Network Adapter issue

I installed enterprise edition 10.2.0.3 on my laptop successfully. I've been able to access the database successfuly. I rebooted my computer and I now get error 'The Network Adapter could not establish the connection'. I thought that maybe the ip address has changed (web access via DSL). I ran lsnrctl status and it reported TNS-12541: TNS:no listener. I tried lsnrctl start and I get error TNS-12560: TNS:protocol adapter error TNS-00530: Protocol adapter error.
Could someone please provide ideas of what to do to correct the error?
Thanks in advance!
Jerry

Here you go!
Thanks!!
Jerry
C:\Users\Jerry>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.3.0 - Production on 03-SEP-2008 12:25:11
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.6)(PORT=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\Users\Jerry>

Similar Messages

T410 Network Adapter Issue

I have a Lenovo Thinkpad T410 with WIndows 7 . It has "Intel 82577LM Gigabit " network adapter. The issue is that , sometimes, my laptop doesn't connect to the internet. The problem is very intermittent. There is no issue with my wired network connectivity , as I'm able to connect to my Sony Vaio Windows 7 laptop without any problem.
I have tried everything I could get on Internet forums. I updated the network driver also. But the issue still occurs sometimes, and after a few hours , inexplicably, it starts working fine.
Any help would be most appreciated.
Thanks,
Suraj

If you're talking about wired connection, try this:-
1. Click the "Start" button and choose "Control Panel" from the Start menu.
2. Click "Device Manager" on the "Control Panel."
3. Click the arrow icon next to "Network Adapters" to extend the category.
4. Right-click on your network card and choose "Properties" from the menu.
5. Navigate to the "Power Management" tab.
6. Remove the check in the box next to "Allow the computer to turn off this device to save power."
7. Click the "OK" button to confirm the new settings.
Let us know how it goes.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

C560 Network Adapter Issues

Hello,
I've had my Lenovo C560 for a couple of months now, and recently it's been giving me fits for trying to maintain an internet connection to my modem/router. It's over a WiFi connection with other connected devices, i.e. Kindle Fire, iPhone, Galaxy S3, etc., working just fine. The issue, every time I've run Troubleshooting, has to do with the "Access Point or Network Adapter." I've powered down the modem/router numerous times for 10 seconds a piece, and mostly had success. What, if anything, can I do to fix this?

@the_mad_sooner ,
Hello and thank you for posting on the HP support forum. So that I can help you with this please post back with the product number of your system.
The reason I need this is so that I can provide you the link to the drivers that have been built for your system.
The drivers are built for each model based on what has been projected. Now if there are no vista drivers for your system on the support page then you will have to find a driver that may work or switch to an OS that is covered on the support page.
Many of the drivers and hardware built are proprietary and ones from the chipset manufacturer may not work.
How Do I Find My Model Number or Product Number?
You will also notice when searching for drivers for any system that from one version of an OS to another the driver may be totally different so it is no just about the system being 32 or 64 bit.
I hope this helps.
Please post back soon so I can get you the link to the correct drivers.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Z87-GD65 Network adapter issues

Several times each day I encounter a BSOD relating to the network adapter/drivers (e22w8x64.sys) and from a cursory search on here it seems I'm not the only one.
Advice seems mixed and I'm yet to see anything definitive from MSI but the common solution adopted by others seems to consist of using "Killer cleaner" and then installing "Killer Suite" direct from Qualcomm's website but this just makes things worse for me at least.
I assume the purpose of killer cleaner is to remove all traces of the previous driver and I assume killer suite contains the latest and most up-to-date drivers but once I restart the system, as prompted, I have internet connectivity for about 3 seconds before it changes to "limited connectivity" and stays like that. Device manager assures me that the NIC is working correctly but it simply refuses to change from "limited connectivity" regardless of what I try.
Any suggestions?

Quote from: .Griff. on 15-October-13, 19:06:40
If only I could stop the BSOD's.
One of the perks of 'killer networking'
Kill your lag, kill your system.

