Network access when sleeping does not work.

My "Wake for network access" is not working.
I need to upload large files to clients.
I have my MBP plugged in and the screen is flip up not down. However when it goes to sleep when unattended, it loses network access.

My settings:

Similar Messages

When autofill does not work

When autofill does not work, what can the culprits be?
Deleting preference did not work. thanks.
Safaari 3.1.1.

Did you ever get your problem solved?
if so, please tell me since I have (since about a week) same problem.

How can play Itune song when authoriaztion does not work?

after sharing Itune file, how can I play song when computer authorization process does not work?

Hi dewhi,
You can use the Adobe Cleaner Tool to uninstall CS6.
You can download the cleaner from : http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

How to clone Boot Camp partition when Winclone does not work

The hard drive in my MacBook Pro is failing. It has 2 partions, one for Apple and the other is a Bootcamp with Windows 7.
I tried repairing it with Disk Utility, which did not work. I also ran DiskWarrior, which resulted in the error message: "Directory cannot be rebuilt due to disk hardware failure". I was able to copy my Apple files through DiskWarrior although there were a couple of errors.
My question is how to clone my Bootcamp Partition. I tried making an image with Disk Utility but it failed. I also tried using Winclone and it failed indicating there were hard drive issues.
Is there another way to try to copy the Bootcamp partition? I can boot to Apple so running a program/app or trying UNIX commands might work.
Thank you in advance.

Some previous forum comments I have collected regarding backup of BootCamp.
Acronis 2011 w/ plus pak, didn't work well previously
Ghost 15 - probably not
Casper 6 works for Windows on Boot Camp only
CopyCatX is more lengthy and sector copy so takes the longest.
Paragon Hard Drive Suite 2011 because it works great and they have CampTune
Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
Paragon HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
I tried the native Windows backup utility. It worked to backup and restore my Windows partition, but I noticed a "bad" side effect. When I would restore a Windows Backup to my HD, it would corrupt my MacOS boot partition, so I would then have to restore the Mac partition as well.
Winclone allows you to migrate your Bootcamp partition from one Mac to another Mac and make sure Windows will boot. However, if the processor (for example, Core Duo or i7) is a different type, the restored version of Windows may not be supported or be able to run on the new Mac. If you are migrating between Macs that are the same type (MacBook Air to MacBook Air, for example), you will have the greatest chance of success. You can try to restore Winclone images between different types of Macs (for example, a Mac Pro to a Mac Mini), but be aware that if Windows boots but does not reach the desktop, it is probably not an issue with Winclone, but rather the change in processor type.

Sleep does not work..

I have this wonderfull iMac G5 20" flat panel that works wonderfully; - only the sleep settings doesn't seem to work. I have tried every thinkable way, but to no use. If manually invoked everything is fine, - it's the timings that does not workl.
By the way; - apparantly there is no settings file in the preference folder?
Any suggestions out there?

Hi John,
You say that you have an iMac G5. The section you have posted to is for the Flat Panel iMac G4's. It might be an idea to post this in the iMac G5 section.
Cheers!
Karl

After upgrading to 4.0 my settings to clear history when closing does not work

After upgrading, per your recommendation, to 4.0 my history, cache, cookies, etc. are not being cleared when I close the browser, despite the fact that I have correctly re-adjusted my option settings. When I re-open the browser, not only has it not cleared anything, but opens not on my home page either, but on the last web page I was on! Why do properly set options for privacy work anymore?!

Digital Persona have abandoned their fingerprint reader and it will not work in Firefox 4. For more details see https://support.mozilla.com/en-US/questions/799388

Sleep does not work when MB is shut

My MB used to go to sleep when I shut it, but now it stays on consuming the battery. The screen goes off, but everything in the background is still working (ie. network runs, downloads still occur, programs continue to run without sleeping, sound/screen turns off but music file still runs). If I shut it and return two hours later, the battery is at 0%. Can I fix this?

Hi Clawdad37
I (and many others) are having the same problem, see this thread amongst others:
http://discussions.apple.com/message.jspa?messageID=5899374#5899374
Out of interest do you have problems with Bluetooth? I believe the two are inextricably linked.
You will find numerous attempts to solve this problem (incl, resetting PRAM, resetting SMC, trashing cache folders and changing safe-sleep settings). I have tried all of these methods (in pretty much every combination!) and although some seem to solve it, it is merely a temporary solution and could well be down to coincidence. Give them a go though and see if they work for you.
I thought update 10.4.11 had resolved the issue, but again this turned out to be a coincidence.
I took my MacBook to my local Apple store a few months back for the bluetooth problem (didn't have the sleep issue at the time or I didn't notice it). they found a fault with the Bluetooth module and replace it. Within 48hrs the Bluetooth was playing up again.
Now that I have exhausted all options, and once my exams are over this week, I will be taking the MacBook back to the store (I have 3yr Applecare). I will pushing hard that this is a major flaw and constitutes that the product is not fully fit for purpose. Not sure if you're in the UK, but we have pretty good consumer protection laws here - not that I want it to go down that route, I really like my MacBook and Apple as a company. I just want this problem sorted and given Apple's reputation for customer service I am sure it is only a matter of time.
If you don't have the 3yr Appplecare, and you are in your 1st year of warranty, I suggest you get it to Apple asap. Also, consider getting the Applecare, particularly for a notebook.
Hope you problem gets resolved, and if it does be sure to post to let others know.
Cheers!
Glanv

T40P ACCESS IBM BUTTON DOES NOT WORK AFTER INTIAL OPENING AND MUSIC PLAYS ????

