NETWEAVER XI Questions
Hello Friends,
I am new to SAP. Recently I trained myself in SAP BW and currently I am training for XI. I am not sure if this is a good combination.
I would like to know how I can combine these skills to get a break in SAP. I am basically a network engineer.
I am not sure if this question is relevant in this forum. However I need some career advice and I appreciate all the help.
Thanks
Hi Gcworthy,
I am Sharing my experience,wih knowledge on ALE/EDI/Workflow/ABAP it is good to move towards SAP XI, SAP XI is very interesting where we get a chance to integrate SAP and Non SAP system, Not only carrer wise Job wise also it will be very interesting there will not be any monotoios job. Basic Java will help a lot in SAP XI,
If you like to get ALE,Partner Profile configuration documents with Screen Print kindly let me know, I am reachable at- Email ID- [email protected]
Have a great career and a cool day.
Thanks & Regards
Agasthuri Doss
Message was edited by: Agasthuri Doss Baladandapani
Similar Messages
-
BPC Netweaver Landscape question
Hi
Technical question:
BPC NW has got two components = A Netweaver server and a Windows server.
Does anyone know if you can run this all the same Windows server? e.g Netweaver is running on the .Net server that you're using for BPC.
Edited by: Wouter van Schalkwyk on May 15, 2009 4:20 AMHi,
In general Netweaver needs 64 bit machine and BPC needs 32 bit machine, so need to have two servers. but with some settings in IIS (mentioned in Install guide) you can make BPC (.net server) work with 64 bit machine. So you can have both Netweaver and BPC in one 64 bit machine.
regards,
Sreedhar -
NetWeaver JavaStack - NetWeaver Upgrade Question
Hello Gurus,
Please ignore I sound little uninitiated in this.
This is about the so called JavaStack upgrade after (?) the technical upgrade.
- What exactly is the so called Javastack in netweaver? It is not same as 'Usage Type' Java? Is this AS Java?
- What is the right time to do the JavaStack Upgrade? After technical upgrade?
- How much after tech upgrade? 2-3 weeks are ok? Will the new features of BI 7 not be available till we upgrade the javastack?
- Without upgrdaing to Javastack, will NONE of the new functionalities be available in BI 7.0?
Please help.
Regards
Manish MadhavIn continuation
To use any web based components, including the 2004s Web Application Designer, Report Designer, or Web Analyzer, you need to have BI-JAVA usage type installed.
You can still use the 2004s BEx Analyzer (Excel) without the BI-JAVA usage type.
When you install BI JAVA, it will have its own EP and AS JAVA usage types under it. You have no option with this as they are required to run BI JAVA (just like you have AS ABAP under the BI usage type).
It is recommended that you have all 4 usage types installed (AS-ABAP, AS-JAVA, EP, and BI-JAVA) as this is required for full functionality. These can be on a single system or can be 2 separate systems:
1 system:
System (AS-ABAP, AS-JAVA, BI-JAVA, EP)
2 systems:
System (AS-ABAP)
System (AS-JAVA, BI-JAVA, EP)
Note 1072576 - Frequently Asked Questions: BI Java Support Packages/patches
Hope it Helps
Chetan
@CP.. -
I have previously used NW 6.4
Is NW 04 thre version that came after 6.4
When did 04 come out
What is the brief history of the associated versions ?SAP NETWEAVER 04 - available from 31.03.2004 -- WAS 6.20 / WAS 6.40
General data
Database Platforms
Application Server ABAP
Application Server Java
Adobe Document Services
Business Intelligence
BI UDI
Enterprise Portal
KW IKS
Mobile Infrastructure (MI)
Process Integration (PI/XI)
J2EE Adapter Engine (PI/XI)
Partner Connect. Kit (PI/XI)
Operating Systems
BI Precalculation
BI Partner
Visual Composer
KW ITS
Content Server
MI Client
Developer Studio
Search and Classif. (TREX)
Job Scheduler
Frontend
Web Browser Platforms
Application Server ABAP
Business Intelligence
Enterprise Portal
KW ITS
Web Browsers
KW IKS
Web Server Platforms
KW ITS
Web Servers
Search and Classif. (TREX)
JEE
Adobe Document Services
Enterprise Portal