Network Adapter Issues DC7900 Ultra Slim

The version of the operating system is irrelevant for this issue as it is occurring with both 32 and 64 Bit. I recently purchased two machines to refurb and the generic drivers are not working on either machine. That's okay. I load the OS on the first one, install the network driver (Intel 82567LM-3) from HP site and error code 10. I uninstall and try the driver directly from Intel, same thiing...Device Cannot Start. So I repeat same exact order on the second machine, and exact same results. Is there something in the BIOS I'm not getting? Is this a fatal flaw in these machines? Bad MOBO? Should I just get USB to ethernet adapter? Of course I've just considered going wireless only, but would like to know if I've done all that can be done. Does anyone know of something that can be done? Any advice will be greatly appreciated.

@the_mad_sooner ,
Hello and thank you for posting on the HP support forum. So that I can help you with this please post back with the product number of your system.
The reason I need this is so that I can provide you the link to the drivers that have been built for your system.
The drivers are built for each model based on what has been projected. Now if there are no vista drivers for your system on the support page then you will have to find a driver that may work or switch to an OS that is covered on the support page.
Many of the drivers and hardware built are proprietary and ones from the chipset manufacturer may not work.
How Do I Find My Model Number or Product Number?
You will also notice when searching for drivers for any system that from one version of an OS to another the driver may be totally different so it is no just about the system being 32 or 64 bit.
I hope this helps.
Please post back soon so I can get you the link to the correct drivers.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Boot Camp Network Adapter Driver

I boot camped my mac successfully but couldn't download Apple's Support software(Not big enough flash drive). I thought I was fine but it turns out I need a Network Adapter Driver. Is my only solution getting a bigger Flash drive?
Or is there a place where I can get it seperatly as that is all I need I believe.
Thanks in advance.

I just bootcamped mine to windows 8 last night. It ran OK apart from the missing network adapter issue which I then re-ran bootcamp assistant with only the "download the latest Windows support software from Apple" checkbox ticked and saved it to a USB. The bootcamp files it added to the USB were in a folder that was only 512MB. Started up bootcamp Windows. ran the setup.exe from the USB and it fixed the network adapter issue no problems.

Oracle 10G on XP : Network Adapter Connection Issue

Hi,
I am trying to install an enterprise software which uses Oracle 10g database.
I have installed the database, but installation of the enterprise software fails with the following error message.
THROWABLE EVENT {Description=[Failed to create connection],
Throwable=[java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:319)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:344)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:148)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:545)
The listener name is "LISTENER" and Listner service name is OracleServiceBMCPDS.
The listener is running.
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.2.0 - Production
Start Date                10-JUL-2009 16:54:48
Uptime                    0 days 0 hr. 38 min. 11 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\abc...\network\admin\listener.ora
Listener Log File         C:\abc...\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=1521)))
Services Summary...
Service "BMCPDS" has 1 instance(s).
Instance "BMCPDS", status UNKNOWN, has 1 handler(s) for this service...
Service "BMCPDS.corp.capgemini.com" has 1 instance(s).
Instance "bmcpds", status READY, has 1 handler(s) for this service...
Service "BMCPDS_XPT.corp.capgemini.com" has 1 instance(s).
Instance "bmcpds", status READY, has 1 handler(s) for this service...
The command completed successfully
I am not a DBA hence finding it hard to resolve the issue. Your help is highly appreciated.
Edited by: user3533384 on Jul 10, 2009 6:12 AM

Are you talking about the Enterprise Manager Console provided by the oracle or some other enterprise software? If it is enterprise software then you need to the do the proper setting for network connection to database. Probably you will have to configure tnsname.ora and sqlnet.ora. Can you connect through SQL*Plus utility? Go to Run-->SQLPLUSW type in the username password and tnsnames entry for the database. See if you can connect. If not post us the error message.
Regards.

AnyConnect installation issues - Network Adapter is not created - cannot find any error?

I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access. I am about the only person with this installation issue, that I know of. When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect. I have turned off Firewall services, I've turned off SQL services, Citrix, etc. But nothing I have tried allows this to install correctly.
When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
Can anyone here point me in the right direction - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
Thank you!
Michael

Hi Jacob,
Let's try this & report the outcome...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
The interface that connects to the Internet should be dragged to the top of the list.
Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
208.67.222.222
208.67.220.220

AnyConnect installation issue - Network Adapter is not created - cannot find any error?