Hello, from a very un-savy laptop and computer user,my T40P thnk pad doesnt work when you push ACCESS IBM BLUE BUTTON,??Ive tried to uninstall some of the IBM componets,But not haveing a real clue as what to uninstall ,i i did uninstall a few that a earlier post reply suggested,.?then i downloaded the programs again and ,still nothing works corectly,Im going to paste a list of installed IBM programs in this message ,so that if someone reads this ,they will see what i have and the versions too.Any help on this would be a real blessing ,im lost as far as being- A computer repair tech goes,Thank you in advance for any reply post to my problem,.Thank you ,what a great fourm to be invloved with,
Computer Name: TOMS
Computer OEM: IBM
Computer Model: 2373G5U
Serial Number: 99YHKN3
OS OEM: Microsoft Corporation
OS Name: Windows XP Professional
OS Type: Windows NT / 2000 / XP
OS Version: 5.01
OS Build: 2600
OS Service Pack: Service Pack 3
System Enclosure: Notebook
INSTALLED IBM SOFTWARE:
Package Name: Access Support
Version: "en2.0.61"
Package Name: AccessIBM
Version: "4.03"
Package Name: EasyEject
Version: 1.00.000
Package Name: eGatherer
Version: Unknown
Package Name: IBM Access Connections
Version: 1.00.000
Package Name: IBM ThinkPad Keyboard Customizer Utility
Version: 1.1.0
Package Name: IBM ThinkPad UltraNav Wizard
Version: "1.10"
Package Name: IBM TrackPoint Accessibility Features
Version: 1.00.000
Package Name: IBMPM
Version: Unknown
Package Name: Messaging
Version: "1.0.5.8"
* Version: ""
Package Name: NPdirect
Version: 1.00.000
Package Name: QConnect
Version: 1.00.000
Package Name: ThinkPadSoftwareInstaller
Version: "1.03.0301"
* Version: Unknown
Package Name: TPHOTKEY
Version: Unknown
Package Name: TpKmap
Version: Unknown
Package Name: TrackPoint
Version: Unknown
MODEL OF THINK PAD, IBM 2373-G5U T40P

Hi Tom. I just went through the same issue with my T42p. After uninstalling/downloading/reinstalling the Access IBM software it still didn't work so I found my way here. At first my visit didn't seem promising but I did a search of the forum for Access IBM and found a post in which somebody suggested installing the ThinkVantage System Update utility. I did that, rebooted and accessed the utility through the start/programs menu and installed 3 critical updates, rebooted again, et voila, Access IBM is fully functional. I've since gone back there a couple more times and am in the process of doing a fairly large download of optional updates. It appears to be a cool utility that even allows for setting up automatic updating. Kudos to whoever posted that link.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=TVSU-UPDATE
At least I'm fairly sure this is where I went to download the thing. Took a couple of tries to successfully flash the bios but all seems fine now. If you do decide to do this and also to flash the bios do yourself a favor and have your machine plugged into your AC adapter with a fully charged battery *before* you start that particular drill.
Luck
-joe
Joe T42p (T2373C96), T60p (8743FKE5)

Solution approach to MANY issues where automatic sleep does not work

Hi
I had many issues for a long time where my machine would not go to sleep automatically. This annoyed me quite a bit.
I have read long ago that this might happen if an application writes standard output to the console. Those write "events" you do not notice as user as long as you never open the "Console" application and check...
my console was empty...
BUT I checked some other logs and I found that basically and frequent log written prevents the machine from automatically going to sleep.
In my case it was related to have "Firewall logging" enabled. The firewall logged every 3-4 minutes that it was listening..
I turned off "Firewall logging" and finally my machine goes to sleep again automatically after the specified time of no activity
Michael

Hello Michael:
That is interesting, and thanks for posting. However, I tested the premise on my own systems and the firewall logging did not prevent the Macs from sleeping on schedule. I do admit that I usually put them to sleep when I am finished with whatever I am doing.
I do have a strange anomaly that causes my iMacs to wake on random occasions, but that is not relevant to your issue.
Barry

ASR9K access with ssh does not work.