J2EE Adapter Engine (PI/XI)
Partner Connect. Kit (PI/XI)
JSE Platforms
Application Server Java
Adobe Document Services
BI UDI
Enterprise Portal
KW IKS
Process Integration (PI/XI)
J2EE Adapter Engine (PI/XI)
J2SE Adapter Engine (PI/XI)
Partner Connect. Kit (PI/XI)
JDBC Databases
Application Server Java
Adobe Document Services
BI UDI
Enterprise Portal
KW IKS
Process Integration (PI/XI)
J2EE Adapter Engine (PI/XI)
Partner Connect. Kit (PI/XI)
SAP NETWEAVER 2004S -
available from 24.10.2005 -- WAS 7.00
General data
Database Platforms
Application Server ABAP
Application Server Java
Adobe Document Services
Business Intelligence
BI Java
Enterprise Portal
Content Server
Mobile Infrastructure (MI)
Development Infrastructure
Developer Workplace
Process Integration (PI/XI)
J2EE Adapter Engine (PI/XI)
Partner Connect. Kit (PI/XI)
Operating Systems
SAP LiveCache
BI Partner
Content Server
MI Client
Developer Workplace
Developer Studio
Search and Classif. (TREX)
Job Scheduler
Frontend
Business Explorer (BI)
Web Browser Platforms
BI Java
Enterprise Portal
Web Servers
Content Server
Search and Classif. (TREX)
JEE
Adobe Document Services
Enterprise Portal
EP Core
JSE Platforms
Application Server Java
Adobe Document Services
BI Java
Enterprise Portal
Development Infrastructure
Process Integration (PI/XI)
J2EE Adapter Engine (PI/XI)
Partner Connect. Kit (PI/XI)
JDBC Databases
Application Server Java
Adobe Document Services
BI Java
Enterprise Portal
Development Infrastructure
Process Integration (PI/XI)
J2EE Adapter Engine (PI/XI)
Partner Connect. Kit (PI/XI)
Regards
Rahul
Please Award points if help is useful ***** -
Hi everybdy,
Does the Netweaver CE have the Abap stack? or it only has the Java stack?
Which are the differences between Netweaver CE and Netweaver?
Thanks and Regards,Hi Fernando,
As you stated there's one central instance with one ore more Java instances which all share one database. Here's a brief architecture overview
http://help.sap.com/saphelp_nwce72/helpdata/en/2e/611724f410254ca12a3f396ec5ae85/content.htm
O. -
How to do Post Install SAP Cryptographic in Netweaver CE 7.1 to enable SSL?
Dear all,
I have install sap netweaver CE7.1 and SSM 7.5.
During installation netweaver CE7.1, i didn't tick install SAP Crytographic Library, and after that NWCE setup, now i want to install Crytographic file that i have download.
here picture during setup nwce: http://i54.tinypic.com/jio0as.png
So how to Install SAP Cryptographic in Netweaver CE 7.1 to enable SSL, without again reinstall NWCE 7.1?
thank for any answers,Chamnap,
Even though NetWeaver CE is a required piece for running Strategy Management, for a specific NetWeaver CE question you need to go to the NetWeaver experts, not SSM.
I suggest that you close this question on this Forum and repost it on the
NetWeaver Security Forum: Security
You might want to take a look through the other NetWeaver Forums - /community [original link is broken]
you can do a search to see if there are any postings that cover the same areas. I am just guessing that the Security Forum would be the best place. After reviewing the choices, you may see a better area.
Please don't repost this question on multiple Forums, as that is a violation of Forum rules.
And please close this question, as you can only have so many questions open at any one time.
Regards,
Bob -
If I am able to Install NetWeaver, does it means I already pay for it?
I was working with business process documentation #132 Reporting with SAP Business Explorer, and it requires the activation of SAP NetWeaver
My question is if I do activate NetWeaver, SAP is going to charge me extra than we are already paying, or if the options are available to activate it in our current installation, does it mean we already pay for it?
Thank you,
CarlosNo is not charged extra, SAP wont charge extra for any configuration already available in your installation.
-
Hi Friends,
Iam very very new to Netweaver technology ........
So can anyone explain me in very basic terms to the following questions ...