I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access. I am about the only person with this installation issue, that I know of. When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect. I have turned off Firewall services, I've turned off SQL services, Citrix, etc. But nothing I have tried allows this to install correctly.
When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
Can anyone here point me in the right direction - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
Thank you!
Michael

Hi Jacob,
Let's try this & report the outcome...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
The interface that connects to the Internet should be dragged to the top of the list.
Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
208.67.222.222
208.67.220.220

Z87-G45 Network Driver/Adapter Issue

Hello,
Since I purchased this motherboard a year and a half ago I've been having an issue with the network adapter. Typically when I boot my computer my internet won't work. When running the Windows Troubleshooting tool it says that the wired network adapter is experiencing problems. In order to get my internet to work I usually unplug and replug in the network cable a number of times, disable and reenable the adapter, and/or restart until it starts working again. Not a very clean method, but it usually works.
In an attempt to fix this issue, I downloaded the network drivers from the MSI website. I removed the driver program and uninstalled the driver from device manager. When I run the driver installer I get a message saying You must remove the following installation(s) before the setup can proceed. Please remove from Control Panel -> Programs and Features: * Qualcomm Atheros Killer Network Manager
The Qualcomm Atheros Killer Network Manager is not listed under Programs and Features since I've removed it. I cannot find anything related to Qualcomm in my computer's program files or anything. I'm really not sure where the installer references in order to determine that the program is installed - I'm thinking it could possibly be a reg key or something. Regardless, my wired internet is not working at the moment. I'd appreciate any help you guys could provide in the matter.
Thanks

Hey again,
I was able to install my network driver software, but I'm still having an issue with the network adapter. I'm not sure if this is a driver or a software issue, but like I said in the above post, in order to get my internet to work through that network adapter I have to unplug and replug in the network cable a number of times and disable and re-enable the adapter through the adapter settings page.
Would anybody be able to advise me on this?

Server 2012 R2 - The system failed to register host (A or AAAA) resource records (RRs) for network adapter

We seem to be having an issue recently after introducing new Windows Server 2012 R2 servers where they fail to register DNS correctly. The Windows Firewall is off and the servers are on the same VLAN with no firewalls between them.
When I do an ipconfig /registerdns or wait 24 hours for the system to try we get the following error:
The system failed to register host (A or AAAA) resource records (RRs) for network adapter
with settings:
Adapter Name : {4A0ECF05-193F-4BEA-AA46-BEC593BA752B}
Host Name : SRV-DATA
Primary Domain Suffix : internal.local
DNS server list :
192.168.0.50, 192.168.0.42
Sent update to server : <?>
IP Address(es) :
192.168.0.99
The reason the system could not register these RRs was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative
for this name does not support the DNS dynamic update protocol.
To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
On our DNS server we have set for the internal.local zone Secure Updates only so that looks good because it is Active Directory that should be handling this authentication to update the record I assume. Just to mention that when also doing an ipconfig /regsiterdns
the update fails within a few seconds.
Source: DNS Clients Events
Event ID: 8018
User: NETWORK SERVICE
This issue is only affecting Windows Server 2012 R2 clients and testing with Windows Server 2008 R2 clients works no issues. So is this a mis-configuration or a bug with Windows 2012 R2? I have checked all DNS settings on client / server which all look good
to me so reaching out now to see if anyone has any ideas?
Environment:
- Windows Server 2012 R2 Domain Controllers (Forest/Domain Levels 2012 R2)
- Windows Server 2012 R2 Client machines (Physical and Virtual)
- Windows Server 2008 R2 Client machines (Physical and Virtual)

