Networ to linksys g does not work but connects

connect to secure linksys G router with WPA using webkey
password accepted but does not connect just searches but lists network with lock

Go to Settings/Wi-Fi and tap the arrow to the right of the network to which you are connected. What is the IP? If it is 169... then unfortunately you are not connected to a network, your iPad is timing out and giving itself an IP because the router is not giving it one.
If that is what is happening then give the router a kick in the can by resetting it to factory settings and then powering it down about five minutes before powering it up.
While the router is powered down go to Settings/Wi-fi again and tell your iPad to forget the network. About two minutes after you have powered up the router go to Settings/Wi-Fi and tap Other... Enter the name of your network, select the form of password security the network uses and return and enter the password. Tap Join.

Similar Messages

I need to get into contact with Adobe support on renewal of my CC subscription which does not work but I cannot find any PHONE number just the referral to this forum - help, what should I do?? Thanks!!

I need to get into contact with Adobe support on renewal of my CC subscription which does not work but I cannot find any PHONE number just the referral to this forum - help, what should I do?? Thanks!!

Use the web chat:
Contact Customer Care
Mylenium

My wake-up/sleep button does not work, but the serial is out from Apple list to repair. What i do now?

The wake-up/ sleep iPhone 5 botton does not work, but the serial number is out of list to recall from Apple. The problem is so similar the described in the article in the site. I want to repair in the program, like other iPhones, how it is possible?
Thanks.

Then there isn't anything you can do about it then. Your only choice is to pay to have the device fixed or replaced. Apple is in charge of that, and as I said in the other thread, this is not Apple you are talking to, we are users like you and cannot do anything about that.

In google chrome my keyboard does not work, but seemingly only on a particular website....any suggestions?

my keyboard does not work, but seemingly only on a particular website while using Chrome....any suggestions?
Using a MacBook OSX 10.9.2

does it work in other browsers? Also, what website? When did this start happening?

My visual voice mail does not work,but I have properly set it up, how do I fix this?

My visual voice mail does not work,but I have properly set it up, how do I fix this?

Visual Voicemail is all carrier side, funny enough. Apple can't really do anything to troubleshoot it because it's outside of their realm. Be sure to contact your cellular carrier for further assistance

HT1937 My Iphone 3GS has just restored and I completed the things on the Iphone and then it says no sim card activated and I tried everything it said if it does not work, but nothing seems to work.

My Iphone 3GS has just restored and I completed the things on the Iphone and then it says no sim card activated and I tried everything it said if it does not work, but nothing seems to work?

All iPhones require a SIM for activation.
Insert a SIM in the iPhone.

Sync iPhone5 to Contacts does not work, but contacts to iPhone5, works..! Crazy..??

Hello all..!
I added a new contact to my iPhone 5, and after a day or two tried to find it from contacts. Resolt? NOWHERE..!!
I made all steps, before i write this question here. Tried almost(!) every help i found at sites. but didn't work.
Finally, I deleted the contact from my iPhone5, and added it at first at contacts. I made sync, and the new contact came to my phone..!
Please, what is wrong..??? This anomaly drives me crazy..!
iPhone5 --> Contacts (iMac) does not work.
Contacts (iMac) --> iPhone5 works..!
PS. Before "Mavericks" was Mountain Lion, without problem...
Thanks in advance

Well not sure about anyone else but finally spoke with "support" today.
First call I made I was told if I paid $79.00 I would receive assistance for a year.
They could fix my problem through my pc.
Well not paying.
Phone 1-800-APPLE and was told that because didn't pay for call display through
my provider it isn't going to work for me.
Seems they don't advise you of that when you are making a decision on buying a phone.
They at least could have put a *note saying function only works under specific conditions.
I would have checked that out first thing.
Lesson learned I guess. Now my provider supplies that option free for new plans but won't
apply it to mine. So much for customer service. This all within a couple of months.
Now if anyone has any information that would change what I was told please let me know.
Gayle

Share Screen not working but connecting to computer to see files does!?!!

Hi
Strange but I can see the computer I need to share screen with in my shared devices and I can "CONNECT AS" and see all my shared files but I CAN NOT share screen. It is properly enabled and share screen works with all my other networked computer.
Any ideas what gives here???!!! Thanks for any suggestions!

Same problem here, cannot login into a MacPro (10.6.4) from another MacPro (10.6.4), or from a MacBook (10.6.4), or from a MacBook Pro (10.6.4), all of them located in the same network (intranet).
As the original post, I can mount discs remotely, even ssh into the destination machine, but screen sharing (or even the simple vnc) just does not work.

Importing .p7b certificates using certutil does not work, but work with IE. I need to automatize certificate installation. Help!