1. What is Netweaver ?
2. What is the difference bet NW 2004 and NW2004s?
3. Is it mandatory to know JAVA language to sustain with NW technologies? or ABAP itself is enough ?
4. If JAVA is essential ...where to start with ?
Hmm .... yeah these are the questions as of now
Expecting responses ...
Cheers
Kripa Rangachari .....
I dont know where to post the Netweaver general questions ;(Hi Kripa,
1. What is Netweaver ?
Click Here: <a href="http://www.thespot4sap.com/Articles/SAP_Netweaver_Introduction.asp">Netweaver: An Introduction</a>
<a href="http://www.sap.com/platform/netweaver/index.epx">http://www.sap.com/platform/netweaver/index.epx</a>
2. What is the difference bet NW 2004 and NW2004s?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/devguide2004">SAP NetWeaver 2004 Edition</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/devguide2004s">SAP NetWeaver 2004s Edition</a>
3. Is it mandatory to know JAVA language to sustain with NW technologies? or ABAP itself is enough ?
Its all depend in which stack you want to fit. If you want to go into EP, then JAVA is must. In XI having knowledge of JAVA will be highly useful and in other Netweaver stack it will be an added advantage. Anyhow ABAP is not enough to sustain with NW technologies.
<a href="http://www.sap.com/platform/netweaver/standardssupport/java.epx">Netweaver and JAVA</a>
4. If JAVA is essential ...where to start with ?
Core JAVA, J2EE in full is needed for Netweaver. As where to start is concern you can start with core JAVA and consequencely go thorugh J2EE.
I hope this will help you out.
Regards,
Subhasha Ranjan -
Difference Between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)
Dear All,
Could you please list out the differences between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)?
Thanks,
Rahul BhatHi Rahul,
These threads can give you some insight:
What's it gonna be: NW2004S?
NW2004 vs. NW2004s
Need help on Netweaver 2004 and Netweaver 2004s
/thread/196931 [original link is broken]
difference between 2004 and 2004s?
NetWeaver version question
Bye
Ankur -
Dear experts,
I have used functionmodule as RFCs to fetch data from SAP
using java/jco.Here i realised that all work has to be done in sap itself.Java is just a platform to fetch that object and show me the data.
However i wish to know can i use native java platform itself
ie only jdk installalation with jco to write reports and fetch output just as i work in se38.
Is there any separate java library for this where i can use joins ,pass querys just as i do in normal abap.
Am i close to netweaver ,these questions are alway budding in my mind
Regards,
Aditya SharmaThis is an area that I've gone changed my view on over the years.
When Netweaver was first introduced with it's dual stack (ABAP and Java) I was frustraited that you couldn't access the ABAP DB Schema from the Java side of the stack. The architecture (which you can get aroudn if you really want to, but I wouldn't reccommend it) forces you to use either RFCs or WebService calls to access data on the ABAP stack from the Java stack.
As time has gone on though I have realized that this is actually a good setup from an architecture perspective because it forces you into a seperation of concerns where your ABAP modules are implimenting a buisenss object layer around the data in the ERP system. Additionally if you are building a composite application that combines SAP functionality with that of services provided by other applications then this actaully keeps some architectural purity to it becuase the SAP ABAP system is treated the same as any other system that it is utilizing.
So my recomendation would be to stick with service calls accross the stacks and not direct DB access. In the end you'll have applications that are architected better.
~Ian -
WRITE_BACK BADI for Parent Level Data Save
Hi Experts,
I am using write back badi for Parent level data saving in BPC 10, but my requirement is to save data at parent level for time period 2007.Q1 without segregating at corresponding base members level.
Is it possible so? if yes , please suggest.
I will highly appreciate for your quick response.
Regards,
Dipesh MudrasHi Dipesh,
BPC NetWeaver related questions should be posted in the corresponding forum, cf.
SAP Planning and Consolidation, version for SAP NetWeaver
Regards,
Gregor -
I have been having some serious problems trying to get a connection to SAP from the SAPNetweaver. I have done some research, but nothing solved my problem. There are a lot of different notes out there, but no simple explanation on how to get it to work.
I would like this Message to be the "End All" for questions regarding SAP connections and I hope all of you can help. "No Links", man am I tired of trying to follow the secondary links. Just full explanations. No links to the SAP Developers Manual, every description was just short of having enough information.