The zone is configured as "Secure Only"
The PDC is the SOA for the zone
I dont have a packet capture from the DC, only the client.
The query you asked me to run is too long to paste in here, however this is the DNS zone it cannot update:
NotifyServers :
SecondaryServers : {10.2.0.3, 10.2.0.5}
AllowedDcForNsRecordsAutoCreation :
DistinguishedName : DC=internal.local,cn=MicrosoftDNS,DC=ForestDnsZones,DC=internal,DC=local
IsAutoCreated : False
IsDsIntegrated : True
IsPaused : False
IsReadOnly : False
IsReverseLookupZone : False
IsShutdown : False
ZoneName : internal.local
ZoneType : Primary
DirectoryPartitionName : ForestDnsZones.internal.local
DynamicUpdate : Secure
IsPluginEnabled : False
IsSigned : False
IsWinsEnabled : False
Notify : NoNotify
ReplicationScope : Forest
SecureSecondaries : TransferToSecureServers
ZoneFile :
PSComputerName :
CimClass : root/Microsoft/Windows/DNS:DnsServerPrimaryZone
CimInstanceProperties : {DistinguishedName, IsAutoCreated, IsDsIntegrated, IsPaused...}
CimSystemProperties : Microsoft.Management.Infrastructure.CimSystemProperties

Broadcom 802.11n Network Adapter not working on Windows 7 64bit

As the title suggests, my laptop (Alienware m17x) is installed with the Broadcom 802.11n Network Adapter and Windows 7 64bit Home Premium. I have had several other driver incompatibility issues with Windows 7, but those I have slowly been able to resolve. This however just cropped up after two months of successful use. Yesterday it started failing to connect to the internet, telling me that no wireless connections are available. I live in a dorm, and everyone else on my floor has successful wireless, including my Ipod Touch, PS3 and XBox 360. I called Alienware/Dell Support and we spent hours trying to fix the problem and all look well until I rebooted my laptop this morning and the same issue reappeared. When I reboot my laptop, all I get is a notification that no networks appear in range. If I uninstall the broadcom chip and let windows install it after a boot up it works until the machine is rebooted a second time. I have tried over a dozen windows 7 drivers for the chip, and about half a dozen vista drivers and they all have the same results, works on the first boot, fails every time after that

Just registered to say, on an Alienware M17x system as well running Windows 7 Ultimate, here is a link to a solution that worked exactly for me:
http://forum.notebookreview.com/alienware/436486-guide-properly-solve-wireless-connection-problems-m17x.html
All I did was section I.a. If the link is down, I copied the only section that I needed to follow out of this guide, in order to get my wireless to work repeatedly without having to uninstall the wireless driver every single reboot. Now it works perfectly,
already connected to a wireless network on startup.
I.a. Disable Device sleep on disconnect
Some newer Nvidia Ethernet drivers have a feature called Device sleep on disconnect. This is the culprit. Normally, it should only put the Ethernet adapter to sleep when the cable is disconnected, but it's buggy and thus kills the wireless connection as
well.
Follow these steps to disable this feature on your Nvidia Ethernet Adapter:
1. Open the Windows Device Manager by hitting Win+Pause, then click on Device Manager on the left side.
2. Double-click on Network adapters.
3. Double-click on NVIDIA nForce Networking Controller (yes, that's the wired Ethernet adapter indeed).
4. Click on the Advanced tab.
5. Select Device sleep on disconnect.
6. Set the Value to Disabled.
7. Click OK and wireless should work again (might require a reboot afterwards, but probably not).

