - ECC6 to older ver.

Hi
Our system was recently upgraded from ECC5 to ECC6 and we are facing an issue with one of the interfaces that is connected directly to the R/3 System.
This issue is realted to an outbound interface and it used to work fine when we were on ECC5. The message we are sending is a bespoke extension based on basic type DELVRY03. The segment E1EDL24 have new fields added to them in the 701 release version compared to the 620 version which was the higest available on ECC5.
I tried reducing the IDOC segment release version to 620 and 46C in the partner profile, but the message received by the thirdparty still contains the new fields which is causing an issue at their end.
I would appreciate if you could provide me some guidanace on how to appraoch this issue.
Thanks & Regards
Praveen

Hello Guy's,
We have recenlyt upgraded our quality system to ECC6.
I am also facing the same issue, As per my unnderstadning if I put segment release in WE20 then in ALE communication Layer Idoc should remove the fileds which are not intended for the given release. For example E1EDP01 is having highest release 008 for 701 release. If I set 40A in partner profile the Idoc should generate with fileds only available in 40A release i.e. version 003,but SAP is filling all thefilds which are available in701 relase.
I don;t understand why SAP has given such a functionality though it actually not filter the data at communication layer!!.
Could you please let me know did any of you really see the difference when you use segment release in WE20 when using PI as receiver? I did sevaral test for MATMAS, ORDERS found this segment release is useless.
If you have applied any workarounds(other then updating receiver system mapping) please let me know. I think is there any modification in ECC6???
Edited by: Naresh Reddy K on Jun 7, 2010 3:30 PM

Upgrading from BPC MS version to Netweaver version 7.5

Hi experts
My client is in the process of implementing the MS version of BPC but have now invested heavily in the Netweaver environment and would like to migrate to the NW version 7.5 of BPC. Please can I get some views on the complexity involved in migration and whether there are any tools available to assist?
Thank you.

Hi,
As a matter of fact, there is a tool for migrating from MS to NW version. I would request you to get in touch with your local SAP RIG team for further information on this. There is a certification required for getting the access to this tool.
This toll will take care of most of the objects. However, there are few manual things to be done. BPFs cannot be migrated. Hence, you need to re-design the BPF in 7.5 NW. Lot of statement in script logic are not supported in the NW version. So, that needs to be re-visited.
Hope this helps.

Netweaver version on ECC6.0SR2

Similar Messages

Maybe you are looking for