Hello,
I have to add a trusted certificate authority to XP machines to allow use of mail via OWA.
There is a domain, but there are too remote machines which are not in the domain (and it's on them I'm experiencing the problem).
Domain sysdmin sent me the .P7B certificate, which I can load withour problem using import with IE. The certificate is stiored in the Trusted Root Certificate Authorities and it's all ok.
But I need to automatize the certificate import due to the hifg number of these clients as well as the linbe spped (very slow graphic), so I found the certutil utility.
I've tried with several commands (like "certutil -f -v -addstore root filename.p7b" or "certutil -enterprise -f -addstore NTAuth filename.p7b" and several variants), but the utility always said that the certificate is correctly imported, but when checking
with the MMC console I can't find it (and, by the way, trying to load again results in also being notified that the certificate is already loaded!), so all the stuf does not work.
What should I do to be able to import the .P7B in Trusted Root Certificate using command line (.bat file, of course)?
Many thanks in advance for any help!
Max

Hi,
As i can understand you want to import a .p7b file which is a chain of certificates. And certutil is not working.
I too had the same issue. After searching and thinking the alternatives for hours, got a solution which worked for me. Here is it.
Get certmgr.exe tool available with MS .net framework tools.
Try adding this to your batch file
certmgr -add -all -c "File.p7b" -s -r localMachine Root
where File.p7b is the file containing certificates. You can replace the name with your file name.
Check if its working.
Thanks,
Reyaz

DNS is wrong on vista pc so Internet does not work but works with iMac iPad PS3 using time capsule 1355...can not change settings on the pc vista..

I Hooked up time capsule ..set all the passwords. Works with iMac and iPad and PS3 . But vista say it needs to reset adapters. But does not work..show dlink router setting even though dlink is not connected. And has a different code...help

Is Vista computer running wireless or ethernet?
Is it plugged directly into the TC? If it is possible and you are running wireless please do plug it by ethernet directly into the TC to test.
Wireless is known problematic on Vista.. has always been so.
Is IP statically set on the vista computer??
show dlink router setting even though dlink is not connected
If this is wireless.. then please delete all the old wireless configuration.. and start afresh.

Apple TV2 led does not work, but apple tv2 works ok - is this normal

I have an apple tv2 that seems to work ok but the led on the front does not work.. is this normal? is the led burnt out?
is there a way to get it back working??
i have restored in via the tv menu and i have restored it via usb cable to itunes..
still no luck..
is there some option that is causing it to not work?
will it work ok with the led not working?
what is it for??
thanks

Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Resetting network settings: Setting>General>Reset>Reset Network Settings

Adobe pdf plug in for firefox, 10.1.4 version, does not work but can not update to new version, why?

Adobe pdf plug in does not work, when I tried to update following message appeared, "Adobe Reader 9.5.1 and lower has been blocked for your protection", how to solve this problem?

Could you review/adjust your preference for which program opens PDFs? I'm not sure how that drop-list behaves when there are multiple Adobe plugins. You might need to physically remove an old plugin file or two to make sure Firefox is not trying to use the old one.
* [[Use the Adobe Reader plugin to view or download PDF files]] <br>
''Edit: actually this article describe how to use the Options dialog Applications section to review/change the setting: [[How to disable the built-in PDF viewer and use another viewer]]''.
* C:\Program Files (x86)\Mozilla Firefox\Plugins (only one want nppdf32.dll here)
* In regedit.exe, check the following key for the source of obsolete plugins: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\MozillaPlugins
Both the file that stores download handling preferences, and the file which registers plugins, can be renamed and Firefox will regenerate them, so those remains options for further actions as well.

What if sync with new computer does not work. logical connection to old with WindowsXP, 32 bit version of iTunes. New is Windows7 with 64bit version

What if sync with new computer does not work?
logical connection to old with WindowsXP, 32 bit version of iTunes.
New is Windows7 with 64bit version

Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows

DHCP does not work while connected to TC throuh ethernet

I currently have a WRT54G router and a time Capsule. The WRT is connected to a cable modem, and the Time Capsule is connected to the router through a LAN port. The WRT assigns addresses in the range of 192.168.15.90 to .99 and the TC assigns addresses between 192.168.15.100 to .109. Connecting to the TC's wireless network works, but connecting to the TC or the router through an ethernet cable does not give an address. I have tried doing DHCP just on the router, just on the TC, and on both, and nothing seems to work, except a wireless connection. Is there a way to fix this?

Have you set up Connection Sharing to "Bridge Mode"?

BB Curve 8310 Home Charger Does not work, but Car charger charges Phone.

Help !!! Home charger does not charge phone. But Car charger does. But Home charger works with another curve.
What can be wrong with the phone?

Oddly, it could be the device USB going bad.
Can you connect your Curve to your USB > PC and see the Curve connected in Desktop Manager?
If so, do a complete back up of the device -- just in case it is the USB port ON the device going bad. It happens.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Networ to linksys g does not work but connects

Similar Messages

Maybe you are looking for