Network / activity relations

HI
Can anyone tell me where can I find the connection between networks (field AFKO-AUFNR) and activities (field AFVC-AUFPL)
I'm trying to develop a mass confirmation process with BAPI_NETWORK_CONF_ADD
cheers
matej

enter network number in table AFKO to get AUFPL
use this value of AUFPL in table AFVC

Similar Messages

Project related tables and link for services in Network Activity

Dear Experts,
    My requirement is I need a table for services in Network activity before release of Network and link for services to another table(Project related before PR).
Ex : Network             Activity           Service
        XXX                     XX                   12345
      So I need Service field, which is updating in ESLL was unable to link with another table to get the Project Number. So please help me .
Regards,
Srikanth.

Dear sushrut sheth,
thank for the reply
I looked in AFVC before to post the Issue but in this table the Activity is only updating but not the individual service items
I required the table which is updating the individual service line items

PS Network & activity Table related with PO

Hello experts ,
I need a table name which will give me the details of
1) Network is a primary key and related to it the list of activity numbers .
2) now I also need to link these with PO number ???
Please help
Murali.s

Use below link for table linkage. From Proejct You should get WBS from WBS you should get Network activity via Counter SAP Project System - A ready Reference ( Part 2 )
Pass this network NPLNR (Network Number for Account Assignment ) and AUFPL in to table EKKN. Check flag for that Purchase document is not deleted via field LOEKZ
With Regards
Nitin P.

Cj20n all levels of WBS wrt PR by relate NETWORK , ACTIVITY No

Dear SDN Team,
1. Is there any PS table to find out WBS Element levels for individual Purchase Requisition?
2.In our orz all PR is maintained by Network activity No. in EBKN table, where i have already got details of Network for respective PR. But how can i get WBS Elements of all levels for particular PR with this Network?? Also i want to know Table for activity No for individual PR?
rgds
sp
kolkata

Hi ,
Use this BBP_WBS_GETLIST

BI content for Daily progress / confirmation in network activity R/3

Hi All,
Please advice, is there any BI content to get quantity / daily progress from network activity in SAP R/3 . I found 0PS_NWA_EVA but it does not provide quantity for confirmations.
Please Advice.
Cheers,
Nies

Hello
We will move this thread to the [SAP Netweaver BW |SAP Business Warehouse;forum as this is not related to PI.
Regards
XI/PI Moderator

Can a network server or network activity itself cause OS X to beachball/freeze?

Curious to know if a Mac freezing can be caused by Network activity? such as connecting to a local server or exchange account?
a lot of system freezes occuring and seems it could be related to network activity?

It's not my WOW problem. It's QuickTime X problem. I don't really care, I don't use QuickTime X, but maybe it would be worth to fix this.
More importantly - will Apple provide QuickTime 7 Pro even in future? I mean QuickTime 10 (X) seems like a future product. So obviously one must think QT 7 is oldie which will be eventually gone...
So will QuickTime 7 (Pro) still stay or it's considered as oldie which was moved to utilities and later will be removed? Because QT 7 is simply way better. I don't need to publish my movies on YouTube or whatever, but I need to use the options of QT 7 pro.
Thanks.

Costs on internal network activity

Hi,
I use SAP ECC6, actually.
I created an internal network activity and I linked it a work center and an activity type.
When I run a report, every report, I don't see the costs relative to this network activity.
Please, could you help me?
Thanks a lot in advance
Regards

Hi,
Please ensure you have followed following steps:
1. Assigned cost center and activity type on costing view of workcenter. After this assignment when you assign work center to activity, the activity type gets automatically populated.
2. Maintain rate for activity type in Tcode KP26. Take help of your FI consultant.
3. If your system is not calculating cost during saving of project, you need to manually calculate cost. Click on activity and press CtrlF10 to calculate cost and CtrlF11 to display cost.
Hope this helps.
Regards