OWB Error while deploying the mapping Io exception: The Network Adapter co

Hi,
We are using OWB 10.2 in our production environment.Actually we are using OWB only for development.
After deploying each mapping we will create scheduler job for execution of these mappings.
Recently our staging DBs port has been changed to 1522 from 1521 and i have gone throgh the below steps.
1) Changed the port in tnsnames.ora file.
2) In Start Control Centre Servioce ,i have changed the port to 1522 for owbownr user and started the service successfully.
3) i have run the script UpdateLocation.sql from the OWBOWNR schema and updated the port number.
4) I tried to run the UpdateControlCenter.sql in owbownr schema and staging schema also,but i am getting an error like below.
SQL> @UpdateControlCenter.sql
This sql script sets the host:port:service parameters for a control center
in the OWB Client Repository.
The connection type must be host:port:service and cannot be changed
using this script.
Enter Control Center Name: DEFAULT_CONTROL_CENTER
Host: 10.109.65.62
Port: 1522
Service Name: DWHOWNR
Update location properties for DEFAULT_CONTROL_CENTER
Location Type =
Control Center DEFAULT_CONTROL_CENTER Found
Connection Type SQL*NET Connection cannot be updated
PL/SQL procedure successfully completed.
5) When i am running the service_doctor.sql on owbownr schema i am getting incorrect port number like below
SQL> @service_doctor.sql
There are errors in one or more PL/SQL packages and functions
Platform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is available
There is a problem accessing the service startup script from the database
server
Here is the detailed error message which contains the name of the start
script file:-
Service startup file 'null/owb/bin/unix/run_service.sh' is not
accessible from the database server on instance number 1
Please verify that the disk containing the file is visible to the
database server
Please verify that the database server account has access rights on the
file
There is a problem with the repository connection information used to
start the service
Here is the detailed error message which contains the connection
information passed to the service:-
Cannot connect: user=DWHOWNR host=10.109.65.62 port=1521
service-name=DWHSTG
Please verify that this information is accurate
If this information is correct, then please use the
'set_repository_password.sql' script to reset the stored password
PL/SQL procedure successfully completed.
6) After login to OWB ,i have checked the Location,OWB Repository Location And Control center In OWB connection Explorer,
and all the connections are successful.
After this i took Control Centre from Tools and i tried to deploy one mapping.
And i got some error like below.
Name
Type
Status
Log
COPY_OF_ICDMAPFCTAWB
Description : Runtime User : ICGSTG Started : 2011-10-24 19:32:19.0
Name
Action
Status
Log
None
Error
Io exception: The Network Adapter could not establish the connection
None
Error
Io exception: The Network Adapter could not establish the connection
None
RECOVERY
RPE-01008: Recovery of this request is in progress.
Job Summary
Updated : 2011-10-24 19:32:19.0 Job Final Status : Completed with errors Job Processed Count : 0 Job Error Count : 0 Job Warning Count : 0
I think the issue is due to the wrong port number .
Can any one help me to solve this issue??
Edited by: 892899 on Oct 24, 2011 6:01 AM

Hi Allan,
Thanks for your quick reply.
I have checked in OWB\Locations\Database\Oracle\Location\DB Connectors and also in Control Center\Location\Connectors,seems like there is no connectors created.
Do you have any other suggestions?
Also i analyzed the UpdateControlCenter.sql in that
select value into v_connectiontype from cmpstringpropertyvalue_v where logicalname = 'CMPLocation_ConnectionType' and propertyowner = v_elementid;
the qry returns 'SQL*NET'.
Any workaround for these???
Please reply.

DM1 list of problems after 1 year - bad network adapter, touchpad, and headphone jack

I have a HP Pavilion DM1-3020 US laptop with Windows 7 64 bit Home Premium, 3 GB RAM.
After completing a factory re-install, I still have the following issues, after purchasing this computer only a year ago:
1) The network adapter simply stopped working, not sure if it shorted out or what. The wifi works, but the computer cannot detect or connect to an ethernet cable
2) The touchpad went off randomly and comes back on randomly. There is an orange light that indicates when it is off.
3) If i plug in headphones, music still plays through the speakers as though it doesn't know there are headphones, or it comes in and out between the speakers/headphones.
This computer seems to be plagued with issues, and I would like the above issues addressed, and the computer fixed or replaced.

If you do not have a warranty with HP, they will not do anything for you unfortunately.
This is a user to user forum, contact HP directly if you feel they can do something for you, sorry about your troubles.

Virtual Network Adapter (vEthernet) unauthenticated

Hi,
I have a problem, with configuring a Virtual Network Adapter on SC VMM.
I created a logical switch with two physical network adapter (team) and add a virtual network adapter to the logical switch. After that a virtual network adapter will be created on the hyper-v host, but with the status "domain.local (unauthenticated).
With another hyper-v host it work without problems.
I tried to remove and recreate all that stuff but without success.
Do someone know that problem? Or can help to find a solution?
Thank you for the help.
Br,
Andi

Hi Sir,
I searched for this issue but it seems none fits your case :
https://social.technet.microsoft.com/Forums/windows/en-US/ca343a3c-c61e-4816-9a96-d973386db2e2/network-shows-as-unauthenticatedchanged-my-network-profile-to-public
Did you try to manually configure teaming on that hyper-v host , still same result ?
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Network Adapter issue

Similar Messages

Maybe you are looking for