Hi all, I have a ASR9001 enabled SSH server, it was working fine but when I try to access these messages appear:
P/0/RSP0/CPU0:Apr 21 05:31:41 : SSHD_[65747]: %SECURITY-SSHD-3-ERR_GENERAL : Failed to allocate pty
RP/0/RSP0/CPU0:Apr 21 05:31:43 : devc-vty[181]: %MGBL-TTY-3-KERNEL : Unexpected internal error encountered 'Resource temporarily unavailable' : pkg/bin/devc-vty : (PID=557258) : -Traceback= 4bc37e70 4de37b0c 4de3c3d4 4bc3a2d0 4bc3df28 4bc3540c 4bc3cd00 4ba74650 4ba7514c 4ba702c8 4bc5754c 4bc58464 40000130 40000d18
RP/0/RSP0/CPU0:Apr 21 05:31:43 : devc-vty[181]: %MGBL-VTY-3-SESSION : Error performing TTY session operation 'Checking access parameters for VTY': a194060d, ''tty-server' detected the 'fatal' condition 'TTY SERVER INTERNAL: Unknown error condition': Permission denied'
In the cisco page gives no recommendation for this, any comments for this?
regards

While I can not explain the details of the messages, it is very clear that there is some type of error (probably a software issue more likely than a hardware issue). This relates to the part that says "Unexpected internal error" and to the presence of traceback information. In my experience traceback is always related to a software issue.
Is this perhaps a transient (temporary) problem and after a while SSH worked again? Or is the problem continuing?
As a workaround it might help to reload the router. That might restore normal function for SSH. I believe that a longer term solution will involve upgrading to different code. If the router is covered by a maintenance contract it would be good to open a TAC case on this and get a more authoritative explanation than I am able to give.
HTH
Rick

HELP! while upgrading from 10.6.8 to mountain lion on MacBook pro encountered Mac HD error. Verify indicates Repair Disk needs to run but it will not highlight. Verify Permissions indicates I do not have access. Reinstall does not work. Tx. Freaking out

Really nervous. Can't get any of the support instructions to work. Error occurred while installing mountain lion upgrade from 10.6.8. PLEASE HELP!
I know I'll be checking for responses all night. Thanks

Assuming Mountain Lion did not install, you'll need to boot up from your Snow Leopard DVD (by holding down the C key while you reboot).
Once you've booted from the DVD (be patient, it's not exactly lightning fast!), you'll want to go to Utilities --> Disk Utility...and run Repair Disk.
The problem you're seeing is that there's something not right with your MacBook Pro's hard drive, and Repair Disk cannot be run on the same volume you booted from.
If Repair Disk was run successfully when you booted from the Snow Leopard DVD, and you see indications that whatever was wrong was corrected, you can now boot back up again from the MacBook Pro's hard drive. Once you're up and running on the internal hard drive, try installing Mountain Lion again.

"accessibility.properties" file does not work in J2SDK1.4.2

Hi,
What is the file that is equivalent to "accessibility.properties" in J2SDK1.4.2 . I tried adding "assistive_technologies=EventTest" to "accessibility.properties" file by creating a new file. but the JRE is not loading this class by default. But the same class is loaded suucessfully when i use "Java -D" parameter in command prompt. Can someone please tell me a way so that my class will be loaded always when ever a Java Application is loaded. or is there any other way to achieve this ?
Thanks and Regards,
Srinivas.

ArrayList ar = new ArrayList();
FileReader fr = new FileReader("studinfo.csv");
     BufferedReader br = new BufferedReader(r);
     String line = "";
     while((line = br.readLine()) != null)
          ar.add(new ar.(line));
     Collections.sort(ar);
my studinfo file contains fname, lastname,e-mail,age,state.
i need to sort it through fnaME
i also need to sort it by state wise.
can u plz help me.

Updated Macbook to 10.5.8 and now sleep does not work?

I have updated my Macbook to 10.5.8 from 10.5.4 and now when I choose "sleep" it shuts down every time and ignores sleep mode
Anyone have an idea why it is doing this. Quite annoying..

now I notice my Mac is showing me the restart choices asking me if I want to restart or make it sleep every 5 minutes or so? First it shows as like on top of the screen with shadowed corners (like expose) and then centers towards the middle of the screen.
Is this a Mac virus or someone installed something on my Mac or?

What to do when Firefox does not work at all?

When I log on I get a 'New Tab' but the page is blank. I tried to fix this through your website but could not complete because I don't have a key code. I uninstalled and then reinstalled Firefox but the problem continues. Thank you.

If you see '''a blank page in browser startup''' you must modify '''browser.startup.page''' in [http://kb.mozillazine.org/About:config about:config] .
type in the address bar '''about:config'''
then press the button '''i'll be careful i promise'''
then type in the bar '''browser.startup.page'''
then '''right-click on it''', select '''modify''', put '''1''' (probably you have 0)
click OK, exit firefox and restart-it.
see for more info : [http://kb.mozillazine.org/Browser.startup.page browser.startup.page]
If you see '''a blank page when you open a NEW tab''' this is default in firefox and
to change that, if you want to open homepage or other page use 1 these add-on:
[https://addons.mozilla.org/en-us/firefox/addon/newtaburl/?src=search NewTabURL add-on]
[https://addons.mozilla.org/en-us/firefox/addon/new-tab-king/?src=search New Tab King add-on ]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

What to do when remote does not work

What do u do when the appl tv screen loads but the remote doesn't work for it . I changed the batteries and turned off itv now what??

Welcome to the Apple Community.
You may have inadvertently paired another remote to the Apple TV.
Hold the remote close to and pointing at the Apple TV, hold down the menu and rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Network access when sleeping does not work.

Similar Messages

Maybe you are looking for