Network activity stalls

I've searched to try to find these symptoms mentioned anywhere else online, but to no avail, so I decided to post here. I have a Powerbook 12" G4, 1.33GHz, 1.25MB, that will stall all network activity from time to time, and it's getting increasingly worse. I've eliminated everything I can think of to isolate the problem. It's plugged directly into a High Speed modem now through an ethernet cable, firewall on, bypassing the wireless router. The problem persists. I think I can safely say the problem is in the Powerbook. Whether it's a hardware or software problem, I just don't know. Oh yeah, I've tried using it on two networks, two different ISPs, using two different modems, and the problem persists.
Before, when I was surfing wirelessly through the Airport card, I found that turning Airport on and off (menubar) would often work, but not always. Now that I'm hardwired, I'm leaving the Network Preference pane open in order to hit "Renew DHCP Lease" whenever it stalls, and that works most times, but not always. It will "usually" fix itself if I wait long enough. (BTW, I've hit that button 3 times in the last few minutes while surfing discussions.apple.com. It's like the Powerbook has temporarily forgotten where the net is - amnesia)
Observations:
* Sometimes, not always, the CPU useage pegs at 100% while it's stalled. (What's it doing?)
* Non-apple software, that might be contributing to the problem, are the aggregators I've started using. Apple's own ITunes is the one I use for podcasts. Democracy Player (video) and Vienna (newsfeeds) are the other two. They send out multiple requests simultaneously during a refresh. I've witnessed downloads, in progress at the time using another program, completely stop when I do a refresh with any of those aggregators. I've seen the network stall many times, using ITunes too, and the feeds time out instead of refreshing.
* I'm using Firefox for the web. As mentioned, it will stall while surfing regularly. Some files downloaded with Firefox have stalled, and they do NOT resume the download afterwards. I've had to start them over again.
* BitTorrent usually works fine all the way through a download, as long as I leave it alone. However, I've watched aggregator refreshes kill torrent downloads that were in progress, cutting connections to all peers. I don't think BT is causing the problem, but it is being affected.
I reinstalled the system a few days ago (archive and install) and then updated to 10.4.8 through software update. It stalled two times while downloading those updates too, while the computer was NOT attended. Sigh. The half-finished downloads did NOT resume, they had to started over from scratch.
I don't know what else I can add to this.
Hitting "Renew DHCP Lease" while it's stalled, will often "unstall it" and then it finishes what it started. But not always.
I want to reiterate that the stalls are not entirely consistent, that sometimes everything works fine. It's just that the problems seem to be related to these actions, like there's something that's not quite up to the task, not every time. That's how it seems to me. It's frustrating.
Suggestions, comments, and confirmation from others with similar issues, would be welcome. Can anyone suggest or point me to a fix?
thanks
Powerbook 12" G4, 1.33GHz, 1.25MB Mac OS X (10.4.8)
Powerbook 12" G4, 1.33GHz, 1.25MB Mac OS X (10.4.8)

Update:
2) I pulled the Airport card and cleaned the contacts
with a pencil eraser and reinstalled. Then I noticed
the power plug has a flange on the centre pin that
compresses. I took a butter knife and spread the
flange contacts apart, just a bit, and then plugged
it in. (The thinking being that the centre pin
contact was too loose, and therefore, possibly,
unable to power the card under full load
conditions.)
Update 2:
Well, I'm 99% sure the procedure above solved my network dropout problems while using Airport (wireless). I mistakenly called this plug the power plug, when apparently it's the antenna plug. Whoops!! It worked out to the same difference though. Poor contact from the centre pin was reducing the card's effectiveness. It's rock solid now.
My other network problems turn out to be related to the new ISP. I think their modem is flaky. It's a 30 day trial, so I'm returning it and getting a replacement. I've been surfing problem-free with the old ISP, now that Airport is fixed, but the new ISP (modem) is still giving me many network problems, that completely disappear when I switch back.
For anyone interested, I'm testing Rogers Portable Internet (available in Canada). It's an early version of WiMax and it looks promising. I recently read where some hotels are charging outrageous small fortunes for conference room net access. This simple device could literally kill that as a profit centre. Just plug the modem into any electrical outlet and you're online. It's 1.5 Meg down, 256K up, and at about the same price as regular High Speed dsl or cable. That's not too shabby. (...if it works as it should.)

Capacity Utilization by network activity for each period

Hi all,
How do i find out the capacity utilization at the network activity level. My requirement is to findout the remaining requirement/capacity of a workcenter for each period, which will be the cumulative value of the non utilized resources/hours for the previous months, based on distribution key.
The same functionality is there in CM07, but what is the exact functionality and how it can be reimplemented in a report?

Hi,
Check if table KAKO helps. You may have to calculate the remaining capacity from available and utilised.
Regards

Customer Enhancement in Project Network Activity

Hi Gurus,
I add a new subscreen in project network activity(cj20n). I use the structure CI_AFVU as field structure.
It contains two fields 1) CI_AFVU-ZZSALES_DOC
2) CI_AFVU-ZZSALES_ITEM.
The exit is CNEX0008 in which I have two function exit for PBO and PAI for that subscreen.
EXIT_SAPLCONW_002 for PBO
and EXIT_SAPLCONW_003 for PAI.
My problem is in PAI I am not able to import data from screen. I use the following code:
CNCI_AFVU_EXP-zzSALES_DOC = CI_AFVU-zzsales_doc.
CNCI_AFVU_EXP-zzSALES_ITEM = CI_AFVU-zzsales_item.
and one more thing is that Different Activity takes the same Value in both the customer fields which should be different. Although in debugging mode CI_AFVU display the values, but when I am trying the above code it give me a compile time error 'Field "CI_AFVU-ZZSALES_DOC" is unknown. It is neither in one of thespecified tables nor defined by a "DATA" statement . . . . . . . . . .'
I need a solution for that, Pls help.
Thanks,

no comments

How to remove a network activity for one employee from the worklist?