PLEASE HELP.
Here is the scenario:
I have applications that require connections to SAP BAPIs. I want the people that are accessing these applications to run the BAPIs with there own credentials. I have the SAP Netweaver installed, but am using an older SAP EIS. I was using Tomcat with the JCO classes. I had to create a different connection for each call, but was able to pass the users credentials from a login page that I created. Now I am porting the application to Netweaver.
Questions:
1) What is SAPs preferred connection to BAPIs if I want to pass the credentials of the user to run the BAPIs?
JCO, JRA, Other?sapjcorfc.dll already loaded in another classloader
I don't know if this is 100% accurate statement, but here it is anyway.
The error above came from me including the JCO.jar within my application as an "External JAR". When I referenced it only, then I was able to use the JCO classes as I did when I was using TOMCAT.
To add to the post above, I ust wanted to give a step by step on adding the reference to JCO.jar to your application so that you can program using it, but not having it be added to your application JAR.
Prerequisites:
1) Web Module Created
Steps:
1) Right click on Web Module and select "Properties"
2) Within the "Java Build Path" selection on the left side, Choose the "Library" tab.
3) Click the "Add Variable" button.
4) Click the "WD_RUNTIME" folder once and then click on the "Extend" button.
5) Expand the following directories:
->com.sap.mw.jco
->lib
6) Select the sapjco.jar and click on the "OK" button. -
Urgent: Implement Workflow with BPM
Dear Guru,
Currently using SAP R/3 V4.7, we are going to implement SAP Business Workflow (and integrates with external applications including Email) together with SAP Netweaver.
Question:
Do I need to implement BPM Engine and SAP XI as part of the project? Please give me a clear explanation regard this matter. Which version of application would you recommend. Thank you very much.
Best Regard,Hi Naveen,
Thank you for your answer. Therefore, only SAP Business Workflow is enough for getting my job done, isn't it? However, if I need more integration, apart from email, with external systems such as customer and partner systems, I must run SAP XI and BPM engine. Do my understanding is correct from your answer? So, what is the main purpose of BPM engine related to SAP Business Workflow? Thank you very much.
Best Regards, -
Iview Height and vertical scroll
Hello,
EP 6. NetWeaver 4 question.
We have several iviews on a page. They are simple Dynpage with beans/JSP rendering HTML. We would like to limit the Height of each Iview and then have a vertical scroll bar automatically appear to allow the user to scroll the the iview.
Had no trouble doing this in EP5. Nothing we try seems to work in EP6.
Any ideas?
Gary Hill
E.B. Developer
Lamson&SessionsHi Gary
What is your page setting for the Iviews is it fixed or full page or Automatic.
Select the Iview as fixed and set some value and preview the same in the Page. In the page only you will be able to see the iView size.
Regards
Senthil
Message was edited by: Senthil Boomi -
Sample questions on SAP NetWeaver-Web Application Develpment certification
hello frnds,
can i find any sample questions on
<i><b>SAP NetWeaver-Web Application Develpment - JAVA</b></i> certification?
what are the books/material should i follow for the same ?
Thank you,
Regards,
Shobhanhi Sobhan
Please try on
braincert.com
Farook
Maybe you are looking for
-
I have searched all the ways I know about this. I have FF V28 on my PC. I downloaded FF v 28.0.1 and I cannot get the 3 bar / dot menu on my Note 10.1-2014 tablet. All your support notes describe the possibility of using my Home button, main button a
-
Wireless network with 2 computers and an HP J4680 printer with Connection problem
I have two computers. Each of them has been connected to the HP Officejet J4680. I can "ping" the printer from both computers and get a response. I can print documents to the printer from one computer (A), but not the other (B). Each computer is
-
Can I revert back to lion after mountain lion download
can I revert back to lion after mountain lion download
-
Is Powerbeats 2 compatible with Apple TV?
Is Powerbeats 2 compatible with Apple TV?
-
How can i change zz-field in VA01 transaction using BAPI_SALEORDER_CHANGE
Hi , i have to change the some customized fields (z-fields ) in transaction va02. how can i change the customized fields using bapi. i am using 'BAPI_SALEORDER_CHANGE' . i am writing my test program like this : wa_extension-structure = 'VBAK-ZZDELVRN