Hi,
We are using the SAP project system where project resources are assigned network activities. In the worklist in the ESS timesheet, the assigned network activities are displayed for the employee. The problem is when several employees are assigned for a network activity, and one of them no longer should register hours on this activity. How can you remove the assignment (using dates etc.) for only one person so that the network activity no longer is present in his worklist in the timesheet?
Regards,
Petter

Well for this pernr you need to have a special coding to check for network and pernr.
other would be a simple way using cats0003 to validate data an employee records here you can have a individual check
for this pernr that he doesnt record for this activity and throw an error when he does! this is simpler

Network activity report printing

I can't print multiple pages of the network activity report. When I view multiple pages under the print option, one page shows up with a line across the bottom of the page.
Having problems with my Comcast cable loosing internet connection and want to show them a report over a week's time but can't get more than a page to print. The screen report shows it all,just can't print it.
I'm running 3.11.9139.94. Computer is Vista home edition.

Hello billj, uninstall LELA and install Network Magic instead! LELA's print option doesn't work (based on what i've experienced). I tried Network Magic program and its printing option works!
"Nankurunaisa" "It will all work out just fine!"

Run time Error while creating Network Activity.

Getting Runtime -
> Runtime error: ILLEGAL_TEMPORARY_OBJNR ("TM0000000008NV" " " " ")
While trying to create the Network activity in the following sequence.
CALL FUNCTION 'BAPI_PS_INITIALIZATION'.
*--> Create the Network Activity
CALL FUNCTION 'BAPI_BUS2002_ACT_CREATE_MULTI'
    EXPORTING
      i_number     = i_number
    TABLES
      it_activity = t_activity
      et_return    = it_preturn.
     extensionin = extensionin
     extensionout = extensionout.
LOOP AT it_preturn INTO wa_preturn.
    IF wa_preturn-type EQ c_error OR
       wa_preturn-type EQ c_termination OR
       wa_preturn-type EQ c_exit.
      l_error = c_yes.
    ENDIF.
ENDLOOP.
IF l_error IS NOT INITIAL.
    ROLLBACK WORK. " satish 09/02/2008
    EXIT.
ENDIF.
CALL FUNCTION 'BAPI_BUS2002_SET_STATUS'
    EXPORTING
      number                   = i_number
      set_system_status        = 'CRTD'         " changed 'REL' to 'CRTD' satish 11/04/2008
    IMPORTING
      return                   = lwa_ret1
    TABLES
      i_activity_system_status = lt_act_status_set
      e_result                 = lt_stat_ret.
IF lwa_ret1-type EQ c_error OR
     lwa_ret1-type EQ c_termination OR
     lwa_ret1-type EQ c_exit.
         call function 'BAPI_TRANSACTION_ROLLBACK'.
    EXIT.
    endif.
CALL FUNCTION 'BAPI_PS_PRECOMMIT'
    TABLES
      et_return = lt_return.
   CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = 'X'.
Help really appriciated.
Thanks
Mani

Hi,
Go through the SAP NOTES 777934
Symptom
When a new network activity is created using BAPI, BAPI_BUS2002_ACT_CREATE_MULTI and then the newly created activities are
reverted by using BAPI BAPI_TRANSACTION_ROLLBACK,the control objects of newly created activities are not reverted, therefore when you perform a
commit of the transaction by using BAPI_TRANSACTION_COMMIT, a short dump'ILLEGAL_TEMPORARY_OBJNR' occurs.
Other terms
short dump 'ILLEGAL_TEMPORARY_OBJNR', CKCOUEB, Costing Sheet, Posting Date, Overhead key, CK_F_CO_OBJECT_ALL_REFRESH, BAPI_PS_INITIALIZATION.
Reason and Prerequisites
This is caused by program error. This note references SPC 770601 and created for corrections to be included in support package.
Solution
Implement the source code corrections.
Regards,
Dwaraka.S

How to check plan line items for plan cost at network activity level?

Dear all,
How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
I am not able to check using CJI4 or CJI9 report.
Kindly advise.
Thanks and regards,
Jessie

Hi Jess,
Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
But I am not sure if suits your requirements. Wait for other experts to comment on this.
Regards,
Amit

Java - Constant Network Activity - Eating up Internet Bandwidth!

Hi,
The Process "java"is constantly sending data (100-140 KB/sec) and receiving Data (2-4 KB/sec) 24x7.
I have terminated all "cloud" applications (iCloud, Google Drive, Dropbox and CrashPlan etc.). The total
Data sent is about 150 MB in less than 15 mins after a complete reboot eating up my internet bandwidth.
Upgraded to 10.8.3 and also the March 4th Apple update for Java 6.
Called AppleCare and they acknowledged the issue, but sent me off to a Java customer support line
who then turned me down (as I was not a licensed/commercial user of Java). Applecare was useless.
Anyone else having the same issue? How can I completely uninstall Java? Any help or insight is appreciated.
BR,
Raj

Bingo! That was it. Many thanks for connecting CrashPlan and Java. I thought exiting the CrashPlan application would turn this backup service off. But as you suggested CrashPlan runs a Java Daemon/Engine in the background even after exiting the CrashPlan application.
The below command effectively shutsdown the CrashPlan's Java background Engine and the network activity ceased immediately.
sudo launchctl unload /Library/LaunchDaemons/com.crashplan.engine.plist
(From CrashPlan's support site: http://support.crashplan.com/doku.php/recipe/stop_and_start_engine )
Many thanks Linc Davis.

Network / activity relations

Similar Messages

Maybe you are looking for